Mail Rules Problem (Auto-Respond Not Working)

Hello there, I just purchased a 20" iMac and Leopard has been great so far. The only problem I've run in is that Mail Rules does not auto-respond but rather it will just send back the same thing that it received. Keep in mind i've been a Tiger user for 1 year so the settings shouldn't be an issue. Anyways here is how i have it setup:
IF (ANY):
ACCOUNTS
REPLY TO MESSAGE: (REPLY MESSAGE TEXT) =this text is not showing up in the auto-respond emails.
Regard,
Peter

I'm another one with the same problem since I upgraded to Leopard.
My auto-reply rules no longer work.
This is really going to be a pain as I am on vacation starting tomorrow through the Thanksgiving holiday and now I have no way of communicating this with clients sending me emails.
I also did a bug report. Hopefully this gets fixed FAST!!

Similar Messages

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

Auto brightness not working on iPhone 5?

On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
Anyone else have this problem of the auto brightness not working?

There is nothing wrong with the auto brightness.
When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
If you have the slider too high the brightness cant reduce because youre not letting it.
Set your brightness at about 25% and you'll see what I mean.

Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

Mail on my iphone is not working!

Mail on my iphone is not working. everytime i try to log in, it says "unable to verify hotmail account" or it says that my password is wrong, even when i type it correctly. what do i do?

I'm having the same problem so i went to the Apple Store to speak to someone. 4 members of staff had a look and weren't able to fix it. I was told by one member of staff that you can't sync "free" hotmail accounts to the iphone 4s.... only "paid for" accounts. Surely that's no true. Any advise would be much appreciated. Thanks.

HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Exchange mail after iOS 8 upgrade not working

exchange mail after iOS 8 upgrade not working.
I can not get email from my exchange account.
Any suggestion?

Just had this issue. I turned WIFI off and it connected fine. Then turned WIFI back on and working as always.
It had something to do with the WIFI conflicting with the exchange server.

Rule based ATP is not working for Components

Hi All,
Our requirement is to do availability check through APO for Sales order created in ECC,so we are using gATP.
Requirement: We are creating salesorder for BOM header (Sales BOM) and avaialbility check should happen for components i.e. Product avalaibility & Rule based substitution.
Issue: Product availiabilty is working for components but rules based substituion is working, mean Rules are not getting determind for components.
Settings:
- Header doesnot exist in APO and compnents do exist in APO
- Availability check is not enabled for header item category and enabled for Item category for components
- Rules have been created for Components in APO
- Rule base ATP is activated in Check instructions
We have also tried MATP for this i.e. PPM created in APO but still didn't get the desired result.
If we create salesorder for the component material directly then Rule based ATP is happening, so for components Rule based ATP is not working.
How do we enable enable Rulesbased ATP for components, i mean is there any different way to do the same.
Thanks for help.
Regards,
Jagadeesh

Hi Jagdeesh,
If you are creating BOM in ECC and CIFing PPM of FG/Header material to APO, I think you need to CIF Header material, too, with material integration model.
Please include header material in you integration models for material, SO and ATP check as well.
For component availability check, you can use MATP; but for MATP, FG should be in APO. You need not to CIF any receipts of FG (stock, planned orders, POs etc), so that MATP will be triggered directly. Then maintaining Rules for RMs will enable to select available RMs according to the rule created.
Regards,
Bipin

AUto attendant not working

Auto attendant not working .....
If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
Is there Option to set
Please press the extension which you want to Call ...
Eg: if i press 222 that time it should ring the 222 extension
Please help this is the first time i am working on this stuff
If i chnage the scrpt file then i can hear auto attendant not initiazlised.. please find the attched screen shot and back file for more details.
Best Regards
Shabeel

Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
Check also the Calling Seach Space
GW should be able to reach CTI Route Point and CTI ports partition.
If you try other extension it works fine?

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.
Thanks in advance for any help!

For all things Time Machine see Pondini's excellent information here...
http://pondini.org/OSX/Home.html
Start at Troubleshooting.

I have updated my BRE with new rule but it is not working.

Hi All,
I have got a requirement to add one more rule into my existing BRE.
Below are the points that I followed :
1).Firstly, I created the new version for my BRE , and added my rule in that.
2). Then I un-deployed the previous version of BRE and Deployed its new version.
3). I did restarted host instances and Rule engine service also.
3). Now, when I am testing the sample consisting of previous rule then it is executing,
But on the other hand when i am testing the sample based on my new rule then BRE is not working.
If BRE is Executing with previous rule then i believe it is working,
Then why it is not working for my new Rule .
4). When i am testing my policy then it is also working well enough .
Note : The Schema path is also correct ,
Any help and suggestion will be appreciated
Kind Regards
Rishi Gaur

Hi Shankycheil,
1). My policy version 1.0 was having 10 rules.
2). Then i copied version 1.0 and added it to my new version 1.1 .
3). Than i added my rule to it only.
After all this I Undeploy version 1.0 and deployed my new version 1.1.
In Admin console I am getting error like you mentioned somewhere about policy not found?

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

hi!
I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

Hi,
See this Link on Apple ID:
http://support.apple.com/kb/HE37
Go to the Very Last Section "How do I verify my Apple ID by email?
Cheers,

Mail Rules Problem (Auto-Respond Not Working)

Similar Messages

Maybe you are looking for