Mail not triggerring inside the condition.

Hi,
I am facing a problem when approving commercial validation through workflow
I have created an condition and inside the condition i have added the send mail
the email is sent if i put it outside the conditions
but if i put inside the conditions.. in the log and in the technical list
it shows status that mail sent
but when i see the log in the SOST transaction
it shows an grey icon with an status message 672 (no data to send in the que)
can anyone guide me, what would be the problem..
Thanks & Regards
dhinesh

dinesh,
technically a condition should not have any impact on the execution of send mail step except for that the condition should be satisfied for that branch.
try the following steps to find the problem
- check the binding of send mail step
- moreover instead of sending external mail try to send to sap inbox

Similar Messages

BBP_PO_SEND_XML - Not triggered during the creation of PO

Hi All,
We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
Thanks,
Phani.

Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.

ChaRM: Mail not triggered when current user = mail receiver?

Dearl all:
     Ive noticed that mails are not triggered when the user who is processing a document is the same who will receive it. Is there any way to deactivate this functionality?
Thank you very much,
Federico.

Hi Miguel, how are you?
      I think it is a nice feature not sending a mail when the user who is changing the status in the one who would receive the mail in that next status. But Im in the testing pahse of implementing SOLMAN and I would like to know if this is a real feature or a flaw, and besides I would like to turn off this possible feature, just for the testing phase. This is not a big deal anyway.
    By the way, I also notice that if there is a partner assigned multiple times to a document, it doesnt trigger the mails as expected.
Best regards,
Federico.

Price was not picking from the Condition type for Item Category 'P' in PO

Hi Experts,
I Created one condition type based on Material and WBS which price was fixed based on this
I used the Purchase Order having Item Category P or Q Price should pick from the condition type where I mapped the WBS Element and Material.
The Net price was not picking from the Condition type Record. Why? What should be the Problem?
Whether my logic is correct or not?

The Scenario: I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
Please help on this.
Thanks
Muthukumar

Hi,
In standard configuration you cannot set item delivery date as a pricing data.
Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
IMG link:
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
hope it helps.
regards,
wojciech

Apple mail not showing all the messages?

In Apple mail, for my icloud account, I have some mailboxes which show the wrong number of messages, it shows too few.
As an example, a mailbox contains 150 messages, but apple mail reports there are only 146.
I rebuilt the mailbox and let apple mail do its thing. In the activity window I can see there are 150 messages. Yet, once apple mail has finished rebuilding the mailbox, it still tells me there are 146 messages. What's going wrong? Why would apple mail not show all the messages while in the activity window it clearly shows it knows there are 150?

Solved!
This was too weird to be real. Apple mail does not show messages it believes to be duplicates, and buy, does it make big mistakes in deciding what are duplicate messages and what not! Some of my mailboxes had over 100 "duplicates" not showing according to apple mail.
I found a solution thanks to this topic:
https://discussions.apple.com/message/18265121#18265121
defaults delete com.apple.mail AlwaysShowDuplicates
does yield an error in 10.8.2 ( Domain (com.apple.mail) not found. Defaults have not been changed. )
defaults write com.apple.mail AlwaysShowDuplicates -bool true
Does work brilliantly though!

My pic cd is not going inside the mac

my pic cd is not going inside the ma

also, when i click on one of the other tabs, the about tab stays highlighted. not sure why this is happening to this one tab and not the other
s.

Workflow mail not triggering for PO's to the Manager

Dear Seniors,
I am creating a PO and keeping in hold and later on saving the PO. But for those kind of PO's, the manager is not getting the mail for approval. But if i create a PO without keeping in hold with same data, system is triggering the mail to the manager. Why is it so? how can i make the settings to trigger the mail for hold-saved PO's. Please guide me.
Regards,
Prasath J

Hello Prasath,
Please check your configuration on ERP/ECC
side in transaction SWETYPV. Here you can enable or disable the
event type linkage for BUS2012 and for CL_SE_PUR_PO_WF_OUT or any
customer-specific business object related to Purchase Orders which might
be in use. If you disable the event linkage for CREATE and/or change
event, no message will be triggered upon PO creation.
If this is not sufficient for your business process the usual logic is
that all Purchase Order message are being sent out when the event
linkage is active (e.g. you want to send out only some of the message
types possible). In this case you might want to make use of BAdI
PUR_SE_PO_INTERFACE_OUT_SELECT (enhancement spot / BAdI)."
Enhancement Spot: PUR_SPOT_SE_PURCHASE_ORDER
BAdI Definition: PUR_SE_PO_INTERFACE_OUT_SELECT
Interface:        IF_PUR_SE_PO_IF_OUT_SELECT
BADI definition   PUR_APPL_SE_POCONF_IN_ASYN
Also in the standard, for the following messages
   PurchaseOrderChangedInformation_Out
   PurchaseOrderERPRequest_Out_V1
   PurchaseOrderERPConfirmation_Out
we are sending out these information as soon as a purchase Order is
created. We do not distinguish between the services all of them will be
triggered.
Hope this hepls
Ray

Mails not triggering in CHARM

Hi Experts,
I have configured Solution Manager 4.0 for CHARM. It is working fine. My requirement is that, it should trigger mail whenever support team changes.
Initally, I defined a action to trigger mail once whenever a support team is assigned. It worked fine. But the problem with this setting is that, whenever I change support team, it is not triggering a mail and this is understood because I configured to trigger once only. So, I changed the setting of action to "unprocessed", it starts triggering mails whenever I change the support team.
Now Issue is that, it is also triggering the mail to support team whenever the transaction is saved (Ex: When I create change document for a support message, transaction saves automatically) even though support message is not changed. This leads to unnecessary mails.
In order to avoid unnecessary mails, I deleted the existing action and created a new one wherein start condition was not maintained but maintained setting under scheduled condition as per SAP note 865619 and implemented BADI also.
Now I am not getting a single mail whenever a support team is assigned or changed.
Any suggestion please provide.
Thanks in advance.
Regards
Kumar

Hi Kumar,
This can be done very well.
For this you can implement the BADI ORDER_SAVE, method CHECK_BEFORE_SAVE.
In this method you write a code as mentioned below,
1. Use FM
WA_HEADER = IV_GUID.
Insert wa_header into table lt_header.
CALL FUNCTION 'CRM_ORDER_READ'
 EXPORTING
 IT_HEADER_GUID = lt_HEADER
 IT_ITEM_GUID =
 IMPORTING
 ET_CUSTOMER_H = lt_customer_h
 ET_ORDERADM_H = lt_orderadm_h
 ET_OPPORT_H =
 ET_PARTNER = lt_partner
 ET_STATUS = It_status
 ET_REFOBJ = lt_CRMT_refobj_WRKT
 ET_SUBJECT = lt_CRMT_SUBJECT_WRKT
 EXCEPTIONS
 DOCUMENT_NOT_FOUND = 1
 ERROR_OCCURRED = 2
 DOCUMENT_LOCKED = 3
 NO_CHANGE_AUTHORITY = 4
 NO_DISPLAY_AUTHORITY = 5
 NO_CHANGE_ALLOWED = 6
 OTHERS = 7
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2. You will get the Business Partners entered on the screen in the internal table lt_partner, read the address number1 for the partner function of the support team.
3. Get the contents from view CRMV_LINKPARTNER using the LV_GUID. And get the address number2 for partner function of the support team.
4. Compare the address number2 & address number1. If they are not equal then trigger a mail else don't.
Let me know if you need some more help.
Reward if it helps.
regards,
mahantesh

Mail 'not downloaded from the server'

Recently, I have been getting the message
"The message from Xxxxxxx (this is my account name) concerning “Xxxxxxxx (subject of the message)” has not been downloaded from the server. You need to take this account online in order to download it."
This happens whenever I try to open old mesages, sent or received. But usually only happens after the program has been working fine for a few hours!
If I quit Mail and restart it, all is OK for a while. But it usually happens again.
Can anyone offer a solution, please?
Very many thanks!

Mike,
In addition, the followup if you are using Mail 1.3, and the statement that this message is almost certain to be caused by an Overstuffed Mailbox, typically caused by size and large numbers of messages of diverse types is to see:
http://discussions.apple.com/thread.jspa?threadID=121837
and the important link it contains of:
http://docs.info.apple.com/article.html?artnum=25812
There are a few conditions caused by files that might not be needed, if any were leftover from Jaguar's mailbox structure, but somewhat rare. After you read these, let me know what you find, and any questions you may have.
Ernie

RSPPFPROCESS - mail not triggering for incorrectly processed PO

Hi All,
I tried executing the RSPPFPROCESS by giving a variant but I am not able to get the details of any incorrectly processed purchase orders in the output.
The RSPPFPROCESS program functions in such a way that if a PO is unsuccessfully processed, then on executing the RSPPFPROCESS program with status "Unsuccessfully Processed" a mail will be triggered to the creators whose POs were incorrectly processed.
But this is not happening in my case, the mail is not getting triggered at all.
The variant details are:
Application : BBP_PD
Action Profile : BBP_PD_PO
Action Definition : STANDARD_PO
Promotion status : 2 (ie)incorrectly processed
Processing type : MET
Time of Processing : Processing when saving document
The radio buttons: Ignore "Repeat" flag and Ignore "Generated Manually" flag are checked.
The check box "Number of Actions Outputted" is checked.
Please help.
Thanx in advance.
Regards,
Mary Catherine

Hello Prasath,
Please check your configuration on ERP/ECC
side in transaction SWETYPV. Here you can enable or disable the
event type linkage for BUS2012 and for CL_SE_PUR_PO_WF_OUT or any
customer-specific business object related to Purchase Orders which might
be in use. If you disable the event linkage for CREATE and/or change
event, no message will be triggered upon PO creation.
If this is not sufficient for your business process the usual logic is
that all Purchase Order message are being sent out when the event
linkage is active (e.g. you want to send out only some of the message
types possible). In this case you might want to make use of BAdI
PUR_SE_PO_INTERFACE_OUT_SELECT (enhancement spot / BAdI)."
Enhancement Spot: PUR_SPOT_SE_PURCHASE_ORDER
BAdI Definition: PUR_SE_PO_INTERFACE_OUT_SELECT
Interface:        IF_PUR_SE_PO_IF_OUT_SELECT
BADI definition   PUR_APPL_SE_POCONF_IN_ASYN
Also in the standard, for the following messages
   PurchaseOrderChangedInformation_Out
   PurchaseOrderERPRequest_Out_V1
   PurchaseOrderERPConfirmation_Out
we are sending out these information as soon as a purchase Order is
created. We do not distinguish between the services all of them will be
triggered.
Hope this hepls
Ray

PO Response mail not triggering in SRM SUS

Hi,
We are on SRM7 wtih ECC 6, When user click on Process, Confirm all and Send for a PO from SUS corresponding XML "PurchaseOrderConfirmation_Out" not triggered in SRM.
with the same settings in Dev and Quality xml triggered successfully but not in PRD
If any one come accross the same issue, please share the solution.
Regards,

I think the shopping cart must be waiting for some approvals...
Please check the workflow log of the shopping cart...
PO will be created..once the shopping cart is released....

Lion Safari 5.1: pdf file is not opening inside the iFrame

"When trying to open the pdf file inside the iFrame, it is opening outside the iFrame in Preview Application and leaving behind the iFrame as blank . Earlier with Safari 5.0.5 version this problem was not coming and pdf was opening properly inside iFrame".
When I am creating a sample html file with below code, the pdf is opening out side the iFrame.
<iframe height="900" width="100%" src="TestPDF.pdf" id="displayPDF"/>
Can any one please help me out to resolve this issue and open the pdf file inside the iFrame with latest Lion Safari 5.1

I think the problem must be limited to the iframe tag in particular, or frames in general. One of my websites has links to pdf files that open directly in the browser (see http://www.raffca.org.uk/docs/association_rules.pdf), but I have been unable to see a pdf if it should be loaded within a frame (such as at http://www.london-gazette.co.uk/issues/59866/supplements/14713); this latter page is not an iframe, but it is giving the same symptoms. I have removed any presence of the Adobe Reader plugin (I don't use Adobe Reader at all), so it is clearly a problem with Safari's built-in interpretation of frame/iframe PDF presentation. It's probably worth passing this on to Apple as a problem.

TS3276 Yahoo! sent mail not updated in the server.

I have an issue with Yahoo! Mail. When I'd sent email from my Mail from my mac book air, it can be sent but a copy is not updated in the server, thus when I view from the web or other device I can't see it as it is not updated. I've checked the "store sent msg in server" in the mail preference.
I don't this issue with exchange and gmail.
Thanks

Right that is how the POP email protocol works. If you want all mail sent and received to always be on the Mail Server then you have to use a mail provider that allows, uses, either IMAP or MS Exchange.

Importing Parameter (/1BCDWB/FORMOUTPUT) Not filled - Inside the RFC

Dear All,
I am Calling the Adobe form Inside the RFC Function Module, problem i am facing this Importing Parameter /1BCDWB/FORMOUTPUT not filled.
Based on the Importing I need the XSTRING Data
CALL FUNCTION <Function Module name>
 EXPORTING
 /1BCDWB/DOCPARAMS = fp_docparams
 <> = <>
 IMPORTING
 /1BCDWB/FORMOUTPUT = fp_formoutput
Note:Other Tables are filling in the Function Module.
Please help me on this.
Thanks,
Kanagaraja L

Hi,
Pls refer :
Re: how to call the adobe form from se38

Apple Mail not sending with the selected from address

I have Apple Mail 6.2 on a MacBook Pro with ML 10.8.2.
I have sever email accounts set up.
I cannot get Apple Mail to properly use a given accout in the from.
No matter what from account I what Apple mail to be from, the received email shows one of the other not selected accounts.
So this means that the reciever replies to the wron & not intentded address.
Example:
I do an email in the [email protected] account & select [email protected] as the from address.
The reciever will see the email from another address in Apple mail like [email protected] that I did not select.
How do I get the Apple mail from email address to be the one I want the reciever to reply to?

By associating each account with the correct smtp server.
You have 2 gmail accounts, so 2 gmail smtp connectors, set them correctly.

Mail not triggerring inside the condition.

Similar Messages

Maybe you are looking for