Mail not allowing aol connection?

I suddenly am unable to connect to aol, but can get to my exchange and mobile me accounts. Any thoughts on what would have caused this over the last three days? I did install Mackeeper around this same time. Is there a possible conflict?
Thanks.

Since I'm seeing three different people with the same problem posting today, all within the top 20 messages on this forum, I'm guessing it's an AOL problem. Check with them.

Similar Messages

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

Not allowing bluetooth connection to car hands free

Hi
I have a blackberry curve 8520 and a Bury hands free kit.
Normally as soon as the car is switched on the Bury comes on and starts searching for the blackberry and finds it immediately over the bluetooth and connects without any trouble.
Recently it no longer does this. Now I have to stop the Bury auto searching, turn off the blackberry bluetooth and then turn it back on for the bluetooth to connect.
If I allow for the Bury to keep searching you can see in the wireless networks screen that if briefly connects for a second and then disconnects and continues to do this.
I have restored the Bury to factory reset and it is not the Bury device because my Blackberry Pearl connects fine without any problem, it is my other phone that won't connect.
I have deleted it out of devices, played around with encryption settings and tried every setting I can see.
What is going on? why is my curve not allowing a connection to be made? I don't understand what can have happened for it to suddenly not work.
Any help would be great.
Thanks

as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

SQL Developer Blocked and is not allowed to connect to database ORA-200001

SQL Developer Blocked and is not allowed to connect to database gives ORA-200001.
i found on net that DBA can write triggers which can deny connection to database from certain appplication.
so i want a way to change application name so that when it connects to database
the V$SESSION will have different value (other than SQL Developer) in column PROGRAM and/or MODULE (which i think is used by dba to restrict the connection).
one more way is
i am using jdbc url to connect to database
in java we can change properties of connection to change the PROGRAM in V$SESSION.
but i am not java expert so dont know how and where to make the changes
either way my aim is to connect to database such that V$SESSION will have different value (other than "SQL Developer") in column PROGRAM and/or MODULE

This is not system configration or credential issue.
This is a check which is put DBA using logon trigger
to check certain user loging in using certain application.
only some users using particular username are getting this error when they try to logon using oracle sql developer
the same users when uses different username(some generic user names created to access database) to access the same database then they are able to login.
similarly if they login using SQL navigator they are able to login with both their own and the generic user name
more over of all the database instances this is only happening on some of the instances and all of them are development instances.
following will help you understand
USER | DBUSERNAME | DATABASE | APPLICATION | ACTION
X | X | DB1 | Oracle Sql Developer | Blocked
X | G(Genric) | DB1 | Oracle Sql Developer | Login Success
X | X | DB1 | Sql Navigator/SqlPLus | Login Success
X | G(Genric) | DB1 | Sql Navigator/SqlPLus | Login Success
X | X | DB2 | Oracle Sql Developer | Login Success
X | G(Genric) | DB2 | Oracle Sql Developer | Login Success
X | X | DB2 | Sql Navigator/SqlPLus | Login Success
X | G(Genric) | DB2 | Sql Navigator/SqlPLus | Login Success
I just want to bypass this check which i think uses V$SESSION and columns PROGRAM and/or MODULE to check the application used by particular user.
if i can override these values some where in oracle sql developer before loging in the DB then i can clearly pass this check and login to database.
Edited by: user13430736 on Jun 21, 2011 4:05 AM
Edited by: user13430736 on Jun 21, 2011 4:12 AM

Untrusted apps are not allowed to connect to or launch Window Server before login.

I'm getting this with the Citrix Receiver uninstaller from the command line... but not on all Mountain Lion 10.8.5 systems. Googling turns up a lot of ideas about a problem with the app or in pre/post-flight scripts, but since it works on some, I wonder. What is the mechanism that generates this error? I'm guessing there's some setting or condition that exists on one system that isn't true on the other. How do I find out?
Sep 25 10:55:21 palms sudo[74325]: joliver : TTY=ttys000 ; PWD=/Users/joliver ; USER=root ; COMMAND=/Volumes/Citrix Receiver/Uninstall Citrix Receiver.app/Contents/MacOS/Uninstall Citrix Receiver --nogui
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: 3891612: (connect_and_check) Untrusted apps are not allowed to connect to or launch Window Server before login.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorFailure: This user is not allowed access to the window system right now.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
Sep 25 10:55:21 --- last message repeated 3 times ---
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSRegisterConnectionNotifyProc called with invalid connection
Sep 25 10:55:21 --- last message repeated 2 times ---
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetDockRect: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetCurrentDisplayMode: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSSetConnectionProperty: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: Error enabling suspendResume handling

Contact Wacom. Unless they have updated drivers there is no workaround.
Update or remove Quicksilver.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

11i does not allow incoming connections (sqlplus)

I just installed Oracle EBS 11i on RHEL AS4. I have a laptop(windows running oracle client tools) that I use to connect all my oracle-db instances. However, my newly installed apps 11i won't let me connect using sqlplus or any other client from my laptop (or any other client machine for that matter). Again, I am trying to access the tables not the forms interface using jinitiator. Here is the error message I keep getting: "TNS 12537 Connection closed"
I see that discoverer related processes started when I started the apps. Is there a discoverer admin console that I can use? Also can I install discoverer plus or discoverer desktop to connect to the descoverer running on the apps server? Can I view the existing Discoverer reports using a browser?

Thanks for your reply. My SQLnet access option is set to "ALLOW_ALL" and I was still not able to connect. That is why I manually added a line to "sqlnet.ora" file. I bounced the listner and now it is allowing the connections from client machines.
I am able to see the discoverer reports using the "Discoverer Viewer 4i" that comes with the EBS. I want to set up new reports or edit the existing ones. Do I do this using any interface provided by EBS or do I have to use the discoverer desctop or discoverer plus on a seperate client machine? Also, how do I access the discoverer admin that comes with EBS?
Thanks!

WRVS4400N does not allow wireless connections

I've had the WRVS4400N for about six months. Three times in the past two months I have had to factory reset the device and reconfigure it because it would not allow any wireless connections. Perhaps unfortunately I applied the latest firmware update about a month before these problems began. Is there any work-around or setting change that I can make to avoid this problem? When wireless connections are impossible the device is still reachable via the ethernet connection.

If only the wireless is dorpping on the unit then, most probably a firmware concern. Try reflashing the firmware again if that helps. Also try to change some of the advance wireless settingso nthe router, set the RTS and fragmentation to thresholds to 2306 as well as teh beacon interval to 50.

Mail not allowing quit

Not allowing quit,
Got imap and pop folders,
on one impa one i wanted to delete the 3000 spam messages and then sync with imap server but i cant tell if its not quitting because of that, as i cant see where it is communicating (i knew on outlook)
Any advice or tips would be helpful

Since Mail does respond to user input, it'd be better to try to quit it by normal means. Try canceling the synchronizing process by clicking on the red stop icon at the right of the progress indicator of that activity in the Activity Viewer window. It may take a few minutes (not hours) for Mail to actually cancel the synchronizing process.

Mail not allowing to delete aliases

Mail is not allowing to delete aliases, my aliases are not listed in Mail/preferences/accounts. I verified and they are all active.
If I try to add an alias, I tells me thatI have to wait a week for the last deletion to clear and I have not deleted any yet and I have not used all my aliases yet.
HELP !!!!!

This posting shows how to prevents lines of code from being removed.
http://www.jroller.com/page/santhosh/Weblog/document_guard?catname=
You might be able to customize it for your requirements.

Mail not allowed by smtp server

My mailserver is not allowing to send mail in 10.7.6 In 10.6.8 everything is fine.
I cannot find any solution on the net, nor what I can be doing wrong.
The provider has no answer ether. The server works fine (tested it with webmail and other computer)
Wonder what to throw away to let it work.(never worked before in 10.7.3)
Using older system for mail now, but like to switch to Lion.
regards, Erik

Thanks Glenn,
I found it. It seems my server did not like a password when sending mail. I did not send any password but somewhere in the system it got stuck. So I changed password in advanced settings to APOP. Then I good send 1 message to myself and on the way back to the computer it gave the error.Server thus not suppor password. So I flipt it back to password. And now I can send and recive. It thus not make sense to me but it seems to work. It took some hours. My mail provider is UPC with pop3 and smtp.
Regards, Erik

Financial Reporting Studio not allowing to connect to Essbase server

Hi All,
I have installed 11.1.2.2 HFR studio (32 bit installed via workspace) on my machine and After logging in the Studio,
when I try to create the Essbase connection in it, it throws me following error:
"Failed to Connect to server"
"Error connecting to database connection connection_name: Error: Error getting CSS support information for driver [com.hyperion.ap.aps.Driver]"
Any idea to solve this.
I tried following , but this is also not helping:
-- Run the batch script HRRunAnt.cmd in the directory "D:\Oracle\Middleware\EPMSystem11R1\products\FinancialReportingStudio\products\financialreporting\install\bin"
after installation
Warm Regards,
Amit Porwal

Hello Celvin,
Thanks a lot for your reply to this post.
Actually, We have foundation on One machine and Essbase on different machine.
So we have installed (R&A) FR on machine where we have Foundation installed.
Also my Essbase machine is having Two instances of Essbase running on it, one on 1423 port and other on 1424 port.
My Environments:
MACHINE 1: Foundation + FR (FR Studio throwing error while creating essbase connection to MACHINE 2, but works opk with VM Machine)
MACHINE 2: Essbase (Two instances, one on 1423, other on 1424 port)
VM Machine: Essbase + foundation + FR on same machine (FR Studio works fine here)
Now, as per the suggested links,
2nd option-->)
we were not having the "admaps.jar" file on Foundation MACHINE 1
. so I copied this file from my other working environment (VM Machine), but I am getting error: "Failed to connect to server" when I try to create an Essbase connection on FR Studio installed on same Foundation Machine 1 to any ESSBASE instance of MACHINE 2.
So, I thought to try the below 1st option as well.
1st option-->)
I tried to set the registry values on foundation machine (FR installed), but very strang, we are not having any Folder in
"HKEY_LOCAL_MACHINE\Software\Hyperion Solutions\FinancialReporting0\HyS9FRReports"
I really Don't know how?
We have configued All the WEB in Single Managed Server on WEBLOGIC.
Also, My working environment is on a 64 bit Vritual Machine from which I copied the "admaps.jar" file to my non-working MACHINE 1.
Also using the FR Studio on this non-working MACHINE 1
, I am NOT able to connect to the Essbase server of VM environment (only one Essbase instance on 1423), also not able to any connect to any of the Essbase instance on port 1423/1424 of MACHINE 2 as well.
Any other idea to get this resolved.?
Again thanks for your time to this post.
Warm Regards,
Amit Porwal

Firefox prompts me to update. when i do, it will not allow internet connection.

Firefox will prompt me to update. After the installation is complete, I cannot connect to the internet. I've checked the firewall and this is an allowed program. I do not have any proxy settings specified in firefox. I have to restore the earlier version before internet connection is allowed. How do I update firefox without having this problem?

Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
http://kb.mozillazine.org/Browser_will_not_start_up
http://kb.mozillazine.org/Error_loading_websites

Outbound Mail not being accepted: connection refused

For some reason yet to be determined I none of the users in our local network can send mail. Everything was working finne the other day then all of a sudden, one by one, all users lost the ability to send mail externally.
The SMTP error log was reporting a relay access error for users the I enabled the Login Authentication for SMTP and the messages seemded to be going through. But the messages now are not leaving the server apparently. Even though the mail clients send the message successfully, the messages are not making it out of the server.
Here is my postconf -n:
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 20971520
mydestination = $myhostname,localhost.$mydomain,saintmichaelschool.org,mail1.saintmichaelschool .org,192.168.181.2
mydomain_fallback = localhost
myhostname = mail.saintmichaelschool.org
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost = mail1.saintmichaelschool.org
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions =
smtpdenforcetls = no
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/postfix/server.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 450
I'm obviously a novice with mail servers so any hepl is greatly appriciated.
Here is a line from my SMTP log from the sample message I'm trying to send:
Feb 16 11:19:46 mail postfix/smtp[18133]: AEF07178F4F: to=<[email protected]>, relay=none, delay=3897, status=deferred (connect to mail1.saintmichaelschool.org[65.173.83.122]: Connection refused)

I had a dig around google on the postfix 502 error and found one reference which stated that ...
Permanent Errors
These indicate a permanent error and tell the sending system to bounce the message:
502 Command not implemented
http://www.answers.com/topic/simple-mail-transfer-protocol
If this is the case then the 502 error I got when telneting in would we taken as a final failure notice and they would not bother retrying, as I did.
I've no idea why it would be giving this error. Unless someone else can chip in with more info... ?
You can check for the error by connecting from a remote location by telnet...
======================================
In Terminal, type: "telnet mail1.saintmichaelschool.org 25"
there is a space beteen your hostname and last "25". This tells Telnet to connect on SMTP port 25.
You should get a response:
Trying... x.x.x.x....
Connected to.... dah de dah... your.server.name ESMTP Postfix
Type: "MAIL FROM: [email protected]" where [email protected] is any email address
Response: 250 ok
Type: "RCPT TO: [email protected]" where [email protected] is the recipient in your domain
Response: 250 ok
Type: "DATA"
Response: 354 End data with... dah de dah...
Type a message and finish it with a "." (period) on a line by itself.
Response: OK: queued as... dah,de,dah.
Type "QUIT" to exit
===========================
I was getting the 502 error immediately after the Mail From command. If I repeated it, it was accepted OK. However, it looks like a sending server does not try repeating it.
Good luck!
-david

Mac Mail not reading AOL mail

For about a week, my mail account will not accept or read mail from aol.
I believe this is an Apple software issue.
I had to start to use Thunderbird, and I've not had the same issues with that program as with Mac Mail.
I just have to wait for the Apple tech's to read this and come up with a fix.
Mark

As you've already been told on your other thread, the problem was with AOL, not Mail. You were not alone having problems with AOL last week, yet Apple did not release any updates to Mail last week. It's not a Mail issue.

Mail not allowing aol connection?

Similar Messages

Maybe you are looking for