Mail Program - popup message won't let me access my emails
I sure hope someone can help me with this problem!
I received an email to my gmail account, and when I tried to open in up with my Mail program - I got this message box
" To view this page, you must log in to area “WebMail” on secure97.inmotionhosting.com:2096."
It won't let me view any other email. I can't do ANYTHING with my mail program.
Well, somehow, when I tried to re-open my mail, I clicked the other folders in the left-pane (ie. junk, sent, etc) and the message popup went away.
So I guess this isn't an issue anymore.
Similar Messages
-
Error Message - Won't Let Me Use My Memory Chip
I need help. I turned off my phone today and when I turned it back on this message came up, "A Media Card has been inserted that contains errors. To correct the errors please use a disk error-checking utility on a computer." I previously had songs, ringtones, pictures, etc on the media card and now it won't let me access them. I hooked it up to my computer hoping it would automatically fix itself but it didn't. However, when I brought up my media manager it would let me click on my media card as if it were still there and all of the media was still there. But the same message appears. I've tried taking out the media card and everything. PLEASE HELP.
I had the same problem only when I ran the disk error checking utility, it did seem to scan and fix a huge number of issues, only I still get the same error message and now I cant seem to access my SD card from my phone. Also, when I hook up my phone to the computer I am able to view most of the pictures but not all of them. The pictures that I cannot open do not seem to be readable. They are saved as weird symbols and I cant seem to view them or save them as picture files. Can I still recover these pictures and how can I resolve this error message??? Please help
-
My iPhone was fine earlier today, but in settings....it won't let me access iCloud, FaceTime, mail settings.....what the heck? I've tried everything. My iPad is fine and iCloud etc. works!
Turn OFF the restriction to allow changes to accounts you've set in Settings > General > Restrictions.
-
Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
If that's not what you see, post the contents of the window. -
I'm running the latest update, have restarted and even reset the settings for the whole systems. It's happening on my iPad and iPhone.. When I disconnect from wifi it acts normally, but if I connect to wifi that's when it won't let me select multiple emails. I will click on multiple but it ends up deselecting them
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
I accidentally updated iPhoto on my (now) external hard drive and now it won't let me access any of my photos. What can I do?
So, you have two versions of iphoto? One from the old machine and one from the new?
If so, forget about opening with the older version of iPhoto.
For the newer version:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it so anyone can help me with it or can i put another apple id to it without putting the first password?THANKS FOR YOUR HELP.
Then call AppleCare and talk to someone in account security.
-
After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?
Try "Pacifist"!
Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package -
I need to change my Apple ID but it won't let me because the email address I want to put is already set as the second email address. I have the new iPhone 5
Hello Krystalb0407,
Thank you for using Apple Support Communities.
For more information, take a look at:
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
You can edit or delete your rescue email address at My Apple ID.
Have a nice day,
Mario -
Router won't let me access website
Hi, i have a Lynksys wireless router model number WRT54HG and im haveing this problem where it won't let me access this website tera.enmasse.com or the game they host "Tera: Rising" throught its launcher. I've bypassed the router and connected stright to the modem and the website loads. I've tried to troubleshoot the problem by restarting the router, turning it on and off, i've even upgraded its firmwere but nothing works and i've come here to see if anyone can help me. One more thing, for some reason i have access to the tera support page support.enmasse.com but nothing else.
Solved!
Go to Solution.You can ask for the port numbers that you can trigger on the router from the website’s administrator. With the port or ports being triggered, the router will send a request to access the server for the game Tera: Rising. Refer to the links below on how to enable port triggering on the router once you obtained the port numbers. Also, disable the Filter Anonymous Internet Requests on the router by un-checking the box which you can find under the Security of tab of the router’s user interface.
Setting up port range triggering on your Linksys Wi-Fi router
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=82e45c13dbcb4ff189c9f3a455951f0b_21486.xml&pid=80&...
Difference between Port Forwarding and Port Triggering
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3706 -
My Apple TV won't let me access Netflix, but all other internet connections work. It keeps saying :"accessing netflix" and won't connect Any ideas as to the problem?
Thanksare you in a country where netflix is supported ?
-
i can't load my email content and it won't let me verify my email account
And, if you use Touch ID, there is no option for a delay.
-
I need to change my password for outgoing mail server but it won't let me
I Need to change my password for outgoing mail server on iPad 2 but it won't let me change it. I can't send out mail
I assume that you mean that the setting is grayed out and that is what "it won't let me" means. Have you tried selecting another SMTP server of you have another one available in the settings?
-
My iPhone 4 has just deleted all my messages & won't let me receive or send texts?
My iPhone 4 has just deleted all my messages & won't let me receive or send texts?
There is no way possible for your iphone to delete message by itself.
If your having issue with text - contact your cell phone provider as texting is a carrier feature.
You can also look at this link to troubleshoot http://support.apple.com/kb/ts2755 -
Mail program quits responding - won't work at all!
Hi,
I'm having an issue with my mail program. I can open it and watch it look pretty for a while, but if I click on *anything* at all, doesn't matter what it is, the little colored wheel starts spinning and spinning, and eventually the program stops working at all. I get an error message that mail has "quit responding". I can't find anything on Apple support, so I'm asking for help from someone out there, who maybe knows what's going on? I've restarted my iMac several times (for updates and the like). I haven't made any changes to my mail accounts or anything, so I'm not sure what's up!?! I have a 27" iMac, late 2013 with Yosemite (latest version - 10.10.3), 3.5 GHz, Intel Core i7, 16GB RAM, NVIDIA GeForce GTX 780M 4096 MB. I hope that's enough information... (oh, not transferred from another Mac, this one is "clean").
Please help!
NancyHave you done any of the standard troubleshooting outlined in the manual?
Restart?
Reset?
Restore?
Restore as new phone?
Maybe you are looking for
-
Visual admin problem(urgent)
Hi Gurus, its very urgent please help me i am getting the below error when i am loging into visual admin <b>Error while connecting Error in SPNegoLoginModule.</b> thanks and Regards, Kishore
-
Data type selection Problem in ztable to use in the Module Pool Program
Dear Experts, I have created a z-table which is used in Module Pool Program in which i have to save the information saved by the endusers in z-table. But the problem comming is that the amount of information saved by the endusers is so havey & our ta
-
Hi, I have change the depriciation key for some asset through BDC and assign new Depriciation key for those asset now i want to assign original key to same asset can i get the T.Code where should i get the old key & new key for all the asset and the
-
Currency issue in Local PO in SRM ( SRM 4.0, Ext. Classic scenario)
Hello SRM community, There is contract exist at a Product category level which is created in currency Euro & can be used by both local as well as well global purchasing org. for subsequent PO releases( Call off). We are using extended classic
-
Mac book spec for mountain lion
I am trying to purchase and install mountain lion. I have a macbook 4 see spec below. Model Name: MacBook Model Identifier: MacBook4,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.1 GHz Number Of P