Mail sender adapter with Variable Transport Binding doesn't work

Hi,
we have PI/700 SP7.
An external partner sends an email with one attachment (a simple csv file).
I take "PayloadSwapBean" (with swap.keyName = payload-name) to get the attachment.
Both, the Adapter-Specific Message Attributes indicator and the Variable Transport Binding indicator are set.
I set the mail package format indicator too.
What I need is the sender, receiver and subject of the mail plus the attachment.
Unfortunately it is not possible to read in the email with this configuration - I get an error.
If I unset the Variable Transport Binding indicator - I get the email but without "sender, receiver and subject" in "SHeaderFROM, SHeaderTO, SHeaderSubject". The "mail package" is overwritten by the attachment.
Is it a problem of the namespace "http://sap.com/xi/XI/System/Mail"?
Do I have to define this namespace or do I have to import a content (SAP BASE 700, SP7 is imported)?
Please help...
Regards
Wolfgang

Hi Wolfgang,
I hope it is not due to the namespace.
This might help you.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Need some Guide regarding Configuration of Sender Mail Adapters....
Regards
Agasthuri Doss
Message was edited by: Agasthuri Doss Baladandapani

Similar Messages

Mail Sender Adapter with IMAPS

Hi,
I had a Mail Sender Adapter running fine with imap. Our Email Server has changed now to secure protocol. Therefore I need to use the Mail Sender Adapter with IMAPS. If I use imaps://<mailserver>:993 in the channel configuration the Mail Adapter aborts with error "not initialized; mail agent null" and in the default trace it says "failed to initialize the channel: java.io.IOException: illegal protocol for XMBIMAPInitiator: imaps#". If I configure the Mail Adapter with imap://<mailserver>:993 the Mail Adapter starts and says "running", but it does not poll the postbox. In the security.log file there is a warning about untrusted certificates "com.sap.security.core.server.https.SecureConnectionFactory#Plain###Attempting to create outgoing ssl connection without trusted certificates#". I did already import the (CA) Certifcate of the mailserver with key storage service of J2EE Engine in the Trusted area and I configured the J2EE Engine for using SSL (the https access to the J2EE Engine works fine).
What is still missing in XI 3.0 (SP12)? I can access the postbox securely with e.g. Thunderbird using port 993.
Has anyone an idea or had already this issue?
Thanks for any help in advance.
Peter

Hi Sebastian ,
The Mail sender --IMAPS , did it solve your issue because i fcae the same kind of Error in Communication Channel :
exception caught during processing mail message; java.io.IOException: unable to create a socket
Mail sender CC:imaps://NZxxx.dknz.nzcorp.net:993/NZDKINVOICES
-Login Credentials is correct.
-Defualt XI Paramters are correct
-Mail Server is the right one
-Tried in command prompt , N:/telnet NZxxx.dznz.corp.net 143 , but i get response : Could not open connection to the host, on port 143 .Connection Failed
Could you kindly assist
Thanks,
Vara

Mail Sender Adapter with multiple sMIME attachments

Hi!
I 'm using XI 3.0 SP 15.
I have problems with my Mail-Sender-Adapter.
The mails, I fetch, contain a certificate and multiple xml-attachments. The xml's represent an IDOC-structure (INVOIC.INVOIC02).
The task is to first check the certificate, and then to send each of the XML attachments separately to an SAP-System.
1) We have twelve partner which use this e-Invoicing interface. How do I administer the certificates and do I have to create for each partner a "Sendervereinbarung"?
2)
The second problem is, that I have multiple payloads which have to be processed separately. How can this be done?
kind regards and thanks a lot for your help
MArtin

As we have multiple xml-attachments, I guess we have a major problem anyway.
I guess Certificate verification in the sebder agreement is done after the Module Processing of the email-adapter isn't it?
Due to the multiple attachments we have to write a customer specific Module for the email-adapter anyway.
I guess the only way is that the module validates the certificate against the J2EE KeyStore and then extracts the various xml attachments to a file share.
A File sender adapter then polls the file share and the sender aggreement / receiver agreement /mapping ... process starts.
The only question is if the file adapter works also without a sender agreement, so that the xml's are stored on the file share
Do you have an idea, if this works? or do you see any alternatives?
thanks alot for your help!!
MArtin

Mail Sender Adapter for Exchange 2007 IMAPS account

Hi everybody,
I have the following todo:
I configured a Mail Sender Adapter that is supposed to fetch mails from an IMAP account.
The mails contain text files with data to be processed by XI 3.0 SP 22.
The mail server is Exchange 2007 and requires IMAPS. IMAP is not enough. I read the notes
- 893590 - XI 3.0 Mail sender adapter with IMAP or POP with SSL problem
- 856599 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 Mail Adapter
and configured the sender apapter as follows:
URL: imaps://<ip address>/owa
Authentication method: Plain
User: <domain>\<user>
Password: topsecret
Poll Interval: 5
The first challenge is to setup the adapter with SSL. To do so, I added the Exchange server's
root SSL certificate in the default truststore service-ssl via the KeyStorage service.
This is necessary, as far as I know, to successfully validate the Exchange server's trusted
certifacate which is being transfered to XI during SSL handshake.
Since the communication channel in RWB is in status error with following message:
mail client job stopped completly
exception caught during processing mail message; java.io.IOException: invalid IMAP status response; not finding * STATUS, but 001I NO owa doesn't exist.
mail client job scheduled,
I do not know how to setup SSL for IMAPS. I successfully tested a PING to the Exchange server.
Are there already experiences with Exchange 2007?
What I have to do to fetch mails from an Exchange 2007 IMAPS folder/account with a Mail Sender Adapter?
Kind regards,
Andreas

Hi,
It should be imap and not imaps.
You can try imap://xxx.xxx.de:993/Inbox
Make sure that port 993 is correct. If you have doubt, then you may try 143 which is default port instead of 993 in the above url.
regards,
ganesh.

Error when using Variable Transport Binding in Sender Mail Adapter

Hi,
I am using the Sender Mail Adapter to receive an email, convert the attached tab delimited text file into xml and map it to an IDOC.
I am using PayloadSwapBean and MessageTransformBean in order to do this, and this all works perfectly.
I am now trying to access the Adapter Specific Message Attributes to retrieve the SHeaderFROM attribute from the message and map it to a field in the idoc.
However when I check the "Variable Transport Binding" option in the Advanced tab of the mail adapter, the message no longer goes through to SXMB_MONI and I get the following error in the Java logs.
Transmitting the message to endpoint http://sapserver:53500/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during parsing of SOAP header.
Any ideas why this is happening?
Thanks,
Brad

Hi Luciana,
Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
Good luck!
Cheers,
Brad

Variable Transport Binding - Soap Sender

Hello all,
I'm trying to retrieve a parameter from the HTTP header of a SOAP request.
I have created a SOAP sender communication channel, checked "Set Adapter-Specific Message Attributes" and "Variable Transport Binding", and entered the name of the parameter in Variable Header (XHeaderName1).
When I send the SOAP request, DynamicConfiguration exists with all standard parameters, but there is no XHeaderName1...
If I try the same with sender HTTP adapter, it works fine.
In the other way, if the dynamic configuration parameter XHeaderName1 already exists, and I try to add it in a HTTP header parameter in a receiver SOAP CC, that works.
Does somebody know why this doesn't work in the sender one?
Thanks,
Greg
PS: I'm using PI7.0 SP14

Hello,
I can see in dynamic configuration, with the namespace http://sap.com/xi/XI/System/SOAP, the standard HTTP parameters like SServerHost, SRemoteUser, etc...
But if I add a HTTP header parameter in the SOAP request, and I try to retrieve it with the SOAP sender CC, the parameter is not added in the dynamic configuration. If the name of the added HTTP header parameter is "TestParam", I put "TestParam" in the XHeaderName1 field of the sender CC, but the value is not added in the dynamic configuration. This is my problem.
Thanks,
Greg

SOAP Use Adapter-Specific Message Properties and Variable Transport Binding

Hi Friends,
   I am new to use to Soap Adapter. Please help me out bellow doubts.
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
   2. Where exactly we r using below parameters.
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Thanks&Regards
G.Bhanuprakash

Hi,
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
SAP Help says both are needed to be checked when you want to process adapter attributes
Configuring the Receiver SOAP Adapter - SAP NetWeaver Exchange Infrastructure - SAP Library
These attributes can be get/set using dynamic configuration and their technical names are what you have pasted:
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Remote User - the username used to send a message to the adapter engine using SOAP
Remote Host - hostname which the remote user used
SOAP Action - SOAP Action of the XI webservice (sender) / SOAP Action of the receiver webservice
Variable Headers are additional key-value pairs in the HTTP Header that could be accessed in the XI Header using dynamic configuration. The limit is only three though.
Regards,
Mark

Transport protocol SMTP in Mail Sender Adapter

Hi Experts,
How can I use SMTP as the Transport Protocol instead of POP3 / IMAP4 protocols in the Mail Sender Adapter.
I am referring Note 856599 - FAQ Mail Adapter.pdf but not getting a l
" 9. Other Questions
Q: How can I configure my sender channel for my SMTP server?
A: You can specify your SMTP server as URL. For example, if your
server is called host, your URL should look like
smtp://host:port/ "
Regards,
Shobhit

Hi
How can I use SMTP as the Transport Protocol instead of POP3 / IMAP4 protocols in the Mail Sender Adapter.
In case of sending mail from XI you can use SMTP. To read mails you need POP3
IMAP works for both.
Yes in XI mail adapter receiver type. URL field you can use URL like
SMTP://Mailhost.com
Refer this
The specified item was not found.
Thanks
Gaurav

IMAP-Mail sender adapter handling with read messages in mailbox

Hi,
(PI 7.0)
we have a "funny" situation:
We are using imap-mail-sender adapter polling a mailbox.
Sometimes there are read messages in mailbox so the adapter cannot read these messages.
When we sort all read messages and we mark e.g. the second message in list as not read, the adapter polls fetch the first (already read) message and afterwards the not-read message and afterwards no other message is read.
I think this behaviour is wrong because pi should not handle an already read meassage.
Does anybody know this problem?
Or is it a problem of the mail-server (Exchange 2003)?
Thanx and regards
Wolfgang

Hi,
thanx for your answer.
The default behaviour of imap is "only fetching unread message" (s. FAQ of mail adapter)...
The mail sender channel with IMAP4 fetches only the unread messages from the specified mail box in the order they are stored. Therefore, please make sure that you have some unread messages in the top of the list (if ordered by most recent on top). After a polling cycle, you can look at the status of this channel at the adapter's monitor. This should show any error if the messages are not processed correctly. Once the messages are read but not processed correctly, they remain in the mail box but are not read in the subsequent polling cycle. You must correct the problem and delete these messages using your mail client program or reset them as unread so that they can be resend.
In our example the adapter fetchs read messages too (till the first unread one) - and this is wrong (i think so!?).
But I dont know if its a MS-Exchange problem.
Regards
Wolfgang
Edited by: Wolfgang Hummel on Oct 7, 2009 12:20 PM
Edited by: Wolfgang Hummel on Oct 7, 2009 12:21 PM

How can i read only .txt file and skip other files in Mail Sender Adapter ?

Hi Friends ,
 I am working on scenario like , I have to read an mail attachement and send the data to R3.
 It is working fine if only the .txt file comes.
 Some times ,html files also coming along with that .txt files. That time my Mail adapter fails to read the .txt file.
 I am using PayLoadSwap Bean and MessageTransformBean to swap and send the attachment as payload .
 Michal as told to write the Adapter module to skip the files .But i am not ware of the adapter moduel . If any blogs is there for this kind of scenarios please give me the link.
 Otherwise , please tell me how to write adapter module for Mail Sender Adapter?
 How to download the following
 newest patch of XI ADAPTER FRAMEWORK CORE 3.0
from SAP Service Marketplace. Open the file with WinZip and extract the following
SDAs:
aii_af_lib.sda, aii_af_svc.sda
aii_af_cpa_svc.sda
 I have searche in servive market place .But i couldn't find that . Can you please provide me the link to download the above .
 If any other suggestions other than this please let me know.
Regards.,
V.Rangarajan

=P
Dude, netiquette. Messages like "i need this now! Do it!" are really offensive and no one here is being payed to answer anyone's questions. We're here because we like to contribute to the community.
Anyway, in your case, just perform some search on how you could filter the files that are attached to the message. The sample module is just an example, you'll have to implement your own. Tips would be to query the filename of the attachments (or maybe content type) and for the ones which are not text, remove them.
Regards,
Henrique.

Mail Sender Adapter - Attachment Handling

Hello,
I 'm using XI 3.0 SP 14.
I have problems with my Mail-Sender-Adapter.
The mails, I fetch, have an xml-attachment which
represents an IDOC-structure (ORDERS.ORDERS05).
I want to sent this attachment as payload to an SAP-System.
The problem is now, that I have 2 Payloads (SXMB_MONI).
One for the normal email-body and one for my original
xml-attachment. See below:
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MailMessage</SAP:Name>
<SAP:Description>mail message</SAP:Description>
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MailAttachment-1</SAP:Name>
<SAP:Description>mail attachment</SAP:Description>
<SAP:Type>ApplicationAttachment</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
The XI Runtime Workbench (SXMB_MONI) takes (in my case)
the wrong one (email-body-attachment) and gives me
an parsing error. (Error occurs at my IDOC-Receiver-Adapter)
Now my question:
Can I remove the email-body-attachment, so that
the further processing works with my xml-attachment?
Or how can I resolve my problem.
best regards
Marcel Reichert

Hi Marcel,
use the PayloadSwapBean module to get the attachment as main payload.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
As parameters use:
swap.keyName = payload-name
swap.keyValue = MailAttachment-1
Regards
Stefan

MAIL Sender adapter going in to error

Hello Experts ,
We have configured one mail sender adpater with a custom module to read the attachements in the email message. This was working fine before.
We recently had a restart of the PI servers. After that the channel is going in to error. The first error as per NWA logs is :
failed to call the adapter engine; caused by javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.mail.ejb.XIMailAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.mail.ejb.XIMailAdapterBean@243be1e1 for bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: javax.ejb.CreateException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Failed to load messages into Queue AFWSend from database. Reason: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection. Reason: the thread of component "ejbContexts/sap.com/com.sap.aii.adapter.mail.app/com.sap.aii.adapter.mail.ejb.jar/XIMailAdapterBean" in application "sap.com/com.sap.aii.adapter.mail.app" is currently associated with a restricted resource set and it is not allowed to get connection within it.
After that whenever it is trying to process a message its throwing the below error :
exception caught during processing mail message [588]com.sap.aii.af.lib.mp.module.ModuleException
Has anybody faced thsi error before? Please help!!!
Thanks

Hi VR
Have you tried swapping by Payload name?
Please try it out with the following configuration, and remove any extra lines - there are duplicate key names and values in your configuration.
You should be able to see the successfully swap by payload name in the audit log as shown below.
Rgds
Eng Swee

Mail sender adapter POP server not configured for URL access

Hi Experts,
I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
_1. When I use pop://Fully qualified host name/
_Error: exception caught during processing mail message; java.net.UnknownHostException
_2. When I use pop://IP address of host/
_Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
Can someone please help.
Thanks,
Shobhit
Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

Hi Shobhit
Check with these notes:
804102
xi 3.0 mail adapter with pop3 user authentication problem
810238
XI 3.0 Mail Adapter for POP3 may not report some errors
also check mailserver security settings ...
Connection refused occures when XI cannot connect
in most cases so try checking it again , maybe some ports are not opend on the firewall
Thanks
Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

Mail sender adapter: date

Hi all
I need to fetch the mail date during the processing with mail sender adapter. I can't find a relevant field in the Adapter-Specific Message Attributes (SHeaderFROM, SHeaderTO etc.).
Do you know how to fetch the mail date during the processing of a mail via mail sender adapter?
Thx
Tobias

Thanks for the response.
The problem is that the mail is perhaps not processed when it is created. For example: the mail is created on 01th of april and sent to the mailbox. But the PI mail sender adapter is fetching the mail on 02nd of april. Due to the reason I can't use current date - I need the original sending date of the mail.
Thx

Problem of encoding for mail sender adapter

Hello, everyone.
I have faced the problem of mail sender adapter.
When someone send message with any content encoding (even UTF-8) and 8bit content type encoding the XI mail adapter corrupt special and foreign symbols. I checked the message for correct structure and encoding with tpcgw utility and it was fine. For example (this is what I can see in tcpgw)
==== Response ====
+OK
+OK Password required for user itra_xi
+OK XXXXX maildrop has 1 messages (2048 octets)
+OK 1 2048
+OK
+OK 1459 octets
Return-path:
Received: from (port=20091 helo=XXXX)
     by mx76.mail.ru with psmtp
     id 1O7UoW-0003I4-00
     for XXXXXX; Thu, 29 Apr 2010 18:34:04 +0400
Message-ID:
Subject: Message 29 4
Date: Thu, 29 Apr 2010 17:33:43 +0300
MIME-Version: 1.0
Content-Type: multipart/alternative;
     boundary="----=_NextPart_000_0018_01CAE7C2.1D0BBA60"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2900.5843
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
X-Spam: Not detected
X-Mras: Ok
This is a multi-part message in MIME format.
=_NextPart_000_0018_01CAE7C2.1D0BBA60
Content-Type: text/plain;
     charset="utf-8"
Content-Transfer-Encoding: 8bit
Test
Тест
And after processing by XI mail adapter I have this payload (XIPAYLOAD mode using mail package)
Test
├É┬ó├É┬╡├æ┬ü├æ┬é
The same situation with using mail package in xml document.
Any suggestions how this can be corrected?

I switched UTF-8 encoding during displaying of http content in tcpgw utility and all other mail clients detect it as UTF-8 and work fine. Also this problem occurs with different mail clients that are senders of the message. So it seems adapter takes each byte of cyrillic symbol (each from two) and represents it as individual symbol.
Correct me if I'm wrong. Maybe there is some configuration somewhere allowing to correct or maybe it's possible to write module to correct.. but it's quite complicated to split correct and incorrect symbols.

Mail sender adapter with Variable Transport Binding doesn't work

Similar Messages

Maybe you are looking for