Mail refuses to use current SMTP

Mail Version 2.0.7
Problem: With SOME but NOT all messages Mail refuses to use currently active SMTP server. When the problem occurs, on some occasions, Mail provides a choice of available SMTP servers, ( I have to manually change servers for each message for the rest of the session but messages are sent OK). On other occasions it only provides the inapropriate server as available FOR THIS MESSAGE ONLY. Other messages -in the same session- can be posted OK (mail uses the active server).
This is an IMAP account; there are 2 SMTP severs on the list (corresponding to 2 locations I send e-mail from) both SMPT's are configured fine. port is NOT blocked. (I have 3 other accounts on the account list but these are "not active")
Tried: removing extra SMTP servers from the list; Re starting Mail; restarting Mac; re submitting mail etc, etc. The problem is address specific (always with the same address) BUT this address used in another computer is working fine.

Intriguing problem indeed.
Is there any commonality in the email addresses that poses these problems?
Just to see if I now read you correctly:
When you send from work to address A, it works.
When taking the powerbook home and send now from a different SMTP, but also to address A, it won't let you do it. And to make it more puzzling, this is only with some addresses, not with all?

Similar Messages

Mail refuses to use outgoing SMTP servers

I have two accounts in my mail, one for my ISP, the other is my .Mac account. For some reason mail refuses to use the correct SMTP servers. The setup is correct, and the problem just cropped up one day.
How do I blow them out and start from scratch?

Hmmm, sounds like you have some Disk problems.
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Please report errors.

[EWS][C#] Seding mail from Gmail using external SMTP server to map emails to corporate Exchange server (using EWS only)

I'm using my Gmail account as a aggregator for many email accounts and for sending using my customers SMTP servers.
Unfortunately one of my clients doesn't support sending emails from public internet by SMTP.
The only way to send emails is using their OWA or EWS and Gmail support SMTP only :-(
My idea is to customize any simple SMTP server in C# (ex.
http://www.lumisoft.ee/lswww/eng/products/mail_server/mail_index_eng.aspx?type=download) and add feature "SendMailByEWS"
I have working demo for sending simple mail, but this solution is not complex. There are many pitfalls, like mail with CC:,BCC, attachments, parsing raw email, etc.
Any ideas to simply solve this issue?
Thank you.

I have a similar problem. I have two Exchange email account:
1. Gmail (default)
2. Microsoft Exchange (work)
From my iPhone, I frequently email myself articles from other applications that I want to follow-up later. After upgrading to iOS7, when I type my Gmail ID in the 'To' field, the 'From' field automatially changes from my Gmail account to my work account. I didn't catch this the first few times this happened and was wondering what was going on as my emails started being sent from my work account.
Workaround for this case: Type in your To address first and then re-select the account to send From.
This is annoying and I hope Apple restores normal behavior.

How to bypass proxy when trying to send a mail using javamail smtp

Hi,
I am trying to make a servlet send a mail using javamail smtp protocol on port 25 but i m not able to send getting an exception, i suspect proxy is blocking, so any idea anyone how bypass a proxy.

And if it does turn out that there's a proxy server blocking access to your target SMTP server, the best way to deal with that is to discuss the issue with the person responsible for your network configuration.

Using OS 10-6-8. For no apparent reason, mail refused to open and the icon in the dock changed and the application has disappeared except in iWork. Under Iwork, the message says: "yoou tried to open Mail version 4.5 (1084/1085) in: /Applications/iWork '06

Using OS 10-6-8. For no apparent reason, mail refused to open, the icon in the dock changed appearance and the application has disappeared except in iWork. Under Iwork, the message says: "you tried to open Mail version 4.5 (1084/1085) in: /Applications/iWork '06. Using OS 10-6-8. It can't be used on thius version of Mac OS X. Try opening the version of Mail located in the Applications folder..." How do I get back to mail and retrieve my existing messages?

You should consider downloading the 10.6.8 combo updater and applying it again.
http://support.apple.com/kb/DL1399
Pondini has a great page about upgrading.
http://pondini.org/OSX/Combo.html

How do I set up a POP mail account to use a different outgoing SMTP port?

How do I set up a POP mail account to use a different outgoing SMTP port? on Maverick O/Sx. Cannot see option to use 2 different ports?

In Mail>Preferences>Accounts tab>Account Information tab - from the 'Outgoing Mail Server (SMTP):' drop-down menu select 'Edit SMTP Server List...', choose the server you want to edit from those listed, click on the Advanced tab. Does that give you the option you're after?

What port number is used for SMTP outgoing mail with AOL?

I inadvertently changed the port number for SMTP outgoing mail of AOL. What port number should I use?

Yahoo and Gmail support should be able to help you.
Not related to Firefox support, web mail doesn't use POP or SMTP protocols which is what email clients such as Thunderbird use for communicating with email servers.

One e-mail address but using multiple servers

Hello all, I am hoping to get some expert help here and greatly appreciate anything you can give me. I have one e-mail address that I use for school, but have one outgoing server when I am specifically on the school's network and another outgoing server to use when I am on my network at home.
Is there a way to set up Mail to automatically use the appropriate outgoing server for each network? For example, can I set it up to automatically use my school's outgoing server when I am on the school's network and to use my home ISP server when I am on my home wireless network? Also, I do not know if it matters, but I use both a LAN and wireless networks while at school, depending on whether I am in my office or in a classroom.
One more thing, I also use coffee shops a lot, ones that have wifi. Is there a way to train Mail to use my school outgoing server's whenever I am using those networks?
P.S. When I was using my XP laptop, I had similar issues. I am just hoping that Mail is smarter than Outlook. Thanks!
A recent newbie to Mac and OS X who is loving it! Never going back!

Slack,
simple solution for that;
make two accounts in Mail / Preferences
in the description, name one home, the other work
email address canbe the same.
In the outgoing mail server settings, set one for home, the other for work
Each time you compose a new mail, you get a dropdown menu after Accounts that will let you choose which account you are sending from.
When your network preference is set to Automatic, it will pick up the wireless network at your current location. Instructions as above for new mails.
This will depend on your school network if it allows you to send from their smtp server when you are not actually connected to their network.

MAIL - ERROR message using aapt sending mail

I am using Apple Mail with an aapt.net.au email account. When I am at home using my wireless internet connection through an ADSL landline I have no problems. However, when I travel and make use of others wireless connections eg at an airport or at my friends house, I can receive and download email but I get a
"server "mail.aapt.net.au" refused to allow a connection on port 25"
error message when I try to send emails Aapt seem to have no idea what is happening.
Does anyone out there in Mac land have any ideas.
I use a Macbook when travelling.

Hi Tim, it's a Port/Authentication issue when sending through another ISP.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
* The SMTP port for outbound emails is 25 or 2525 (465 or 587 if you want to use secured SMTP)

Mail refuses to get new mail.

Mail refuses to get new mail. (Imac 10.9.5, Mail 7.3. ) Connection doc shows wheels to all my accounts spinning (IMap and POP). Activity cited Mail was trying to connect to Icloud. Evidently stuck there. This is just one problem in a succession of many with the Mail program ever since I upgraded to 10.9.5, but it is the worst so far. Restarting doesn't seem to fix it. Any suggestions?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Either there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010

I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?

Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang

Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run ...

Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance. The computer is upgraded (uninstalled first)
from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).
(Links removed to remediations I've tried)
Made no difference what so ever and the messages continue. What's next?
I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead. I
was asked some additional questions ing the other forum regarding the problem:
Are you able to send mails from other applications like Word or Excel?
NO
Is the PC connected to any Domain/Server? YES
Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
2013 forum and now this forum)
Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
NO
Also check if the Lync add-in is enabled in Outlook.
Start Outlook
Click the File tab.
Go to Options.
Click Add-ins.
Check if the Lync add-in is enabled. YES
My last posting in the other forum contained the following additional information regarding our problem:
As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference.
We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
Other processes that have Outlook plugins may also be the parent of the message popup (third party applications).
Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected.
It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
a follow up error message concerning lack of MAPI enabled e-mail.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Not able to create new e-mail on N8 using Mail for...

Not able to create new e-mail on N8 using Mail for Exchange.
Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
When creating reply on mail the application crashes. When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
Any idea why creating mail is not possible?
Regards,
Joris

problem is known
more info there:
/t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
there is little workaround aslo.

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

Can I set up a Non .mac Email Pop mail client Alias for sending SMTP mail?

I have a yahoo.com POP mail account - [email protected] When I'm lgged into Yahoo mail, this account can receive and send mail from serveral aliases - [email protected], [email protected], etc.
Using Tiger's mail.app, I can log into the Yahoo smtp server and get all my mail, including mail to the alias names.
I would like to be able to reply from my Mac's mail.app account, using one of the aliases, instead of my POP account name. In other words, I'd like the From field be listed as "[email protected]" and not "[email protected]"
In mail.app (v2.1) is there any way to do this?
Alan Sampson' suggestion doesn't work - when I set the From field to the alias name, it looks like mail tries to login to the yahoo SMTP server under the alias, and it gets rejected.
( - see http://discussions.apple.com/thread.jspa?messageID=2603372&#2603372 )
Go to Mail > Preferences > Accounts and under the Account Information tab for the primary email account preferences, enter all alias email addresses in the Email Address field for the account separate by a comma.
[email protected], [email protected], [email protected]
MacMini - 1.42 Mac OS X (10.4.7)
MacMini - 1.42 Mac OS X (10.4.6)
MacMini - 1.42 Mac OS X (10.4.7)

If Yahoo allows this, it should work. Open Mail Help, type alias in the search box, and read the article titled Adding multiple email alias addresses to an account. Could it be that you're trying to put the aliases in the wrong field (i.e. User Name rather than Email Address)? Or maybe it's Yahoo's SMTP server that doesn't allow you to do this?

Mail refuses to use current SMTP

Similar Messages

Maybe you are looking for