Mail problem with receiving

Hello ,
Since I have installed Lion , gradually my received mails are disappearing and since today I cannot receive mails at all. Sending mails is no problem !
Any idea's ?
vissc636

hi,
welcome to the posts.
I believe it might have something to do with the way the email accounts work. Although my .mac account is fine, my other email address only allows one machine to connect at a time. If I have the iPhone on I do not get emails into my computer. Switching the phone off ( well clicking the top button), enables the computer to pick up the emails.
adam

Similar Messages

TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password. This started yesterday. I have no problems with receiving or sending emails through Mail

I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address. This started yesterday and occurs about every 5 minutes or so. There are no problems with receiving or sending email through Mail. I did change me email password several days ago but have no problems sending/receiving since then.

I fixed the problem. I opened Preferences in ICal and entered my new password. No more pop-ups

Problems with receiving

hello again! : ( I have problems with receiving mails, my
installation is local, therefore I am using telnet but it marks errors
to me you have some idea?
bash-2.03# telnet pegaso.qoslabs.com 25
Trying 192.168.20.20...
Connected to hostname.com.
Escape character is '^]'.
220 pegaso.qoslabs.com -- Server ESMTP (Sun ONE Messaging Server 6.0 Patch 1 (built Jan 28 2004))
MAIL FROM: [email protected]
250-2.5.0 No HELO/EHLO seen; continuing anyway, [192.168.20.20].
250 2.5.0 Address Ok.
RCPT TO: [email protected]
550 5.1.1 unknown or illegal alias: [email protected]
RCPT TO: katiuskac
550 5.1.1 unknown or illegal alias: user
DATA
554 5.5.0 No recipients have been specified.
QUIT
221 2.3.0 Bye received. Goodbye.
Connection closed by foreign host.
what is the solution?
do you have any idea?

If the MTA believes that you have an error, it will give you the 5.5.1 error.
The error may be any of several provisioning problems. Since you haven't sent me the ldap entry for the user, I really can't tell which error you may have made.
A common error is the value you placed in "mailhost".
This needs to be the Fully qualified name of your mail server, not an alias. If you desire to use an alias for the system, you need to make additional configurations.
Please believe me, I'm trying to help you, but when there are dozens of possible errors, and I have no data to examine, I can't tell which error you may have made.
I do know that if you correctly provision a user, that user will work.

See Below. I have a problem with receiving email. Sending is ok. This is for my Thunderbird email account.

"An error occurred while sending mail. The mail server responded: 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table. Please check the message recipient [email protected] and try again."

''I have a problem with receiving email.''
''An error occurred while sending mail.''
Who is right here?
''This is for my Thunderbird email account.''
There is no such thing as a 'Thunderbird email account'. Thunderbird is an email client, and you use it to retrieve mail from an account you created with your email provider.

Error while posting GR from EWM in ECC. "Problem with receiver finding"

Hi
I have completed putaway of inbound delivery in EWM. This has triggered PPF to ECC for GR posting. This is stuck in ECC SMQ2 with error "Problem with receiver finding".
I have checked ECC>EWM interface configuration. Handling unit management setup in ECC and EWM. Do not see any issues there. Also tested GR account postings with IM storage location for Po in ECC. This is also working fine...so no issue with account determination.
Unable to figure out what is causing issue. Please help. Thank you.
Best Regards
phani sai MN

Hi All
Thanks for your responses. Issue was with distrubution model fiter parameters. for message type InboundDelivery.Deliverychange there was additional filter parameter for logical system. Removed values for logical system and only retained warehouse number.
With this issue is resolved. GR is posted succesfully in ECC.
Best Regards
Phani sai MN

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

Element v.11 & 9 Photo mail problem with MS Outlook

Looking for a fix: Elements v.11 has a photo mail problem with Microsoft Outlook mail, even when Outlook is designated the defaul e-mail program in Windows internet.
Is there a fix?? Thanks.

I just posted the same problem and so I'll join this thread, hoping to see an answer to your question. By the way, this PSE11 feature worked fine for me with Outlook 2007, but stopped working when I upgraded to Outlook 365.

Problem with receiver mail adapter

Hi All,
I have a proxy to mail scenario. I am using mail message format from service market place.
Now this is the xml after executing mapping:
<Mail>
<Subject>XYZ</Subject>
<From>From_email</From>
<To>To_email</To>
<Reply_To />
<Content_Type>text;charset="UTF-8";name="MYFILENAME.csv"</Content_Type>
<Content>
<Line>
<Object>0000001</Object>
<Code>1001</Code>
</Line>
<Line>
<Object>0000002</Object>
<Code>1002</Code>
</Line>
</Content>
</Mail>
<Line> tag gets repeated in the <content> tag. I want a csv file as mail attachment with the following content:
0000001,1001
0000002,1002
First i used StrictXml2PlainBean. But, this was trying to parse all the fields including Subject and To fields.
I only need data in <content> tag to be sent in csv file.
So, i used MessagetransformBean. Even this is throwing parserExceptionerror: No data allowed here: (hex) 30, 30, 30(:main:, row:6, col:3)(:main:, row=6, col=3).
Which module bean should i use now? What should be the parameters?
Please let m know.
Many Thanks
Chandra

Hi Prateek
1. Isn't it a comman scenario to send extracted data from SAP, in a csv file as an attachment to email?
2. How can i supress fields from mail package (from, to, subject etc) while using StrictXml2Plain bean?
Thanks
Chandra

Mac mail problems sending receiving problems

I'm having a problem with mac mail for the first time. I am unable to send or receive email. It was working perfectly yesterday and this morning nothing.
It said I was unable to connect with the server and unable to verify my username and password. After an hour long converstion with my DSL carrier
all my passwords are verified. I have sent out test emails to friends and nothing is showing up in my sent folder.
Any thoughts suggestions on how to fix this.
Thank you.
-ksb

Same here, I have Maverick, My exchange email keeps prompting me for my password, I know it is correct as i can access through Web. I deleted all email accounts off of phone, pad, Mac Book and I Mac. I deleted the entries inkeychain that had to do with the email accounts, I verified and repaired the keychain. Then entered my exchange email account aagin, it did find it and started downloading all entries. Then I added back my I cloud to the I mac. for some reason it again cant recongnize my password. help!

Problems with receiving signed message in outlook

Hello
I have a problem with signing message using Javamail. I use a sample program code that I got from some tutorial - it seems to work fine but when I receive the message using outlook express there are fallowing warnings:
- the message has been changed by untrusted people
- the e-mail address from the certificete:... (here ma address) doesn't match the address of the sender:... (here no adress)
I set all the varables: 'sender', 'replyTo', 'return-path' and 'from' with my address used in the certificate. I don't know why there is no address after the word: sender. Maybe some of you had such a problem, solved it and could share with me what is wrong with my message?
ania

Hi
It's me again. I solved the problem.
The first warning was because I changed the message after signing it, before sending :), and the second (that was worse) was because I was setting up all possible fields: sender, from, reply to and return-path - only sender should be set - now everything works great :)
ania

Problème avec photos dans mail IPAD - Mail probleme with picture on IPAD

Bonjour,
J'ai un problème avec les mails contenant une ou des photos envoyés et reçus de mon IPAD3 vers un autre IPAD3.
Lorsque j'envoie un mail avec une photo prise dans un de mes albums, le destinataire ne reçoit pas la bonne photo sur son IPAD alors que le même mail ouvert sur un PC ouvre la bonne photo. La photo qui s'ouvre sur son IPAD est une des photos de ses albums a lui.
L'inverse est identique,si on m'envoie un mail je n'ouvre pas la bonne photo sur mon IPAD.
Je connais plusieurs personnes ayant le même problème avec leur IPAD3.
Que puis je faire ?
Merci,
Raphaël
Hello,
I have an email problem with picture sent and received from on my IPAD3 to an other IPAD3.
When I send an email with a picture from one of my albums, the receiver don't receive /open the good picture on his IPAD. But in a PC the good picture has received. The picture opened is one of his albums.
The opposite is the same, when I receive an email with picture from an IPAD, a wrong picture is opened.
I know some people with the same problem.
What can I do ?
Best regards,
Raphael

I am having the same problem and it is even bigger.
When opening a 1-page PDF in iBooks and sending it via mail it is sent inline as preview, but the recipient cannot open the file anymore. Also on iPad and iPhone there is no "open in" possible.
Somehow the mail app does destroy the file. What is going wrong?

HT4623 is anyone else having problems with receiving and sending text messages. most people in my contacts are not getting messages that i send to them.

is anyone else experiencing problems with (SMS) text messaging. Most all of my daily contacts dont receive my messages.

Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.

Mail problems with Panther

I'm having difficulties downloading email into my client mail on my IMac. (I use Macmail, through BTinternet, an outside ISP. (Not Mac) The problem arose when I recently sent out a round robin email to a large number of hotels in Italy enquiring about accommodation - it's clear from my webmail account that dozens of them replied with quite large emails, brochuires etc etc etc. When I try to download these into my inbox, the spinning icon continues to spin round before telling me that Port 110 or something cannot accept or send emails or that my mail account has timed out. Any thoughts would be much appreciated. There is no problem with the interent connection, only mail

I just read what you wrote. So you are talking about Mail. All right. Can you see how big the inbox is in Mail - that is reported at the top of its window. I am asking this to see if you have an overfull inbox, which can cause problems.

Problem With Receiver Communication (File Adapter)

Hi,
My SAP XI Version is 3.0 with Service Pack 7,I have a strange problem,
I have a flat file coming from Unix system,I need to convert this into XML and put a copy in the Archive mode and send the XML file,getting it converted into flat file format send it to the receiver.Here I have to do the content Conversion,So,I have done content conversion while configuring Sender and Receiver Communication Channel.
I am using NFS as Transport Proctocol.So, everthing was fine when i run the scenario,after activating.The Sender communication Channel is Archiving the files.But I am unable to see any file with receiver communication channel.
So,for this I have checked up with Adapter monitoring in Runtime Workbench. In my File Adapter My Sender as well as Receiver Communication Channels are in Green.They are mentioning that Sender Communction is sucessful and
RECEIVER COMMUNICATION IS Sucessful but no messages processed.
Can any one suggest what to do now.Everything is fine with Content conversion and Unix System.But my receiver is not receiving any messages.
Should any OSS notice or patch work needs to be applied.
Thank You,
KishoreJ.

Hi Kishore,
I Guess you should first see if the file is being picked......for that do the following.
While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
Next, look into the RWB--> FILE ADAPTER and see the log of the file adapter
and also, you can see the flow of your message in the integration engine in SXMB_MONI.
Ans still if your message is not showing up in SXMB_MONI, please do as explained below.
Increase logging and trace level in:
SXMB_ADM -> Integration Engine Configuration -> Specific Configuration
Also create entries as follows in it:
LOGGING = 1
LOGGING_SYNC = 1
TRACE_LEVEL = 3
TRACE_LEVEL_PROPAGATION = 1
Also refer XI: I cannot see some of my messages in the SXMB_MONI
Regards,
Abhy

Mail problem with long titles using utl_smtp / mixed content / attachements

Hello,
I'm having a problem with sending emails. The title as well as the body needs to be able to contain accented letters (é ç ...).
For the body i got it working.
And the title works fine too, untill the encoding passes a certain length, then goes all wrong and my mail header starts showing up in the mail body.
Could anyone help me in finding a solution?
Thanks in advance
Below my code:
DECLARE
   v_From       VARCHAR2(80) := 'test@localhost';
   v_Recipient VARCHAR2(80) := 'test@localhost';
   v_Cc         VARCHAR2(80);
-- long subject causing problems
   v_Subject    VARCHAR2(32000) := '123456789111111111111111111111118888888888888111111111111111991234567891111111111111111111111188888888888881111111111111119912345678911111111111111111111111888888888888811111111111111199';
   v_body       VARCHAR2(32000) := '<a href="#">tester</a><br><br>en nog wat éékes en ççkes';
   v_Mail_Host VARCHAR2(30) := 'localhost';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
-- write header
    'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
    'From: '   || v_From || crlf ||
    'Subject: ' || utl_encode.MIMEHEADER_ENCODE(v_Subject) || crlf ||
    'To: '     || v_Recipient || crlf ||
    'Cc: '     || v_Cc || crlf ||
    'X-Mailer: Mailer by Oracle UTL_SMTP' || crlf ||
    'X-Priority: 1' || crlf ||
    'MIME-Version: 1.0'|| crlf ||       -- Use MIME mail standard
    'Content-Type: multipart/mixed;'|| crlf ||
    ' boundary="-----SECBOUND"'|| crlf ||
    crlf ||
-- add message body
    '-------SECBOUND'|| crlf ||
    'Content-type: text/html; charset=UTF-8'|| crlf ||
    'Content-Transfer-Encoding: base64'|| crlf ||
    crlf ||
    utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw(v_body)))||
    crlf ||
-- add csv attachment
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/plain;'|| crlf ||
    ' name="excel.csv"'|| crlf ||
    'Content-Transfer_Encoding: 8bit'|| crlf ||
    'Content-Disposition: attachment;'|| crlf ||
    ' filename="excel.csv"'|| crlf ||
    crlf ||
    'CSV,file,attachement'|| crlf ||   -- Content of attachment
    crlf ||
    '-------SECBOUND--'                            -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
/

Hi,
I did not think the characterset and database would matter for this problem, but here is the info you requested.
The database is an Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
The characterset : NLS_CHARACTERSET     AL32UTF8
And i don't have a clue about the characterset of the operating system (not even sure what the operating system is), but i think that will be utf-8 aswell.
I'm not sure what i did, to come over as rude, but i didn't mean to and i apologize for it.

Mail problem with receiving

Similar Messages

Maybe you are looking for