Mail not displaying the email contents correctly

Im trying to use Mail on one of my machines.
Its not showing me the body of the email.
I can only see the intro part.
What the heck!
Switching between classic and regular view doesn't help I tried that.
What else can I do to fix this.

Hello Thomas
Can you try double clicking in the 'intro' part of the email where the cursor turns to a hand icon. Double click and it should bring up a separate window with the body of the email.
Tell me if that works,
xeni

Similar Messages

Mail not displaying Exchange emails sent from iOS devices

Got 10.7.2 on my MBP and iOS 5 on iPad and iPhone, all synced to my account on my company's Exchange 2003 server. Emails that I send from either iOS device do not appear in the 'Sent' mailbox on the MBP. Incoming mails all display correctly on all devices.
This only happens for the Exchange account – other IMAP (inc MobileMe) sent mails all sync OK. Is this just because the cheapskates won't move to Exchange 2007? Is there a work-around?

Well, it took about an hour but it looks like I'm back up and running.
Apparently, as Mail is retrieving messages it doesn't like to show them to you. So I went from 8/21/13 to tday instantly after almost an hour long background sync.

How do i only show photos as attachments in mail not display the photo

Hi
I am trying to send some photos by mail on my MBP but instead of just listing as attachments the complete photos are being displayed.
Can i prevent this from happening as it often results in the email being 10 ft long!!!!!
Best Rgds
Kev

There is a third-party program called Attachment Tamer that will do that for you. In the Terminal, you can type this:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
Also note that while Attachment Tamer does some things with the encoding that makes certain email clients display the item as an attachment, what shows up at the receiver's end is solely dependent on their email client and its settings.

TS3276 Problem with mail not displaying the arrow "replied"

Hi
I having a problem with my mail account. The arrow appearing on the side of a message after being replied do not appear anymore. It is therefore hard for me to keep track if I replied or not to a specific email. The email is still being sent and received.
Any help would be appreciated.

I am having the same issue. I have multiple imap accounts and one of the accounts does display the replied to arrow after replying to a e-mail. I have check every setting I can think of, with no sucess.. Any luck fixing this issue??

Report Writer not displaying the column heading correctly.

Hi,
We have generated the report writer using the transaction GR55 by logging in EN language.
But when we executed the report, column headings are not displayed properly, instead it is displayed some thing like $ZR07##ZCO-OI# $.
Please help us in solving this issue.
Regards
Shibin

Hi,
Problem solved. We need to generate the report writer in original language only and it will reflect in other languages. Directly if we execute in other language it will display correct headings.
if we generate in other language it will display wrong heading even in original language also.
So generate report writer in original language only
Regards
Shibino.

CS6 Ai not displaying the file preview correctly in the open dialogue window, any fixes?

Icon preview does not seem to scale correctly central to its column.
This also seems to happen on Cover flow view but you can not scroll across.

It's fine if you go through finder on desktop or via Photoshop but since updating Yosemite it's messed up Illustrator.
It's not scaling the preview correctly and it happens in Coverflow view too as I said.
Just wondering if there's a preference you can delete to reset the finder via Illustrator?

HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

I have Mac 10.8.4 with Safari 6.0.5.
Safari is not displaying the web content but images on the web page are being displayed.
Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
When I open Preferences of Safari & click on Security tab, It Crashes!!
Thanks,
Shubhi

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Safari will not display some media content despite Flip4mac loaded

As the subject indicates, Safari will no longer display some media content after installing Flip4mac. Where that media content would normally display all I see is a square with the Quicktime logo in the middle and a question mark in the middle. For example see the Dakar Rally site http://www.raid-live.com/dakar/en/index.shtml#. In my case Safari does not display the Flash content relating to "Premium Offers".
Mozilla displays everything fine though I don't particularly want to move between browsers depending on the on-line content. I'd rather not use Mozilla as in some cases the page appearances aren't as neat as those displayed by Safari.
Is there a way of restoring Safari back to its default settings in order get it to play ball.
Cheers
Chris

Also a possible explanation is Safari cache files. Safari can be quite stubborn about holding on to these and refusing to let go of a cache file for a page, not showing up-dated content. Since the new user account didn't have any cache files Safari displayed the file correctly there, and used a "bad" cache file in your original account. Even clicking reload doesn't necessarily force Safari to take a new look at the page code. Drives me batty sometimes. If that is the problem you can go to the Safari menu item, choose Empty Cache and try again. I'v had instances though where I had to empty the caches and quit and relaunch Safari to get it to display a page properly.
Another thing to do, to make sure something is a Safari specific problem rather than a system problem, is to download Firefox and try it with a funky page. If the page works in Firefox, but not Safari, you know it is Safari being funny and not your system.
My truck was running rough the other day when I moved it to wash it. Was not looking forward to using it to haul stuff the next day, but when I started it then it worked just fine....
Francine
Francine
Schwieder

ICloud mail not displaying email content

My iCloud mail account is not displaying the content of incoming emails, regardless of whether I access the account on my Mac, iPad Mini, or iPhone 4 (all with the latest OS).
The only way I can view the content is to select the email and hit the 'reply' button.
Any ideas how to resolve this?

It seems as though somehow the culprit is apple mail. Right now I have it closed and my messages seem to be coming through in both icloud.com and on my iphone. Tonight I think I will reset apple mail and hopefully that solves the problem. Have you ever had a similar problem?

My IPhone 4's mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. What is wrong with it?

My work recently decided to buy every full time employee an IPhone 4 to be used for work purposes. (I do suspect these are refurbished, but I don't think that matters) I have had no trouble with it, except for on occasion the mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. You know what I'm talking about...that bar at the bottom of the mailbox when you open an email that you use to delete, respond, forward, move, etc. It just goes away for no reason, and then reappears for a day or two, and goes away again. It is quite annoying since I can't respond to any of my emails without getting on my work computer. If you have any suggestions, please help!

Hi there,
You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Hope that helps,
- Griff W.

Mavericks Mail - Not displaying Smart Addresses Correctly

Using OS X 10.9.1. If I add a contact into Contacts (formerly Address Book), Mail does not display the smart address for that contact. But if I remove the email address from the contact entry in Contacts, Mail shows the email address as a smart address (hiding the email address and only displaying the name). Please see the attached image example.
Unchecking and re-checking Smart Address in Mail's Preferences is not fixing the issue. Rebuilding Mail has not worked, and neither is restarting.
Does anyone have an idea as to what is going on?

I see exactly the same behaviour in 10.9.1, but unfortunatelly so far didn't find a workaround for it.
But I can offer a slight bit more insight into it: When switching to classic view, the Smart Address is not used in the list view of all available mails, but is used correctly in the mail itself ... same holds true for your case. If you open the mail and look at the displayed name within it, the Smart Address will be used.
It somehow seems to be a bug in Mail to me, since an inconsistent behaviour between the two views seems everything but not wanted. I already submitted a bug report, but maybe an additional report from your side might be helpfull.
It would be also good to know if anyone else is seeing exactly the same inconsistency, simply to narrow down the possible glitch...

Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin Nambiar

If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error in Acrobat 8: An error exists on this page. Acrobat may not display the page correctly...?

Hi,
We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9. Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
Let me know your comments/suggestions.
Thanks!

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

Minimised Hotmail tab at botom of PC screen displays the email address I am using and I do not wish it to do so for privacy reasons

When I have to quickly minimise my e-mail account the tab shows in the bottom tool-bar of the screen but still displays the email address I am trying to hide. I wish it would not do this. In previous versions it just showed 'Hotmail' e.g. now it shows 'Hotmail: woody@ hotmail.com (e.g) for all to read if they are passing by or checking up on me!

This is caused by the changes Microsoft made to Hotmail. I could not find any setting s in Hotmail to change what was displayed. One option you can try is use the [https://addons.mozilla.org/en-US/firefox/addon/2987/ TabRenamizer] add-on.

Design Window is not displaying the correct view

Hi
For some reason the Design View on my CS3 is not displaying
the correct view.
It used to show how the web page would look but it is simply
showing up the wording and pictures surrounded by dotted black
lines.
I am using a template as a bases for all the pages and all
the pages are showing like this.
My other sites are showing up OK though.
When I Preview in Browser, it all shows up OK.
Can anyone help?
Bezz

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Bezz333" <[email protected]> wrote in
message
news:fttdsr$394$[email protected]..
> Hi
>
> For some reason the Design View on my CS3 is not
displaying the correct
> view.
>
> It used to show how the web page would look but it is
simply showing up
> the
> wording and pictures surrounded by dotted black lines.
>
> I am using a template as a bases for all the pages and
all the pages are
> showing like this.
>
> My other sites are showing up OK though.
>
> When I Preview in Browser, it all shows up OK.
>
> Can anyone help?
>
> Bezz
>

Mail not displaying the email contents correctly

Similar Messages

Maybe you are looking for