Mail not being able to find the SMTP server

hi there,
I am trying to use a new mailbox account but Mail cannot find the SMTP server and refuses to send emails. It is a pop account and it can find the incoming server ok. I know that the server is ok because I can send emails from a webmail version of the account but in Mail..nada.
Does anyone know why Mail is not finding the server?
Many thanks
Shark

What version of OSX were you using before upgrading to Snow Leopard? Since introduction of Leopard and Mail 3.x, the Outbox has only been seen in the Sidebar when there is one or more messages not yet sent.
Sending with webmail is no test of the SMTP, since it is not used when sending via webmail. What Port are you presenting the SMTP on, and what does the provider recommend in that regard? Who is that provider?
Ernie

Similar Messages

Unable to Uninstall Itunes due to not being able to find the folder

I can't uninstall my Itunes from my laptop to install the new one and it is saying that they can't find the folder,is there anyway i can fix this?

Start with the second box and the notes below it. If you cannot uninstall iTunes using the Programs and Features control panel, try the MS Installer Fixit, or simply tear down the installation folders as given.
The section Install missing components should show how to break down the main iTunes installer into the component .msi files.
tt2

I game on steam, and recently I went to go play garry's mod, (note i just upgraded to os x mavericks) and it said something about not being able to find the files, or not being able to start garry's mod.

So, I really play gmod alot, so im really frustrated about this. Does anyone have a patch or something for this?

Contact gmod's developer.

Why wont my mail open? The mail not being able to open is making me not be able to shut down my laptop.

Why wont my mail open? The mail not being able to open is making me not able to shut down my macbook.

Press power button down and hold up to 30 secs to force shut down and then start up and see how u goes on ur mail....

Lion Server postfix mail not being delivered to mailboxes. "SMTP restriction `reject_invalid_helo_hostname' after `permit' is ignored" and "connect to private/policy: Connection refused" errors.

All, Im stumped. In fact I have been on the phone with Apple Support and this has been escalated to the top engineers, as I think its got them too..
Anyway, here is my problem..
I'm running an Mac Mini with OS X 10.7.4 Server. I have had mail running on it for 2 months or so, without any issues. The mail was actually migrated from 10.6 in March, and It actually went smoothly. I have 3 domains which all recieve mail and they all work (or did up until 2 weeks ago)..
So the story is this.. I can send mail from my domains, without issue. imap and dovecot must be working.. cause all the stored mail, can be read with the mail IMAP client.. I can even transfer mail messages from one mailbox to another with Mail client. Sending mail is a breeze, it still works and the recipients still recieve their mail. But I noticed I wasnt getting any mail at all from those mailboxes... no mail, no spam, nothing.. which is unusal. I fired up Server admin and checked out the SMTP log, and this is what it showed for every email recieved: (xxxxxx is just me hiding sensitive info)
Jul 21 14:25:20 xxxxxxxx postfix/postscreen[65857]: CONNECT from [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/postscreen[65857]: PASS OLD [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: connect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: warning: restriction `reject_invalid_helo_hostname' after `permit' is ignored
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: NOQUEUE: reject: RCPT from nk11p03mm-asmtp994.mac.com[17.158.233.225]: 451 4.3.5 Server configuration problem; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<nk11p99mm-asmtpout004.mac.com>
Jul 21 14:25:28 azathoth postfix/smtpd[65858]: disconnect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Ok, now what is odd, is these rejected messages are not even appearing in the mail queue in Server Admin. I have no idea why there are not being delivered
Ive checked my postfix main.cf file and master.cf files they both look ok.. Ive even replaced them with the main.cf.defualt.10.7 and master.cf.default.10.7 files and to no avail... same problem..
So in summary
I can send mail out
IMAP is working on the client end (thus dovecot is) exsisting stored emails can be accessed, read, moved unread etc..
mail is coming into the sever, but its being rejected. there is NO rejection email sent back to the sender.
mail is recieved by postfix, but cyrus isnt doing anything with it.. I have no idea where it goes...
Could anyone shed light on this...
my main.cf file:
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
azathoth:postfix root#
azathoth:postfix root# less main.cf
azathoth:postfix root# more main.cf
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#       mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in
#   the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see local(8)).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
unknown_local_recipient_reject_code = 550
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
# See the discussion in the ADDRESS_REWRITING_README document.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

My iPad has been erased. I am not be able to find the prevues owner to use the iCloud account to activate my iPad. If there is a way please help me.

My iPad has been erased. I am not be able to find the prevues owner to use the iCloud account to activate my iPad. If there is a way please help me.

No, there isn't. If possible return it to whomever you purchased it from and get your money back. Otherwise, you have a very expensive paperweight that is of no use to you.

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Nope. It just opened the installer and stayed in the same loop.
It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
Eveything was working fine until the mountain lion failed install.

Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do

Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do not change. Am I doing something wrong?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Not being able to remove the voice mailbox number ...

Hello
I would like to ask you guys here at Nokia why you can't remove the voice mail box phone number after setting it the first time. Why is it so?
To reproduce this "bug" go Menu -> Messaging -> Voice call messages -> Voice mailbox no.
Set the voice mailbox number.
Then, try to restore the settings to what it was originally.
It won't work.
I have tried this on several newer Nokia phones.
Why is it so? Could "OK" maybe move to the left soft key? No. Of course not.
Did you know everyone doesn't have voicemail?
Therefore some users use the 1 key as any other quick dial key.
I suppose that in any good user interface you should be able to restore a setting to it's original setting. Not being able to do so without any warning of some kind is simply ridiculous.
If there is some other limitation that prevents you from doing this, please let me know.

Why is nobody answering this?
I would be very happy to discuss this.

How to find the smtp server on a linux box?

Hello,
I am trying to set up Notification Methods in OEM and I need to know the SMTP server and port. Which command can I use on Linux to find this information? Thank you in advance.

Netstat is not necessarily the right tool for this task.
Sorry, but "netstat -a | grep 25" will not be useful. For example:
netstat -a | grep 25
unix 2      [ ]         DGRAM                    128925
unix 3      [ ]         STREAM     CONNECTED     11825 Better grep for "smtp". For example:
netstat -a | grep smtp
tcp        0      0 vm015.example.com:smtp      *:*                         LISTEN
lsof is a better tool, but requires "root" or superuser privileges. For instance:
lsof -i :smtp
COMMAND   PID USER   FD   TYPE DEVICE SIZE NODE NAME
sendmail 3098 root    4u IPv4 13077       TCP vm015.example.com:smtp (LISTEN)Keep in mind however that processing and routing email in is usually a more complex task and involves either to know firewall and mail gateway configurations, or ask your mail administrator. The local mail server may not be permitted to relay email to the company wide smtp gateway depending on routing policies.

Mathscript node errors due to not being able to find .m files

I recently installed LV 8.5.1 and tried to open a VI with a mathscript node (originally created with LV 8.2). It got a broken arrow due to an unrecognized symbol in the node which was the name of a matscript function in a .m file of the same name. And this worked fine with 8.2. I updated the mathscript: search paths 'Working Directory' both in the mathscript window and the main app Tools->Options list. I exited and re-started, but to no avail. And I made sure to add it as a 'recursive' search folder, even though my file is right at the top.
What am I doing wrong?

Hello Umars,
In LabVIEW 8.5 you won't be able to use user defined functions if you are you using a Base Package. Regardless of which package you are using you may find the LabVIEW help file informative.
Calling User-Defined Functions from LabVIEW MathScript (Windows, Not in Base Package)
http://zone.ni.com/reference/en-XX/help/371361D-01/lvconcepts/calling_udf/
David A
National Instruments
FlexRIO Product Support Engineer

Mifi 4510 and not being able to use the internet with my Ipod touch

My mifi 4510 will not allow my iPod Touch to connect to the internet. In settings it sees my device and for about 2 seconds a dot will appear of the screen of the mifi4510. The dot goes away and it keeps searching endlessly to connect to my iPod Touch. I have talked to the first level of tech support and they tell me that the iPhone and iPad are compatible with the 4510, but not the iTouch. I can take my iTouch to any other wireless network, enter the key and the network will connect flawlessly to my device. First level of tech support also asked if I had the latest updates to my iPod Touch The answer is yes. If in fact Verizon is blocking the iPod Touch from going out onto the internet, can anyone give me the rationale as to why this would be true.
AJO65

Hello,
I am not aware of any limitations on the MiFi that would back up Verizon's story. If the device is Wi-Fi compatible then it should be able to connect to the MiFi 4510L. The only reason why a device might not be able to connect would be due to wireless passwords not matching or the MiFi broadcasting in a mode which is incompatible with that device.
Here are some quick suggestions which may help:
Change the 802.11/Wireless Mode
1. Navigate to http://mifi.admin
2. Enter "admin" in the textbox in the upper right hand corner
3. Click the Wi-Fi tab
4. Change the 802.11 mode from B+G+N to B+G
5. Click Apply
6. Test your connection
Remove the Wireless password
1. Navigate to http://mifi.admin
2. Enter "admin" in the textbox in the upper right hand corner
3. Click the WiFi tab
4. Change your Selected Profile to Open Access
5. Click Apply
6. Test your connection

How do I find the SMTP server number in my MB Pro mail program?

For some unknown reason my mail program is just now asking for a password when I attempt to send an email. I verified the password with my ISP. When I go to the Mail program/Preferences/Accounts I see a screen that has three sections. The third section offers "Outgoing mail server (SMTP)" but offers no box allowing a server number such as 587... Why is that option missing? What is likely causing this sudden request for a password?
Thanks,
Jim

I did that and and chose "Use custom port" and entered 587. Still is asking for a PW but when entered it tells me that the server will not accept the password thus will not sent the email. I can send and receive using my PC.
I also can receive emails on the Mac.. So, something else is "set" incorrectly.. ????

Mail not being able to read inbox/sent mail??

Hey guys,
I have a system that is running OS X 10.3.9 with Mail: 1.3.11 and it seems to constantly have issues reading the inbox and sent mail folders.
When I launch mail, it shows that I have messages in my inbox and my sent mail but when I go to click on the headers, nothing shows up in the preview screen. Rebuilding my mailboxes and also trying to re-import them into a different box does not help. When I try importing them, the file is not recognizable by the mail importer.
When I restore these mailboxes from back up, mail is able to read them for a few minutes, then it goes right back to the same issue.
Has anyone encountered this and know how to address it or can even tell me what it is?

Hello,
I've same problem on Mac OS 10.2 system. Only in sent mail box.
Sent mail box appear empty but state bar says 782 messages.
Clicking on a ghost message show selection bar. Double click on subject and subject of message appears, same operation on date, sender...
Inbox, junk mail work fine.
Other problem : Mail always crash down when I quit application (Application does not respond).
Sure I've repaired files permission, delete preference file, rebuild mail boxes but problem still here.
Someone can help me ?
Message was edited by: Sebastien Rousseau

Can not sync files due to itunes not being able to find orginal file

I have purchased these songs and video from apple on previous computer and have not had trouble until recently I believe it occured when i went to ver. 9. I have a touch and nano and these files that are on touch will not go to nano. I am afraid i will lose these if something happens to touch. It says it wil not sync with the touch also on 100 songs.

Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

Mail not being able to find the SMTP server

Similar Messages

Maybe you are looking for