Mail not send in the same receiver oder in which intended......

Ive created the reciever list using the following stmt:
LT_RECLIST LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
at runtime im able to see the reciver in this table in correct order , but the mail header shows a different mailing order when mails are recieved.
Even im not using sort stmt. dont knw how mail order get disturbd. Is it on the SAP system to decide the order..??

no soln for that...
THanx,
Naveen VIshal

Similar Messages

  • Why will mail not send when it will receive?

    Mail receives correspondence on all accounts, but will not send on the grounds that the server forbids retransmission.  However it does work with wegbmail like yahoo and g accessed through safari.  How can I resolve this?

    Did you check the outgoing mail server setting in each account? Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • Outgoing Mac Mail always send from the same address?

    Hey y'all -
    I use 3 gmail accounts through mac mail for 3 different purposes - all fine. But when I send mail, regardless of what account I send it from, recipients always recieve my emails from the same address? E.G. I send an email from addresses 1 or 2, but when they are received they are from address 3? I've also removed address 3 from mac mail, but recipients STILL see address 3 as the sender. Can anyone help? Would a reinstall of mail be appropriate, if so what would be the effective way to go about it?
    Thanks in advance,
    Stu

    SOLVED IT!
    Right, I had multiple email accounts, all gmail, address 1 2 & 3.
    All mail went to the right addresses, fine. But when I compose, lets say from address 1 or 2, it ALWAYS ends up being received the other end by address 3. I only find this out until I get a reply delivered to the wrong address.
    SO  go to preferences, select one of the problematic addresses, then outgoing mailserver (SMTP:) in this case it will say Gmail. Click it so you get the drop down and edit SMTP list. There is a tab that says advanced. This is where I noticed the problem. On my list of SMTP servers I had one for my microsoft account, and then one Gmail one for all 3 gmail accounts. And what did I find for authentication? the username and password of the problem address that ALL my gmail accounts were sending through. You need to create SEPERATE smtp servers for each and every account, especially when using multiple accounts of the same kind (e.g. 3 gmails!)
    This fixed the problem for me perfectly and now my emails send from the CORRECT selected address. HOORAH!
    ALSO...
    Regardless weather it by gmail or hotmail you compose from, mac defaults to using the next working server. Before setting up seperate smtp servers for each gmail I just deleted the one that was there and then it started sending from microsoft account etc... just to clarify that it works regardless of account type!

  • Apple Mail not sending with the selected from address

    I have Apple Mail 6.2 on a MacBook Pro with ML 10.8.2.
    I have sever email accounts set up.
    I cannot get Apple Mail to properly use a given accout in the from.
    No matter what from account I what Apple mail to be from, the received email shows one of the other not selected accounts.
    So this means that the reciever replies to the wron & not intentded address.
    Example:
    I do an email in the [email protected] account & select [email protected] as the from address.
    The reciever will see the email from another address in Apple mail like [email protected] that I did not select.
    How do I get the Apple mail from email address to be the one I want the reciever to reply to?

    By associating each account with the correct smtp server.
    You have 2 gmail accounts, so 2 gmail smtp connectors, set them correctly.

  • My macpro keeps sending me the same email...a .emix format, and stores in a folder called recoverable mail...slowly fills up hard drive???

    My macpro "mail" keeps sending me the same 387Mb email...about every 2 to 3 minutes...slowly filling up my hard drive...storing the data in a file from my username/library/mail/recoverable mail....
    Very odd.  Don't know if it is malware...or something I have done by attempting to send a .mov that was too big to send via the server?
    I also cannot receive any new mail.  It is not AOL, because from my desktop Mac there is no issue.  It is my MacPro only.
    Andy

    Also, I keep trying to find a way to e-mail Apple about addressing this issue and about the information I am now finding on MacBook HD failures, but I keep getting led in circles in the support section of the website. Anyone know which email I'd use to contact them about this?

  • TS3276 Hotmail on Mac Mail not sending attachments

    I have my hotmail account set up with Mac Mail. I can send & receive emails without any problems, however as soon as I attach anything (small or large) it will not send. The same attachments will send fine if I log onto Hotmail through Safari/chrome. This has only been happening in the last week or so.
    What do I need to do?

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Out going mail not sending in mavericks

    I've had this problem since upgrading to mavericks, mail not sending and the sntp server showing off line.
    I"VE FIXED IT!!!!
    Guys hope this helps, the ports show default - 25, 465, 585 in edit smtp settings. Check the next box down - use this port and type in 25, I know its in the default list but its sent my mail when using the custom port.
    Hope this helps, I spent all day yesterday on to my server supplier and onto chat with Apple in US but couldnt solve it.
    Best of luck!!

    For the past few weeks, I have been noticing a similar problem: access to 11 email accounts, and three domains, is blocked on occasion. According to my web hosting company, this is happening because some process was attempting to connect via port 585, an insecure IMAP port; and that an automatic firewall rule was invoked to block those attempts. The blocking would last for about one hour after the last attempt was made to connect.
    I'm running Mavericks. If I quit Mail, then restarted one hour later, the problem was resolved. UNTIL Mail attempted to connect to my mail servers, upon which the blocks were triggered again.
    I downloaded Little Snitch. It told me, unsurprisingly at this point, that three email accounts were attempting to use port 585 to connect to their mail server. But I DON'T USE IMAP with those accounts! Why Mail is attempting to connect to a port which I haven't configured it to use is the puzzle.
    The solution for me: tell Little Snitch to deny any access via port 585.

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • HT1386 I can't synchronise phone 5s with mac book pro. mac message me : the i phone could not be synchronised because this computer is no longer authorised for purchased items that are on this i phone. then go and authorised mac but keep send me the same

    I can't synchronise phone 5s with i tunes . mac message me : the i phone could not be synchronised because this computer is no longer authorised for purchased items that are on this i phone. then go and authorised mac but keep send me the same message.

    Hi john,
    Follow the troubleshooting steps in this article:
    http://support.apple.com/kb/ts1389
    Cheers,
    GB

  • Mail Not Sending, No Advice Working, Lion Mail Settings Mixed Messages

    I've tried all the advice I've seen on this issue. One thing that applies to me that I don't see mentioned elsewhere, is that while all the servers show Offline in Mail/Preferences, if I go to the Mailbox dropdown, it will show Take Accounts Online as inactive, and Take Accounts Offline as active. So since upgrading to Lion, it has a mixed message within itself. This *must* be part of the problem??? Will others please check this and report if they show the same inconsistency, so Apple will see there is a glitch in their software?
    Then, when I try to change ports or anything in Mail/Preferences, I get this message:
    "The servers marked with alert icons are in conflict and cannot be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
    But *no alert icons show* next to any servers in the list, and no servers are sharing the same address and authentication settings. Well I have three gmail accounts, so I have three servers, one for each one, that share the gmail smtp (address?) and settings, but don't share the same email address. Which address does this message think is being shared, the accounts' email addresses or the smtp address? I've always used separate server settings for each gmail account because you have to enter different passwords. This should not be an issue.
    I've have tried every which way to solve this. It's clear to me that it's Lion related, *not* my email host server.
    Have five days of emails in my Outbox and have spent a couple hours trying to resolve and getting desperate for a solution. No Mac store near me :-(

    I now discovered that after the last procedure, when I look at Mailbox > Online Status > the settings for the two working accounts appropriately show Online and the one for the non-working account appropriately shows Offline. But asking it to go Online doesn't work. Also, whereas before, even though the two accounts showed Offline in Preferences, you'd go to the Mailbox menu and the only option at the top was to Take All Accounts Offline (when they already were in Preferences). Now I have the Preference list accurate as to what is on and off and there is an option in the Mail dropdown for taking all On or Off. So I just have one more glitch to resolve on the remaining account that won't send out. Clear as mud? Does anyone care lol!

  • Multiple Address Book Entries that all send to the same GW account ?

    Our CIO wants a few address book entries that if chosen, will all send to
    the same account.
    Seems easy enough but I haven't found a way, without creating a new account
    that has some Forward or Delegate rule.
    Is there a nicer way to do it without having another real GW account created
    and using Rules?
    I was kind of hoping to just create an External User that simply points to
    the one account but it complains that that e-mail address already exists.
    Thanks
    Marc

    Marc Charbonneau wrote:
    > Our CIO wants a few address book entries that if chosen, will all
    > send to the same account.
    >
    > Seems easy enough but I haven't found a way, without creating a new
    > account that has some Forward or Delegate rule.
    >
    > Is there a nicer way to do it without having another real GW account
    > created and using Rules?
    >
    > I was kind of hoping to just create an External User that simply
    > points to the one account but it complains that that e-mail address
    > already exists.
    Why not using nick names ? The only downside is gw7 and earlier
    nicknames don't show up in the address book. GW8 does show the
    nicknames in the address book.
    Cheers,
    Edward

  • Mail Not Sending; Recreate Account?

    Comcast sent me an e-mail saying they had blocked the sending of email on port 25 (I was actually using 995), and that I should change my settings to send email on port 587. True, I could not send, but I could receive. When I switched to 587 (with password authentication and no SSL) I still could not send, and now get an alert saying "The connection to the server 'mail.comcast.net' on port 587 timed out." Note that it mentions the Incoming server as the problem, and not the Outgoing server, which is set to smtp.comcast.net. Now Comcast advises me to re-create the account. Is this the right thing to do, and how do I re-create an account without losing everything in mailboxes? Thanks.

    Comcast sent me an e-mail saying they had blocked the sending of email on port 25 (I was actually using 995)
    No, Port 995 is a receiving port, not a sending port.
    Now Comcast advises me to re-create the account.
    Do this:
    1. Quit Mail if it's running.
    2. Go to ~/Library/Preferences and delete the com.apple.mail.plist file.
    3. Restart Mail, setup your account(s) again and wait for Mail to find your existing mailboxes. Then check to see if the problem persists.
    Mulder

  • EDI message is not sending to the third party for one particular SA

    DearAll,
                   We have the scenario to send the schedule lines to the third party system. for one particular schedule agreement schedule lines not sending to the third party system.
    while processing the messgae it is giving the error as "Message XEDI already processed on 20110317 070042"
    What could be the reason?.. we have checked all the EDI settings maintained for this supplier. some two weeks back there is no problem now only getting this message.
    how to resolve this?..
    Thanks in Advance
    Ananth.

    Hi Hareesh,
    Thanks a lot for the help. I have tried with removing the xml namespace, still the same result. I believe, the problem is with MTs tag in response message structure, bank xml data is trying to map with the response structure in PI, but when its finding the MTs tag I believe then its not mapping, and directly its passing the response in SXMB_MONI without any mapping.
    My question is how can I define my response structure without the MTs tagm, I mean same as what I am receiving from bank.
    Also I tried with without any mapping in response structure, I mean I used only one Message type for "response from bank" to "response to ECC" , without xml namespace, in this case I am able to receive the response in ECC, but there is exception called "PARSE_APPLICATION_DATA Error during XML => ABAP
    conversion: Response Message; CX_ST_MATCH_ELEMENT in " while receiving response, and when I go and see the logs, it says "System expected element 'MT_Response_MT940_Test'" , as its try to match with the defined structure in PI.
    Please experts help me, so my question is how can I avoid the MTs tag in my response structure, I just want to define my response structure in PI same as bank is sending me the data in xml tag, without any MTs tag.
    Thanks,
    Farhan

  • I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

    I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account.  Help.

    I HAD two accounts because of this problem.  I completely removed the problem account from the Apple Mail client.  Guess what is happening??  That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening.  This is incredibly frustrating.  When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system.  COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

Maybe you are looking for