Mail not available plus cannot quit mail to switch off

I clicked on an upgrade available and allowed it to complete.Then when trying to switch off a message that MAIL was not allowing this. Also I cannot access my inbox.  The quit mail are grey instead of the usual black

Choose Force Quit from the Apple menu, select Mail, and press the Force Quit button. If that doesn't work, save and close everything you can and use the Activity Monitor in the /Applications/Utilities/ folder to force quit the loginwindow process.
(114203)

Similar Messages

  • Xgrid is not available, watcher cannot perform Xgrid operations

    Hi
    I have this erro on Xgrid Admin:
    pcastserverd [69982] Xgrid is not available, watcher cannot perform Xgrid operations
    I have a 2 xgrid agents controller, but only one works, they are both xserver.
    The jobs aren't working with the second controller.
    Could you help me please!

    Hi dgremy,
    Have you resolved the issue yet?
    Mind let me know your solution if you did?
    Thanks in advance.

  • My iphone wont let me recieve yahoo mail, tried switching off phone,taking account off and on cant get server button to move says on but is pale so cant move on or off!!!!

    iphone wont let me recieve yahoo mail, tried switching off phone,taking account off and on. did a restore on my phone the yahoo server says on but it is pale so you cant switch off or on.  my phone will recieve bt mail and internet not affected.  Any ideas on how to fix this?

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • HT4623 I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help

    I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help

    Connect the iPhone to the compter you usually sync with
    and use iTunes on that computer to do the restore.

  • TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Try resetting the PRAM and SMC.  Try making the device a favorite .
    Barry

  • The Air Drop Icon is not available.  Cannot send or receive messages from anyone not using Messenger.

    I have checked to see that my iPad is using the latest software available and it is.  I have followed on-line directions to access Air Drop, but I do not have the Icon for it anywhere.
    I am not able to send or receive messages to anyone not using Messenger.  Thee Apple page says I should be able to.
    Any help appreciated.

    Yes, it is 2 questions. 
    My iPad is Model MC763LL/A - I hope that is the answer!  I do have Blue Tooth on.  I am not connected to WiFi, but am on Cellular Data here.  That should not have a bearing on the icon being loaded, should it?

  • Mail rule switches off / stops working repeatedly

    Hi,
    I have a simple rule set to move messages with a certain subject directly to the trash folder. After setting it up, it processes as expected but after a while it un-sets the trash folder back to "Choose folder". So it doesn't send the mails to the trash any more.
    Any ideas how I could solve that?
    Thanks,
    Brian

    Try this:
    http://www.macstories.net/news/configure-an-icloud-email-account-on-snow-leopard /
    I'm kinda in the same boat...my iPhone 4s (that is through my work) and my home iMac, iPad are running the latest OS so not an issue...however my MacBook for work (which also has my iTunes library on it) is still running Snow Leopard.
    The fix about did the trick...and it's still loading them all, but it looks like it's bringing in all my stored emails that i'd been using since I created my .Mac account years and years ago.
    Hope it helps!
    Joshua

  • TS1702 My ipad is showing updates available from App store but when I try to update them it is telling me this is not available on the us store so switch to uk store, I am baffled

    App store on my ipad is showing update,  when I try to update them I get a message saying I need to change to the uk store?  dont know what to do can anyboldy help
    Lynne

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the region where you are located.
    9. Tap "Done".

  • ITunes Will Not Play Entire CDs Unless Error Correction Switched Off!

    I was having problems with iTunes in that it would only play 2 tracks on a CD before iTunes froze and had to be Force Quit.
    On the advice of a poster on this Apple Discussions Forum I went into: iTunes>Preferences>Advanced>Importing and unchecked the "Use error correction" button. Voila, my iTunes will now play complete CDs.
    But surely this is not right? It has been suggested to me that this is a software issue and that I should carry out an archive and install of Leopard.
    What do you think?

    +4. Windows blue screen comes up to check the FAT32 drive to see if there are any errors. There is nothing.+
    what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
    if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
    here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages

  • Can not use the maps Otherwise iPad will switch off itself

    As the question described in the topic, I now want to reinstall this app or delete it from the first page, but I can not a way to do that. Could anybody please tell me how to do it-delete the apps from the first page. When I long tap the apps icon in the first page there is no delete signs appear on the left upper corner but they do from the second page.

    My problem is not about reset. I can not use maps app, everytime when I tap the maps, the machine will switch itself off, which means the white apple appears on the screen. Also, I can not search any location by google map. My hypothesis is to delete the maps app then install it again. However, I can not find a way to delete it, as you mentioned it was firmware I could not delete it at all. But I still wonder if anyone here can give constructive suggestions to fix the maps issue.

  • IPad 2 screen hang up can not open any single application nor can switch off

    iiPad 2 screen hangs

    Try to reset your iPad.
    Press and hold the Sleep/Wake button
    Press and hold on the Home button
    Keep holding both buttons until the display turns off and back on with Apple logo on it.
    If this does not help, try these steps. Note that this may erase the data from your computer.
    You need to restore your iPad to factory settings.
    Take a look this Apple Support article: Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support.
    If this does not help, try the recovery mode. Turn your device off, then plug it to your computer with the home button pressed. You will need to have iTunes installed on this computer. Keep the Home button pressed until you see the iTunes logo on the screen of your iPhone. After that on your computer you should see the iTunes window saying your iPhone needs to be restored to factory settings. Click on the restore button.

  • Hi I can't update my apps when I try to update it asks for password when used it goes back to update. I think I'm not alone and have tried changing date switching off signing out and in and rebooting. Is there a solution or do I need to take it in?

    I can't update my apps each time it asks for password when entered it goes straight back to update. I don't think I am alone in this. I have tried changing the date, rebooting, switching off and on signing out and nothing works. Does anyone know of a solution or will I have to take it to an apple shop. My misses has no trouble with her updates, they are both on iOS 6. Hope someone can help.

    Tried that just said cant connect to iTunes Store which was different.

  • Once i am out of wifi network my airtwl 3G netwok does not come back automatically i have to switch off the phone and switch on. any solution

    hi when ever i am out of my wifi network i dont get back my 3 G connection . I have to switch off the mobile and switch on to get back my 3G network of my service provider

    In settings>general> cellular do you have it  turned ON?

  • Filters not available for a file coming from Lightroom

    Hi everyone,
    And sorry for my poor english
    I started to work with Lightroom and Photoshop CS5.5 some weeks ago to improve my pictures and my photographic workflow. Here is my problem :
    - I import a RAW picture in Lightroom with DNG conversion, everything is fine in Lightroom.
    - I want to edit the picture in Photoshop so I click "Edit in... Photoshop CS5", so that I'm editing a copy in PSD format. Camera RAW works fine.
    - Once I'm in Photoshop with my .psd file, some filters (some default filters of Photoshop and also some external plug-ins) are not available (I cannot click on it in the filters menu) while others work like a charm.
    Is it normal?
    If it is, why?
    If it is not, what should I do to get rid of the problem?
    Thanks for your attention
    <LeToC>

    I spent hours to find the answer to this question... and you just made my day!
    I tried with a jpeg file as I have not my RAW files with me right now and it seems you're right. I'll try with my RAW files as soon as possible just to check and let you know.
    Do you know if these upgrades are planned? 16 bits is quite a good improvement and I like to play with some of the stupid toys like "pixelate" or "texturize"
    Anyway, thanks a lot for this !
    <LeToC>

  • My xp desktop thinks i/tunes is on a network resource that is not available, stops it being removed or upgraded,help

    unable to remove or download i/tunes from XP desktop, the feture you are trying to remove is on a network resource that is not available plus my computer thinks the i/phone is a scanner or camera. can anyone tell me how to delete i/tunes so i can re-install ?

    This problem can usually be fixed with the Microsft Installer cleanup utility.
    Unfortunately the Microsoft Installer Cleanup utility has been withdrawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
    Google  msicuu2.exe download
    mydigitallife or MajorGeeks in the above search have a copy of version 3
    Check for malware before installing it.
    Download a fresh copy of iTunes
    http://www.apple.com/itunes/download/
    Save the file on your PC.
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista/Windows 7
    http://support.apple.com/kb/HT1923
    *If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    If you get  permission denied error, Try Run as Administrator – an option if you right click on the program.
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    If you don’t see an entry for one of the programs that did *not* uninstall, look out for entries that start All Users that are blank entries or have numeric entries that look like version numbers
    restart your PC and try installing iTunes

Maybe you are looking for

  • Scroller wont scroll

    This might call for me to post the code, if so let me know and I will,I have an applet that I am trying to use a scroll panel and move the scroll bar when information is added to a JEditorPane contained in the scrollpane, the text shows but the scrol

  • JDK Performance tests...interesting results...

    In an effort to try and eek out as much performance from a Java application as possible, I decided to conduct a little experiment on various JDKs on Sun Solaris 8. What I found was very interesting, and I thought I would share this with the group. I

  • IPOD's not UPDATING, ITUNES doesn't recognize internet logon

    I cannot update my ipod nano 1st gen. 'cause itunes doesn't recognize internet and the ipod updater. Have to say that Itunes store is available and i don't have any antivirus software installed on my mac. anybody will help me?please... i've got the 1

  • SAP CRM Visit Plan activity

    Hi Experts, My Business requirement is to create a Visit Plan and assigned it respective Employee Responsible with Activity Type "Task". With this I am creating a Task for that employee so that once user Log-on (Employee Resp.) can see their task on

  • Install Wls6.0 on Solaris 8.0 for x86

    I have a pc with Solaris 8.0 for x86 installed .I also install jre1.3 on it. When I try to install wls6.0 on it ,there comes an error message"can't find libjava.so ". I've found the file libjava.so at path "j2re1_3_0/lib/i386/" . Why the installer di