Mail policy not blocking attachment

I'm trialling an Ironport C160, and having problems with the content filter. I have an incoming content filter that is set to drop incoming attachments of type jpeg. However, the ironport just lets the attachment past.
The content filter is applied to the default incomping policy. I also tried setting it up as a separate policy with higher priority to default, but the attchment was still allowed through.
If I check the tracking, it says
MAIL POLICY "DEFAULT" MATCHED THESE RECIPIENTS: [email protected]
So it seems that it goes through the policy, but doesn't apply the content filter.
Any idea what I'm doing wrong?

MAIL POLICY "DEFAULT" MATCHED THESE RECIPIENTS: [email protected]
28 Dec 2011 15:36:17 (GMT)
Protocol SMTP interface Data1 (IP 192.168.1.17) on incoming connection (ICID 239) from sender IP 192.168.1.199. Reverse DNS host None verified no.
28 Dec 2011 15:36:17 (GMT)
(ICID 239) RELAY sender group RELAYLIST match 192.168.1. SBRS rfc1918
28 Dec 2011 15:36:17 (GMT)
Start message 271 on incoming connection (ICID 239).
28 Dec 2011 15:36:17 (GMT)
Message 271 enqueued on incoming connection (ICID 239) from [email protected]
28 Dec 2011 15:36:17 (GMT)
Message 271 on incoming connection (ICID 239) added recipient ([email protected]).
28 Dec 2011 15:36:17 (GMT)
Message 271 contains message ID header '<CAKFcXox=[email protected]>'.
28 Dec 2011 15:36:17 (GMT)
Message 271 original subject on injection: JP
28 Dec 2011 15:36:17 (GMT)
Message 271 (7685 bytes) from [email protected] ready.
28 Dec 2011 15:36:17 (GMT)
Message 271 matched per-recipient policy DEFAULT for outbound mail policies.
28 Dec 2011 15:36:17 (GMT)
Message 271 queued for delivery.
28 Dec 2011 15:36:17 (GMT)
SMTP delivery connection (DCID 254) opened from IronPort interface 192.168.1.17 to IP address 192.168.1.25 on port 25.
28 Dec 2011 15:36:17 (GMT)
(DCID 254) Delivery started for message 271 [email protected]
28 Dec 2011 15:36:17 (GMT)
(DCID 254) Delivery details: Message 271 sent to [email protected]
28 Dec 2011 15:36:17 (GMT)
Message 271 to [email protected] received remote SMTP response '2.6.0 <CAKFcXox=[email protected]> Queued mail for delivery'.

Similar Messages

Mail is not saving attachment and save as is not working

Suddenly my Mail is not saving attachment and save as is not working. I tried to save an email as I use to do but it is not completing the task. I should I do?
Thanks for any help,
Mario Lordeiro

Mario,
Was there also NO choice to View As Icon, in the contextual menu? If not, these items/images may be embedded in HTML, rather than true attachments. Other choices for normal attachments would include Open Attachment, Open With, Save to Downloads Folder -- are any of those present in the contextual menu?
With such a message open, click on View in the menubar, place the cursor on Message in the pull-down menu, and choose Raw Source. Is there any HTML code present? Is there a header immediately before any code representing what you believe is an attached file?
If need be, I can send you an email message with a known form of attachment.
Ernie

Software Restriction Policy not blocking MSI files

Hello, we have one SRP in place on our domain that includes MSI files in the Designated File Types, however it is not blocking users from running them. Has any one else had this issue? What are some things I should look out for? Thanks.

Hi Erin,
>>we have one SRP in place on our domain that includes MSI files in the Designated File Types, however it is not blocking users from running them.
Are these users standard user accounts (without administrative privileges) ? Besides, what SRP rule did we configure to disallow the .msi files? Here, we can run command
gpreport.html gpresult/h to collect group policy result report to check how group policy settings are applied. Note, to collect computer part group policy setting report, we need to run the command with administrative privileges.
In addition, to block .msi files, we can also use Applocker to do this. Regarding Applocker, the following article can be referred to for more information.
AppLocker Overview
https://technet.microsoft.com/en-us/library/hh831440.aspx
Understanding AppLocker Rules
https://technet.microsoft.com/en-us/library/dd759068.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I have HP vison with window 8 in my e mail can not open attachment

can not open attachment on my email

Hi,
Can you save them ? What are the file formats (after .) of the attachments. Depending the file formats, you need software to be able to open them (most of them are free).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Mail does not print attachment name & prints small

When printing an email, if it has an attachment, it does not print the attachment name. It prints the icon of the attachment (excel, word, psd, etc.) but it doesn't print the name of the file under it. This started happening since upgrading to Mavericks.
Also, emails are printing much smaller. Is there a way to enlarge the font when printing?

The same here and quite a lot of other Mail bugs - and all since the new MacPro and Mavericks, no such problems with Mavericks on the MacBookPro 2011 though
Sometimes the file names are printed, sometimes not and there is no way to find out why - it happens on and off with own mails to be sent and mails received.
Workaround for own mails is put each file underneath the other with some distance from the last word. Workaround in case of customer mails received go to reply, edit signature on top, reduce to one page and hope .... sometimes it works.
Also: on and off, Preview will show and printer will print only header on the first page, then body text on the second - only workaround to date (and believe me, I've tried everything) is use Reply, eliminate your own signature and reduce the printed area to less than a page
Also: long mails with back-and-forth messages may print a line half on one page and lower half on second one .... no workaround here.
Seems Mail is going to A4 US instead of A4 small (Europe), though this is not what the printer and the system or Word etc. are set to.
And a sneaking suspicion, that it works ok with people sending me mails from a Mac, but not from a Windows box ... can't bother all my customers though and ask
So please Apple - lots of people have the same problems - will you finally do something about it ... and yes I used the Feedback function
Suzanne

Remove Attachments from Leopard Mail does not remove attachment from .emix

Every day I back up my mail (and other items) to an external hard drive using an Automator workflow, in order that I can synchronize mail on my work and home Macs. In order to make this process as quick as possible, I routinely remove attachments from all mail messages once I have saved them to where they need to go on my hard drive.
I have noticed that since upgrading to Leopard (archive and install), the size of the mail folder which I back up (user>library>mail) is getting significantly bigger every day, despite removing all attachments. Upon investigation it seems that although the attachment has been removed from the mail message, the attachment is still in it's associated .emix file (e.g. user>library>mail>POP???mailaccountfolder>INBOX.mbox>messages>?????.emix - if this email contained a 5mb attachment which was removed using mail>message>remove attachments, the .emix file will still be 5mb).
Anyone else experiencing this problem? know a workaround? It didn't happen with mail in 10.4!

I am not sure when I will get the chance to test this -- maybe this afternoon. But I had not understood that what you called original continued to have the attachments. If so, this strongly suggests to me that it indeed may be the way Gmail maintains the All Mail folder that is causing this. See:
http://mail.google.com/support/bin/answer.py?hl=en&answer=6581
If there is a setting to help this, it will have to be one that is selected in the Settings webpage of Gmail, I suspect.
Ernie

Mail is not displaying attached jpeg iOS7

I believe I found an iOS7 bug. In my email, it shows my jpeg attachment (that I created). When I touch the file to display the image on my iphone 5, it just waits - never loading. I never had a problem displaying jpegs until I downloaded iOS7 tonight!!! I've had an iphone(s) for about 5 yrs. I strongly believe this is a bug since I tested this twice with two different jpeg images. Displaying a 69kb jpeg should not be a problem. But surprise, it is, after moving to iOS7. I'm a seasoned mac-only user (mac workstation, macbook pro, iPhone, Creative Suite 6, Photoshop). And a graphic designer. I can't believe this is happening.
I'm going to send png and gif files to further test this... but it's got to be a bug.
I also saw another fix needed. When installing iOS7, the itunes install progress bar was correct when it got to the end of the bar and showed installation was [100%] complete. On my iPhone, which mirrored the iTunes progress bar, there is a scaling error in the length of the display bar graphic shown on the iphone5. Visually, it got to 50% of the progress bar [then completed]. So, on the phone, the progress bar was visually 2x times too long.

Same problem with images not opening in 'Mail' iOS 7. I send an image to myself from my iMac. When I receive it on the iMac, displays in the body with no problem. When I receive it on mobile devices, I just get an icon that won't open for me. I'll pass along what I found out today...
When I attach those images, I don't type in the message body, because no message needed. BUT... if I type just a few characters in the message body like "123", those very same images will open perfectly on my mobile devices.
I'm sure it's a clue,.. just not sure where to follow it now? Maybe you can duplicate that behavior?

Rejected By The Server Sending Mail ISP Not Blocking 25

I am getting a reject by the server because it does not allow relaying. I not sure if this is my ISP blocking it because I telnet mydomain.com 25 and get
220 mydomain.com ESMTP Postfix
What on the lion server do I need to do to allow that to pass?

Hello fightnfire,
Thanks for using Apple Support Communities.
I'd like you to please follow the "basic troubleshooting" steps in the article linked to below:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Take care,
Alex H.

Mail does not save attachment in rtfd file

When I save a message with an attachment into rich text file, the attachment is not saved.
I have an email with an attached word file: I choose File>Save As..., I check the box "Include Attachments", I choose the Format as Rich Text and navigate to the folder I want. The resulting file has the extension rtfd, but the word attachment is not inside it. Any clues?
Thanks

Same issue here. After searching Apple support found this:
http://docs.info.apple.com/article.html?artnum=307193
Basically the "solution" is to manually save the attachments separately.

Help!? Mail will not open attachment ?

It's a word document but it is saying it cannot find an application to open it.

Just to check:
Do you have Word (or some other application that can open Word documents) installed on this Mac?
What happens if you download the document (e.g., to your Downloads folder) and double-click it there?
What happens if you open Word (or similar app) and try to open the document from within the application?
Other information that might turn out to be useful:
What year/model Mac Pro do you have?
What version of [Mac] OS X is it running?
What version(s) of Word (or similar app) is installed?

Software restriction policy not working correctly

Ladies and Gents,
we run a windows server 2008r2 environment.
we have a software restriction policy in place for quite some time now and it's been working fine until about a week ago. here's how we have it setup:
Enforce = All Software files except libraries (such as DLLs). + All Users.
Security Level = Disallowed
Designated File Types=
Defaults
Additional Rules:
C:\* = Disallow.
The rest of the rules are paths for files and folders that we have set as Unrestricted.
Since about a week ago, our security team discovered that they can open any allowed file type such as text file, and then go to file and click on open. In the open dialog box they would type
in C:\Windows\System32\drivers\etc\hosts and then click and open it would actually open the hosts file.
I even tried adding a path rule for C:\Windows\System32\drivers\etc\hosts with Disallow, and it’s still allows opening this file for non admins.
Any ideas as to why is software restriction policy not blocking access to any files or folders that are not explicitly allowed via a path rule?
Any help or comments are much appreciated.
Mohsen Almassud

You are moving in a wrong way. Software Restriction Policies are designed to prevent users to launch executables/applications. It cannot prevent you from opening TXT file, because it is not an executable. In order to prevent TXT files, you have to block
notepad.exe executable. It is very different technology.
You must move to a permission configuration. If there are folders users should not access, remove them from respective folder's ACL. You must be careful with restricting user access to system folders (%systemroot%), because you may block critical applications
and eventually no one will be able to log on to server, because logon-dependant paths are not accessible due to restrictions in the ACL.
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Check out new:
PowerShell FCIV tool.

Attachment Mail Policy

Dear Expert,
I'm not sure Exchange Server have some mail policy below:
Eg: when we received mail with attachment from outside, I would like to separate the attachment from the Email.
Only Email(message) will send to the our internal
recipient, the attachment will go to ‘Attachment Server’.
*In the email will have URL or Link to download the attachment from our FTP / Files server. Please Suggest.
Thank you

Hi,
Is there any update with your issue?
Agree with Amit. Exchange server 2013 doesn't have a built-in function that can separate attachments from emails and save them to another place. Thanks for your understanding.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Mail.app osx lion receive from hotmail does not display attachment

mail.app 5.2 (1257) osx lion 10.7.3 receiving mail from people sending with hotmail do not display attachment
the attachment counter says 2, in the message overview
but I only see one, not the one I want to see, when I click that message, and try to save as
the one I do see was mine, that returned because of reply to my message
the attachment attached in hotmail by the other person is not viewable or downloadable
in the message source the attachment is there...
--_98d1a076-fcb8-4b8d-93de-5fa8b8e59460_
Content-Type: multipart/alternative;
    boundary=_1ae32142-6165-4e42-b930-818ef81314da_
and
--_98d1a076-fcb8-4b8d-93de-5fa8b8e59460_
Content-Disposition: attachment;
    filename=some.pdf
Content-Type: application/pdf;
    name=some.pdf
Content-Transfer-Encoding: base64
JVBERi0xLjMKJcTl8uXrp/Og0MTGCjQgMCBvYmoKPDwgL0xlbmd0aCA1IDAgUiAvRmlsdGVyIC9G
bGF0ZURlY29kZSA+PgpzdHJlYW0KeAG1WNtu20YQfddXTIGiSABjsxcuyU2emqAuegXSCOgzLa2k
TSRS5pK2la/vWd5kq4q8BlobMGl7PGfmzNmZWd/SR7olkbKURM60MUaSznKWU6YTfK0t/U0lvfng
BS088e7TL/A3nMmEh4/+h9N3iqeMK2MozTXLZ4sdvZ+T0L3Z+Jzv6M21YIIEzVf06rvXNP9MP827
YL7lWCrFcgm/ijMhLzmWjA+Of3frTUPX29ZvYiAUMpea
and so on

how do you log into hotmail at work? via webmail interface? hotmail provides POP email access only when using an email clienet and you probably have Mail set to remove messages from server after downloading them. go to Mail preferences->account->advanced and check those settings. you can change them to leave messages on server or to remove them from server only when they are moved from the inbox.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

Hello nmssns,
Thank you for contacting Apple Support Communities.
You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
About Apple ID security questions
http://support.apple.com/kb/HT5665
Regards,
Jeff D.

I want to drag files to mails but not in body of mail , more over the available type of attachments is only photo or video so how I can attach another type

I want while replying incoming mails to drag files to mails but not in body of mail , more over the available type of attachments is only photo or video so how I can attach another type

There is no dragging of anything in iOS.
Attach as many files or emails as you'd like until it reaches the max capacity of attachements for the email provider.

Mail policy not blocking attachment

Similar Messages

Maybe you are looking for