Mail not being pushed after upgrading to iPhone 4S

Ever since upgrading from iPhone 4 to iPhone 4S last week, my iCloud email doesn't get pushed to my iPhone anymore. I have to manually go into mail and wait for mail to check.
No settings were changed and I setup the phone from a backup of my iPhone 4 that had no problems with push email.
Both phones running iOS 5.01
Thanks for your help

Try the following:
Go to Settings > iCloud and turn mail OFF
Do a hard reset of the phone (hold the home and power buttons at the same time for about 6-8 seconds until the phone restarts - release the buttons when the Apple logo appears)
Go to Settings > iCloud and turn mail ON

Similar Messages

  • Rules in Mail not being applied after Mavericks update

    Hi everyone, I know there are a lot of threads already discussing similar issues, but so far I've been unable to find one that helps resolve my particular issue. Ever since upgrading to Mavericks my rules are not being applied in Mail. I will give you a screenshot of one of my rules:
    I have about five rules that follow the same pattern: search for particular string in the FROM field and mark it with a color if the string is present. These rules all worked fine in Snow Leopard. All of my rules are still present after the upgrade and all checked as active. When I "select all" messages in my inbox and press Option-Cmd-L the rules are applied properly. However, the rules are not applying themselves when new mail comes in. As far as I can tell this does not have anything to do with the mail not being recognizes “as a new message” like, for example, because the mail was already read on my phone. It happens even if my other devices are offline and the only thing I am using to check mail is my laptop.
    I am using a MacBook Pro 2.3 GHz Intel Core Duo with OS X 10.9.1, in case that matters.
    Thanks for any advice!

    I think I've found at least a partial solution to the Mail - Rules Don't Work problem:
    In "Mail" go to the menu Mailbox and click on Rebuild.
    If you have a lot of stuff, this will take several minutes to finish.
    I also reviewed all my rules and made a few minor changes.
    Mixed results:  I found that running "Apply Rules" didn't work on email already received; but new mail did.  I don't quite understand that, but I call it a partial success.

  • E-mail not being pushed

    I see this topic has been addressed with other phones, but since converting to the cloud my e-mail is either not being pushed or is severly delayed. I am using mobile me, with iphone 4 and i cloud. Was having no issues prior to using "the cloud". Any ideas ? thanks in advance

    Push mail does'nt work since 2012/05/24 7.00 PM HAEC in France for me. I've 3 accounts and I'm an original MobileMe user.
    I tried all the solutions on this bord. Nothing happen.
    I called Apple support, for us iCloud is functional.
    Push mail on iCloud is only functional if you're a new member not an older MobileMe.
    You can test this by creating a new iCloud account, push mail is functional.
    The problem comes from Apple.
    Apple must solve this problem quickly.

  • Mail not being pushed to iphone until I click on mail

    it's only recently started doing this, but emails aren't automatically being pushed to my iPhone unless I click on the mail icon.
    I've checked to see that emails are to be pushed in the settings.
    and I don't know if this is related, but I'm also receiving the error message "message could not be sent to the trash" much more frequently...those two issues seem to coincide
    any ideas, O experts?
    Patrick

    Is the account an Exchange account, a MobileMe account, or a Yahoo account that was created on the iPhone with the Yahoo account preset? If not, the account does not support Push access for received messages. Fetch only - automatically or manually.
    If an account that supports Push access for received messages, who is the email account provider for the account? More than likely the problem lies there.
    If the account does not support Push access for received messages - Fetch only, automatically or manually, try deleting and recreating the account on your iPhone.

  • Email not being pushed after 5.1 iOS

    I noticed today for whatever reason, my emails are not automatically being pushed to my phone, unless I stay on the mail app. Iphone 4 with iOs 5.1 Exchange Email, Hotmail, and iCloud all exhibit the same behavoir. If mail is mimized it won't send, but if I go in and kill the mail app, then it pops up with notifications and emails just fine.

    Been battling this since the update myself - finally found the problem. It's not a bug.
    Settings -> Mail, Contacts, Calendars -> Fetch New Data -> Advanced -> iCloud -> Change to "Push".
    I have always received my emails automatically from iCloud, or they were always "Pushed" to me. For some reason, after updating to iOS 5.1, this setting was changed. It took me a while, but I finally found the problem. All emails are coming automatically now.
    Hope this helps!

  • Some client data not being populated after upgrading to NCS 1.1.0.58

    After upgrading to Cisco Prime NCS 1.1.0.58 some of the client data is not being populated or gathered. The graphs labeled "Client Count By Association/Authentication" and "Client Count By Wireless/Wired" are no longer being updated? Not sure what was changed during the upgrade or where to look to get it to start collecting the data again?                  

    Eajackson,
    Make sure your WLC, MSE and WCS/NCS code matches the compatibility matrix here:
    http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
    Sent from Cisco Technical Support iPhone App

  • ICloud mail not being pushed to iOS devices

    Hello there,
    I've been having an issue with receiving new iCloud mail messages on my iPhone and iPad. They are not being automatically pushed to my iOS devices. They arrive normally to my MacBook and iCloud.com.
    I've tried the steps on the offical support page and it recommends deleting the iCloud account and then readding it.
    My question is:
    If I do this, will all my photos automatically redownload to the 'My Photo Stream' album in Photos?
    Thanks.

    No, only photos from the last 30 days will be redownloaded; older photos are no longer in iCloud and will be lost.  If you want to save your photo stream photos save them to your camera roll first (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, then tap Save to Camera Roll).

  • Mail not working properly after upgrade to  Leopard

    Hopefully this will be a common issue easily solved!
    After updating from 10.3.9 to Leopard 10.5.6 Mail has become unresponsive after opening - the programme opens but the message window does not appear, the address viewer and connection activity monitor will appear, it does not receive mail either
    If anyone has any ideas would be much appreciated!
    TIA

    The problem you are having following the upgrade to Leopard (10.5.6) from 10.3.9 is similar to those of people who have upgraded from Tiger, and has been covered by the support document at the link below:
    http://support.apple.com/kb/TS2537
    Your issue will be due to files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those. You will not have the files named to include MessageRules because you have not used Tiger.
    To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
    Ernie

  • Routes not being followed after upgrade from ES to ES2

    We are upgrading from ES to ES2 and now our routes are not working.
    We have 2 routes leaving an AssignTask operation, Deny and Approve.  The users get assinged their form, they make any required changes, and then click one of these buttons to complete the process.  In ES this works fine.  In ES2 they can see the buttons, but when they click them the route is not being followed and the process remains stuck at the AssignTask operation.
    If they close the form they can use the approve or deny icons on the task summary panel but they loose any changes they have made.
    Any help would be greatly appreciated.

    Behavior change...?
    SELECT  xmlelement("TestMsg",
                        xmlelement("MESSAGE",
                        XMLFOREST(m.tx_id   "MsgNum",
                                  m.tx_type "MsgTyp"
                        )) ut_xml
    FROM (select 1 tx_id, 'test' tx_type from dual) m
    will give output in 10.2.0.4.0 EE
    UT_XML
    <TestMsg>
       <MESSAGE>
          <MsgNum>1</MsgNum>
          <MsgTyp>test</MsgTyp>
       </MESSAGE>
    </TestMsg>Edited by: Marco Gralike on Mar 29, 2011 1:07 PM

  • Mail not being pushed to iphone

    I just bought an iPhone 4s yesterday and have not been able to automatically receive my emails yet. I have to manually open the mail icon for the mailboxes to refresh each time. I deleted my email accounts and replaced them on my phone, but the problem still exists. This is quite frustrating as I am not going to manually check for emails all the time!

    what account are you using.
    have you set it to push in notification?

  • Yahoo mail not being pushed to iphone.

    I have the first gen phone with 2.0 update. Since then i do not get my yahoo email pushed to my phone. It says connecting at the bottom and has been for a few days and thats all. Anyone else having this problem and any ideas how to fix it?

    Skydive: You are not alone. There are a bunch of threads out there on how to fix & improve the USB sync. I finally gave up, and am darned close to opting out for the Samsung BlackJack II my IT department wants me to have.
    Many of the threads (here is one: http://discussions.apple.com/message.jspa?messageID=7769870#7769870) talk about removing all Apps, doing a full Restore, and then slowly building the phone back up as a solution. It seems that if you interrupt a sync, your backup files can get corrupted and make things a mess. People appear to have take 3hr syncs and reduced them to 10mins by following this process.
    For me, even a 10min sync is unacceptable. My crappy old BB 7100g could sync my 6,000 contacts and 5 years of calendar in about 120 seconds.

  • TS4083 Mail not being pushed to all devices

    iCloud mail was syncing nicely to my three devices (iMac and MacBook Air running Mt. Lion and iPhone running iOS7) but since Mavericks was released, mail is no longer pushed to the MacBook Air. All Apps and OSs are up to date. Resetting iCloud on the Air didn't help. Any suggestions?

    No, only photos from the last 30 days will be redownloaded; older photos are no longer in iCloud and will be lost.  If you want to save your photo stream photos save them to your camera roll first (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, then tap Save to Camera Roll).

  • Mail not importing messages after upgrade to tiger

    I've just upgraded to Tiger. Everything is working well, except mail. The initial process of importing messages goes on forever! I left it running overnight, and it still was not done. I have tried cancelling and restarting. I have also restarted the machine several times. It looks like the process is just stalling. i do have over 2000 messages in my mailbox, but even so, 8+ hours seems excesive.
    Does anyone have any suggestions?
    Thanks
    Powerbook G4 15"   Mac OS X (10.4.7)  

    Mail troubleshooting - Yosemite
    Troubleshooting Apple Mail
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • Battery not being detected after upgrade from XP to Win7.

    Actually not strictly an upgrade but a fresh install of 7 over XP. Any idea why? Thanks for advice. This is a Lenovo 3000 N100 Core Duo. (Only N200 is listed on this site, and it does not have any driver for the battery).

    Hi Seymoria,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with battery not detected in your Lenovo N100 laptop.
    Please boot the system to the safe mode and check for the issue.
    Also try to uninstall the Microsoft ACPI and restart the system and check for the issue.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Tag not being created after upgrade from 9i to 10g

    We're upgrading from 9i to 10g - about time - and we've hit some "unexpected behaviour".
    If I run
        SELECT  xmlelement("TestMsg",
                        XMLFOREST(m.tx_id   "MsgNum",
                                  m.tx_type "MsgTyp"
                                  ) MESSAGE -- this is the alias for the XMLFOREST item
                        ) ut_xml
        FROM (select 1 tx_id, 'test' tx_type from dual) mon my 9.2.0.4 database I get
    <TestMsg>
      <MESSAGE>
        <MsgNum>1</MsgNum>
        <MsgTyp>test</MsgTyp>
      </MESSAGE>
    </TestMsg>- an extra tag is created based on the alias of the XMLFOREST item.
    on my 10.2.0.4 database I get
    <TestMsg>
      <MsgNum>1</MsgNum>
      <MsgTyp>test</MsgTyp>
    </TestMsg>no MESSAGE tag.
    Some of the XML parsing we have is taking account of this MESSAGE tag and hence is now breaking.
    I guess my question is whether we've messed up the install of XMLDB or whether the 9i behaviour was incorrect and we should amend the parsing to the 10g behaviour.

    Behavior change...?
    SELECT  xmlelement("TestMsg",
                        xmlelement("MESSAGE",
                        XMLFOREST(m.tx_id   "MsgNum",
                                  m.tx_type "MsgTyp"
                        )) ut_xml
    FROM (select 1 tx_id, 'test' tx_type from dual) m
    will give output in 10.2.0.4.0 EE
    UT_XML
    <TestMsg>
       <MESSAGE>
          <MsgNum>1</MsgNum>
          <MsgTyp>test</MsgTyp>
       </MESSAGE>
    </TestMsg>Edited by: Marco Gralike on Mar 29, 2011 1:07 PM

Maybe you are looking for

  • HypRetrieve returns -3  Excel VBA

    I've written some VBA code to run a macro inside my Excel 2007 worksheet. I'm using Hyperion Smart View version 9.3.1.2.029. Here's the code I created to refresh my worksheet: Sub refreshData() 'FileSystem.FileCopy "C:\ExpenseFcstDownload\Expense_For

  • Opening JPEG files from Camera RAW

    Hi - I just installed ACR V4.1 on my PC. I have PS CS3 installed...My understanding is that from Bridge I could click on a JPG file and it would open ACR 4.1 directly.At the moment i click on the file and PS CS3 open and then it loads ACR. Is this th

  • Can Elements 9 Organizer send to Premiere Elements 7?

    When right-clicking an item in the Elements 9 Organizer the context sensitive menu includes "Edit with Photoshop Elements..." & "Edit with Premiere Elements...". These "Edit with" dialogs look only for  PSE9 and PRE9. Is there a way to make the PRE l

  • Ipod does not show my songs, neither does Itunes but says there is 10gigs

    My ipod or my itunes does not show my songs, but they both say i have 10 gigs on the ipod.. any ideas what is going wrong and how i can fix it?

  • Requirements in sales order stock instead of project stock

    Dear all, we are attaching components to our network activities. Do you know if it is possible to generate sales order stock requirements out of the project instead of project stock (special stock indicator should be E instead of Q)? Thanks for your