Mail - picture signature will not change

I'v changed my "picture signature" (the picture that appears at the top of emails)by going to my account at .Mac - mail/preferences/photo then saved it etc.
Now - if I send an email from the .Mac page it shows the new photo, but when I send an email from my Mail account on my computer it still shows the old one.
I've found these instructions about deleting a file:-
"Drag the file named "<username>@mac.com" to the Trash. It is located in this path: o ~/Library/Caches/com.apple.addressservices/Photos/<username>@mac.com "
But these instructions are for whatever OS was around in 2003 and don't make sense now. Anybody know what to do ?

go to photo booth and replace your account photo.

Similar Messages

Mail notification (sound) will not change

I cannot seem to get the mail sound to change (on my iPhone5) from the sound I had on my 4s (backed up and reloaded through iCloud).
I have changed the sound in "settings" and regardless of that sound is chosen, the "News Flash" WILL.NOT.GO.AWAY
I even changed it to "None" and the "News Flash" sound still chimes.
Anyone have this issue?

Ok so the first things that you would need to determine are as follows: This is the best way to get this to test and see if it works for you.   First things first, set aside all the notes on configurations that you would need for 2 Accounts to configure with email. Prior to doing this, do the reset as listed above in the directions of this post's reply. Once you have it reset, then do the following steps:
1.   First , set the mail notification Sound by going to Settings > Sounds > Mail , and change this here to something other than default.
2. Add your first email account first to the phone using the Mail Accounts and do New. Once you have added the new account, just this first one, send a mail message to it from a PC/MAC and test to see if the sound is working other than the default meaning the sound you changed it to.
3. Once you have conifrmed that it's working this way, next you will need to do, is add the 2nd account to the phone, and test that you can get mail on it.
4. Now that you have both accoutns, you can go into Settings>Notifications>Mail>and you will see both accounts listed there .   For me it's : Exchange, LiveMail, Icloud in that order.   All of these are clickable with touch.
5 Touch one of them it will open the menu to allow you to change notifications including sounds.
CHANGE all 3 accounts sounds using step 4 listed and then after you have done this for each of them accounts, test by sending emails to them.
Let me know if you need help.
Thanks.
Beatzondek.

I have been hacked on hotmail, and i try to change my password on mail and it will not change, it comes up grey not black so i cannot access it

basucaly what has happened is i went onto my laptop, changed my hotmail password, then now i cannot access it on my ipod i have been onto Settings-Mail,Contacts,Calender and the box where it says "hotmail" the writing is in grey so i cannot access the next stage, i dont know what next to do any help would be greatful!

Settings>General>Restrictions...are yours on? Allow Changes>Accounts>On/Off.

Having problems on my iPad with camera after downloading IOS7, will not change from picture to video setting

After I downloaded IOS7 on my iPad I saw that the camera had changed to video, picture or square.
It will only take a picture, I will not go to the other two settings. Any suggestions?

Its no problem. There are a lof of little things that will take time to discover and sometimes it just easier to ask
Glad I could help
-Steven

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

HT1926 Trying to download itunes update on my computer windows Xp... Tried 3 times and keep getting an error: invalid signature/will not be installed. HELP

iTunes is downloaded, been using it for years. I went to download an update and I keep getting an error.Error message is: invalid signature/will not install.
I did try to update manually as instructed however that also came with the same error.
If someone can advise it would be greatly appreciated.
So what is an invalid signature and how to fix it???

I would think the link doesn't work now as we are on version 10.7.
If you go to:
http://support.apple.com/downloads
the latest update for itunes is in the left hand column. If you follow the rest of the instructions from wiclee/fimeck it should work.
"Select "Save" instead of "Run". Once downloaded, right click the iTunesSetup.exe or iTunesSetup64.exe and select 'Run as Administrator' to install." (or use default)

I have two Apple ID's associated with my e-mail and Facetime will not verify the one I use. How can I eliminate the other ID?

I am running to into a problem using Facetime as I seem to have two Apple ID's attached to my e-mail. Facetime will not verify my e-mail address because it is associated with the other account. What can I do???

Some things are mixed up here, seemingly...
I seem to have two Apple ID's attached to my e-mail.
An Apple ID is a valid email address, apparently. How can those be "attached to your email"... what email?
Facetime will not verify my e-mail address because it is associated with the other account.
This doesn't make sense. You can register multiple, even non-Apple-ID, email addresses and their aliases with FaceTime.
So, maybe you can explain your problem better - what you want and the steps you've taken and what you have so far. If something doesn't work, please tell the exact error message, too.

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

Finder Icon will not change! Please help!

I have been customizing the look of of my dockbar on my imac by giving all of my apps new ios 7 style icons.
Yesterday I changed my Finder icon with no problem at all by going to:
System→Library→Core Services→(right click 'Dock'→Show Package Contents)→Contents→Resources.
And replacing the two png files (finder.png) and ([email protected]) with my new images. Yesterday I did this all perfectly fine and it changed to my new icon.
However today I found a better finder icon and decided to change it again to this new version. However what ever I try it will not change to this new icon.
I have followed the exact same steps as before, I have replaced my two png files from yesterday with my new ones and I have checked and re-checked that I am naming the files correctly, and that they are the right format etc.
I have even deleted my original icons that I changed it to yesterday and emptied them from the trash but it is still there even after restarting and shutting down and rebooting.
I have also tried going to terminal and typing 'killall Dock', it still returns with the same icon that I changed it to yesterday, even though I have deleted them from my hard drive.
Please help me this is so frustrating and have wasted many many hours on this.
(I am on mavericks btw)

(I am on mavericks btw)
iMac, OS X Mountain Lion (10.8.4)
Then, update your profile/product info. BTW, I have nothing for the icon problem.

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

External Hyperlinks Will Not Change after Publishing

Hi - I'm running the most up to date iWeb and trying to publish external hyperlinks that will not change no matter what I do. They do not overlap, there is no image blocking them, and I have checked and rechecked that they work on iWeb perfectly. I have tried saving each update individually with the inspector, publishing each update individually, re-entering each url then tab or enter - basically everthing suggested on these forums. The site is scullyfilm.com and the external links are to my pages on my squarespace site.
Any ideas?

It's very simple to do and it's virtually impossible to do it wrong.
Here's how I did it.
Went to Squarespace :
http://scullyfilm.squarespace.com/
Right-clicked a link and copied it :
In iWeb, selected a button and made it a hyperlink. iWeb automagically places the copied link in the URL field :
Repeated for other 3 links.
There's currently ONE hyperlink on your page (last updated 20140113) :
http://scullyfilm.com/scullyfilm/HOME.html
and it links to :
http://scullyfilm.com/casting/
which does not exist.

My Ipod touch will not change songs or shuffle

My I pod touch will not change or shuffle songs. Everything else seems to be working correctly. Any suggestions?

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
B-rock

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
I Turn it off/on and nothing changes.

Hello bigboza,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario

PDF, with electronic signature, will not save. In Finder it's nowhere, tried multiple times..

Started in Preview to save...but PDF, with electronic signature, will not save. In Finder it's nowhere, tried multiple times.

I am having the same problem with signatures. I am including a form in a pdf portfolio to collect signatures from different users who have Reader. I make sure that features have been extended for reader. Most of the time they are okay. But every once in a while (at least one every two weeks) I get a user telling me they can't sign. No message or error of any kind, just a quick blink but no signature. As a work-around I've had to save a copy and re-extend features. This can be time consuming when there are a few documents I need to circulate. Please advise.

Mail - picture signature will not change

Similar Messages

Maybe you are looking for