Mail notifications in 10.9.2 open message window not Mail

With yesterdays 10.9.2 update clicking on Mail notifications now opens new messege window with that email, instead of just highlighting it in main Mail wondow. This is amazingly annoying and nonproductive. Is there a way to switch it back?

I found an other thread on the same subject:
https://discussions.apple.com/message/24987456
No solution for the moment :-(

Similar Messages

Open Message Windows Missing After Reboot

I have experienced this issue after Apple Mail has to reboot for a variety of reasons, i.e. quit and reopen, reboot, basically any time Mail has to reopen. When it does, often many of the open message windows which I have open at the time are not reopened upon reopening Mail. It seems to occur whenever there is something which "interrupts" the reopenning process, as when I attempt to open another program, Safari for example, before Mail has fully opened.
While I do not want to keep too many message windows open at the same time, keeping the ones which I do have open works for me as an organizational tool, as in I need to address the open windows. But, if they do not reopen the next time, they get lost in my overly massive inbox.
Anyone have a solution, other than completely reworking my use of open message windows as an organizational tool?
Thanks in advance for any and all ideas,
TenaciousB

> controller. however enabling this option will cause the windows boot
> process very slow.
Your users won't notice it :-)
Anyway: To avoid the procmon thing, just think about "what" could delete
a service?
Group Policy Preferences comes to mind first, then computer startup
scripts and scheduled tasks. Grab a RSoP report on the affected server
and check what's applied at all.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

SMS: unable to open. message format not supported...

hey folks i've seen a bunch of guys asking this same question on another threads with no reply, is this a OS bug or something? from time to time i received SMS from my contacts and sometimes I am not able to open them and i got a message: "unable to open. message format not supported Symbian" even though i can read some text from the preview list.
any workaround?
thanks!
Powered by Nokia X6

try a reset there could be a file in the message which phone wont support
*#7370# security code 12345 back up your data 1st
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Unanle to open message format not supported

i have a nokia 5530XM , from time to time i received facebook updates on my cell as a SMS , sometimes I am not able to open them and i got a message: "unable to open. message format not supported even though i can read some text from the preview list its a simple text mesage....this thing only happens to facebook updates SMs and i can open other text messages on my cell ...i ve tried to format the phone and reset it but again same problem occurs ..
plsss help thanx ....

@r3devil11 - sorry about late reply. So far R&D folks have not been able to reproduce this issue. One advice was to try changing text related settings in Facebook settings page and see if that has any effect.
There are some other threads where similar issue has been discussed (e.g. here) where some users mentioned that Facebook messages have been working but suddenly stopped (and they are seeing same message) so, could be that something has changed in a way how messages are delivered. Maybe you could also check with operator support if they are aware of any issue with Facebook messages in their network.
-ThreeOs

Command-T opens new window not new Tab with Snow Leopard

Does anyone else have this issue? Command-T opens new window not new Tab with SL.
And yes all my settings are correct!!

Greetings,
If your preferences for Tabs are correctly set (the top two checkboxes are checked) and it's still opening a new window, then it would seem your preferences may be corrupt. In that case, you should quit Safari, go to Home/Library/Preferences and delete the com.apple.Safari.plist file.
Then restart Safari, setup your preferences again, and test to see if it works.

Open Browser Window - Not working correctly.

I click the thumbnail on my homepage, I get a larger image in
a new window. Unfortunately, the homepage also redirects itself to
the larger image. You can see this at www.real9.com
I want the homepage to stay where it is, but the larger
window to open in a new window. I used the Open Browser window in
Dreamweaver to set this link up, but its not doing what I want it
too.
Help would be much appreciated, I have been trying to fix
this problem, but no success.
Thank you.

On Sun, 08 Apr 2007 21:01:21 +0100, djinn
<[email protected]> wrote:
>In the link fields for rather than linking to the file or
image - enter
>this........
>
>javascript:;
That's one way of handling it. My own preference is to leave
the link in
there and add a return false after the onclick handler. That
way the
link will still work if JavaScript is not available.
To implement that, your onclick for the link looks like this:
onclick="MM_openBrWindow('pics/inside_large.jpg','LargePicture','width=640,height=480')"
Change it to:
onclick="MM_openBrWindow('pics/inside_large.jpg','LargePicture','width=640,height=480');re turn
false"
Careful of word wrap. It's all on one line.
Gary

Open browser window - not working right in different browsers

My client wants to link to a video on another company's site (he has permission). When I use the DW behavior of Open Browser Window in a specifc size it acts weird, depending on which broswer is used. I've used this function many times over the years and never had this problem until now.
Here is the page: http://www.jesseyoung.com/clients/pristine/services/chimney_sweeps.shtml If you click on the blue graphic "Chimney safety institute of America" it is supposed to open in a 620x460 window. But the client says that sometimes it opens a second full browser window of the site, and also a window with the video, which is not sized properly. It happens with Safari and Firefox, on both is Mac and PC. On my PC it all seems to work fine.
Any suggestions? Could this be something to do with the fact that the video is hosted on someone else's site?
-Jesse

Try this tutorial:
http://alt-web.blogspot.com/2012/03/create-pop-up-window-in-dreamweaver.html
Nancy O.

Want to open multiple windows not tabs; won't let me.

I have Windows XP. Since I upgraded to 7.0.1 (and today 8.0) I have not been able to open multiple windows of Firefox. I have not ticked OPEN TABS INSTEAD OF WINDOWS, but Firefox either opens nothing at all, when I try to start a 2nd window of it, or it opens a tab. Please fix this.

Does it still happen ifyou start Firefox in Save mode?
*Help > Restart with Add-ons Disabled
If it does work properly in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Master Password Feature: After sometime (10-15 min.) the drop down list for the field on any site does not show; opening new window (not refresh or new tab) drop down appears.?

I manage a ton of accounts for different customers suing the same login pages (GoDaddy, WordPress, etc.) I use the Master Password Feature to help keep track of the many variants in logins and passwords.
After some unknown period of time, even closing the page tab so a new page session is started at the remote server, Firefox does not provide me with the usual drop-down selection list of the previously used login names. However, if I open a new FF window (file/new window) from the menu bar, the drop down becomes available.
How can I refresh the original window session in FF or change the timeout length?

Well, you said LOV...that might mean you are using JDev 11g. Are you? If so what technology stack are you using?
Assuming you are using JSF (?) you might be "backing" your list component in the application scope...but that is not likely.
If you are using ADF/BC on your business component level, you can clear your view object from which you are querying the possible values of this list...unless your you have made a method to compile this list...in which case you know what you are doing...so that is probably not the case.
Essentially you want to requery the VO upon which your LOV is based...unless you are using JPA or something...and then I know "requery" is not the right word...is it?

Link to Open New Window not working on Intranet

I hope someone can help me. I created a PDF file with pages that contain links. I directed the linked files to open up in a new window. The linked files open in a new window on my hard drive but when I uploaded the pdf file and the links folder to our intranet at work, the links work but the files do not open in a new window. They open in the same window. Please help.
Thanks
Jeff

Hello Eric,
Thanks for the prompt reply and suggestion.
Unfortunately command - option/alt - click doesn't do it either.

Command click to open new window not working

Command clicking my favorites in Safari does not open them in a new window.
"Command + Click opens a link in a new tab" is checked under "Tabs" in the preferences plane.
MacBook Pro (17-inch)
OS X (10.10.2)
Safari (Version 8.0.4)
Any help would be appreciated.

Hello Eric,
Thanks for the prompt reply and suggestion.
Unfortunately command - option/alt - click doesn't do it either.

Hotmail opens new window not new tab

I have used firefox for a long time and had no problems. Now, all of a sudden when I open my bookmarks or hotmail they open a new window and not a tab. I never changed anything to make this happen it just started happening. I turned my computer on and restarted it but it didn't help. I already tried different things and then I went on firefox support and I read my problem on the forum and what I should do about it. (I have a mac) Someone said to go to about:config and then go to browser.link.open_newwindow and chage it to 3 but when I typed in about:config it says warning this could void your warranty do not go here unless you know what you're doing! Needless to say, I got scared and stopped!!

You posted with an old and no longer supported Firefox 3.0.6 version.
You should update to a more recent Firefox 3.6.6 (or 3.5.10) version.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.
See:
* http://kb.mozillazine.org/browser.link.open_newwindow (3)
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)

Firefox opens new window not tab

Firefox opens a new window rather then tab from any other process calling firefox. Example screen grab utility needs to load a new url. FF opens a new instance of firefox. It use to open a new tab.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

JavaScript to Open New Window Not Working

I am trying to program a button to open a pop-up window. I
have read several of the previous posts regarding this problem
(seems to be pretty common), and have tried the resolutions, but
still no luck. My button (despite the code) simply just advances to
the next screen. For the button, I have programmed it so it
launches the following JavaScript code:
javascript: openNewWin();
In the standard.js file I have copied the following code per
a previous post:
function openNewWin()
var o = window.open('CDMTS Course Map.htm','Course
Map','left=0, top=0, width=1280, height=800, titlebar=no,
menubar=no, toolbar=no, location=no, directories=no, resizable=yes,
scrollbars=yes, status=no');
o.focus();
In the post that I received this direction, it mentioned
something about putting this code in the Publish folder of
captivate. I'm not 100% sure that I've placed it in the right one,
but I think so.
Can anyone help me with this problem? It seems like such an
easy thing to do!
Thanks,
Kristi

Hello Eric,
Thanks for the prompt reply and suggestion.
Unfortunately command - option/alt - click doesn't do it either.

Opening PopUp window not displaying 1st view in background

Hello,
I developed WDA with Tree UI element. now on click of childnode (UI elemment TreeItemType), i am opening window. below is the code that i put in method.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
                     window_name            = 'W_JOBCODE'
                     title                  = l_string
                 close_in_any_case      = abap_true
                     message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                 close_button           = abap_true
                     button_kind            = if_wd_window=>co_buttons_close
                     message_type           = if_wd_window=>co_msg_type_none
                     default_button         = if_wd_window=>co_button_close
l_api = wd_this->wd_get_api( ).
lo_window->set_window_position( position = if_wd_window=>co_center ).
lo_window->set_window_size( width = '900px' height = '900px' ).
lo_window->open( ).
also i embeded view V_JOBCODE inside window W_JOBCODE.
my requirement is that when this window gets opened, my earlier view should be displayed in background. Now when the window is getting opened, the ealier view is not displayed at all. earlier i developed another WDA where i am displaying window on click of URL to Action UI element and there i am able to see the 1st view in background. I checked all things but not sure why for my current WDA, i am not able to see 1st view in background.
Please let me know if anyone has any clue.
Regards,
Chandra

Hi Chandra,
Use the below code to open a new window in the same component.
data: str type string,
          l_window1 type ref to if_wd_window_manager,
          l_cmp_api type ref to if_wd_component,
          result1 type ref to if_wd_window.
    call method cl_wd_utilities=>construct_wd_url
    exporting
      application_name = 'Component Name'
      importing
      out_absolute_url = str.
    l_cmp_api = wd_comp_controller->wd_get_api( ).
    l_window1 = l_cmp_api->get_window_manager( ).
    result1 = l_window1->create_external_window(
    url = str ).
    result1->open( ).
Regards,
Simi A M

Mail notifications in 10.9.2 open message window not Mail

Similar Messages

Maybe you are looking for