Mail no relaunching after force quit - Yosemite

Had to Force Quit mail in Yosemite because Print PDF to mail crashed the app. Now cannot relaunch Mail. Just sits in the menu bar and cannot click on it.
Have to restart the computer...

Try the following;
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If DU cannot fix the sibling link error (it may not) and you don't have Disk Warrior then you may attempt this suggestion: Fix Invalid Sibling Link.
If these all fail then you will have to reformat the drive and reinstall OS X from scratch. You may be able to recover your personal files if your computer has a Firewire port, and you have access to another Mac with a Firewire port. You can then use Target Disk Mode to try and access the drive on your computer and copy off your personal files.

Similar Messages

TS3276 hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened.

After force quitting iTunes, now my phone is "in use" by another user

OK, here's what just happened to me tonight. I had the "beach ball of death" in iTunes, so I used a force quit. Now when I plug in my week old iPhone 4, I'm getting the message that this phone is already in use by another user on this computer. Huh?!? For one thing, I am the ONLY user although I do have a "guest" account, but I'm logged in on my regular account.
I've tried restarting iTunes, same message. Every time I plug in the phone it's doing it now. So, how am I supposed to sync my phone now?
Has anyone else had this problem after force quitting iTunes? Any ideas?

Nope, tried that, didn't work. 3 complete reboots didn't worked either. However, on the 4th complete computer reboot, it worked!! I don't know why, but I'm happy that I can sync again.
I guess it just reinforces the old, "if at first you don't succeed...."
{:)

Hi tutor,my system preferences remains in hang and it does not respond even after force quit.May i have a advice la

my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la

Hello: Welcome to Apple Support Communities!
Could you specify the Mac OS X version and also what computer you
are using it on, with some detail? Some of these kinds of issues, while
they may seem the same across various years of OS X, can have
different causes and also different cures.
With that information, someone may be capable of researching a reply
most suited to try & see if it works in your computer + OS X system.
One idea, which may/may not help, would be to start the computer
from its most recent OS X DVD install disc, unless it has OS X 10.7
or Later, where there is a Recovery partition on the HDD to boot from.
Then use Disk Utility> repair disk, while there, also repair permissions.
Thanks.
Good luck & happy computing!

ITunes 7.0.2 relentlessly relaunches after I quit it.

iTunes 7.0.2 relentlessly relaunches after I quit it. in 2 seconds.
only way to quit it is to log out / in - but once iTunes is launched, it prefers to stay that way.
help?

Re: iTunes 7.0.2 relentlessly relaunches after I quit it. .
Answered for now, unless problem returns.
It had started days ago.
The following did not help:
Disabled Sing That Tune! widget
Uninstalled Speedit and Core Duo Temp.
These were restored prior to discovering my hopeful fix(es):
The following seemed to help:
Disk Utility couldn't complete permissions nor disk verification. Rebooted in safe mode. Opened & closed iTunes 7.0.2 normally (Firefox 2.0 not used).
Rebooted normally. Cache files appeared in trash, not there before. Cool. Disk Utility: Verified Permissions and Disk, no repairs needed.
Opened & closed iTunes normally (Firefox again not used). Yay!
Macaroni had repaired permissions yesterday. I'd read iTunes no longer handles that properly, disabled it in Macaroni to leave iTunes alone for immediate future.
Began suspecting FoxyTunes 2.0.4 (current version) add-on for iTunes control from within FireFox 2.0 [Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-US; rv:1.8.1) Gecko/20061010 Firefox/2.0.]
Once FoxyTunes is activated iTunes WILL launch. I prefer that as I'm indicating I want to use iTunes.
But sure enough - I disabled FoxyTunes' 'Update Title and Volume on Startup'. This means Firefox 2.0 startup! It drove me crazy! Problem ALMOST solved.
However - once FoxyTunes is active (as above or by mouseover) and iTunes is quit, iTunes WILL Re-launch RELENTLESSLY after each time it is quit - until Firefox is quit!
I also set FoxyTunes to auto-hide as much of itself as possible, but left it in FireFox's status bar. For now.
I'm copying this to FoxyTunes. It seems iTunes should NOT be launched by FoxyTunes until a command is issued. Mousing over or viewing FoxyTunes menus should not do it.
Thanks.

Preview is STILL frozen even after force quitting, rebooting and reopening. Help?!? I need to see my files!

Not sure what I did, but Preview continues to stay frozen even after force quitting, rebooting and reopening. It seems like it is trying to open all 720 pdf documents I have on my internal memory. That's my best guess... I really don't know what happened. I've tried clicking the 'close windows when closing application' option under general settings and every other thing I've seen listed on help sites... nothing is working. PLEASE HELP?!?

Back up all data. Quit Preview if it's running.
Hold down the option key and select Go ▹ Library from the Finder menu bar. From the Library folder, delete the following items, if they exist:
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Log out and log back in. Launch the application and test.

Premiere freezing and delayed playback, plays audio after force quit

I'm working with 350 hours of AVCHD c100 and h264 from 5D. The media is on a thunderbolt RAID 1 and I'm running CC 2014 on a 2014 Mac Pro with 6 cores, 3gb GPU and 32GB ram.
After about an hour of editing, I get delayed playback, and delayed response from keyboard or trackpad input. I can save - and after that I've waited up to a half an hour while the program is frozen. If it froze during playback, the audio continues to play through the system even after force quit. The only way to start over is a system restart.
any ideas? I've had trouble moving projects in the past, and media cache issues were to blame for similar symptoms, but it's much worse this time

First two things to check are permissions and prefs.
Prefs: go to Documents/Adobe/Premiere Pro/8.0 and rename the folder "<username>-Profile." When you launch PPro, all new prefs will be written.
Permissions: fixing permissions problem that impedes start of Adobe applications | After Effects region of interest

Getting beach ball with mail 5.3, must force quite each time. Any ideas?

getting beach ball with mail 5.3, must force quite each time. Any ideas?

Hello pjdsmith,
Thank you for using Apple Support Communities.
Here is a good article for troubleshooting email issues. Because there are a number of things that might be causing it, this article is good because it covers a number of possibilities.
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
Regards,
Jeff D.

Pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP

pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP
i was working on a document with pages. while transferring files from USB, the 'pinball' thing popped up for the longest time which lead me to force quit the document. the document had been saved before quitting. however, my macbook starts to reboot, and after rebooting that specific file is missing. Before it quit, it says that the file is locked and asked me to create a duplicate, which i clicked yes to.

Hi,
just to say that while waiting for a help
I decided to go back from zero and moved to a second network (thanks i got some few computers available for my tests ) and this time i run in another trouble wich is the subject of a former post (with no reply...) <<HELP!! "Checksum failed" & "Integrity check on decrypted field failed ">>
http://forum.java.sun.com/thread.jspa?threadID=791804&messageID=9468957#9468957
Seems this always just leads us to problems...
Strange Sun Java Security Team just won't do anything to help us deploy quite easily on one of the most widely-spread platform ( despite we don't like them that much it's MS servers (2000 and 2003) )
Anyway if one could help... on one of the two issues Thanks

Mail application does not respond even after forcing quit over and over

My mail application is not responding. I have forced quit at least 5 times and I still get the beach ball. This just started happening 2 days ago and now I can't access my mail at all.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Reopening mail after force quit

Dear Forum,
I force quit mail and can't reopen the application. The message dispalyed is 'application not responding'. How do I resolve this and start receivng mails again?
Thanks.
Leks_T

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

IPhoto doesn't update to modified pics after force quit

iPhoto didn't respond to my 'quit' command, so I chose to +force quit+ it. Before I did so, iPhoto had a problem connecting to Facebook, which seemed to cause iPhoto not being able to quit (this happened to me several times recently, and I always had to end up force quitting iPhoto). Every time I clicked on an album under FACEBOOK on the left column of the iPhoto application window, an error message came up saying +"Facebook authentication with server failed. Please check your login and password information."+ I thought perhaps stopping iPhoto from syncing with Facebook would help, so I +removed my Facebook account from iPhoto+, in an attempt to set up the connection again where I would re-enter my login and password information.
However, after this, when I clicked on a photo and then clicked the Facebook botton on the bottom right corner, then clicked *Set Up* in the message box to +set up iPhoto to publish to Facebook+, the Facebook login box never completed loading (it was all white and plank besides the loading bar on the bottom which never exceeded loading more than about 12%). I waited for more than half an hour and the loading didn't process any longer, so I closed the box. I tried this for several times in the next few hours and the same loading problem came up each time.
In the mean while, the Faces under LIBRARY in iPhoto had an +updating circle+ next to it which seemed never able to end the search. So I did some search over the Internet to find solutions to the problem, and came across with this: _http://discussions.info.apple.com/thread.jspa?threadID=2444899_.
The problems now were that 1) iPhoto could not load me to the Facebook login page for me to re-enter my Facebook information for iPhoto; and 2) iPhoto could not quit.
Because the solution posed on the above link has a first step of "quit iPhoto", so I force quitted iPhoto and followed the 1) to 6) processes stated in that thread (i.e.: removed ~/Library/Caches/, ~/Library/Preferences/com.apple.iPhoto.LSSharedFileList.plist, and ~/Library/Preferences/com.apple.iPhoto.plist to trash; deleted iphoto.apple.com inside Keychain Access; restarted computer; and launched iPhoto again).
This time I could come to the Facebook login page on iPhoto, and quit iPhoto for no problem. However, I now find that some of the pictures I edited within iPhoto before force quitting do not show the modified versions when I open them, even though the +modified versions+ are shown in thumbnails and they can be located in +iPhoto library+ (~/iPhoto Library/Modified/year*/album name/picture name*). The other weird thing is - the problem does not occur to all photos I edited before force quitting (e.g. for two photos I edited one after another, one has the problem and the other does not).
I did some search over the Internet before posting this message, and found one to be a possible solution to my problem: _http://discussions.info.apple.com/thread.jspa?threadID=2771968&tstart=15_
Nevertheless, I'm a bit resistent to downloading +iPhoto Library Manager+ in thinking of the down sides of doing so, if there are any. What would be the best way to solve my current problem? How could I get iPhoto to recognize and link to the modified photos instead of the original files? By the way, I did not have this problem before force quitting iPhoto.
Thank you in advance for all your inputs!

i'd like to keep all modified files because it took me quite some work to edit the pictures
Then recover them from the damaged Library and import them to the new one. That said, remember they will be treated as "new" photos, not as edited versions of the others. There is no way to recreate that link.
1) Would it be bad for me to keep working with my old iPhoto library?
This library is corrupted. It is known to be damaged. The chances of dataloss are greatly increased. You will have more problems. Personally, I wouldn't.
2) How to *back up*? And I assume it should be conducted regularly?
*Most Simple Back Up:*
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
*Slightly more complex:*
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
*I'm Serious about Back Ups.* +And you should be too.+
My Library lives on my iMac. It’s Backed up to two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected.
I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
My Photos are backed up online. There are many options: Flickr, Picasa, SmugMug etc. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you may need to pay.
Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a trial restore.
3) Should I un-do the removal of ~/Library/Caches/, ~/Library/Preferences/com.apple.iPhoto.LSSharedFileList.plist, and ~/Library/Preferences/com.apple.iPhoto.plist, as well as the delete of iphoto.apple.com inside Keychain Access?
No.
Regards
TD
R

Lost ability to access iTunes via Airport after Force Quit - Network issue?

I am not sure if this is iTunes or networking related, but all other networking appears ok.
First my setup: multiple machines use iTunes library from an external HD connected to Airport Extreme, OS 10.4.11, iTunes 7.6.2.
I had been updating ratings in the iTunes library on the external drive connected to the AE and I was connected to the AE via Ethernet with Airport Card on PB turned off. I went to move the PB to another location so I turned Airport Card on and disconnected the Ethernet cable with the iTunes app and database open (dumb move apparently). The iTunes app appeared to lock up along with the PB, I was able to force quit thru it, and now I have an unresolved issue that has me stumped.
After numerous restarts of the PB, I can access the iTunes library on this AE server via the ethernet connection (as it was before attempting to move), and all of the ratings I had changed appear to have been saved. But I can not get iTunes to access the library via wireless (Airport Card).
I have restarted the AE and the connected drive both. I have restarted the PB numerous times. If I login on PB with ethernet connected there is no issue, if I login with airport active only there is an issue. All attempts to start iTunes and accessing the library wirelessly result in no success, sometimes can quit normally, sometimes must force quit. I can option start iTunes to access/create library on internal drive and also can create a new library on the external AE server. Also all other wireless networking activity regarding that server has no issue (access , copy, move files etc...)
I've tried removing iTunes pref files in user library and that didn't fix anything. The application itself works fine with the database when connected via ethernet or with internal library.
Anyone have any clues or suggestions on where I should turn to try and fix this? I can try to provide more details if needed, but I am stumped short of potentially aggravating the issue with re installs and other potential attempts that may not even be related to the issue.
Thanks

No disk maintenance recently. I have a week old backup of the entire iTunes folder along with the Library. I tried moving that backup Library (file only) into the AE server location but that did not change anything in terms of access.
I am on lunch break so no time to try your suggestions immediately, but will later this evening. I had thought about trying with a new user but hadn't gone there yet. I also have a G4 iMac ethernet connected all the time to the AE, but it has a AE card also typically not in use. I tried accessing with the iMac machine wirelessly, and although it progressed further (got the iTunes menu bar to display - never even got that on the PB), iTunes was not able to load which makes it almost seem not machine specific but rather something with the AE settings or the usb connected drive, but again all is fine there via ethernet.
Last night after original post, on the PB, I thought about a corrupted keychain type thing perhaps not allowing file access wirelessly, and I did have something to repair there, but it did not solve the issue.
Again, thanks for the suggestions and I'll try later tonight. Let me know if my additional info sheds any further light or if it would indicate that the suggestions were on the wrong track.
Dave

Lost ability to access iTunes via Airport after Force Quit

I am not sure if this is iTunes or networking related, but all other networking appears ok.
First my setup: multiple machines use iTunes library from an external HD connected to Airport Extreme, OS 10.4.11, iTunes 7.6.2.
I had been updating ratings in the iTunes library on the external drive connected to the AE and I was connected to the AE via Ethernet with Airport Card on PB turned off. I went to move the PB to another location so I turned Airport Card on and disconnected the Ethernet cable with the iTunes app and database open (dumb move apparently). The iTunes app appeared to lock up along with the PB, I was able to force quit thru it, and now I have an unresolved issue that has me stumped.
After numerous restarts of the PB, I can access the iTunes library on this AE server via the ethernet connection (as it was before attempting to move), and all of the ratings I had changed appear to have been saved. But I can not get iTunes to access the library via wireless (Airport Card).
I have restarted the AE and the connected drive both. I have restarted the PB numerous times. If I login on PB with ethernet connected there is no issue, if I login with airport active only there is an issue. All attempts to start iTunes and accessing the library wirelessly result in no success, sometimes can quit normally, sometimes must force quit. I can option start iTunes to access/create library on internal drive and also can create a new library on the external AE server. Also all other wireless networking activity regarding that server has no issue (access , copy, move files etc...)
I've tried removing iTunes pref files in user library and that didn't fix anything. The application itself works fine with the database when connected via ethernet or with internal library.
Anyone have any clues or suggestions on where I should turn to try and fix this? I can try to provide more details if needed, but I am stumped short of potentially aggravating the issue with re installs and other potential attempts that may not even be related to the issue.
Thanks

permissions issue with iTunes Library file

Mac Lion Version 10.7.3 not Restoring Windows after force quite

I am getting following error after opening Ooo (Open Office org)
"The application “OpenOffice.org” was forced to quit while trying to restore
its windows. Do you want to try to restore its windows again?"
And nothing is happening after pressing both available button "Restore Windows"
or "Don't Restore Windows".
Even when i am trying to shot down my system Ooo stops me for doing that.
I have to force quite it before restarting/shutting down my system.
Nothing is happening when i am trying to opening any doc or xls file i am
getting same window every time.
I have also tried to install new updated version of Ooo, but problem still
exist.
Steps I followed.
1- Selecte OOo from application list and Make move to trash.
2- Selecte OOo folder from /Users/Fauad/Library/Application Support and make
move to trash.
3- Empty the trash.
4- Install OOo new version.
5- Run it
I have read post about command for terminal like rm -rf .DS_Store
i have tried running it in Appplication, Library/Application support, or on Desktop as well but nothing changed.
As far as i remember the problem is because i have forced quite all open application before shtting down my system.
Please help me how to solve this problem.
Message was edited by: fauad

Fixed it.
It is OS based problem, since MAC Lione store application state when closing
it.
Solution Steps:
1- Move to trash OOo from application folder.
2- The Library folder is hidden by default so use chflags nohidden ~/Library/
command to unhide it.
3- Move to trash all files which contains OOo in there name from users Library
folder and sub folders.
4- Reinstall OOo.
5- Launch Working

Mail no relaunching after force quit - Yosemite

Similar Messages

Maybe you are looking for