Mail Program Hung Up on my new iPad

I just received my new iPad today! I was busy setting things up and all was working well, and then my Mail screen froze. I was entering some names from an email into my contacts list when the screen dimmed a bit and locked up. Now, I can't get it to work. Tried shutting the iPad off and turning it back on, but it faithfully brings the same frozen screen back. What is up with that? I thought that Apples didn't crash. Every other program still works with no problem, so I guess technically it isn't a crash. Can anyone help me?

If an App is stuck, you can force quit an application: Press and hold the Sleep/Wake button on top of iPad for a few seconds until a red slider appears, then press and hold the Home button until the application quits.
If you can’t turn off iPad or if the problem continues, you may need to reset iPad. This should be done only if turning iPad off and on doesn’t resolve the problem.
Reset iPad: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

Similar Messages

  • How do I get my email in Apple's Mail program from old drive to new drive?

    I can not determine from Apple's support info how to export my email in Apple's Mail program from the old drive to the new drive.
    The old 60 GB drive was at 55GB and had 3 volume structure problems. It would not backup all files using SuperDuper!, but I could backup the user files onto an external 250GB Tintanium Fantom Drive. So I installed a new 120 GB in the iMac and took the old 60GB drive and put it in an external firewire drive housing, which mounts, runs and will even act as the startup drive. I installed 10.3.9 on the new 120GB drive. I was able to export the address book over to the new drive with no problems, but I don't know how to export the email.
    There does not appear to be an export function in Apple's Mail program (This sounds kind of ???).
    I have a lot of email (#???) in a lot folders and subfolders (60) in addition to the inboxes, plus all the sent mail (2,000)

    The Mail.app preference file (which stores all account information and general Mail.app preferences) is located at Home > Library > Preferences > com.apple.mail.plist.
    All Mail.app mailboxes and other data is stored in the Mail folder at Home > Library > Mail.
    With the Mail.app quit on the new hard drive, place a copy of the Mail folder from the old hard drive at Home > Library on the new drive. If there is an existing Mail folder at Home > Library, this will replace it.
    Place a copy of the com.apple.mail.plist file from the old hard drive at Home > Library > Preferences on the new hard drive. If there is an existing com.apple.mail.plist file at Home > Library > Preferences on the new hard drive (and there should be one if you have launched the Mail.app on the new hard drive), this will replace it.
    Launch Mail on the new hard drive and the Mail.app should be completely restored or identical to the Mail.app on the old hard drive.

  • 2 different mail programs on 2 macs? New Leopard  Install

    I bought the family 5 pack of Leopard. i installed it on my MBP and on my iMac. The mail program is different.. On my MBP it has the "check Mail" icon to the right/Center with other icons and new stuff..
    On my iMAc the check mail icon is alone, far to the left and there is a "Mail Activity" box in the bottom left??
    Anyone know why? They both appear to be version 3.0 (912.1/912)
    Thanks

    When upgrading to Leopard, did you do a clean install or the Archive and Save?
    If you did the last one, then it kept the previous settings that you had on Tiger.
    You can rearrange theses icons under View>Customize Toolbar.
    I hope this will help you.
    Regards
    Pedro

  • My MacBookPro is locked up in the mail program. It won't allow me to shut down.  Help!

    My new MacBook Pro wont shut down because the mail program cancels the shut down. I try again but nothing happens. The drop down menu doesn't have the quit mail highlighted. What can I do to get out of the mail program. Obviously I'm new to Apple MacBooks.
    Thanks,
    Jack

    Try one of these:
    1. CTRL- or RIGHT-click on Mail's Dock icon. If there is a Force Quit item in the context menu, then choose it.
    2. Press COMMAND-OPTION-ESC to open the task manager. Select the Mail entry, click on the Force Quit option.
    3. Open Activity Monitor in your Utilties folder. Select the Mail entry. Click on the Quit button, then click on the Force Quit button.

  • New iPad 4 setting up

    I am an original iPad owner.
    I am buying the new gen 4 for Chrissy.
    The question is we own two computers.
    can I set up the new iPad from a second computer.
    All my iTunes library and back ups are on the first computer.?

    No it doesnt. Even in iOS 6.0.1, you still cannot email to groups or create groups in the built in mail and contacts apps on the new iPad. It has nothing to do with what generation the device is, its the iOS that doesn't have the functionality.

  • I have new MacBook Pro with OS 10.10.  My MAIL program was working but suddenly won't recognize my VERIZON FIOS server.   FYI, the MAIL programs on my iPAD and old iMAC continue to work. No answer yet from Apple Support HELP!!!

    I have new MacBook Pro with OS 10.10.  My MAIL program was working but suddenly won’t recognize my VERIZON FIOS server.  FYI, the MAIL programs on my iPAD and old iMAC continue to work. No answer yet from Apple Support HELP!!!

    Additional Information. 
    On my Mail Accounts setup it was set to "verizon.net" on incoming.
    Now it faintly reads, "incoming.yahoo.verizon.net"
    This came up automatically ....  I did not do it and I cannot change it

  • I have a new ipad 2.  The mail program  refuses to send forwarded emails because the recipient "doesn't accept relays."  My desktop and Blackberry forward emails to those recipients  without difficulty.  Help.

    I have a new ipad 2.  The mail program  refuses to send forwarded emails because the recipient "doesn't accept relays."  My desktop and Blackberry forward emails to those recipients  without difficulty.  Help.

    I suspect that you are using the Forwarding option within Workgroup Manager, and this works outside of the postfix alias scheme. I think you should just set those users you are forwarding to, to normal mail users, and put their forwarding rules ALSO in the alias file, so you would have:
    MAILER-DAEMON: postmaster
    postmaster: alex,yong
    alex: [email protected]
    That should do it. You really have to commit to either using Workgroup Manager or Postfix in their entirety. They don't really work too nicely in conjunction with each other.

  • Mail: new message window blocks the Mail program

    Hello,
    When you write a new mail, the new nice interface makes the window of the new mail appear as it did on the iPad. However, this does not allow you to use the Mail program for other uses: for instance, I used to open the new mail window, and continuously switch to other received emails to re-read while typing the new one or similar.
    This is not permitted anymore and the only way I found is to open a new entire mail window, which is not exactly the best solution...
    Does anyone know how to make the popup window of the new email "non-blocking"?
    I think this is a nice-looking feature but VERY counterproductive.
    Thanks a lot,
    Marco

    Hi Marco,
    You can send feedback to Apple at http://www.apple.com/feedback
    As far as I am aware there is currently no way to change the new message overlay in full screen mail.
    J.C

  • Import Mail and Contacts, from Windows XP-based Thunderbird Email to New iPad Air

    Just got a New iPad Air, and I want to import all of my email & contacts (email addresses) from a Windows XP-based Thunderbird Email program.
    Does anyone know how to do this?
    Thank you in advance!

    Do you have all messages left on the server? Then you can simply set-up your Gmail account as IMAP account.
    https://support.mozilla.org/en-US/kb/thunderbird-and-gmail<br>
    https://support.google.com/mail/answer/78892
    To import your contacts from Gmail you can use this add-on:<br>
    https://addons.mozilla.org/en-us/thunderbird/addon/google-contacts/

  • Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

    Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

    Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

    I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
    I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
    The last version on iTunes on my PC was iTunes 7.
    Thanks for your help,
    Julia from Woodridge

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • HT1222 I have an iPhone and new iPad. Epost mail will not open on my devices. Epost says Safari is not compatible with epost. Please address this issue. It is most annoying.

    I have an iPhone and new iPad. Epost mail will not open on my devices. Epost says Safari is not compatible with epost. Please address this issue. It is most annoying.

    Hello:
    You need to contact "epost."  The issue is not an Apple issue....the epost software needs, I assume, to be updated.
    Barry

  • HT4527 I had a music library of purchased songs from Apple on my computer which had to have the Windows program reinstalled, all of my purchases are gone but they are all on a new IPad, I want them back on my computer, how do I do this????

    I had a music library of purchased Itunes on my Windows 7 computer.  I had to reinstall the operating system and I have installed Itunes again.  My library is gone but it is on my new IPad 2 which I am not sure how it got there, but I do not know how to get it back on my computer where I would like to use it with other programs or to burn discs.  What did i do wrong or how do I do this??  Someone, please HELP.

    Thank you, I do not know if I have a IPad to computer cable to connect, I have looked and cannot find one but will keep checking.  This must be the answer.  Thanks so much.

  • How to use the Eudora e-mail program with new ports

    For those of you that still use Eudora as your mail program. Here is how I made the required changes for the new port settings
    1) Open Eudora and from the "Tools" drop down menu select "Personalities"
    2) In the "Personalities" pane - right click the account you want to change and select "Properties"
    3) In the "Generic Properties" pane change the following
       a) Change the SMTP server to    smtp.verizon.net      and leave the "Authentication Allowed" box checked
       b) In the"Secure Sockets When Sending" selection box pick "Required,Alternate Port" . This both turns on SSL
           and makes the port  number 465 as required by Verizon
    4) Click the "Incoming Mail" tab at the top and then make the following changes
       a) Change the POP server to     pop.verizon.net
       b) In the"Secure Sockets When Sending"  selection box pick "Required,Alternate Port" . This both turns on SSL
            and makes this port  number 995 as required by Verizon
    Thats it . It should work for you now. You need to do this for each "Personality" (Sub account) you have

    Eudora users may also need to make changes to Eudora's Options (Tools > Options) "Getting Started", "Checking Mail" and "Sending Mail" in addition to the changes for each Eudora Personality. I outlined those changes in the "Eudora & server changes" thread--note there is a typo ("smpt" rather than "smtp") in the first post (couldn't edit that post to make the correction) in the thread so make sure to check the entire thread as a later post shows the correct entry.
    I had problems with Eudora sending mail (I didn't have problem with incoming mail because I don't use Verizon's servers for that) until I made changes to both Personality accounts and to the Option/suboptions noted above.
    Did you get things to work properly without having to make changes in Options?

  • How do I add e-mail addesses to my new ipad mini or can I import them from my PC - e-mail otherwise working OK?

    How do I add e-mail addresses on my new ipad mini or can I import them from my PC - e-mail othwise working OK?

    You have to manually add:
    Settings > Mail, Contacts, Calendars > add here
    Read here: http://help.apple.com/ipad/7/#/iPad995bb603

Maybe you are looking for

  • Schedule the Execution of Query

    Hi, I want to schedule the excution of Query in BI7 periodcally like weekly or monthly. I dont want to use Broadcasting or Reporting Agent. Is there any way.. please help...

  • JDBC error msg

    Can u please tell me the reason behind this error msg: Scenario: Idoc to JDBC When I posted inout msg thru RWB,I got the following err in CC monitoring: Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error

  • Keithley 236 with C#

    Dear all, We would like to develop a software with the Keithley Measure Unit Model 236, C#, National Instruments Gpib interface and Measurement Studio 8.0.1. Do you have experience how this can be realised? I could only find examples and drivers for

  • Indirect Referencing

    Dear All Assalam-o-Alikum, i have write this code DECLARE V VARCHAR2(50):='V1'; V1 NUMBER; BEGIN dbms_output.put_line(v); end; now i want that what ever value variable "V" contain, this vale consider as variable and value should be assign to this var

  • Find out where my log4j is configured from

    now that i got my xml config working, it seems that every logging statement is generating 2 log messages on the stdout. one of them comes from my xml config and the other??! how do i find out why/where the evil log statements are configured?