Mail redirect rule only redirects mail from certain domain!!!
Hi all,
I set up a rule in Mail to redirect EVERY message to a certain email address (for backup/storage purposes) However it only redirects emails from email addresses with the same domain as my email (eg will redirect mydomainname.com but not otherdomainname.com
Why is this??? Any ideas on how to fix it??? It is getting the mail from an Exchange server if that helps any...
Thanks for the welcome!
Ok so here are some screenshots...
Here is the screenshot of the rule details
Here is the main rules window
And here is a screenshot showing how some are redirected and some are not (the ones that are redirected (and the one that shows the forward icon (it was forwarded before I set up the redirect rule)) are all from the same domain as my email account.
Any ideas? Thanks!
Similar Messages
-
Can't receive mail from external domains (hotmail, gmail, etc)
Hi,
I have a new problem
I can't receive external email. The receive connector that i have is the following:
Default Frontend NAME.NL
TlS, Basic verification, Basic after TLS, Intergrated, Exchange verification. groups: Exchange-server,
exchange-user and anon
This should be enough to receive external mail right? If I test it with gmail or hotmail I get the message: Mail delayedHi,
Is there any update?
Thanks.
Niko Cheng
TechNet Community Support
Sadly no.
I still don receive any mail from certain domains. And gmail still has a +/- 24 hour delay. We now didn't receive some important mail for 1 and a half week. Any more idea's. I'm totally out of ideas -
HI,
We are getting following error message for all users while sending mail to external but we able to receive mail from internet.
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may
be preventing delivery.Hi,
Please follow Luke and Shelly’s suggestion to check your SPF record and Send Connector configuration. Also you can post the complete NDR message(with NDR status code) here for further analysis.
If there is any updates, please feel free to let us know.
Thanks,
Winnie Liang
TechNet Community Support -
Filter set to pass mail from legit domains?
The address (I have many) I use with professional and social networking sites has fallen into the spam space. Using Apple Mail 5.2 I'd like it to consider all mail *not* from certain domains to be considered spam.
In the filter Rules I see the qualifier "Sender is not in my Address Book" but these legit domains send many e-mails and are often slightly different. What is constant is the domain name (Facebook, Linkedin etc). Is there a way to tell Apple Mail that everything sent to a certain mailbox is Junk except mail for a handful of domains?
Thanks in advance,
PaulTry this rule:
"If [All] of the following conditions are met" - "From" - "Does Not Contain" - <the appropriate domain name> with one entry for each domain - "Move Message" to mailbox "Trash".
Regards. -
How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
I'm looking to add another domain as a secondary way for people to get to my content and information.
I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
How do i do that?it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed. -
Can not receive mail from outside domains
We are setting up our OCS 10g mail server, and are having trouble setting up our policies.
-unsure how to allow mail to come in from outside domains
-are able to send mail to outside domains if that one is set. is there a way to allow to send to any outside domain without having to set every single one?it looks like the MX records are setup correctly now, but I am still unable to receive mail from outside domains.
from a gmail address i get the error:
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
TEMP_FAILURE: Could not initiate SMTP conversation with any hosts:
[mydomain.com. (10): Connection timed out]
----- Original message -----
Received: by 10.70.123.6 with SMTP id v6mr2951750wxc;
Thu, 29 Jun 2006 05:22:06 -0700 (PDT)
Received: by 10.70.105.2 with HTTP; Thu, 29 Jun 2006 05:22:06 -0700 (PDT)
Message-ID: <[email protected]>
Date: Thu, 29 Jun 2006 09:22:06 -0300
From: "Chris M" <[email protected]>
To: [email protected]
Subject: test thursday 1
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_77974_24025125.1151583726769"
------=_Part_77974_24025125.1151583726769
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
test
------=_Part_77974_24025125.1151583726769
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
----- Message truncated -----
** i modified the email addressed for the post, actual email addresses were used ** -
Iphone 4 only receiving sms from certain networks- help?!!!!
Iphone 4 is only receiving sms from certain networks - help?!!!
Have you contacted your carrier to report the problem? This is not (and can not be) a problem with the phone. It's a problem with your carrier and/or the way they have your service provisioned.
-
Not recieveing email from certain domains
Hi,
I am having trouble getting to the bottom of an issue which I have had for a couple of weeks now.
We are unable to receive email from certain domains. The big problem is our sister company no one on there domain is unable to send to any party on our domain, this has only just started happening this morning, however email delivery form other domains has
been problematic for about two weeks now. We are receiving plenty of email form other parties still.
Our sister company is not getting any bounce backs and I have checked the message tracking within Exchange 2008 and I am unable to see any email come in at all from our sister company.
It is worth mentioning that the host of our domain is having a number of issues with "Nameserver" when I check on intodns.com and I'm not to sure if this is the problem or not, however we are currently in the process of transferring away form
them and setup with the same host as our sister company. The transfer hasn't happened yet as our current host hasn't released the tags.
Has anyone got any ideas that can help please??What's the path from the sister company to your company?
Is it direct? Or does incoming email first transit through some online spam filtering service (like Postini).
Can the sister company connect using telnet?
Here's some very detailed directions:
http://www.port25.com/how-to-check-an-smtp-connection-with-a-manual-telnet-session-2/
And more concise:
http://exchange.mvps.org/smtp_frames.htm
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
hi there
i've sat on the phone with three people who have been resending emails to me from their office servers, and also gmail, and hotmail and haven't received any of them. I have received a couple of random mails from other people, but i would normally expect 30 - 50 in this time. This is very scary, what can i do ?I lost half a day trying to sort this out - anything above 1MB just not coming through (still not). I ended up on Chat with Support and the guy admitted email had been down since Weds (it was then Fri 20th MAy) but he couldnt give any further info. I did manage to get an extension of my contract free for really rubbish service
-
Mac Mail not receiving mail from certain sender
I'm having trouble receiving mail from a certain sender. I verified that they have my correct email address and I don't think it's getting filtered as junk because my junk mail folder is empty. Is there anything else that could be causing this? Any help would be appreciated.
Try the Mail for Tiger forum http://discussions.apple.com/forum.jspa?forumID=753
-
10.5 - 10.6.2: Postfix not accepting e-mails from certain hosts
Hi
Two days ago we migrated our server from 10.5 Server to a new Mac mini server running 10.6.2 server.
We are now facing the problem that postfix refuses to accept incoming e-mails from most hosts. Some hosts seem to be able to get through, but so far we haven't be able to identify a pattern.
The transfers just times out with various error messages. Below is one of the shorter transscripts. Any ideas where to start looking?
Feb 5 18:36:12 www postfix/smtpd[34067]: connect from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:36:12 www postfix/smtpd[34067]: setting up TLS connection from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:36:13 www postfix/smtpd[34067]: Anonymous TLS connection established from pluto2-mail.kagi.com[67.134.14.166]: TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)
Feb 5 18:36:14 www postfix/smtpd[34067]: 42ABB92A50: client=pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:41:14 www postfix/smtpd[34067]: warning: networkbiopairinterop: error reading 5 bytes from the network: Connection reset by peer
Feb 5 18:41:14 www postfix/smtpd[34067]: timeout after DATA (986 bytes) from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:41:14 www postfix/smtpd[34067]: disconnect from pluto2-mail.kagi.com[67.134.14.166]
Thanks,
IljaHi again,
I was able to further narrow down the problem. The remote server is sending a complete message but postfix on our mac doesn't recognize the end of message token, thus timing out the connection after 5 minutes.
Any ideas? Is this a postfix issue? If so, what can we do about it.
<pre>
0x02e0: 2039 3437 3039 2d31 3430 3520 2055 5341 .94709-1405..USA
0x02f0: 0d0a 5351 4e4d 2d6b 6167 6920 3531 3530 ..SQNM-kagi.5150
0x0300: 0d0a 0d0a 0d0a 0d0a 0d0a 5343 2d54 4659 ..........SC-TFY
0x0310: 5020 352e 3068 0d0a 2e0d 0a P.5.0h.....
19:43:28.538241 IP (tos 0x0, ttl 64, id 8917, offset 0, flags [DF], proto TCP (6), length 64, bad cksum 0 (->9605)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [.], cksum 0x8210 (incorrect -> 0x4852), seq 291, ack 1186, win 33304, options [nop,nop,TS val 928896121 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 0
0x0000: 4500 0040 22d5 4000 4006 0000 6d46 c4f2 E..@".@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 0685 d895 c111 C.......h^......
0x0020: b010 8218 8210 0000 0101 080a 375d d479 ............7].y
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
</pre>
<pre>
19:48:28.318858 IP (tos 0x0, ttl 64, id 27393, offset 0, flags [DF], proto TCP (6), length 118, bad cksum 0 (->4da3)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [P.], cksum 0x8246 (incorrect -> 0x0c90), seq 291:345, ack 1186, win 33304, options [nop,nop,TS val 928899117 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 54
0x0000: 4500 0076 6b01 4000 4006 0000 6d46 c4f2 E..vk.@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 0685 d895 c111 C.......h^......
0x0020: b018 8218 8246 0000 0101 080a 375d e02d .....F......7].-
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
0x0040: 3432 3120 342e 342e 3220 7777 772e 6977 421.4.4.2.www.iw
0x0050: 6173 636f 6469 6e67 2e63 6f6d 2045 7272 ascoding.com.Err
0x0060: 6f72 3a20 7469 6d65 6f75 7420 6578 6365 or:.timeout.exce
0x0070: 6564 6564 0d0a eded..
19:48:28.321859 IP (tos 0x0, ttl 64, id 46435, offset 0, flags [DF], proto TCP (6), length 64, bad cksum 0 (->377)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [F.], cksum 0x8210 (incorrect -> 0x3c67), seq 345, ack 1186, win 33304, options [nop,nop,TS val 928899117 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 0
0x0000: 4500 0040 b563 4000 4006 0000 6d46 c4f2 [email protected]@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 06bb d895 c111 C.......h^......
0x0020: b011 8218 8210 0000 0101 080a 375d e02d ............7].-
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
</pre>
Regards,
Ilja -
Not receiving mails from certain email addresses
I am sending & receiving the majority or my mails without any problems but there are a few email address from which I am being sent mails that I am not receiving. They are not being notified that I am not receiving the mails either.
Could they be blocked on Mobile me? How can I unblock these addresses and retrieve the mail?
Thanks,Yep, that's very typcial of mail from lists...
In Outlook open the message, click on File/Properties, and you'll see a box labled "Internet Headers". I usually copy that out and paste it to Notepad to make it easier to read...
You'll find that there are different addresses in the vairous headers.
This is NORMAL for some types of list mail. -
Not receiving e-mail from certain addresses
I've never had this problem before, but I'm not receiving any emails that come from the community college e-mail system where my husband works. I used to receive them, but today, three different people tried to send me an e-mail from the same place, and I didn't receive them. They aren't in my spam folder. What else should I check? Thank you. The e-mail addresses are from [email protected] Thanks!
Comcast Security Assurance should be able to help you with this. Call them at 1-888-565-4329 (from http://constantguard.comcast.net/dedicated-support/). Note that this is NOT one of the regular customer service numbers.
The first-line reps there are sometimes not very helpful. If so, be persistent, and keep at them until you get a satisfactory answer. -
HT203528 Not receiving mail from certain email address
hi looking for help here I have 2 email address that where put in the junk but are not , I moved the email address to the inbox but then they stopped even coming threw to the junk?... I then thought if I made up a rule to go to a certain folder for this email address I would be happy with this but even this doesn't work and it's taking some times 4-5 hours for me to revive this email address , the server at there end is fine as they send this email to a group and my hotnail account recives it instantly
Any error message provided and if so, what?
Are the message headers available in your account's Inbox mailbox and when selecting a message to view it, the content is not shown?
Is your account a POP or IMAP account? -
SBS 2011 - Using Exchange / Static IP - Cannot send e-mails to certain domains
Hi,
Client is running SBS 2011 using Exchange to send and receive e-mails. For some reason 5 days ago they got call from clients stating they had not received e-mails from them (stpeterdeland.org). I ran the online Exchange Analyzer - (No errors). The
strange thing is the client was not receiving "NDRs". i talked with one IT admin for one of the domains. He saw our e-mails being held up by his spam filter and has since "White Listed" the domain IP (65.34.20.210).
I also ran Exchange BPA - No problems noted. Any help on this would be greatly appreciated.
Thank you,
Frank
FrankYou have your answer: spam filtering. The clue was 'no NDR', when emails disappear without trace, it is almost always because something has designated them 'spam'.
You can't really do much about this unless you know why the emails are being flagged. Possibly your contact can help here, most anti-spam systems do explain why they mark down particular emails. Spam filters use many criteria, some of them even rational.
I once found that a client's emails were disappearing because of a picture used as a signature: it was a .jpg file, and the problem was solved by substituting a .png file. That's one hint: do not include files which can carry malware, or at least not unless
zipped, preferably with a password. Unfortunately, there are not many file types which cannot include malware. Outlook drops broad hints if you try to attach certain files, and suggests you might wish to reconsider.
Another minus is the use of HTML email, which is unfortunately almost universal now. Plain text emails are less likely to get the thumbs-down, but I'm not sure if the MS webmail can even originate plain text emails. Obviously, there are certain words to
be avoided, and I won't mention any here, but many apparently innocent financial and entrepreneurial words will bump up the spam score. Multiple exclamation marks, lots of upper case, the list is endless. I was once trying to help a client's salesman set up
a VPN connection, and had my email killed by Yahoo because it contained a URL and some other networking information.
The only really certain way to find out why emails have been dropped is to ask the admin of the recipient, or of any smarthost used on the way. You do have to hope that they actually have an admin to ask...
Joe
Maybe you are looking for
-
Playbook won't charge or turn on
I have read through many post here about this problem and nothing is working for me. I have not used my playbook for a while (it is an older model- I've had it 4 years), and when I plug it in I get the red battery with a lightening bolt through it t
-
Has anyone had a problem with their replacement nano?
My replacement nano came with a letter saying that it was covered by a 90 day warranty. Yesterday when I thought I had a problem with it I submitted a request for support and included a scan of the letter. I just got a reply saying that my warranty i
-
i had a problem in my ipad 3.in the main screen it shows ' ipad is disabled'connect to the itunes'.what can i do for it.pls help me!
-
Forcing output via VGA on a MBP
So I have four monitors hooked up via an active VGA splitter, only problem is that while my MBP recognizes the VGA adapter (screen fades blue for a second) it refuses to actually output any image to the VGA port.
-
IPhone/iPad landscape orientation: switch view side without portrait
Hi, does someone know if it is now possible (with the use of AIR 2.6) to use the autorotation feature when having a landscape app and changing the device orientation to portrait so that nothing happens, but when turning the app around to the other la