Mail not found in Spotlight / Mail not backuped in Time Machine

On my OS X Lion Server 10.7.2 (on Mac OS X Server Mini), I am unable to search for any mail of the logged-on local user. Furthermore, no data from the Mail.app is saved in the Time Machine.
All other data can be found in Spotlight and all other data is backuped normally with Time Machine. The Mail.app works fine and is configured normally.

I think you have not placed mail.jar and activation.jar files in the /jre/lib/ext directory. Just place the mail.jar and activation.jar files in the jdk's /jre/lib/ext directory and check out. This will work for you.
Rkanthj

Similar Messages

Disk not ejected properly while making a backup through time machine

Hi everyone. I'm trying to make a backup by using time machine on an external hard drive LaCie of 2 TB. However, after storing 5 to 10 GB the backup stops and I get a message window saying that the disk has not been properly ejected and that I have to eject the disk before turn it off. Then I thought it was a format problem, I went to the disk utility and I chose the Mac OS extended (journaled) format and the GUID partition table since my Mac is intel-based. I started the backup again and I got the same message window saying that I desconected improperly my external drive. The strange thing is that in both cases the backup seems to be okay at the beginning and stores 5 to 10 GB, more or less, then it stops and the message window shows up. Then I went further, I thought I could fix the problem by completely erasing the disk; I went to the disk utility and in the erase tab I chose the Zero Out Data option in the security options. The system starts erasing the external hard drive, but after a while other message window shows up saying that there was an error eliminating the disk because of a POSIX reports, that the operation could not be completed and that memory could not be assigned. Does anyone know what's going on? What am I doing wrong? Thank you in advanced for your support.

Most likely, there's a damaged/corrupted file on your Mac that Time Machine is choking on.
Erase the disk (quick erase is almost always fine) and start over.
If the backup fails, See #C2 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.
EDIT: I should add, sometimes when Time Machine has a problem, it force-ejects the drive.

Survey was not found or it is not withing validity period

Dear gurues,
Hope you can help me with this issue in CRM 5.0
I have created one survey, it includes dynamic questions by using function modules PBO and PAI, and fortunately it works fine when testing in trx. CRM_SURVEY_SUITE.
Now i am trying to generate a URL by BSP. It works almost fine, but for some weird reason, once I type "Yes" or "No" for the first question of my survey (next questions depend on the answer of first one, if "Yes" - second question should be shown, if "No" - second question should be hidden), and then click enter, I get the following system message:
survey was not found or it is not within validty period.
I have already maintained the validity period under maintain survey attributes in trx. CRM_SURVEY_SUITE.
the idea is to use this survey in e-mail campaign.
i will really appreciate your input
Thanks
Karina

Hi Karina,
How you solved this issue...
I am also getting the same error...
Survey Was not Found or Is not Within the Validity Period.
In GUI it is working perfectly.
I tried the solution given by RAJA but it is also not working...
I added a cutom button... Function code is SAVE.
Didnt write any code for it..
When Pressing that button i got the above error....

Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.

Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.

Where are addresses kept on MAIL? I don;t like the new format at all. Frances
Begin forwarded message:
From: Frances Topping <[email protected]>
Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
Date: August 25, 2014 at 9:46:01 AM EDT
To: discussions-replies <[email protected]>
Old Entourage is POP and new Mavericks MAIL is IMAP I believe. I don;t know how to export in the forms you mention. Frances

HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. Could not complete backup to media share. The network backup disk does not support the required AFP feat

Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open. First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT1349 When my computer comes up, I always get this error message. AppleSyncNotifier.exe entry point not found. SqLite3_wal_CheckPoint could not be located in the dynamic link library SQLite..dll. What should I do?

When I start up my PC I get the following message. Apple Sync Notifier.exe entry point not found. Sqlite3_wal_checkpoint could not be locatedin the dynamic link library SQLite3.dll. What do I need to do to correct this?

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

TS3212 I cannot get the new iTunes to start in Windows Vista. I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.

I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.I have tried removing iTunes and reinstalling, I have tried "repairing" option at reinstall, nothing seems to work.

Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

The requested URL was not found, or cannot be served at this time.

Hi,
While processing the Reports request, the Reports CGI gives
the following error -
The requested URL was not found, or cannot be served at this
time.
The error is shown only when the URL exceeds more than 1500 -
2000 something. If i remove some of the parameters to make the
URL shorter then it works fine. Is there any limitation
regarding the length(number of characters) of the URL send to
RWCGI60. Immediate help would be appreciated.
Thanks in advance,
Aniruddha.

hello,
there is a limitation of the URL length. this limitation is
depending on the HTTP protocol and the used browser. it has
nothing to do with oracle reports.
a work around would transfer the parameter in the HTTP header.
regards,
the oracle reports team --pw

Hi, I have a macbook pro with a new hard drive installed. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files'

hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.

See E-10 in the first link.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC:    Enabled
DIMM Riser B/DIMM 1:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser B/DIMM 2:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser A/DIMM 1:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x42076007
DIMM Riser A/DIMM 2:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x4207631E
DIMM Riser B/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser B/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty

Webutil.host.HostBean not found WEBUTIL_HOST.execute will not work

Hi everyone:
I've got a form. I've attached webtill.pll and subclassed webutil.olb.
In the WHEN-NEW-FORM-INSTANCE trigger it does:
client_host('cmd /c cd > arch.txt');
When I execute my form I got the errror:
webutil.host.HostBean not found
WEBUTIL_HOST.execute will not work
Could anyone give me some help on it?
Thanks!
Carolina

Hi!
this is what I got in the Java console
JInitiator: Versión 1.3.1.22
Usar versión JRE 1.3.1.22-internal Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\Administrador
Configuración del delegado: sin delegado
JAR cache enabled
Location: C:\Documents and Settings\Administrador\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rx26201:7778/forms/java/frmall_jinit.jar from JAR cache
Loading http://rx26201:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://rx26201:7778/forms/java/jacob.jar from JAR cache
Loading http://rx26201:7778/forms/java/dgrImages.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La versión del applet Forms es: 10.1.2.0
thanks!

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Document not found. Excise posting not done or document is archived.

Hi,
I have created an order, delivery and billing document. Billing doc has been released to accounting. However though the accounting doc has been generated, the excise invoice is not generated and also BED, EDCESS & VAT amount not disable. When I was doing the Excise invoice (T code: j1iin) I got the following error
Modvat utilization done already for XXXXXX of Delivery No: XXXXX
Message no. 8I446
Diagnosis
Modvat utilization done already for mentioned billing document
Procedure
Check the billing document entered
If I click on display button after that I got error like
Document not found. Excise posting not done or document is archived.
Message no. 8I301
Diagnosis
The entered document number could not be found either because it is not
correct or the document has been archived
Procedure
Please check the entered document number
Plz help me what cud be the reason for that.
Regards
LVK

Dear LVK
Go to SE16, input Table J_1IEXCHDR and execute. There input the excise invoice number and execute. Check whether system is showing a document. Alternatively, without giving any data in the above table, just give the excise invoice date and execute. Check whether the said excise invoice is stored in the table.
thanks
G. Lakshmipathi

Error: The requested URL was not found, or cannot be served at this time.

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
If I run the report without parameter file it runs fine.
Does anyone have an idea on how I can make this work.
Thanks

* Can you please tell what version of Reports you are using ie 6i or 9i and the exact version [ In builder give Help->About] . In this problem we cannot deduce anything from the version. But if it is very old, we can recommend installing the latest patch.
* Please post the full command line request. If you have used any keys in cgicmd.dat , please post the expansion of that keys also.
* If possible as a workaround give paramform=no&paramName=paramValue ... in request till this problem is resolved.
Thanks
The Oracle Reports Team

Mail not found in Spotlight / Mail not backuped in Time Machine

Similar Messages

Maybe you are looking for