Mail page gets blank results
I used to be able to use my iPad with great results in getting my email. Friday I logged in and went to my Yahoo mail page as usual. The result was a page with nothing on it-a blank page. I tried several times and even went to Yahoo.com and clicked on "mail" but got the same results. I set up my mail app info and that worked but I prefer to use the Safari app to do mail when away from home as I also use my Mac Book at times on some trips. BTW, when I returned home, I tried to use the iPad with my own wireless network here and got the same results. What is going on and how can I fix it? Thank you.
Sadly I looked and the remotes images was on. I toggled it off and then back on again and got the same blank page. Thanks for your ifno.
Similar Messages
-
I have my Yahoo Mail "poped" over to Apple Mail. I can recieve emails but I can't send them out. The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up? What do I do?
Your outgoing mail server is different than your incoming server. Usually the outgoing mail server will have smtp in it. I noticed yours said "cannot send message using the server mail.wavecable.com". That sounds like an incoming mail server. Try setting your outgoing mail server to smtp.wavecable.com
I hope that helps. -
Open e-mail only get blank page and header
open e-mail and only get blank page and headers please help
hi thanks for your reply no it's not all that was sent to us we have about 24 and only a few will open properly. i was told it could be something to do with aol pop. our outgoing mail server just says mail. and then our name.
-
This is on my desktop PC running Windows XP. Have used Firefox successfully for a couple of years. This problem was first noticed on 1/18/2012.
Logging off and logging back into AOL does not fix it. Closing and re-opening Firefox does not fix it. Shutting down and rebooting the PC does not fix it.
Thanks for any help/explanations.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
End users get blank result from VC model calling an R/3 BAPI.
Hello everyone.
We have build a VC model calling a Z*BAPI that we built in the R/3 backend. Everything works fine through DEV and QAS. However in our production environment when an end user attempts to run the VC application and search for a record they get a blank table result. However if one of our core support team users runs the application it returns the search result successfully.
There are no authorizations on the BAPI itself.
I have tried to trap a security trace (ST01) in PRD but have not been able to capture a security trace for a failed attempt. There is no dump (ST22) and nothing in the sys log to indicate a problem (SM21).
Can someone tell me or point me to where I can determine all the authorizations an end user needs in order to run a VC model using a R/3 BAPI?
We are running on EP 7.0 and ECC 6.0.
Thanks,
-JonHi Shay,
When you ask "Have you tried adding the user to the permission list?". Can you be more specific.
Are you talking about the medium level security zone permissions in System Administration -> Permissions -> Portal Permissions -> sap.com/NetWeaver.Portal/medium_safety
For the following objects in the medium_safety folder, assign End User permissions:
com.sap.vc.mmcompiler
com.sap.visualcomposer
com.sap.visualcomposer.portalconnector
If so we have set the permissions to the Authenticated User Group to be "none" and "end-user".
We have also assigned end user rights to the Everyone group to the following PCD folders...
Assign End User permissions to VC Role for the following content:
pcd:portal_content/templates/pages/portalpagetemplate
pcd:portal_content/templates/pages/wdProxyPage
pcd:portal_content/templates/layouts/fullWidth
pcd:portal_content/templates/iviews/wdProxyiView
It still does not work unless the person has content admin assigned. Is there any other permissions (ACLs, PCDs, security zones, etc.) that a person needs in order to use a VC model?
-Jon -
Export to pdf for thai characters get blank result.
Dear expert,
I have a problem, when export Sales Order that contain thai characters to PDF in SAP B1 2007A SP01 PL08, the page converted to pdf successfully for english characters, but not for Thai character. Thai characters did not display anything, just blank.
I did refer to note 339832 , and i guess this note is for R3 system, and I think for B1 also should use the same method when export to pdf.
So, anyone have any idea to enable Thai characters to export to pdf in SAP Business One?
Thanks in advance for any help.
Reagrds
MatDear Carin,
Actually the purpose I want to export to pdf is because to attach wiith email that send direct from SAP.
My scenario here is:
- Open one Sales Order
- then click on Email icon to send email with attachment (I want to attach the SO). But, when I check the pdf before send the SO as attachment, i find out that the Thai characters missing/blank (as JimM said it is limitation in SAP for pdf function currently).
- the email sent successfully, but only the SO attachment is not correct because of Thai characters missing.
As per your suggestion, yes I can print as pdf first, then manually attach to email, but this involve too many manual steps just to send one SO via email.
Any way, thanks to all of you for reply.
JimM, thanks for the info and I will try to proceed to SAP development team for future use.
Regards
Mat -
Yahoo mail page shows blank content when opened in fedora 12. the same opens in windows
I recently installed fedora core 12 on my lenovo ideapad s10-3 to dual boot with windows7. I connected to internet and opened yahoo mail. when i viewed a mail (any mail) it does not show any content. When I open the same mail in windows, I see the content. I am using Firefox browser in both operating systems.
antivirus was not a problem since there was not one installed. Firewall settings are fine. I did just finally resolve this issue. Spyhunter was able to detect a couple of hijackers that the other programs did not and this fixed the problem. As I stated in the original post I did suspect this was the issue. The lesson learned is to run multiple malware programs until you find one that eliminates the problem if you suspect malware as the problem.
-
RoboHelp10 - If we click on 'Show' link(button), blank page get displayed
I am using,
RoboHelp10
IE9
MSVS2010
Win7
Tried with below option,
Flash Help -> we are working with it and has problem for our desktop/standalone wcf application.
Flash Help Pro - > We know that RH server is req. for this option
Web Help Pro- > We know that RH server is req. for this option
Trouble in (Flash Help),
1. When we invoke Flash Help with respective topic ID, it will not show requested topic page along with TOC, it will show default topic/page, which we set at the time creating help. Also it will display "Allow Blocked Content" button at the bottom. If we click on "Allow Blocked Content" it will display the above requested topic page correctly, but without TOC pane. This time we can see 'Show' button(link) on the browser. If we click on 'Show', blank page get displayed.
2. When we are displaying content with option 'OptionConstants.CSH_DISPLAY_CONTEXT' it only show topic and it won't show me the TOC along with current selected topic page.
3. When we are displaying content with option 'OptionConstants.CSH_DISPLAY_CONTEXT' it only show topic with 'Show' link. When we click on 'Show' link, blank page get display.
4. Tool gives us facitlity to publish the Flash help, where we can choose the folder. This means that it publishes folder structure. We are using this folder structure (the published one) and on the top of that we are not getting expected(blank page get display) result.
5. Published content does not contain any mapid/mapfile, if so whow it works correctly with RH development studio.
6. Skin we were using 'beautiful_vista_flash.fhs'
7. We build RH after setting Mozilla as the statup browser. We tried with Mozilla and IE but still our application opens help in IE. So not able to test in Mozilla.
Please assist to resolve it.
Thanks in advance.Thank you for your input.
Working with "FlashHelp"
Our req is files pages are deployed along with desktop(WPF) application locally and not on webserver.
Referred following link,
http://blogs.msdn.com/b/ieinternals/archive/2012/06/20/loading-local-files-in-enhanced-pro tected-mode-in-internet-explorer-10.aspx
http://msdn.microsoft.com/en-us/library/ms537628%28v=vs.85%29.aspx
and added below one liner code,
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<!-- saved from url=(0014)about:internet -->
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
in each pages in the 'ProjectManager''s Project Files. And published the content of "FlashHelp".
Again the same problem("Allow Blocked Content" button apprears and blank page get displayed, as explained in option #1 of the first post) persist.
If i choose page and do viewsource then it will show blank line in place of <!-- saved from url=(0014)about:internet -->
Code is as given below,
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
We need to know that how to implement 'Mark of the Web' using RH development studio?
Your input are appreciated. -
Mail page on iPad is not responding is blank
While working normally,one day the mail page went blank and does not respond. Is there any easy solution to this problem?
Try closing the Mail app completely and then if it's okay when you re-open it : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I am a comp dummy, but I really like firefox but since I tried to personalize my firefox, all the time when I press a link or go to some less known site I get blank pages, while the adress is in the top showing. No wheels turning. Keep on burning, firefox!!!
Blocking too much, being too bossy, I do have great internet and pc security. In my own email account, you just prevent it from working! That's ridiculous.
Start the fire.
Greetings,
The wolve-like (that's what my last name means: Roelofs.
Robin Mark Roelofs,
The Netherlands
Pleae do something.'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
MY Mail app does not respond in anyway to anything. The icon shows I have over 300 emails but I have no access to them. When I tap on the Mail icon a blank white page comes up with the blue format lines. No emails, no inbox, nothing, not a single letter of the alphabet is there. Within a few seconds it blinks out and I see the icon and my home screen. Soon it just blinks out to black. I am left with the icon at the bottom center of the screen. I have no way to shut it down. I have no access to the emails (300) in my inbox. All that is happening is my memory is getting filled up with emails. I would appreciate any solution to this problem barring deleting my email set up in settings.
if I have to resort to that I will, in the meantime I am hoping for a different resolution. Thanks everyone, you are all amazing and greatly appreciated. Sincerely, Diane.Hey There Diane,
If I'm understanding your situation, you've got an iPad running iOS 6.1.3 and the Mail app is not working. I understand you don't want to remove and re-add your email account.
The first thing I would suggest is to make sure your iPad is backed up to iCloud or iTunes.
Do you have an iMAP or a POP email account? When you go online to your email service provider's website, are you able to access the 300 emails in your inbox?
Since the Mail app is part of your iOS operating system, upgrading that software to the latest version, which is 8.1.3 may resolve this issue.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
http://support.apple.com/en-us/HT201398
Try these steps if you have an unresponsive app on your iPhone, iPad, or iPod touch.
Restart the app
Close the app and open it again.Restart your device
Turn your device off and back on.Check for iOS and app updates
Make sure that you're using latest version of iOS.
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password.
You might need a Wi-Fi connection to update some apps.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update the iOS software on your iPhone, iPad, and iPod touch
Learn how to update your iOS device wirelessly or using iTunes.
iOS software updates introduce new features that let you do even more with your iPhone, iPad, or iPod touch. Be sure to keep your devices up to date so that you don't miss out on the latest features.Before you update
Back up your device to iCloud or iTunes.
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you have some free space, but not enough to update over the air, you can either update using iTunes or delete content manually from your device. Whether you use iTunes or update over the air, you'll have the same amount of free space on your device after you update.
Some iOS software updates aren't available as over-the-air updates. VPN or proxy connections might prevent your device from contacting the iOS update servers.Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Hope this helps ...
- Judy -
Search/Result page is incorrect, result page is blank
Hello,
I am designing a website for my work. Iam not very much familiar with coding and dont know what exactly is missing in the code.
The search page filters the search criteria and on clicking the submit button, redirects to the result page which should display only the rows containing the search criteria. However, it is displaying blank in the result page with only the column names of the queried table (in the recordset)
The search page code is :
<?php require_once('Connections/connect.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$colname_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$colname_Recordset1 = $_GET['Class'];
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$colname_Recordset1 = "-1";
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$totalRows_Recordset1 = $_GET['Class'];
$colname_Recordset1 = "-1";
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$totalRows_Recordset1 = $_GET['Class'];
$colname_Recordset1 = "-1";
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
mysql_select_db($database_connect, $connect);
$query_Recordset1 = "SELECT * FROM time_table";
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$totalRows_Recordset1 = $_GET['Class'];
$colname_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$colname_Recordset1 = $_GET['Class'];
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);$colname_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$colname_Recordset1 = $_GET['Class'];
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
$query_Recordset1 = "SELECT distinct `Class` FROM time_table";
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['Rid'])) {
$loginUsername=$_POST['Rid'];
$password=$_POST['textfield'];
$MM_fldUserAuthorization = "";
$MM_redirectLoginSuccess = "index_1 - Copy.php";
$MM_redirectLoginFailed = "login_2.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_connect, $connect);
$LoginRS__query=sprintf("SELECT reg_no, password FROM login_table WHERE reg_no=%s AND password=%s",
GetSQLValueString($loginUsername, "int"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $connect) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
$loginStrGroup = "";
if (PHP_VERSION >= 5.1) {session_regenerate_id(true);} else {session_regenerate_id();}
//declare two session variables and assign them
$_SESSION['MM_Username'] = $loginUsername;
$_SESSION['MM_UserGroup'] = $loginStrGroup;
if (isset($_SESSION['PrevUrl']) && false) {
$MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
header("Location: " . $MM_redirectLoginSuccess );
else {
header("Location: ". $MM_redirectLoginFailed );
?>
<!doctype html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>TIME TABLE</title>
<link rel="stylesheet" href="styles.css" type="text/css" />
</head>
<body onsubmit= "registerEvents()">
<form name="form1" method="POST" action="<?php echo $loginFormAction; ?>">
</form>
<img class="header-image" src="images/logowhite.jpg" style="float: left" />
<header>
<h1><a href="/">CHRIST PRE-UNIVERSITY<span>E-SCHOOL</span></a></h1>
<h2>EXCELLENCE IS ALL THAT MATTERS</h2>
</header>
<div id="body">
<form name="form2" method="get" action="time.php">
<p align="center">
<strong>
<label for="Rid">
<br>
</label>
<label for="Rid"><br>
</label>
<label for="sid">Class</label>
<select name="sid" id="sid">
<?php
do {
?>
<option value="<?php echo $row_Recordset1['Class']?>"<?php if (!(strcmp($row_Recordset1['Class'], ucwords($row_Recordset1['Class'])))) {echo "selected=\"selected\"";} ?>><?php echo $row_Recordset1['Class']?></option>
<?php
} while ($row_Recordset1 = mysql_fetch_assoc($Recordset1));
$rows = mysql_num_rows($Recordset1);
if($rows > 0) {
mysql_data_seek($Recordset1, 0);
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
?>
</select>
<label for="Rid"><br>
</label>
</strong></p>
<p align="center">
<input name="Submit" type="submit" class="formbutton" id="Submit" value="Submit" >
</p>
</form>
<section id="content">
<article></article>
</section>
</div>
</body>
</html>
<?php
mysql_free_result($Recordset1);
?>
The result page code is:
<?php require_once('Connections/connect.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
}if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$maxRows_Recordset1 = 10;
$pageNum_Recordset1 = 0;
if (isset($_GET['pageNum_Recordset1'])) {
$pageNum_Recordset1 = $_GET['pageNum_Recordset1'];
$startRow_Recordset1 = $pageNum_Recordset1 * $maxRows_Recordset1;
$colname_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$colname_Recordset1 = $_GET['Class'];
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$query_limit_Recordset1 = sprintf("%s LIMIT %d, %d", $query_Recordset1, $startRow_Recordset1, $maxRows_Recordset1);
$Recordset1 = mysql_query($query_limit_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
if (isset($_GET['totalRows_Recordset1'])) {
$totalRows_Recordset1 = $_GET['totalRows_Recordset1'];
} else {
$all_Recordset1 = mysql_query($query_Recordset1);
$totalRows_Recordset1 = mysql_num_rows($all_Recordset1);
$totalPages_Recordset1 = ceil($totalRows_Recordset1/$maxRows_Recordset1)-1;
$colname_Recordset1 = "-1";
if (isset($_GET['Class'])) {
$colname_Recordset1 = $_GET['Class'];
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
?>
<!doctype html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>TIME TABLE FOR CLASS</title>
<link rel="stylesheet" href="styles.css" type="text/css" />
</head>
<body bgcolor="#CCFF99">
<div>
<img src="images/logowhite.jpg" width="274" height="103" class="header-image" style="float: left" />
</div>
<header>
<h1 align="left"><a href="/"> SCHOOL TIME-TABLE FOR <span> THE CLASS </span></a></h1>
</header>
</div>
<div align="center">
</div>
<p align="center"> </p>
<p align="center"> </p>
<div align="center">
<p align="center"> </p>
<table border="5" cellpadding="15" cellspacing="15">
<tr>
<td>Class</td>
<td>Day</td>
<td>1st</td>
<td>2nd</td>
<td>3rd</td>
<td>4th</td>
<td>Room No</td>
</tr>
<?php do { ?>
<tr>
<td><?php echo $row_Recordset1['Class']; ?></td>
<td><?php echo $row_Recordset1['Day']; ?></td>
<td><?php echo $row_Recordset1['1st']; ?></td>
<td><?php echo $row_Recordset1['2nd']; ?></td>
<td><?php echo $row_Recordset1['3rd']; ?></td>
<td><?php echo $row_Recordset1['4th']; ?></td>
<td><?php echo $row_Recordset1['Room No']; ?></td>
</tr>
<?php } while ($row_Recordset1 = mysql_fetch_assoc($Recordset1)); ?>
</table>
</body>
</html>
<?php
mysql_free_result($Recordset1);
?>
Please help me out.
ThanksThanks for your help,
I have created both the pages again, one is a search.php another is result.php
search.php is only used for accepting a text field which is the input of the search in database table on click of the button, and the result of the search is to be displayed in a dynamic table in result.php.
The result field again uses a GET variable named 'Class Name', from the form field in search.php. But again, my result Page displays blank except the column names of the table. Please advice.
search.php
<?php require_once('Connections/connect.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
?>
<!doctype html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title></title>
<link rel="stylesheet" href="styles.css" type="text/css" />
</head>
<body>
<div>
<img src="images/logowhite.jpg" width="274" height="103" class="header-image" style="float: left" />
</div>
<header>
<h1 align="left"><a href="/"> TIME TABLE FOR<span> CLASS </span></a></h1>
</header>
</div>
<div align="center">
</div>
<form name="form1" method="get" action="result.php">
<p><label>Class Name</label>
<input name="Class Name" type="text" value="" size="15" maxlength="20">
</p>
<p>
<input type="submit" name="bid" id="bid" value="Search">
</p>
</form>
<p align="center"> </p>
</body>
</html>
result.php
<?php require_once('Connections/connect.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$maxRows_Recordset1 = 10;
$pageNum_Recordset1 = 0;
if (isset($_GET['pageNum_Recordset1'])) {
$pageNum_Recordset1 = $_GET['pageNum_Recordset1'];
$startRow_Recordset1 = $pageNum_Recordset1 * $maxRows_Recordset1;
$colname_Recordset1 = "-1";
if (isset($_GET['Class Name'])) {
$colname_Recordset1 = $_GET['Class Name'];
mysql_select_db($database_connect, $connect);
$query_Recordset1 = sprintf("SELECT * FROM time_table WHERE `Class` LIKE %s ORDER BY `Class` ASC", GetSQLValueString("%" . $colname_Recordset1 . "%", "text"));
$query_limit_Recordset1 = sprintf("%s LIMIT %d, %d", $query_Recordset1, $startRow_Recordset1, $maxRows_Recordset1);
$Recordset1 = mysql_query($query_limit_Recordset1, $connect) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
if (isset($_GET['totalRows_Recordset1'])) {
$totalRows_Recordset1 = $_GET['totalRows_Recordset1'];
} else {
$all_Recordset1 = mysql_query($query_Recordset1);
$totalRows_Recordset1 = mysql_num_rows($all_Recordset1);
$totalPages_Recordset1 = ceil($totalRows_Recordset1/$maxRows_Recordset1)-1;
?>
<!doctype html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title></title>
<link rel="stylesheet" href="styles.css" type="text/css" />
</head>
<body>
<div>
<img src="images/logowhite.jpg" width="274" height="103" class="header-image" style="float: left" />
</div>
<header>
<h1 align="left"><a href="/"> TIME TABLE SEARCH RESULT FOR<span> CLASS </span></a></h1>
</header>
</div>
<div align="center">
<table border="5">
<tr>
<td>Class</td>
<td>Day</td>
<td>1st</td>
<td>2nd</td>
<td>3rd</td>
<td>4th</td>
<td>Room No</td>
</tr>
<?php do { ?>
<tr>
<td><?php echo $row_Recordset1['Class']; ?></td>
<td><?php echo $row_Recordset1['Day']; ?></td>
<td><?php echo $row_Recordset1['1st']; ?></td>
<td><?php echo $row_Recordset1['2nd']; ?></td>
<td><?php echo $row_Recordset1['3rd']; ?></td>
<td><?php echo $row_Recordset1['4th']; ?></td>
<td><?php echo $row_Recordset1['Room No']; ?></td>
</tr>
<?php } while ($row_Recordset1 = mysql_fetch_assoc($Recordset1)); ?>
</table>
<p align="center"> </p>
</body>
</html>
<?php
mysql_free_result($Recordset1);
?>
</body>
</html>
I followed these steps from adobe help.
Thanks. -
Why does a PDF file created in Pages, attached to e-mail, not get sent?
Why does a PDF file created in Pages, attached to e-mail, not get sent? I even blank copied myself and nothing seems to have been sent. Could it bee the size of the PDF file?
They send for me, my test document was 3.8 MB.
-
I need to figure out how to get the mail page to load properly in Firefox. Can anyone help?
I have been having to open Explorer to get my Yahoo mailMany site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
When printing a web page, I only get blank pages
I have a new iMac with MAC OS 10.4.11. I connected an HP psc 2175xi all-in-one printer, and when I try to print a web page from Safari, I only get a very small portion of the header and all other pages are blank. When looking at the Print Preview, every thing looks like it has printed fine, but when it is sent to the printer only blank pages come out. I am able to print from other applications fine. It seems to be related to printing web pages only, because I have also tried to print using Firefox, but the same problem occurs. Can anyone please help?
Thanks.I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.
Maybe you are looking for
-
My iPad mini won't connect to wifi. Well it does but very sporadically.
-
I have downloaded a concert quite legally and can see it in downloads folder but how do I get to play the concert? Thanks John
-
Convert numeric values in colomn into names
Hi experts, Here's the situation (probably very easy to solve but could only sort it out for month's, date's etc); Colomn name: Gender Values: 0 (=female), 1 (=male) I want to convert these 0 and 1 into a new colomn with the genders in names instead
-
Input Date display and submit formats
I need to insert Timestamp into the Oracle database table field. My particular EO attribute is of type "Timestamp", so that I can insert the Date with time. Also in the control hints format is "dd/MM/yyyy hh:mm:ss a" The problem is that I just need t
-
I am making a movie on my ipad using iMovie, need help with music.
I have a song that I put into my itunes library and then uploaded it into a dropbox folder. I have dropbox on all my apple products. Anyway, I would like to use this song in my imovie project. How do I get it into imovie from dropbox. It is a an