Mail not fetching new data every 15 with 3g turned off

I had to turn 3g off in order to improve my reception and battery life. It seems to help somewhat, however I notice that the Mail application does not fetch new mail every 15 minutes like its setup to do. It works fine in 3g mode, just doesnt do it while its on edge. (I think it also works ok on wifi.)

Perhaps your in an area with awesome 3g reception but really bad Edge. Weird huh.

Similar Messages

  • I've Lost cellular data network and emails after 5.0 upgrade.  "Could not activate cellular data network".  Have turned off and on, removed sim and also checked APN setting can anyone help...

    I've lost cellular date network, all unopened important business emails and internet access on my Ipad 2 after 5.0 upgrade.  Received "Could not activate cellular date network"  - I have turned on and off, removed the sim and checked the APN is correct.  Can anyone help - struggling and need for my business.

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • Mac Mail not fetching New messages  10.9.4

    This is on a MacBook Air (mid-2011) using OS 10.9.4   and for the past 6 days the Mail program has stopped fetching new mail.   The messages come thru on my phone but I have to restart the computer, check the connection doctor, restart a few more times & then finally the mail will start coming through again on the computer.  The log is consistently showing these errors:
    1  +[MFLibrary addMessages:withMailbox:fetchBodies:oldMessagesByNewMessage:error:] + 37 (Mail) [0x7fff8cad7fb9]
                                        1  +[MFLibrary addMessages:withMailbox:fetchBodies:isInitialImport:oldMessagesByNewMessage:err or:] + 82 (Mail) [0x7fff8cad7f8e]
                                          1  +[MFLibrary addMessages:withMailbox:fetchBodies:isInitialImport:oldMessagesByNewMessage:rem oteIDs:setFlags:clearFlags:messageFlagsForMessages:copyFiles:error:] + 116 (Mail) [0x7fff8cad7f2f]
                                            1  +[MFLibrary insertOrUpdateMessages:withMailbox:fetchBodies:isInitialImport:oldMessagesByNew Message:remoteIDs:newDocumentIDs:setFlags:clearFlags:messageFlagsForMessages:cop yFiles:progressDelegate:updateRowIDs:error:] + 4493 (Mail) [0x7fff8cad0800]
    Any clue on what the problem is or how to fix???
    Thank you,

    Back up all data. Rebuild the mailbox.

  • Settings Mail Autocheck replaced by Settings Fetch New Data on 3g?

    Hi, I was wondering if anyone can confirm that the 3g iPhone no longer has the "Auto-Check" function listed in Settings>Mail (above the Show, Preview etc fields; I don't see "Auto-Check" here like some user guides I have seen have indicated).
    Assuming this isn't a problem with my phone, is this function now replaced by Settings>Fetch New Data? If I disable the Push function and set the Fetch to Manual, is this the equivalent of a Manual setting in the old "Auto-Check"?
    I'm trying to set this up so I can resolve the mailbox conflicts I get between my iPhone mail and my MacBook Pro Mail app for two POP accounts (this has been discussed elsewhere; setting up my Pop accounts has been a nightmare!). Would opening an iPhone mailbox app automatically consitute a "manual" check?
    Basically I just want to be able to have my iPhone on while I'm using my Macbook Pro Mail app.

    Yes, "Fetch New Data" is auto-check in v2.0.x, as well as the place to turn Push email ON or OFF. Disabling Push and setting Fetch to Manual is the same as Manual - your email will only be checked when you launch the Mail app on the iPhone.

  • TS2621 settings will not allow me to click on email, it does not highlight email, account, or fetch new data

    Please give me some assistance with a problem that we have encountered with our ipod touch. We have lost the camera app, and most of all we need to change the email address on the ipod touch but when I go to settings, the email account, add account, fetch New Data will not highlight to allow me to click on them to access them to change them.
    I have forgotten the password on the ipod also, we set it when we first purchased it for my daughter and never used it again and we cannot remember for the life of us what that pass code is now.
    Thank you very much for your time with this matter.
    Catrina Hernandez
    <Email Edited By Host>

    Cat5214 wrote:
    I have forgotten the password on the ipod ...
    If you cannot remember the passcode, you will need to Restore the device...
    Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Individual settings under "Fetch New Data" not working

    Hi.
    I'm having problems getting the individual push/fetch/manual settings to work. Here's the scenario.
    I have three mail accounts set up on my iPhone 3G. They are "MobileMe," "GMail" and "Work."
    I go to "Settings" -> "Fetch New Data" and turn "Push" OFF. I then go to "Advanced" at the bottom and set "MobileMe (Mail)" to PUSH. I thought this would enable PUSH on my MobileMe account while keeping it disabled on the other accounts.
    However, my iPhone still won't get new mail automatically.
    What am I doing wrong?

    One thing to try that might help.
    If you turn push off in the fetch new data screen, then it is a global effect for all accounts.
    In advanced is how you want the accounts to behave.
    So, if you turn push off in the 1st screen, then go to advanced and set mobileme to push, push is still off until you go back to the first screen and turn it back on.
    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/HT2625
    Hope this helps.

  • Fetch New Data shows two entries for one account

    I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
    Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
    One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
    The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
    I tried deleting
    the offending Gmail account, but it did not delete the duplicate entries.
    erasing all settings
    all of my accounts, including iCloud, IMAP, and other accounts.
    The ghost account is still there, fetching calendars and contacts.
    Has anyone else seen this behavior?
    I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

    Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
    So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

  • Fetch New Data Issue

    Hi,
    I have 3 exchange accounts configured in my iPhone4 (iOS 4.2.1): 2 GMail accounts and 1 company account.
    My goal would be to check every 15min the GMail accounts, and only manually the company account.
    My configuration as follows:
    Fetch New Data > Push > Off
    Fetch New Data > Fetch > Every 15min
    Fetch New Data > Advanced > GMail accounts > Select Schedule > Fetch
    Fetch New Data > Advanced > Company account > Select Schedule > Manual
    I rebooted iPhone many times, but every time the app checks for GMail accounts (mail app is NOT already running), it checks for Company account too (even if fetch is set to Manual for this account), and it shows me mail counter on app icon (before to open the app).
    Shouldn't "Fetch New Data > Advanced" override "Fetch New Data > Fetch"?
    Please tell me if I'm going wrong or if there's a solution for this issue.
    Thanks a lot!

    After some tests, the problem seems to occur only if there are some non-read messages in the company account, when mail app check for other accounts.
    Any suggestions?
    Thanks

  • Sys_refcursor not fetching any data although query returns value

    hi!!!
    I am using sys_refcursor to return columns,and using below procedure to do so.Although data is there in table_1 and table_2.
    PROCEDURE test_pro(abc_date N DATE,
    cur_get_data OUT sys_refcursor
    OPEN cur_get_data
    for
    select A.col1,B.col2
    from table_1 A
    where A.dis_date=abc_date
    left outer join
    table_2 B
    on
    A.dis_date=B.dis_date;
    IF cur_get_data%rowcount=0
    then
         raise e_error;
    END if;
    EXCEPTION
         when e_error
         then
              ------no_data_found;
         when others
         then
    --------(giving SQL error with error code);
    END      test_pro;
    while running below sql in sql window of pl/sql developer fetching
    data
    select A.col1,B.col2
    from table_1 A
    where A.dis_date=abc_date
    left outer join
    table_2 B
    on
    A.dis_date=B.dis_date;
    but while testing the test_pro in test window of pl/sql developer it is
    not fetching any data and raising e_error each time
    is there any problem arising using IF cur_get_data%rowcount=0 as each time it is going to exception block..
    so can somebody please put some ideas what cud be the possible reason for this??

    Welcome to the forum!
    Unfortunatley you posted to the wrong forum. This question belongs in the SQL and PL/SQL forum.
    PL/SQL
    >
    sys_refcursor not fetching any data although query returns value
    but while testing the test_pro in test window of pl/sql developer it is
    not fetching any data and raising e_error each time
    is there any problem arising using IF cur_get_data%rowcount=0 as each time it is going to exception block..
    >
    A cursor doesn't fetch data - your code has to do that. The code you posted doesn't have any FETCH statements so no data will be fetched.
    There is no problem using 'IF cur_get_data%rowcount=0' but it will always be 0 in your code because you are not fetching any data.
    I'm guessing that you are trying to determine if there are any rows for the query. That isn't going to work since a cursor doesn't fetch rows.
    You just have to return the cursor to the caller and the caller will have to perform at least one fetch to see if there are any rows.
    If the above answers your question the just mark the question ANSWERED. Otherwise, since you have posted in the wrong forum
    1. repost the question in the SQL and PL/SQL forum
    2. Edit this post to add a link to the new thread in the other forum
    3. Mark this question ANSWERED so people will follow up in the other forum.
    Thanks.

  • Report is not fetching the data from Aggregate..

    Hi All,
    I am  facing the problem  in aggregates..
    For example when i  am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
    FYI.. Checked the characteristcis is exactely matching with aggregates..
    and also it is giving the  message as:
    <b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
    Can some body explain me about this error message.. pls let me know solution asap..
    Thankyou in advance.
    With regards,
    Hari

    Hi
    Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
    GTR

  • Mail not showing new messages on 10.8.3

    Mail not showing new messages on 10.8.3, but messages show just fine on iPhone. Nothing changed to make this happen, not sure where to start. Thanks.

    Back up all data.
    Select the problem mailbox in the mailbox list, then select
    Mailbox ▹ Rebuild
    from the menu bar.

  • Why in SE16 we can not  see New Data Table for standard DSO

    Hi,
    We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not  see New Data Table of Standard DSO.
    Regards,
    Sushant

    Hi Sushant,
    It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
    Sankar Kumar

  • New Data Connection with incoming XSLT.  Should DataView show the structure?

    When I Create New Data Connection with an XML file and an incoming XSLT transformation, the Data View doesn't show the resulting structure..just the original XML file structure. This makes it hard to bind xml elements in the transformation to a PDF form. It the XSLT only applied at "runtime"? If so, how to map elements? Thanks.

    I would suggest to create a receive data connection(secondary) to get data from your checklist
    Use this data connection to connect to your checklist and get all the fields that are required.
    Create a button in your form and add rules to assign and submit data to the list, after user clicks the button
    Add a rule to set values to source list with fields from Receive Data connection
    Submit the data to the list
    Close the form
    Hope this helps!
    MCITP: SharePoint 2010 Administrator
    MCTS - MOSS 2007 Configuring, .NET 2.0
    | SharePoint Architect | Evangelist |
    http://www.sharepointdeveloper.in/
    http://ramakrishnaraja.blogspot.com/
    Yes!  This is fantastic, I'll try this.  Quick question, would it be possible to send the data to a different list rather than the source?  
    My reasoning is this:  The secondary data connection list is intended to be sort of a blank slate, where the actual project requirements are listed and can be modified or edited as needed.  I'd like to keep that as the constant starting point.
     So could I possibly have the form submit the actual data to a separate list to maintain that?

  • I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone

    I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone as my icloud password is incorrect.  I have reset this several times and also cleared cookies history etc.  none of the above makes a difference.  Any ideas?

    The ONLY thing you can do to turn off Find My iPhone is to have the correct password. There is no way around it. You can get help with the password: If you forgot your Apple ID password
    If none of those methods are possible: Apple ID: Contacting Apple for help with Apple ID account security

  • After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping

    After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP

    Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
    Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
    and http://www.apple.com/support/ipod/service/battery/

Maybe you are looking for