MAIL on my MAC does not load any new mail or delete any mail in any of my other folders

I've been having this problem for a couple of days now. Its as if MAIL just doesn't respond to anything. I can't get any New MAIL to load. And if i try to delete anything from SPAM, JUNK... and so on. They won't delete, they just show up again after deleting.
I restarted the computer, and checked all my settings as well. I also uodated the computer.
MAIL works from my iphone ans ipad. Just not MACBOOK PRO.
Any help is appreciated.
Jimmy

Drafts, ToDos (Notes), and Outbox are found normally in the Mailboxes folder but do not usually appear in the On My Mac section. As for Deleted Messages that may be a remnant from before you used an IMAP account or if you at one time configured Mailbox Behaviors in Mail preferences to keep deleted messages locally instead of on the IMAP server.

Similar Messages

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

Firefox does not load any websites now, after working well earlier today.

Firefox is not working now - it does not load any websites. Message on screen says:- "8e6 Mobile Client - internet browsing is not possible at this time. Error:80001001".
What I was doing before the problem:-
I had spent time re-organising My Documents.
One folder in My Docuamnts called "High Windows" contained the file "2101HighWin.msi", which I attempted to open.
What I have done since the Firefox problem:-
I have tried to uninstall 8e6 Mobile Client, but it won't let me.
I have uninstalled and re-installed Firefox.
I have used InternetExplorer8 to search thru the Mozilla troubleshooting pages.
Please can you help?
Cheers,
Bruce

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
Make sure that you regularly check if there are updates available for your plugins.<br />
See http://www.mozilla.com/plugincheck/
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.1 r53
# Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

FireFox does not load any website when setting up a working proxy

When i set a proxy for firefox , any proxy ... firefox does not load any thing , it comes with server not found in no time , fire fox is not even searching for it !

I read those before .. but my problem is not any one of them !
when i set proxy on firefox it does not work !
when i set proxy on IE then setting firefox to system proxy it work !!

Firefox does not load any webpages. Only shows "done" in corner. IE (64bit) works fine

The firefox program loads fine. However it only shows "untitled" in the tab and "done" in the bottom corner. It does not show any error notifications. When I click a bookmark, or enter a URL into the location bar it makes not attempt to contact the server. In fact it appears to do nothing at all.
I appreciate any help you can provide.

Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Firefox will not load any web page, other programs will. Continuously "connecting"

Firefox will not load any pages, but Google Chrome will. Firefox will 'load' the home page, but with any other site, the tab will continuously circle and say "connecting". I have tried clearing my cache, starting in safe mode, and restarting my computer. So far, nothing is working.

Update..when I open firefox from scratch, the main firefox pages on the home page seem to work. But as soon as I try to go anywhere else, IE going to a website in the address bar or even trying to access the defauly bookmark links, it just sits there loading but never brings anything up.

Mac Does not load so I can't reach desktop

Mac Book Air
I do not understand why it does not work. The whole scenario pretty much laid out this way: I go press the power button, the little circle shows up and revolves around for a solid ten minutes. It keeps loading and it simply does not reach the desktop. I also charged and it still doesnt work. I have to hold down the power button just to close it because it keeps loading on the opening sequence and I can't reach the desktop! What can I do to fix this?? Please help.

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

I just bought an airport express and I am in the process of configuring but my mac does not detect any airport devise. internet is working wirelessly and the airport is plugged next to the mac. any clue how can I fix this?

I just bought an airport express but when trying to configure it my mac is not capable of detecting the devise. The airport is plugged right next to the modem and the wireless internet is running perfectly. does any one experience this before?

You don't mention what function you want the AirPort Express to accomplish.
If you are trying to configure it to "join" your existing wireless network, you need to know the exact type of security that your wireless network is using fo you can use that same information to provide the correct settings to the AirPort Express.
You may be getting a message that the settings have been stored successfully, but unfortunately the settings that you have provided to the Express are likely the wrong settings.
The only way that you really know if the settings that you entered were correct is if you get a green light 20-30 seconds after you click Update. If you don't get a green light on the Express, the settings that you provided were not the correct settings.
When you click Update, the Express will "disappear". This is normal. Up until the time that you click update, AirPort Utility is communicating to the Express on a wireless network with a name like Apple Network xxxxxxx. As soon as you click Update, the Express switches (or tries to switch) to another network, so of course it will disappear from the AirPort Utility window.
As soon as you click Update, close AirPort Utility. There is no reason to keep watching a window when the Express will never appear.

Blackberry Desktop Manager for Mac does not recognize any Calendars for syncing

ive installed the blackberry desktop manager for my Macbook and hooked my phone up through the USB port when I started the program and when I go to the calendar section it says "There are no calendars available on this computer for syncing. Please launch a new iCal and create a new calendar". How do I fix this? I have a lot of information on my iCal that I want transferred over to my phone, but it won't recognize the calendar in the program. Help

I'll try to help...first you did not provide any pertinent information for troubleshooting: Mac OS, device, device OS...
Now before you do anything go to iCal>File>Export and create an iCal archive (JIC). The rest is dependent on the OS (as each store iCal data differently)...It is possible that your calendar file is not where it should be. Try cleaning system and user cache. Restarting your mac and repair permissions.
On the device side, what do you have as the default CICAL? You could try forget device in the DM or trash the user>username>application support>BlackBerryDesktop folder and start over.
Now do you have more than one calendar? In the DM how are you setting the sync? Two Way, All Calendars...to what calendar are you adding on the device? Under Advanced Settings are you selecting All events and are you Replacing all calendar events on the Blackberry device? Remember that even if you have multiple calendars in iCal they will sync as one in the BlackBerry.
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL

WSE2012R2 Dashboard Stoage Tab Does Not Show ANY Hard Drives or Folders

I have been using WSE2012 for nearly two years as a "home" server. I recently decided to upgrade to R2. After spending several days trying to "migrate" to R2 without any success, I finally did a fresh install to my original system drive
(a 240Gb Samsung 840 Evo SSD). The install went well until I checked all of my data drives (4x2Tb, 2x1Tb, 1x3Tb and a 2Tb "storage spaces" drive). I found that only three of the drives were online and useable. The "storage spaces" drives
were not even visible in Disk Manager and all of the other drives were "offline". After doing a lot of searching with Google, I finally figured out how to make the "offline" drives "Online" with PowerShell. With much more searching,
I also finally figured out how to "bring back" the "storage spaces" drives with about four lines of PowerShell code so I thought I was finally home free... But no such luck. I then had a lot of trouble restoring my "ServerFolders"
although everything else seemed to be working. I also had rebooted several times while working on these things without any issues. After finishing up yesterday, I planning to finish working on the "ServerFolders" earlier today.
I ran into a problem right away, however, when I opened the Dashboard and went to the Storage tab only to find that NONE of the Hard Drives and "Server Folders" showed up. I had an alert that the "Server Storage Service" was
NOT running. I checked and found it to be "stopped" and in "manual" mode. After starting the service, the Storage Tab showed that it was being refreshed. After a lengthy wait, it never did refresh and the "Server Folders" item
on the Home Tab showed "N/A". I tried rebooting again. When the server came up, I checked the service again and found it to be running (although it was still on "manual")... But once again, Storage Tab never did refresh properly and still
showed nothing. This time I changed the service to "Auto" and also tried "Restarting" the service, to no avail. I rebooted again. This time, when it came back up, I first checked the service again and it was running and still on "Auto".
Before opening the Dashboard, I checked the "Files and Storage" section in "Server Manager" and everything looked good. All of my hard drives and my "storage spaces" drive appeared with no apparent issues so I thought that everything
was finally OK... Wrong!!!!! I opened the Dashboard and went back to the Storage Tab only to find that it still would NOT refresh so that NONE of my hard drives or folders were showing. I am totally lost at the moment. How can everything actually be there
and okay but NOT appear in the Dashboard which, by the way, was working fine yesterday -- and I did not make any changes whatsoever between yesterday and starting to work on the system today. I am totally lost. Can anyone please help me resolve this
issue?????
Denis W. Repke

PROBLEM SOLVED. As I was just getting ready to "bite-the-bullet" and reinstall 2012 R2, I discovered something that led me to the solution. When I was previously trying to restart the Windows Storage Service, I "thought" it was restarting
okay. I was restarting it by right-clicking on the service. When I "started" it this way without opening up the service properties, it would immediately change from "stopped" to "running". What I did not realize was that the service
was quickly stopping "without" refreshing the screen so that "running" was still displayed even though the service had stopped. Once I realized that the service was not actually restarting, I tried another Google search based on this fact
which led me to some forum threads that helped me solve the problem since I found others with essentially the same problem. I found two corrupted registry keys under Windows Server\Storage Services. One of the keys was a major entry, the other was in the "Folders"
subfolder. After deleting BOTH keys, the service restarted without any issues and my drives and folders reappeared in the dashboard. A reboot was "not" required. What a pain! But everything is good now.
Denis W. Repke

Snoop does not show any network traffic other than own machine

Does anyone know of a way to troubleshoot a 3COM 3C900-Combo card? I reinstalled the card which lets the snoop command show activity of the machine but the card does no send or recieve (ping) any other machines onm the network. The IP and subnet are correct and the ifconfig - a shows the card as "up". Any help would be appreciated. I sur ewould like to get Solaris machine on my NT network.

Hi,
Please verify if in the BIOS the settings of "PNP OS" is set to FALSE, instead of TRUE. This may help fix the problem.
If this does not resolve the problem can you please enclose a snipped output of the dmesg related to elxl0 and "ifconfig -a" output. Please confirm the sub net mask is set right. Cat /etc/netmasks to confirm.
Hope the above helps.
Thanks
Sujeet

Ipod does not load any songs from itunes and freezes alot!!!!

I plug in my ipod and itunes opens and says that it is updating but nothing happens. I downloaded itunes 6 again, and then tries updating the ipod again and it said that it is updated. When i try to load music sometimes switching between disck mode an regular helps, but it isn't doing a thing now. I don't know what to do. PLS HELP!!!!

yea i guess that could be possable. i guess with 16,000 songs and only 13 did not transfer to ipod i should be happy but this is mac not windows so i would like to think the soft ware would work without flaws.. as for all my dupes i put over 1500 cds in my itunes library. a lot of the cds were various artists etc. that is y i have so many dupes. my imac has a 500g hard drive so i have plenty of space left on my hard drive. i have 2 external hard drives where my music is backed up.i have a 1terrabit lacie that i just use for time machine and a 500g lacie to back up my music and other stuff. iwould never trust my music to be backed up on only 1 external hard drive. if it died my music would be gone forever. thats y i use 2 external hard drives

Firefox 5 crashes and session restore does not load any tabs that were previously open.

Also, if I exit Firefox 5 it no longer asks to confirm that I wish to close multiple tabs - even though that option is checked in the options folder. Have changed various settings in about:config but to no avail. Any ideas gratefully received...

Which prefs did you change?
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

New safari update (5.1.2) for windows does not load any webpage. i can open safari but nothing happens.

why wont it load?

Try this:
Bring up the Windows Task Manager.
Look for a process called: "WebKit2WebProcess.exe" and there may be a *32 after the name.
Now Look for a "Safari" process, there may be multiple instances, but the primary instance will be identified by the significantly more memory that it uses.
Kill both processes.
The Kill order may be important.
If the WebKit process is running alone kill that first, and try to relaunch Safari.
If a Safari process(s) is running, Kill the primary instance, The WebKit process should also go away but if not Kill WebKit too.
It may take more that one launch attempt to clear the memory.
Further,, you will likely have to do this at each Safari launch because these processes become unstable after short use - until Apple fixes this bug.
-Alan
Ps: I have no issues what so ever on Lion, just Windows 7

Firefox does not load any sites the first time, including Firefox itself, other browsers do.

In the last few days I have experienced a problem logging on to nearly every site the first time. I get the message that the connection was reset....we have 3 identical computers in our home and I am the only one experiencing this problem. I can immediately try again and log on, but it is annoying to get that message with all sites, including Firefox itself, I have tried to clean out my cache and my cookies, but the problem persists.
Also, firefox is locking up my computer frequently. As it is as I attempt to send this message. I will copy and past this into another message as soon as I restart my computer.

Hi cor-el,
Yes the problem has reappeared, so I tried bypassing the cache for my Windows computer as you suggested: Hold down the Shift key and left-click the Reload button, or "Ctrl + Shift + R" (Windows) I then clicked on my bookmark (http://mdotnetpublic.state.mi.us/drive/ ) and I still see a blank screen and a spinning wheel. This seems to go on indefinitely. But like before I posted the question, when I click the reload button it forces the page to load right away.
[running Firefox 32]
I appreciate your quick responses, and look forward to more suggestions. I'll also search the support pages for information about my problem.
Thank you.
Mbr9743

MAIL on my MAC does not load any new mail or delete any mail in any of my other folders

Similar Messages

Maybe you are looking for