Mail not being pushed to iphone

I just bought an iPhone 4s yesterday and have not been able to automatically receive my emails yet. I have to manually open the mail icon for the mailboxes to refresh each time. I deleted my email accounts and replaced them on my phone, but the problem still exists. This is quite frustrating as I am not going to manually check for emails all the time!

what account are you using.
have you set it to push in notification?

Similar Messages

  • Mail not being pushed to iphone until I click on mail

    it's only recently started doing this, but emails aren't automatically being pushed to my iPhone unless I click on the mail icon.
    I've checked to see that emails are to be pushed in the settings.
    and I don't know if this is related, but I'm also receiving the error message "message could not be sent to the trash" much more frequently...those two issues seem to coincide
    any ideas, O experts?
    Patrick

    Is the account an Exchange account, a MobileMe account, or a Yahoo account that was created on the iPhone with the Yahoo account preset? If not, the account does not support Push access for received messages. Fetch only - automatically or manually.
    If an account that supports Push access for received messages, who is the email account provider for the account? More than likely the problem lies there.
    If the account does not support Push access for received messages - Fetch only, automatically or manually, try deleting and recreating the account on your iPhone.

  • Yahoo mail not being pushed to iphone.

    I have the first gen phone with 2.0 update. Since then i do not get my yahoo email pushed to my phone. It says connecting at the bottom and has been for a few days and thats all. Anyone else having this problem and any ideas how to fix it?

    Skydive: You are not alone. There are a bunch of threads out there on how to fix & improve the USB sync. I finally gave up, and am darned close to opting out for the Samsung BlackJack II my IT department wants me to have.
    Many of the threads (here is one: http://discussions.apple.com/message.jspa?messageID=7769870#7769870) talk about removing all Apps, doing a full Restore, and then slowly building the phone back up as a solution. It seems that if you interrupt a sync, your backup files can get corrupted and make things a mess. People appear to have take 3hr syncs and reduced them to 10mins by following this process.
    For me, even a 10min sync is unacceptable. My crappy old BB 7100g could sync my 6,000 contacts and 5 years of calendar in about 120 seconds.

  • E-mail not being pushed

    I see this topic has been addressed with other phones, but since converting to the cloud my e-mail is either not being pushed or is severly delayed. I am using mobile me, with iphone 4 and i cloud. Was having no issues prior to using "the cloud". Any ideas ? thanks in advance

    Push mail does'nt work since 2012/05/24 7.00 PM HAEC in France for me. I've 3 accounts and I'm an original MobileMe user.
    I tried all the solutions on this bord. Nothing happen.
    I called Apple support, for us iCloud is functional.
    Push mail on iCloud is only functional if you're a new member not an older MobileMe.
    You can test this by creating a new iCloud account, push mail is functional.
    The problem comes from Apple.
    Apple must solve this problem quickly.

  • ICloud mail not being pushed to iOS devices

    Hello there,
    I've been having an issue with receiving new iCloud mail messages on my iPhone and iPad. They are not being automatically pushed to my iOS devices. They arrive normally to my MacBook and iCloud.com.
    I've tried the steps on the offical support page and it recommends deleting the iCloud account and then readding it.
    My question is:
    If I do this, will all my photos automatically redownload to the 'My Photo Stream' album in Photos?
    Thanks.

    No, only photos from the last 30 days will be redownloaded; older photos are no longer in iCloud and will be lost.  If you want to save your photo stream photos save them to your camera roll first (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, then tap Save to Camera Roll).

  • SOME Contacts Not Being Pushed From iPhone to MobileMe

    Some of my contacts aren't being pushed from my iPhone to MobileMe. Some aren;t being pushed from MobileMe to my iPhone. I have 51 contacts on my iPhone and 35 on my MobileMe. If i create a new contact on MobileMe it might be pushed or might not. Same goes with iPhone.
    Anyone got any ideas or having the same problem? Im just using the internet based contacts because I'm on Vista

    One thing to try.
    Export the photo, from iphoto, that will not sync to the iphone.
    Make sure the file name has an extension. (something like .jpg or .bmp)
    Import the photo back into iphoto.
    Now try syncing the photo to the iphone.
    Hope this helps.

  • Emails not being pushed to iPhone

    My dad's emails are not getting pushed to his iPhone. This is what his settings look like under push:
    I have the same iPhone with the same iOS version and my emails are pushed to my phone. This is what my settings look like:
    How do I get his settings to look like mine so his emails can get pushed to his phone?

    Is the account set up as POP or IMAP on your dad's phone?
    ~Lyssa

  • Mail not being pushed after upgrading to iPhone 4S

    Ever since upgrading from iPhone 4 to iPhone 4S last week, my iCloud email doesn't get pushed to my iPhone anymore. I have to manually go into mail and wait for mail to check.
    No settings were changed and I setup the phone from a backup of my iPhone 4 that had no problems with push email.
    Both phones running iOS 5.01
    Thanks for your help

    Try the following:
    Go to Settings > iCloud and turn mail OFF
    Do a hard reset of the phone (hold the home and power buttons at the same time for about 6-8 seconds until the phone restarts - release the buttons when the Apple logo appears)
    Go to Settings > iCloud and turn mail ON

  • TS4083 Mail not being pushed to all devices

    iCloud mail was syncing nicely to my three devices (iMac and MacBook Air running Mt. Lion and iPhone running iOS7) but since Mavericks was released, mail is no longer pushed to the MacBook Air. All Apps and OSs are up to date. Resetting iCloud on the Air didn't help. Any suggestions?

    No, only photos from the last 30 days will be redownloaded; older photos are no longer in iCloud and will be lost.  If you want to save your photo stream photos save them to your camera roll first (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, then tap Save to Camera Roll).

  • Yahoo e-mails are not being received on iphone 4.

    Yahoo e-mails are not being received on iphone 4.  I had to go website to retrieve about 50 emails from last couple of days.  Everything looks correct in settings and I haven't changed anything that I know of.  Please help if you've encountered this issue.

    I tried the suggestion of deleting the account and starting over from scratch (twice), to no avail.

  • Emails not being pushed to Mac Book Pro

    Emails are not being pushed to my Macbook Pro despite coming to my other i devices.  If I close and reopen mail it seems to encourage some but not all to arrive.  Any suggestions for a fix please?
    Thanks
    Duncan

    Hi duncal,
    If you are having issues receiving emails in Mail on your MacBook Pro, you may find the troubleshooting steps outlined in the following article helpful:
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    Regards,
    - Brenden

  • Why wont my mail open? The mail not being able to open is making me not be able to shut down my laptop.

    Why wont my mail open? The mail not being able to open is making me not able to shut down my macbook.

    Press power button down and hold up to 30 secs to force shut down and then start up and see how u goes on ur mail....

  • E mail not being received

    Hi, I use BT yahoo mail through outlook 2010, sent mails show as sent in outbox, i get no error message but they are not going to recipients. I have deleted account and re set up in outlook i am using the IMAP settings as on the BT web site. When i send mail from my apple devices using same e mail account they are recieved ok? Any ideas ? Thanks in advance.I should add when i set up account in outlook and hit test message that gets received ok . In additon I can send myself emails using outlook.

    I suspect that you may have the same issue as
    https://community.bt.com/t5/Email/One-particular-recipient-not-receiving-my-Outlook-mail-but-can/td-...
    https://community.bt.com/t5/Email/e-mail-not-being-received/td-p/1343373
    https://community.bt.com/t5/Email/Cannot-send-emails/td-p/1343253   
    One solution may be to temporarily change your SMTP server to 
    smtp.mail.yahoo.co.uk

  • Where clause one query not being pushed down

    I am having a problem where I cannot get a certain "optional" parameter to be pushed down to a query. The parameter gets applied in memory after the result set is returned but not pushed down to the DB. The function is as follows:
    declare function getFoo($key as xs:string, $optinalInput as xs:string*) as element(b:bar)*
    for $foo in f:getFoo()
    where $key = $foo/key
    where not(exists($optinalInput)) or $foo/optional = $optinalInput<- does not get pushed down to the query
    return $foo
    If I make optinalInput an xs:string instead of xs:string * and the optional parameter will get pushed to the query. The problem is for this optional parameter I could get anywhere from 0-50 in the sequence. Seems like when the parameter is a sequence it doesn't get applied to the query. Is there any way around this?

    Mike,
    I understand the difference between * and ? and I was one of the people working on the "string-length not getting pushed" problem so I am very familiar with it. I tried you solution that you mentioned below and it still did not push the where clause to the query. I know I could achieve this with an ad-hoc query but I wanted to do a pure xquery implementation of this component because of the benefits it could have when interacting with other components in our ODSI project...such as SQL joining and potentially pushing additional where clause down from components that call this component. The only way I did get this to kind of work is to do this:
    return
    for $o in $optinalInput
    for $foo in f:getFoo()
    where $key = $foo/key
    where $o = $foo/optional
    return
    $foo
    for $count in 1
    where not(exists($optinalInput))
    for $foo in f:getFoo()
    where $key = $foo/key
    return
    $foo
    By putting the optional parameter into a FOR statement above the table call it guarantees that at least one will exists and that's why the optional parameter gets pushed properly to the DB with a parameterized query. The problem with this is that even though a parameterized query gets pushed it will call the SQL statement multiple times!...not good.
    Another solution that was suggested to me would be to create the number of sequences for each item in the sequence and treat each item as it's own. For example if you know that the schema limits the sequence from 0..50 then you could make 50 items and 50 where clauses....probably not an optimal solution either but it would achieve properly pushing the where clause tot he DB.
    For now I am satisfied with this optional parameter not being pushed to the DB because the performance was still good but it would be nice if there was a maintainable pure xquery solution to this problem.
    Thanks for the help it's always appreciated!
    Mike

  • Rules in Mail not being applied after Mavericks update

    Hi everyone, I know there are a lot of threads already discussing similar issues, but so far I've been unable to find one that helps resolve my particular issue. Ever since upgrading to Mavericks my rules are not being applied in Mail. I will give you a screenshot of one of my rules:
    I have about five rules that follow the same pattern: search for particular string in the FROM field and mark it with a color if the string is present. These rules all worked fine in Snow Leopard. All of my rules are still present after the upgrade and all checked as active. When I "select all" messages in my inbox and press Option-Cmd-L the rules are applied properly. However, the rules are not applying themselves when new mail comes in. As far as I can tell this does not have anything to do with the mail not being recognizes “as a new message” like, for example, because the mail was already read on my phone. It happens even if my other devices are offline and the only thing I am using to check mail is my laptop.
    I am using a MacBook Pro 2.3 GHz Intel Core Duo with OS X 10.9.1, in case that matters.
    Thanks for any advice!

    I think I've found at least a partial solution to the Mail - Rules Don't Work problem:
    In "Mail" go to the menu Mailbox and click on Rebuild.
    If you have a lot of stuff, this will take several minutes to finish.
    I also reviewed all my rules and made a few minor changes.
    Mixed results:  I found that running "Apply Rules" didn't work on email already received; but new mail did.  I don't quite understand that, but I call it a partial success.

Maybe you are looking for

  • How to connect my ipod to itunes if my ipod is disabled and my top button is broken

    how to connect my ipod to itunes if my ipod is disabled and my top button is broken

  • Your Firefox profile cannot be loaded. It may be missing or inaccessible... Help!?

    One moment I was able to use Firefox just fine and the next, I'm getting a pop up message: Title: Missing Profile: Message: Your Firefox profile cannot be loaded. it may be missing or inaccessible. I cannot open firefox at all and I'm at a loss of wh

  • Java 1.4 under Redhat 7.2

    Dear all, I got the following message after I installed and tried to run java under RH7.2 Error occurred during initialization of VM Unable to load native library: /usr/java/j2sdk1.4.0/jre/lib/i386/libjava.so:symbol __libc_waitpid, version GLIBC_2.0

  • Managing Null Values in a string

    Dear all, I have an employee view with these columns ( EmpNo , FirstName, SecondNane, ThirdName, FamilyName ) now when i bring the full name am writing the following : ViewObject vo = ... Row vor=vo.next(); fullName = (String) vor.getAttribute("First

  • Help with setDate()...

    Hello... This query works just fine in command line: SELECT SUM(RECIBO.PRIMANETA) FROM RECIBO, WHERE MONTHNAME(RECIBO.FECHAPAG)=MONTHNAME('2004-10-10') Then I put a question mark (?) instead of the static date ('2004-10-10') to use the common prepare