Mail no longer able to connect to server

Well, I'm stumped and at a loss as to what to do. I hope someone can help.
Without having changed anything, I can no longer connect to my incoming server and check mail (I can send just fine). I know the server is working as I can check mail on my daughter's iMac. My internet connection is also fine.
I removed the Mail folder from library as well as the .plist from preferences. Tried to set everything up again - fails when attempting to connect to the server. So it's not a corrupt preference file.
I logged into a Guest User account and received the same error when setting up an account, so it's not my user that's the issue. Firewall is off and nothing is blocking outgoing connections.
I only noticed this after updating my bootable clone, starting up from it and running DiskWarrior (no repairs needed). It was fine 30 minutes earlier. Booting back into my clone shows the same problem.
Cleared the Cache files and restarted - no change. I can't see what else I can do? If it's not in my user it must be in the System, but what? Help!!

Started up in 'Safe Boot' mode. Checked mail just fine!
Restarted again - it now works fine!!
Can anyone explain that?

Similar Messages

  • User no longer able to connect to afp shared drive

    I have upgraded our server to 10.7.1.  After about a week about 2/3 of our users are no longer able to connect to the shared drive using afp.  It worked fine for the first week and now several users cannot connect.  When attempting to coonect to the afp share it does not even attempt to authenticate.  Please help.

    Is the firewall service turned off? Can you connect to the localhost from the server itself (afp://127.0.0.1/) ?

  • After updating to 10.7.3 I am no longer able to connect to the internet.

    Updated to 10.7.3 this morning on my Macbook Air (Oct. 2010 model). After restarting, I am no longer able to connect to the internet. I can connect to the router, and pull a valid IP address (sometimes - other times I get an automatic private IP), but I am unable to get to any websites, check email, etc. I am able to ping websites AND visit websites using their IP addresses, but not using their DNS names.
    I called Applecare this morning, and the tech walked me through some troubleshooting steps, including:
    Rebooting into Repair partition to check connectivity there (same issues, no change)
    Deleting and recreating various config files (Networkinterfaces.plist, preferences.plist and com.apple.airport.preferences.plist) (no change)
    I've also tried reinstalling the update (both delta and combo), repairing disk permissions and rebooting into safe mode, nether of which has solved the issue.
    Also on the network are (Mini, not updated to 10.7.3), a PC, my iPhone and an Apple TV, all of which aren't experiencing any issues. Any ideas?
    Thanks.

    Here is something to try.  Boot into the Recovery HD by holding
    down Command+R when booting.  Select the get help online option.
    It initially opens Safari with a local web page, but you can use
    the bookmarks on the bookmark bar or even enter a website.
    Many extensions may not be available but it could tell you if
    it is your Lion install that is a problem or perhaps a hardware
    problem. 
    If you can browse around in this mode, then it could eliminate
    any possible hardware issues.  If you still have problems, then
    the issue could possibly be hardware/driver related.
    Give it a shot and see what happens.

  • I upgraded my iphone os into 5.1 I found out I'm no longer able to connect into my home Wi Fi....please help :(

    I upgraded my iphone os into 5.1 I found out I'm no longer able to connect into my home Wi Fi....please help

    Update router and reboot router.

  • Not Able To Connect Internet Using Ethernet Getting Not Able To Connect PPP Server

    I was able to connect to internet using ethernet,but suddenly it is not working when i try to connect it says not able to connect ppp server but i am able to connect same ppoe to windows machine

    Hello vivek.palamkar,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    http://support.apple.com/kb/ht1714
    Mac OS X: Connecting to the Internet With PPPoE
    Mac OS X: Troubleshooting a PPPoE Internet Connection
    Best of luck,
    Mario

  • DataSource at Report Server is not able to connect another server

    Hi All,
    I am having two servers on different Domain; One where my default SQL 2012 database Instance is present (say: Server 1), and another server where Report Server 2012 is installed (say Server 2).
    From Management Studio, I am able to connect database server 1 from server 2. Even I am able to Ping server 1 from server 2.
    But when I am creating Data Source at Report Server (Server 2), to connect Database Server (Server 1), I am getting below error:
    "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
    (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
    I using below connection string in Data Source:
    Data Source=SERVER1;Initial Catalog=msdb
    Below are the additional information:
    Server Instance Protocols on Server 1: Named Pipe, TCP/IP and Shared Memory are Enabled
    SQL Services on Server 1: SQL Server, SQL Browser are running
    Please help me on this.
    Thanks ,
    Avi
    -Regards Avi | Please kindly don’t forget to mark the post(s) that answered your question

    Are you really connecting to the msdb database in your connection string?  What is the user you are connecting to the database as when you are in Management Studio?  Is it an SQL user or a Windows user?  Maybe whatever credentials you are
    using in your datasource does not have access to the sql server?
    And is it Server 1 or Server1? or is that just an example server name.  I agree with trying the ip address but make sure you are using the same credentials as you do in Management Studio

  • My apple tv, all of a sudden, is no longer able to connect to my computer.  I have restarted EVERYTHING, multiple times, still not working.

    My apple tv, all of a sudden, is no longer able to connect to my computer.  I have restarted EVERYTHING, multiple times, still not working.

    Welcome to the Apple Community.
    Check your store location is set correctly, if this doesn't help, try restarting the Apple TV by removing ALL the cables for a 30 seconds.

  • Why can't I get my mail, I get a message "connection to server failed" but I can get on all other web sites.  It worked fine until about a month ago.

    WHY CAN'T I GET MY MAIL, I GET A MESSAGE 'CONNECTION TO SERVER FAILED" BUT I CAN GET ON ALL OTHER WEB SITES.  IT WORKED FINE UNTIL ABOUT A MONTH AGO.  I CANCELLED MY ACCOUNT, PUT MY INFO IN AGAIN AND STILL GET THE MESSAGE "CONNECTION TO SERVER FAILED"  HELP PLEASE!

    have you tried removing and readding the e-mail account? sometimes settings get corrupted or changed on the server end...something computers can sometimes handle better than the mail interface.

  • I use Yahoo mail - when I attempt to get mail I get the message "Connection to Server Failed."

    I use Yahoo mail on my iPad Air - when I attempt to get mail I get the message "Connection to Server Failed."

    Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
    Are you trying to access your mail on your regular internet connection or on a new one? I know I have issues accessing my yahoo mail via the mail app if I'm on and AT&T hotspot.  But if I use safari to go in via the mobile site (m.yahoo.com)  I can access my mail. And yahoo also has their own mail app. So the 'how' may help find the issue.
    If it's a new to you hotspot then the best way to fix it may just be to work around it (using safari)
    Another thing to do could be to go into the settings, mail, contacts and calendars and delete your yahoo address then exit out, go back in and add the account back. Sometimes things get confuzzled and the best way to fix it is just to start over. Doing this should not effect your  mail account, it just deletes it off your device and then adds the info back in.

  • I am trying to update Firefox, but haven't been able to connect to server. Keeps saying "connecting to server", but no connection after an hour of trying.

    Question
    I am trying to update Firefox per its suggestion, but haven't been able to connect to server. Keeps saying "connecting to server", but no connection after an hour of trying.

    Try running the combo update.
    10.9.5 Combo Update

  • Clients no longer able to connect

    Recently it appears most of our clients no longer are able to connect to our wireless network.
    I am assuming something changed for a certificate but not sure.
    The following is an attempt for a machine to connect. It does it's three tries then gives up.
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f Adding mobile on LWAPP AP 00:07:0e:38:9c:e0(0)
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f Association received from mobile on AP 00:07:0e:38:9c:e0
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f Applying site-specific IPv6 override for station 20:68:9d:9f:0b:4f - vapId 1, site 'WIRELESS', interface 'corporate_wireless'
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f Applying IPv6 Interface Policy for station 20:68:9d:9f:0b:4f - vlan 96, interface id 8, interface 'corporate_wireless'
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f Applying site-specific override for station 20:68:9d:9f:0b:4f - vapId 1, site 'WIRELESS', interface 'corporate_wireless'
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f STA - rates (4): 130 132 139 150 0 0 0 0 0 0 0 0 0 0 0 0
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f STA - rates (12): 130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f Processing RSN IE type 48, length 20 for mobile 20:68:9d:9f:0b:4f
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f Received RSN IE with 0 PMKIDs from mobile 20:68:9d:9f:0b:4f
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f 0.0.0.0 START (0) Initializing policy
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:07:0e:38:9c:e0 vapId 1 apVapId 1
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f apfMsAssoStateInc
    *apfMsConnTask_0: Feb 24 09:24:29.454: 20:68:9d:9f:0b:4f apfPemAddUser2 (apf_policy.c:222) Changing state for mobile 20:68:9d:9f:0b:4f on AP 00:07:0e:38:9c:e0 from Idle to Associated
    *apfMsConnTask_0: Feb 24 09:24:29.455: 20:68:9d:9f:0b:4f Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_0: Feb 24 09:24:29.455: 20:68:9d:9f:0b:4f Sending Assoc Response to station on BSSID 00:07:0e:38:9c:e0 (status 0)
    *apfMsConnTask_0: Feb 24 09:24:29.455: 20:68:9d:9f:0b:4f apfProcessAssocReq (apf_80211.c:4587) Changing state for mobile 20:68:9d:9f:0b:4f on AP 00:07:0e:38:9c:e0 from Associated to Associated
    *dot1xMsgTask: Feb 24 09:24:29.458: 20:68:9d:9f:0b:4f Station 20:68:9d:9f:0b:4f setting dot1x reauth timeout = 1800
    *dot1xMsgTask: Feb 24 09:24:29.458: 20:68:9d:9f:0b:4f dot1x - moving mobile 20:68:9d:9f:0b:4f into Connecting state
    *dot1xMsgTask: Feb 24 09:24:29.458: 20:68:9d:9f:0b:4f Sending EAP-Request/Identity to mobile 20:68:9d:9f:0b:4f (EAP Id 1)
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.476: 20:68:9d:9f:0b:4f Received EAPOL START from mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.476: 20:68:9d:9f:0b:4f dot1x - moving mobile 20:68:9d:9f:0b:4f into Connecting state
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.476: 20:68:9d:9f:0b:4f Sending EAP-Request/Identity to mobile 20:68:9d:9f:0b:4f (EAP Id 2)
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.481: 20:68:9d:9f:0b:4f Received EAPOL EAPPKT from mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.481: 20:68:9d:9f:0b:4f Received EAP Response packet with mismatching id (currentid=2, eapid=1) from mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.485: 20:68:9d:9f:0b:4f Received EAPOL EAPPKT from mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.485: 20:68:9d:9f:0b:4f Username entry (DOMAIN\user1) created for mobile
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.486: 20:68:9d:9f:0b:4f Received Identity Response (count=2) from mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.486: 20:68:9d:9f:0b:4f EAP State update from Connecting to Authenticating for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.486: 20:68:9d:9f:0b:4f dot1x - moving mobile 20:68:9d:9f:0b:4f into Authenticating state
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.486: 20:68:9d:9f:0b:4f Entering Backend Auth Response state for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.492: 20:68:9d:9f:0b:4f Processing Access-Challenge for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.492: 20:68:9d:9f:0b:4f Entering Backend Auth Req state (id=3) for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.492: 20:68:9d:9f:0b:4f Sending EAP Request from AAA to mobile 20:68:9d:9f:0b:4f (EAP Id 3)
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.496: 20:68:9d:9f:0b:4f Received EAPOL EAPPKT from mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.497: 20:68:9d:9f:0b:4f Received EAP Response from mobile 20:68:9d:9f:0b:4f (EAP Id 3, EAP Type 25)
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.497: 20:68:9d:9f:0b:4f Entering Backend Auth Response state for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.498: 20:68:9d:9f:0b:4f Processing Access-Challenge for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.498: 20:68:9d:9f:0b:4f Entering Backend Auth Req state (id=4) for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.498: 20:68:9d:9f:0b:4f Sending EAP Request from AAA to mobile 20:68:9d:9f:0b:4f (EAP Id 4)
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.510: 20:68:9d:9f:0b:4f Received EAPOL EAPPKT from mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.510: 20:68:9d:9f:0b:4f Received EAP Response from mobile 20:68:9d:9f:0b:4f (EAP Id 4, EAP Type 25)
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.510: 20:68:9d:9f:0b:4f Entering Backend Auth Response state for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.512: 20:68:9d:9f:0b:4f Processing Access-Reject for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.512: 20:68:9d:9f:0b:4f Sending EAP-Failure to mobile 20:68:9d:9f:0b:4f (EAP Id 4)
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.512: 20:68:9d:9f:0b:4f Entering Backend Auth Failure state (id=4) for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.513: 20:68:9d:9f:0b:4f Setting quiet timer for 5 seconds for mobile 20:68:9d:9f:0b:4f
    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.513: 20:68:9d:9f:0b:4f dot1x - moving mobile 20:68:9d:9f:0b:4f into Unknown state
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f Association received from mobile on AP 00:07:0e:38:9c:e0
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f 0.0.0.0 8021X_REQD (3) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f Applying site-specific IPv6 override for station 20:68:9d:9f:0b:4f - vapId 1, site 'WIRELESS', interface 'corporate_wireless'
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f 0.0.0.0 8021X_REQD (3) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f Applying IPv6 Interface Policy for station 20:68:9d:9f:0b:4f - vlan 96, interface id 8, interface 'corporate_wireless'
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f Applying site-specific override for station 20:68:9d:9f:0b:4f - vapId 1, site 'WIRELESS', interface 'corporate_wireless'
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f 0.0.0.0 8021X_REQD (3) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f STA - rates (4): 130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f STA - rates (12): 130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f Processing RSN IE type 48, length 20 for mobile 20:68:9d:9f:0b:4f
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f Received RSN IE with 0 PMKIDs from mobile 20:68:9d:9f:0b:4f
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f 0.0.0.0 8021X_REQD (3) Initializing policy
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_0: Feb 24 09:24:30.122: 20:68:9d:9f:0b:4f 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:07:0e:38:9c:e0 vapId 1 apVapId 1
    *apfMsConnTask_0: Feb 24 09:24:30.123: 20:68:9d:9f:0b:4f apfPemAddUser2 (apf_policy.c:222) Changing state for mobile 20:68:9d:9f:0b:4f on AP 00:07:0e:38:9c:e0 from Associated to Associated
    *apfMsConnTask_0: Feb 24 09:24:30.123: 20:68:9d:9f:0b:4f Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_0: Feb 24 09:24:30.123: 20:68:9d:9f:0b:4f Sending Assoc Response to station on BSSID 00:07:0e:38:9c:e0 (status 0)
    *apfMsConnTask_0: Feb 24 09:24:30.123: 20:68:9d:9f:0b:4f apfProcessAssocReq (apf_80211.c:4587) Changing state for mobile 20:68:9d:9f:0b:4f on AP 00:07:0e:38:9c:e0 from Associated to Associated
    The line item that stands out is *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.481: 20:68:9d:9f:0b:4f Received EAP Response packet with mismatching id (currentid=2, eapid=1) from mobile 20:68:9d:9f:0b:4f
    But I am not seeing where the problem lies.
    Thanks

    *Dot1x_NW_MsgTask_0: Feb 24 09:24:29.512: 20:68:9d:9f:0b:4f Processing Access-Reject for mobile 20:68:9d:9f:0b:4f
    You need to check your RADIUS server logs as WLC proces the ACCESS-REJECT coming from that. In Radius log it should say why client get rejected.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Bb Traffic not able to connect to server

    Has anyone else had problems using Traffic over the last week or so? I keep getting the message Unable to reach server.
    At first I thought it might be weather related, but it is also happening when the weather is clear and visibility high, so now I am not so sure, as it could be a server outage of some kind.
    Any suggestions? I've called Verizon and got the usual ' We don't see any issues on our side to account for this' message, I.e., they are pointing back to RIM.
    /Bill

    I have schema whose name is touchpoint and password is touchpoint1.This particular schema is on the server as described previously.When I am tring to connect this schema from sequel developer It is working fine but the same thing when I am tring to connect from the sequle*Plus env by **touchpoint/touchpoint1@dev1** I am not able to connect.
    I am using 10g only.This is the error I am getting
    SQL> connect touchpoint/touchpoint1@dev1;
    ERROR:
    ORA-12154: TNS:could not resolve the connect identifier specified
    Warning: You are no longer connected to ORACLE.
    SQL>
    Please tell me if U need any more clarifications
    Thanks
    Edited by: Prafulla on Jan 19, 2011 4:19 AM

  • No longer able to connect to Yamaha RX-V675 amp from Apple devices

    Sorry for the length of this post, but I wanted to get everything down in one hit and I REALLY need some help as it's driving me nuts!
    I have been happily connecting to my Yamaha RX-V675 amp from my Macbook Pro (2010) with no problems since I bought the amp a year or so ago - connected through iTunes > Airplay and it also appeared as a device in my System Preferences > Sound menu. I was playing music from the Remote app on my iPhone (6)/iPad (2) and was always able to connect, which I believe routes through iTunes/MB rather than the device itself.
    However, I noticed the other evening in iTunes on the MB that the Airplay menu had turned orange, but I wasn't using it so I didn't think anything more of it. Since then I've tried to connect and the Airplay option no longer appears, nor does the amp appear as a device in the Sys Pref > Sound menu. As an aside, connecting to the amp directly via Airplay from my iPhone and iPad has always been flaky - sometimes I would see the amp as an Airplay device but many times I wouldn't, to the point that I have given up trying.
    I also have a Synology Disc Station and I can use the DS Audio app on my iPhone/iPad to play music on the same amp via Airplay. Both the amp and MB are hard wired on my network, plus I have checked my router a number of times and the amp always shows up as connected (plus I can ping the amp and access its web console from a browser on my MB), so there is nothing wrong with the network connectivity of the the devices. I have tried all suggestions made in another similar post, including changing the name of the network on the Yamaha amp via it's web portal, which seems to have worked for many people but made no difference for me. I've also updated both OS X and iTunes with the latest updates, but it's made no difference. I can still however connect via the DS Audio app over Airplay every time.
    Even though I can connect via DS Audio, the app itself is a little clunky and I would really prefer to use Remote/iTunes as it is much slicker and previously worked a treat. Does anyone have any other suggestions? Any help would be very much appreciated as I losing a lot of hair over this!

    excuse me, not linksystem, its a verizon FIOS wireless router & modem as part of the package. i was thinking my old setup.
    new system...cant edit my posts....?

  • No longer able to connect to Itunes store. Diagnostic included.

    I used to be able to connect to the Itunes store but cant now. I have checked and itunes IS allowed through my firewall. Maybe you know something that I dont? When I run diagnostics it says "secure link to itunes store failed" and this is the diagnostics;
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.5.2.11
    QuickTime 7.6.8
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0016AB1C03A4D988
    Current user is not an administrator.
    The current local date and time is 2012-01-10 14:00:17.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {C3DC8ABD-BD12-4DE0-AD67-1EDCAF51667A}
    Description:    Atheros AR9285 802.11b/g/n WiFi Adapter
    IP Address:    10.19.251.120
    Subnet Mask:    255.255.0.0
    Default Gateway:    10.19.0.1
    DHCP Enabled:    Yes
    DHCP Server:    10.100.0.25
    Lease Obtained:    Tue Jan 10 12:54:00 2012
    Lease Expires:    Wed Jan 11 12:54:00 2012
    DNS Servers:    195.226.228.72
            195.226.228.74
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-01-10 13:54:19.

    When disabling the firewall, same problem. with this diagnostic;
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.5.2.11
    QuickTime 7.6.8
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 003EA7DC033727B0
    Current user is not an administrator.
    The current local date and time is 2012-01-10 14:08:55.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {C3DC8ABD-BD12-4DE0-AD67-1EDCAF51667A}
    Description:    Atheros AR9285 802.11b/g/n WiFi Adapter
    IP Address:    10.19.251.120
    Subnet Mask:    255.255.0.0
    Default Gateway:    10.19.0.1
    DHCP Enabled:    Yes
    DHCP Server:    10.100.0.25
    Lease Obtained:    Tue Jan 10 12:54:00 2012
    Lease Expires:    Wed Jan 11 12:54:00 2012
    DNS Servers:    195.226.228.72
            195.226.228.74
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was unsuccessful.
    The network connection timed out.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-01-10 14:04:10.

  • Not able to connect to server from word 2003

    Able to connect directly thru the web but not via the Microsoft word.
    The BI Publisher link is displayed
    After entering the user name,Password and Report Server Name
    When trying to click LOGIN Nothing happens
    Could anyone answer this please. Is it related to Microsoft word version , Do i have to install any plugins.

    Hello Sandeep Ji,
    In my system having java environment, Oracle 10g database and OC4J with Oracle 10g developer suite.
    I want to learn to use Oracle BI publisher for making reports.
    Today i have installed Oracle BI publisher desktop for making reports in ms-word 2007. when i try to log on in BI Publisher option in ms-word. It ask for username, password & report server url.
    Should i need to download & install BI Publisher Enterprise server (Stand Alone) to fill up the report server url details?
    Thanks!

Maybe you are looking for

  • Problem in Variable Substitution (Receiver File Adapter)

    Hi, I am facing problem in the variable substitution in receiver file Communication channel. My expected file name is A_C.xml; but my actual output filename obtained is C_C.xml for the below example target file: <ProductionSch> <CustomField> <value>

  • 1KEK transfer of Receivables in 2011

    CO experts, We made the proper configuration in SAP to start using tcode 1KEK so that we can start using the balance sheet reports broken down by profit center. All this time we were transferring balance sheet accounts thru 3KEH, which all it did was

  • XML = ABAP conversion error (CX_ST_GROUP_MISSING_CASE)

    Hi , we are using wsdl connection We are not able to display data in SAP its showing error : Error during <b>XML => ABAP conversion</b> (Response Message; error ID: CX_ST_GROUP_MISSING_CASE; (/1SAI/TXS00000000000000000010 XML Bytepos.: 205 XML Path:

  • Could AS3 call C++ functions in .dll?

    Hi there, Could I do: write some C++ functions and compile them into a .dll file; then call these functions from Actionscript3.0?? If yes, how can I do that? Thanks a lot.

  • How to connect MM purchasing to poratal

    Hi expersts, v r using portal to connect with purchasing in mm .how to connect portal to purchaing where can i find the link in custamization? like from portal after slecting purchasing while we clink on information v r ubale to enter into the relatd