Mail received signal delayed

For the past few weeks the alert window shows mail as been received and the mail icon shows the number of mail unread as expected.
However, the chime used to sound at them moment that mail arrived, but now the chime doesn't sound for 30-45 seconds after mail comes in and shows received. I can open and read a mail, close the app before the chime sounds.
Not really a major issue, but is weird aince the chime is now virtually worthless most of the time.
Anyone else seeing this happening? I am still on an original iPad and this seems to have happened since Apple app updates were done for iOS 6 although I am can only run iOS 5.

1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

Similar Messages

Mail received is delayed by 1 hour from certain emails?!!

I have been having trouble getting emails from a co-Mac customer who is also using Mail. He'll send me an email & I won't get it for an hour or so. What can cause this?
I had read elsewhere that the emails may be getting routed their their ISP before it gets to mine. I just find it strange that it only happens with this particular customer. What can I do on my end to prevent this from happening etc. I am using the "Mail" program in OS X 10.4.11 and I believe he is using OS X 10.3ish and the "Mail" program" as well.

Jon,
Every legitimate outgoing E-mail goes thru their own ISP first ..... then the incoming ISP last.
Your customer's ISP probably has a low limit on KB size and/or their server is overloaded most of the time. Advise your client to contact the E-mail tech at their ISP and explain the problem.
If the issue was on your end, you would have the delay all the time.
The different version OS has no bearing in this matter ....... not even between Windows or Macs.
DIXIE

Mail receiving delay

Hi all,
If this has been answered here before, I apologize, I could not find it.
It seems that the mail server is delaying email arbitrarily from outside senders. What is happening is if say "[email protected]" sends an email directly to "[email protected]", the Mac Server is not putting it right through, it will show up in a few hours later. But if the same user, "[email protected]" replies to an email sent from "[email protected]" it comes through right away.
The problem is happening very arbitrarily and with multiple outside domains and senders, so I cannot figure out how to troubleshoot it...
Also on a side note, the logs state that some of the users exist more than once. (i.e dovecot[58]: auth(default): od([email protected], [IP Address] ): user "username" exists more than once ). I don't know if this has something to do with it, I kind of figured it was a Workgroup Manager issue with shortnames.

Chris,
I agree that inexperienced users are overwhelmed and may have difficulties to decide which options they need to use. I also fully agree that greylisting will block significant amounts of spam and is well suited for a mail server maintained by non professionals. However, "stealthy" options confuse new users even more.
In Server Admin, they tick "Enable junk mail filtering" and as soon as they do so, several grayed out options become active. While they may not be familiar to the beginner, the options are written on that page and can be looked up.
Nowhere does it say that greylisting is going to be enabled and so a user doesn't even know what to look for if things do not work. All the user notices are delays.
The problem is further amplified by the fact that the warning logged in mail.log does not specify what is happening. The policy server logs:
"NOQUEUE: reject: RCPT from... 450 ... Recipient address rejected: Service is unavailable;"
while for example Postgrey will log something like:
"NOQUEUE: reject: RCPT from... 450 ... Recipient address rejected: Greylisted, see http://postgrey.schweikert.ch/help/example.com.html;"
Having this extra bit of information would help the inexperienced user in asking for help.
Add to this that greylisting can cause the loss of legit mail if not provided with a whitelist and you get unhappy users.
If it was my call, I'd implement one or more of the following in order of priority:
-A seperate checkbox for Greylisting
-Replace "Refuse all messages from these hosts and networks" with a listbox for whitelisted domains (Refusing mail by IP has become pointless nowadays. Spam comes mostly from botnets).
-Log an explicit warning in mail.log
-If there is no separate checkbox, display a warning when users tick "Enable junk mail filtering", so they now about greylisting
And talking about keeping options down to the minimum: "Accepted languages and locales" is not a very effective measure in fighting spam and can be left to the admins willing to look under the hood.
Thanks for listening.
HTH,
Alex

During snoop. WARNING: received signal 11 from packet

During snooping the local ip address on a V240. I saw this error:
WARNING: received signal 11 from packet 780
What does it mean? Is the hardware faulty? Is snoop faulty?
The packet 780 was going outward and has xxxx in place of some data:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 780 arrived at 15:16:38.22
ETHER: Packet size = 696 bytes
ETHER: Destination = xxxx,
ETHER: Source = xxxx,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: .... ..0. = not ECN capable transport
IP: .... ...0 = no ECN congestion experienced
IP: Total length = 682 bytes
IP: Identification = 52818
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 60 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 8762
IP: Source address = xxxx, xxxx
IP: Destination address = xxxx, xxxx
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 389
TCP: Destination port = 62638
TCP: Sequence number = 2004482227
TCP: Acknowledgement number = 2710103459
TCP: Data offset = 20 bytes
TCP: Flags = 0x18
TCP: 0... .... = No ECN congestion window reduced
TCP: .0.. .... = No ECN echo
TCP: ..0. .... = No urgent pointer
TCP: ...1 .... = Acknowledgement
TCP: .... 1... = Push
TCP: .... .0.. = No reset
TCP: .... ..0. = No Syn
TCP: .... ...0 = No Fin
TCP: Window = 49542
TCP: Checksum = 0xe935
TCP: Urgent pointer = 0
TCP: No options

OK I expect that this explains it...
Patch Id: 112915-03
Problem Description:
4676230 Signal 11 errors(sigsegv) when snooping ldap port(389)

How to speedup receiving signal from Oscilloscope

hello every one.
i have a TEK Oscilloscope(TDS 2012C) and i wnat to analyse signale in labview that i receive from Oscilloscope. i do it, but it shows in labview so slow with delay. i want to receive signals like Oscilloscope lcd!
please help me.
Thks.
Attachments:
Tektronix TDS 200 1000 2000 Series Acquire Continuous Waveform.vi ‏30 KB

samle of signal
Attachments:
F0000TEK.jpg ‏30 KB

Error while sending excel sheet as attachment to Mail Receiver

Hi everyone,
I am facing the below error when I am trying to send data to Mail receiver adapter. The attachment is excel sheet.
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of MessageTransformBean.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of MessageTransformBean..
I don't understand where the problem is. This has been running since long time and last month we have changed our web dispatcher details. I hope everything is fine. But not sure the root cause for this issue.
Please help me in resolving this.
Thank you.
Regards
Bhanu T.

Check if this helps: MessageTransformBean module
Confirm that you have configured the MessagetransformationBean properly.
Are you trying to convert some payload into Excel and send it as an attachment in the Mail CC? If yes, then I hope that you have included the correct Content_type value.
Check this for more info on Content_type: /people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
Regards,
Abhishek.

New mails received after IOS 5.0.1 update do not show graphics but instead unviewable file name and an attachment winmail.dat

I sent out a mail, composed by outlook 2007 in HTML format this afternoon which contained graphics, to several of my friends and copied myself. All of them had duly received the mail and were able to see the graphics in the mail in their iphones or ipads. However, the copy that was extended to myself had only the unviewable graphic filename and also an attachment winmail.dat(which cannot be opened) from both my iphone and ipad (both updated with IOS 5.0.1). Prior to this update, I had no problem of seeing graphics or photos in the mails received in both my ipad or iphone. I ran couple of test mails and they all ended up the same.
Any ideas??

Turned out, it's the Microsoft SP3 update that caused the problem.

Hp laserjet 1300 not receive signals from computer

HP Laserjet 1300 seems not to receive signals from my computer. Please explain
This question was solved.
View Solution.

Are you networked or USB cabled into from the printer into the computer?
What OS are you using?
If you are on windows 7 and networked in, then you need to check and make sure the that the IP address of the printer is listed as the same in the port settings.
If you are on windows 7 and are using a USB cable, then you have to load the printer through the IN-OS driver. See the link below...
Install the driver included in the Windows 7 operating system (OS)
If you are using some other OS or driver, please let me know.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Mail Receiver Error: java.lang.IllegalArgumentException: can't parse argum

Hi everybody,
I get the error in mail receiver CC:
java.lang.IllegalArgumentException: can't parse argument number
My Payload looks like this:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>The subject</Subject>
<From>mailadress</From>
<To>mailadress</To>
<Content_Type>multipart/mixed; boundary="AaBb--984dfgeSSd3532"</Content_Type>
- <Content_Description>
<attachment filename="Filename.txt">content_of_attachment</attachment>
</Content_Description>
<Content_Disposition>attachment</Content_Disposition>
<Content>Constant</Content>
</ns1:Mail>
Any ideas?
Regards
Mario

Hi Mario..
Go thru this thread for it.
Error Catagory : XI_J2EE_ADAPTER_MAIL
Regards

Query on Mail Receiver Adapter

Hello Experts,
I am using Asyn Proxy to Mail Scenario.
Mail receiver adapter generating the Mail with Excel file attachment by using the following details.
R3 coding (Proxy calling code):-
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From Mail ID.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = To Mail ID
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-SUBJECT = 'Alert Mail'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-DATE = SY-DATUM.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_TYPE = 'application/vnd.ms-excel;name="filename.CSV"'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = 'Field1,Field2,Field3'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_DISPOSITION = 'attachment'.
ID COnfiguration:-
    -->Selected the Use Mail Package & Content Encoding = base64
    -->Selected the Keep Attachment option.
I have two questions as mentioned below.
(1)Can i generate the Mail BODY and Excel file attachment both together in a single mail?
(2)With this same IR & ID Objects can i generate only Mail body without any attachment (i.e.
by changing the Content_Type in R/3 coding) ?
Please suggest.
Thanks & Regards
Jagesh

Hi Michal,
Thanks for ur reply.
I referred your Blog /people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments for genreating the
Mail With attachment and Content together.
but when I select the option KEEP ATTACHMENT in the Mail Receiver Adapter and sending only the Content data without any attachment coding as shown in this Blog then also i am getitng attachment(.txt) file and no mail content. In this case i have used the following R/3 coding.
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From Mail ID.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = To Mail ID.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-SUBJECT = 'subject'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-DATE = SY-DATUM.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = 'How are u? This is Mail Content'.
Calling the Proxy method.
Important:- with this same coding if i deselct the KEEP ATTACHMENT option in ID then i am geeting
Mail Content properly.
So i think i have to use different communication chaneel one for the Excel file attachment and second for the Mail content.
Please suggest me if i am wrong.
Regards,
Jagesh

Send XML File as attachement in Mail Receiver adapter

Hi all,
i have the following scenario. i would like to read an XML file from the file system and send this file as an attachement of a mail to a mail receiver specified in this file.
i would like to fill the payload of the mail with some information from the xml file and in addition i would like to send the complete xml file as an mail attachement.
can anybody tell me, how the mail receiver adater needs to be specified ?
best regards,
martin

Hey,
you can go for dynamic configuration of mail adapter.
In this you need to import a mail structure.
mail details such as to, from, subject and content of the mail are a part of the structure.
In your ID check the Use Mail package and also keep attachments.
Now you can give your details in mapping itself.
whatever you want to map in the content of the mail, map it in the content field.
also your file will behave as an attachment.
refer to this blog.
this is the mail structure. Import it as extenal definitions.
<?xml version="1.0" encoding="utf-8" ?>

<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
regards,
milan

Extra header lines appearing in payload after singning and encrypting in Mail Receiver adapter PI 7.31

Hi,
We have a mail receiver adapter which is sending out a edi payload as attachment to the external receiver.
When we send the normal .edi file it is ok.
But when we sign and encrypt the payload and send it out, the external customer receiver decrypts and validates the message successfully but when their application tries to read the edi payload it finds the extra header lines as below :
content-id:
<[email protected]>
Content-Disposition: attachment; filename=xxxxxxxx.edi Content-Type:
application/xml
At their end, their application (DataPower) expects the first three characters of the payload
(decrypted payload) to be either UNA or UNB.This is how it validates whether the incoming message is an EDI message.
But it encounters the extra MIME headers in the payload.
Therefore it gets rejected by DataPower which thinks the content is an
unknown message type.
How to suppress the header lines appearing in the payload(after decryption and validation).
Thanks,
Guest

hi,
try content-type as "text/xml"

How to attach Excel file in Mail Receiver Adapter?

Hello Experts,
In R/3 coding I have Internal Table data available for which i have to generate an Alert mail with Excel file attachment.
This is the scenario of Proxy sender to Mail Receiver. but I don't know how to convert the Internal Table data into Alert mail excel File attachment.
Please suggest me.
Regards,
Jagesh

Hi Santhosh,
Thanks for your suggestion.
But without using XSLT mapping also, I have generated the Excel File attachment.
Throgh R/3 coding I am passing following.
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From Mail Address.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = TO Mail Address.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-SUBJECT = 'Test Alert mail'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-DATE = SY-DATUM.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_TYPE =   'text/plain;name="CSV_data.csv"'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = 'Testing1,Testing2,Testing3'.
      G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_DISPOSITION = 'attachment'.
And in the Mail Receiver Adapter i have configured as following.
Use Mail package and Keep Attachment both options are selectd.
So I am getting the data in different columns in the excel file But How to set the Next ROW in Excel file?
I thnk i am missing something in CONTENT value.
Regards
Jagesh

Mail receiver adapter: THeaderREPLY-TO not working on ASMA

Hello people,
(note: all the @ where changed by " at " because of limitations of SDN)
I'm trying to set some adapter specific message attributes (ASMA) in a mail receiver adapter.
Two properties I'm trying to set: THeaderFROM e THeaderREPLY-TO.
The first one is working great, the second one does not work.
My scenario is Soap to Mail. I send a soap message, in the message mapping a user defined function get the mail address (to and reply-to) and set it with DinamicConfiguration like this (hard coded to be simple):
DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/Mail", "THeaderREPLY-TO");
conf.put(key, "reply.to at teste.com";);
DynamicConfigurationKey from = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/Mail", "THeaderFROM");
conf.put(from, "from at teste.com";);
As in the documentation, it should work. But the mail message reaches the mailbox with mime header Return-Path = from at teste.com.
Reading all the notes related to mail adapter (and adapter module processing) I found the tool TCPGateway to monitor what is going from adapter engine to the mail server. So I changed a little the scenario to test it and now the scenario is Soap->TCPGateway->MailServer. In the TCPGateway I got this:
EHLO brjgs916.weg.net
MAIL FROM:<from at teste.com>;
RCPT TO:<roberti at mycompany.net>;
DATA
Date: Thu, 5 May 2011 19:55:17 -0000
Subject: mail - teste
To: roberti at mycompany.net
From: from at teste.com
MIME-Version: 1.0
content-id: payload-98c5c8b0775111e090110018714e4a28 at sap.com
Content-Type: text/xml;charset=utf-8
Content-Disposition: attachment;filename="Untitled.xml";
Content-Transfer-Encoding: binary
<?xml version="1.0"; encoding="UTF-8"?>
<ns0:MTP_SAMPLE_MAIL_MESSAGE xmlns:ns0="http://soa.weg.net/sampleMail"><Title>titulo</Title><Body>body a ser preenchido</Body><Footer>footer tambem</Footer></ns0:MTP_SAMPLE_MAIL_MESSAGE>.
QUIT
With this information, I found that something is not right in the mail adapter, because it is not writing the relevant reply-to attributes to the mail message.
Some of you has any idea about it?
Thank you in advance.
waldemar roberti
Edited by: Waldemar Roberti on May 5, 2011 5:02 PM

Satish,
Actually (for testing purposes) I have the email roberti at mycompany.com set in all fields of receiver mail adapter mail attributes (from, to, cc and bcc). I turned all of them on and of and analysed the result. It seems that the information whe put on ASMA overloads the information on these mail attributes. But, in mail attributes, we don't have a field for REPLY-TO, just on ASMA we have this field.
So... the problem is in REPLY-TO. It has not been set in mail adapter, even if I set it with dinamic configuration.
thank you.
Waldemar Roberti

Mail Receiver Adapter - Flat File as Attachment

Hello,
I would like to send a flat file as attachment using an E-Mail receiver communication channel.
The flatfile is picked up beforehand using a file sender channel, so there is only routing necessary in PI.
Is it possible to send the flatfile as attachment by checking the option "XIPAYLOAD" or would this result in an error?
The scenario is quite simple and I am looking for the fastest and easiest way to implement it.
Thank you very much.

Hey
You can follow as given in the below blog
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
Thanks
Aamir

Mail received signal delayed

Similar Messages

Maybe you are looking for