Mail not getting triggerred from Alerts in PI 7.1

Dear Freinds,
We have created alert categories and based on that created numbers of alert rules. Alerts are getting triggered and we recieve them in the Alert Inbox. We have also maintained user id's in Fixed Reciepents. But we want the same to go to email based on the user profile.
Please let us know what has to be done in order to recieve email as soon as alerts are getting triggered.
Thanks & Regards
John

Hi Kroninjer,
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
4) Notes:
750287 XI 3.0 Runtime Workbench: Alert configuration does not start
768456 Troubleshooting Runtime Workbench XI 3.0
813703 XI RWB alert configuration is incompletely displayed
840849 XI 3.0 Runtime Workbench: SSO2 is not active in this system
824039 XI30 Runtime Workbench: Display of XI alerts in CCMS
0000906044 XI30 Alerting: Wrong hostname in the URL of the XI Alert
0000905896 XI30 Alerting: Message without recipient creates no alert
0000904825 Synchronous message processing: Error in CCMS connection
0000902022 XI30 Alertrule insensitive to Receiver Interface
0000882215 XI 3.0 Runtime Wkbnch: Java Adaptr does not generate alerts
0000876546 XI 3.0 Runtime Workbench: Missing alerts
0000870232 XI 3.0 Runtime Workbench: New Alerting functionality
But start with this one!!!
913858 XI3.0 Alerting: Troubleshooting
Hope all these will help you.....Though assuming that you have configured alerts correctly it should work as it worked for me :-).
Regards,

Similar Messages

Alerts not getting triggered from Adapter Framework

Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
a) by running the test report 'RSALERTTEST'
b) from a control step in BPM.
<b>However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)</b>
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
<i> No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )</i>
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya

Escalation not getting triggered in Alert

Hi
I have triggered an alert from BPM which is successfully received both in my mail box as well as Alert inbox.
If the Alert is not confirmed, it should trigger an Escalation. In the Alert configuration I have maintained the recipient of the Escalation message, the tolerance limit and also have checked "Escalation Active"
But the Escalation is not getting triggered. Kindly advice...
Anup

Hi Anup,
Please go through these..
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4a/2dc1e0778648afa9e69d9a44244def/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
cheers,
Prashanth

Exit Class for Inbound Mail not getting triggered

Hi Gurus,
I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
I have made all the settings for SMTP.
Kindly guide me with the steps needed to be followed for triggering the Exit Class.

Hi
Check u have maintained ur outgoing mail server IP in SCOT transation.
Check link step to configure PO mail.
http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/

Workflow not getting triggered from MM01

Hi,
I understand there is a similar post but the solution is not so clear there.
I wish to trigger a workflow whenever a material is created using tcode MM01.
For which i am using BUS1001. (In the header data > start events tab > BO/BUS1001/CREATED binding exists and activated)
whenever i am creating a material using MM01, and check the trace in SWEL i am getting the following info:
BUS1001006     VIEWCREATED     25.03.2011     13:00:12          @AI@     No receiver entered
BUS1001006     CREATED     25.03.2011     13:00:12     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
Can someone please help where to enter the receiver.
regards
abhishek

Hi sanju,
I have created the event as per your suggestions but the workflow is not yet triggered from mm01.
the event stack trace is as follows :-
BUS1001     CREATED     28.03.2011     08:28:42     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
BUS1001006     VIEWCREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
BUS1001006     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
BUS1001     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
Linkage is activated in SWE2 and the receiver FM is SWW_WI_CREATE_VIA_EVENT.
still unable to get the workflow triggered.
Secondly as per SAP suggestion the BO BUS1001006 should be used for std material master. But while i enter BUS1001006 no such methods are available in F4. (refer atttachment)
I have checked in the BOR and i see that BUS1001006 is released and active.

Workflow not getting triggered from Action definition in CRMD_ORDER

Hello Experts,
I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
Regds
VLP

Please check in SWI2_FREQ whether the Workflow is really getting triggered.
Thanks
Arghadip

Mails not getting sent from Receiver Mail Channel

Hi ALL
I have a File to mail scenario , I see chakred flag in SXMB_MONI ..but mail are not getting triggred from the Receiver mail adapter..
I gave the URL like this smtp://sxd123.abc.com
and the respective E-mail ID's
I dont see any message in the communication channel monitering also ..wht could be the reson.. ?
Thanks
Souz

Hi Dominic,
Since you are not seeing any entry in the communication channel (receiver), I think there is a problem with your configuration. Check whether you have used the correct channel (of type MAIL) in the receiver agreement.
Regards
Suraj

Workflow not getting triggered from Z inbound FM

Hi
I have created a simple workflow with start events
Object Type IDOCAPPL EVENT - INPUTERROROCCURRED
activated the binding and activate the linkage
also in the idoc inbdound FM i put workflow_result = 99999 also added the object and the start and end event in process code link
however the workflow is not getting triggered do i need to trigger it manually using swe_event_create....
what is the miostake

Hello,
Even if the event linkage is configured correctly, you have to trigger an event with the FM swe_event_create to run your workflow.
You have a transaction SWU0 that can simulate an event => then you can check if your event linkage is correct.
Please reward if useful.
René

RSR_OLAP_BADI or RSR00002 --not getting triggered from RSRT --Please Help

Hi All
Quick reposnse is highly Appreciated and rewarded.
I wanted to implement a Virtual Key Figure .I have implemented RSR_OLAP_BADI .But when i execute query through RSRT .This BADI is not getting triggered infact its not reaching the Break Point which i have set in DEFINE and COMPUTE methods. I tried setting break point in user exit RSR00002 too but not working.
Is there any attribute or properties or any technical setting that have to be done for Query to trigger this BADI.Or any settings in BADI required ?
I am using infocube 0SD_C03 as the filter in BADI attributes.

Hi!
Check attributes for you implementation class.
In DEFINE method set rrke_c_mode-no_selection for your virtual char.
after that generate query in rsrt (if you set break in INITIALIZE method - you can debug)
then run the query (if you set break in COMPUTE method - you can debug if query return some data).

Alerts not getting generated from Alert rules

Hello
I had a problem displaying Alert messages in Alert Inbox.I have created my category and I am raising the alert from BPM and thats working fine.But in some cases where I have define rules(via Alert Configuration in Runtime Workbench) for Alert Generation alerts are not getting raised.I am having the two background jobs running as per the documentation.
I checked by creating a rule where sender was BPM and receiver is File and the alert should get generated when the Adapter fails(i gave wrond username for FTP server).
Any idea what step might be missing?
Thanks in advance.
Regards
Rajeev

Hello Rajeev,
have you checked in transaction ALRTDISP if the required alert has been created at all?
If yes, then have a look at the receivers, if no then check the following things:
- are your jobs running sucessfully?
- does the alert get created when you execute SALRTPROC report manually?
- are there old alerts of the same category not confirmed and flag surpress multiple alerts activated in the alert rule?
Best regards
Christine

Workflow not getting triggered from webdynpro event

Hello gurus,
I have a requirement in which if an employee changes his own information on the ESS portal, then an approval should be done by HR. For this i created a custom webdynpro application in which i fetch the employee data and check it with old data in one view and when user clicks save button the approval workflow should be triggered.
For this i created a custom BO using transaction SWO1. I added a 'CHANGE' event and 'send_data_to_wf' method.
In SWDD i created the workflow which is working fine when i test it in SWDD only. But when i trigger it using FM 'SWE_CREATE_EVENT', only the event is getting triggered and not the workflow. I checked the trace in transaction SWEL in which i can see the 'CHANGE' event under Event column but Name of Reciever Type column is emty. It should display my custom workflow ID. Please let me know where i m lacking or going wrong.
Regards,
Yayati Ekbote

Hello Ricardo,
Thanks for immediate reply. Yes, the linkage is active in SWE2. My custom object type is ZHRAD and event is change. I also tried the FM 'SAP_WAPI_CREATE_EVENT'. But in this FM the event also doesn't get triggered. Using FM 'SWE_CREATE_EVENT' atleast triggers the event. I debugged the FM. The container inside the FM is remaining initial. I am posting my code which i am using.
DATA: pernr TYPE pa0001-pernr VALUE '40000001'.
DATA: objtype   TYPE swr_struct-object_typ VALUE 'ZHRADCHO',
        objkey    TYPE sweinstcou-objkey,
        event     TYPE swr_struct-event VALUE 'CHANGE',
        it_wfcont TYPE STANDARD TABLE OF swcont,
        wa_wfcont TYPE swcont,
        event_id TYPE swedumevid-evtid,
        ret_code TYPE swedumevid-evtid.
wa_wfcont-element = 'PERNR'.
wa_wfcont-value = '40000001'.
APPEND wa_wfcont TO it_wfcont.
wa_wfcont-element = 'SUBTY'.
wa_wfcont-value = '1'.
APPEND wa_wfcont TO it_wfcont.
wa_wfcont-element = 'ENDDA'.
wa_wfcont-value = sy-datum.
APPEND wa_wfcont TO it_wfcont.
wa_wfcont-element = 'BEGDA'.
wa_wfcont-value = sy-datum.
APPEND wa_wfcont TO it_wfcont.
objkey = pernr.
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
    objtype                       = objtype
    objkey                        = objkey
    event                         = event
*   CREATOR                       = ' '
*   TAKE_WORKITEM_REQUESTER       = ' '
*   START_WITH_DELAY              = ' '
*   START_RECFB_SYNCHRON          = ' '
*   NO_COMMIT_FOR_QUEUE           = ' '
*   DEBUG_FLAG                    = ' '
*   NO_LOGGING                    = ' '
*   IDENT                         =
* IMPORTING
*   EVENT_ID                      =
*   RECEIVER_COUNT                =
TABLES
   EVENT_CONTAINER               = it_wfcont
EXCEPTIONS
   OBJTYPE_NOT_FOUND             = 1
   OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.

TS3899 Mail not getting messages from specific address

I am consistently not receiving emails from a specific address in my Apple Mail inbox, but I have no filters enabled and the emails are not showing up in my spam and trash folders. If I follow directions for retrieving an email header in Gmail, I am able to see the email, but this doesn't correct the problem! This problem seems to have surfaced spontaneously. What is going on?

HI ,
have at look at this link :
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step%252bby%252bstep%252bmail%252bto%252bfile%252bscenario
It contains the scenarios with "Mail to File Scenario using the Transport Protocol as IMP4 " as well as "Mail to File Scenario using the Transport Protocol as POP3".
Have a look at them.
Thanks,
Pooja

Exit in CNEX0009 not getting triggered from CJ20n

Dear All,
I am trying to use the exit ( EXIT_SAPLCOMK_001) present in enhancement package CNEX0009.
This exit description says that we can modify Material Components in Networks'.
But when we create a new material component in CJ20n, this exit is not getting called.
Has anyone implemented or used this exit anytime before. Any type of information regarding this exit will be helpful.
Points will be awarded for the replies given if found useful.
Regards,
rijuraj

Thanks for the replies
Hi Stu,
Yes I have done all the CMOD related steps properly.
Hi Amit,
It is mentioned in the enhancement documentation that we can use this exit to 'PROCESS MATERIAL components in network orders).
Also the exit EXIT_SAPLCOMK_001 contains the entries related to the material component that can be edited under a particular network(As per the enhancement documentation).
Please correct me if I am wrong
Regards,
Rijuraj

Alert is not getting triggered in QA

Hai Experts!
i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
Pls help me to solve this issue.
Regard's
Preethi

Hi
Schedule send job
please see as
help.sap says
Send Job
E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
i.         Choose View ® Jobs.
ii.       If no other job has been scheduled, choose Job ® Create.
iii.      Enter a job name and confirm it.
iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
v.        Choose Schedule Job.
vi.      Choose Schedule periodically.
vii.     Select the interval you require, such as 10 minutes.
viii.   Choose Create.
Refer this.
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

Hi..
For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
Click the pop up menu to the right of New messages sound to make a selection.

Mail not getting triggerred from Alerts in PI 7.1

Similar Messages

Maybe you are looking for