Mail opens in new window, must close window to get to next msg unable to arrow down to next msg?
mail opens in new window, must close window to get to next msg, unable to arrow down to next msg, help?
from my son, in mail version 4.5,
In the "classic layout", at the bottom of your email list, there should be a thin gray bar with a little gray dot in the center. Hover over that spot until the cursor turns into the "bar arrow" and drag it upward. You messages should appear below like the second screenshot. Alternatively, if you are using the newer version of Mac Mail, you could change your Preferences> Viewing to the "new layout".
Similar Messages
-
Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
If that's not what you see, post the contents of the window. -
When I minimize a window in INDD and then open a new file, my minimized window pops back up. How do I keep it minimized?
amandaecarroll wrote:
How do I keep it minimized?
Actually, I suspect you can't. You get various behaviors based on a combination of settings in Preferences > Interface; namely Open Documents as Tabs and Enable Floating Document Window Docking; but it doesn't seem to make much sense as far as I can tell. Throw in the additional "application frame" wildcard on a Mac, and even just exploring the effects of the settings and drawing conclusions about them gets tricky. It sounds like you've got your windows floating, whereas I suspect many if not most users have opted for the more structured and seemingly more logical tabbed/docked method, in which case they haven't encountered your issue and don't really understand it. One might ask; if your new/current document is "in front" then what difference does it make if others behind it are minimized, maximized, or something in between? -
Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab.
Type '''about:preferences'''<enter> in the address bar.
Select '''General.''' Look for '''Tabs.'''
Turn on '''When I open a link in a new tab, switch to it immediately''' -
Firefox is adding advertising links to certain words on my website cornish-surfing.co.uk, and when I open a new tab an additional window opens with unwanted sites.
1. How can I stop these things from happening?
2. Why is it happening?
These things only happen when I’m using the Firefox browser. I use Sophos antivirus and firewall and the scans indicate my system is clean. So I’m assuming that it’s built into Firefox or there’s a security flaw with Firefox.
Can you let me know which and how I can stop it from happening?
Graham Jappéhello, this sounds like a problem possibly caused by adware on your pc (certainly nothing that is shipping with a plain official firefox build).
please go to ''firefox > addons > extensions'' & remove any suspicious entries (toolbars, things that you have not installed intentionally, don't know what purpose they serve, etc). also go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[Troubleshoot Firefox issues caused by malware]] -
ok, so ever since I downloaded the newer version of Firefox my tabs icon (+) on the top is gone. I know I can hit cntrl T, but I really like just clicking the + which opens a new tab. How do I get that back?? I've looked around the HELP section and can only find info about what tabs are etc... Even in all the picutres about the feature it shows the + icon at the top of the page to open a new one. What do I do??
NM, got it fixed. Thanks!!!
-
Clicking link in mail opens a new tab, not a new window
When clicking on a link in AppleMail, after a recent update, opens a tab in a random window or perhaps the top window in Safari. Until this update, clicking on the link used to open a new window. This is driving me nuts. I am getting links from mail opening in a new tab in Safari windows I reserve for specific topics, or uses. I do not want unrelated mail links opening and interfering with work in these existing browser windows. Also, when I see the link from mail is not wanted, I too often close the window like I usually do, but now inadvertently close a Safari window with multiple tabs of important information, that I have trouble recreating. Where did this come from!? How do I change it so a new window opens?
I was having the same problem and finally figured out how to change this bahavior. Go to Safari preferences under the 'Tabs' settings. Make sure the field "Open pages in tabs instead of windows" is set to NEVER. That should do the trick.
-
Everytime I open a new tab, the firefox window gets smaller and smaller.
Every since I updated my Firefox, I have had issues. I love firefox so I would like to have this fixed please :) Well, everytime I open a new window or tab, the Firefox window gets smaller. Kind of like I hit the button by the close screen button. I have to actually hit that button to minimize the screen and hit it again to maximize it. It is sort of annoying. Is there something I can do?
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Occasionally when opening a new tab, all tab windows turn blue an images are lost.
Occasionally, when I open a new Tab the new Tab is entirely blue and all other previously opened Tabs are now blue . . . to continue, I must open a new window.
Yes it was an add on called net assistant by freeze.com and I have found that, disabled it and intend to uninstall it, it must of come in with something else, I did not down load it specifically. Thanks
-
Hyperlinks won't open in new browser tab or window
How do I get hyperlinks to open in new window? "Open in new window" box is checked under hyperlinks, but it just won't work. I'm previewing in a browser, not Muse (Chrome and Safari).
Hi Pblossom,
Can you please send your .muse file to [email protected], along with a link to this thread? If your file is too big for email (larger than 20mb) you can use a service like Adobe SendNow or SendThisFile.
Regards,
Aish -
Can no longer open a new tab for one window browsing
I used to be able to open a new tab without having to open a new firefox window. I can no longer do this. My Firefox version is:
3.6.73Start Firefox in [[Safe Mode]] to check if one of the add-ons (Ask.com toolbar) is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Links not opening as new tabs in Safari window
I have set my Safari preferences so that when I click a link, it should open a new tab in the current window yet it never works. A clicked URL brings up a new window and I'm constantly merging all the windows into one.
Any ideas why this preference might not be holding?
Thanks!Unless this occurs for every link you click, the problem is due to the fact that some links are coded in the HTML to open in new windows. In Safari, those links will open in a new window no matter what you do. Only links that are coded to open normally (i.e. in the same window) will open in a new tab when Command-clicked. In other words, Safari is just not set up to override how a link is coded, as Firefox and some other browsers are. Safari honors the "new window" HTML.
There is a way to get around this without using third-party software. It requires using Terminal to change Safari's default behavior. It's a very simple change, essentially just toggling a hidden setting to the "on" position, and shouldn't cause any problems as some "hacks" can do.
To do this, simply open Terminal (in the Applications/Utilities folder) and paste the following command:
defaults write com.apple.Safari TargetedClicksCreateTabs -bool true
And hit the Return key. Quit and relaunch Safari.
If you want to reverse this change, enter the following command in Terminal:
defaults write com.apple.Safari TargetedClicksCreateTabs -bool false
And then the Return key.
Message was edited by: Rachel R -
I'm unable to open a new tab on my window, what do I do?
I installed mozilla firefox 17.0.1 since then I'm unable to open a new tab when i click on the + icon on the right of the other tab.
You can also try to update to Firefox 18.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version
Another possible cause to consider is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Can I restore a previous session after I open a new page and close it again afterwards?
I recently lost all of my opened tabs and windows. I had 7 pages open with multiple tabs in each window. Windows did an update and shut down my computer without me realizing. When I went on to my computer, without thinking I opened a new window and didn't restore the session, not realizing it wasn't there anymore. Then my computer shut down unexpectedly. Now when I go on the computer, it won't show my previous browsing session. The restore previous session is grayed out, and now that I opened another window to try to figure it out, there is nothing to restore. Is there any way to get a browsing session back from the past? Not the most previous browsing session, but a browsing session from 2 before that??? I am devastated because of all the research I've done in the past 6 months is gone. It will be so hard to figure it all out by searching through my history since it was 6 months of browsing. Not to mention too time consuming to do it that way since there were a few hundred tabs that I lost! Please help me!! I keep thinking that there has to be a way...It's really stressing me out and I just can't accept that it is all gone! I'm not an expert on computers, so I hope to get an explanation that I understand...I would be so grateful if someone can help me!! Thanks!!
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
When I open a new tab, I cannot view it, the tab closes automatically. I then reload the tab and it closes again after 3 seconds. How can I stop this? I never had this problem before.
== This happened ==
Every time Firefox opened
== About two weeks ago, 2nd week in June 2010Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Maybe you are looking for
-
Logs are not getting applied in the standby database
Hello, I have created a physical standby database and in it the logs are not getting applied.. following is an extract of the standby alert log Wed Sep 05 07:53:59 2012 Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc Error o
-
Dynamic Side menu question!
Hi All Can someone help me with a menu issue I have, basically the problem seems very simple. All I want to do is specify that when a specific 'Entry Point' item is selected the dynamic menu is closed when the page is viewed. The reason for this is t
-
Can't change new song settings/names/anything
I've recently put some new songs into itunes from different CDs. As opposed to the other songs I have on there, I can't change anything about the songs - the names, artists, can't change the volume settings (which is the biggest hassle). what's going
-
Disable the multiple Logons in ECC6 and allowing few users
Dear All, I need to disable the multiple Logons in ECC6 and allowing few users, can multilogin in system. I have seen that the parameter login/disable_multi_gui_login and login/multi_login_users can be set. But need to know did any once use in Ecc6 s
-
Onscreen font size for "spell check" and "font"
How do I increase the onscreen font size for "spell check" and "font"? I just tried to spell check a document and the font size was so small I can't see what it says. Also, when you click on 'font' to change it, I wish the list of fonts was larger so