Mail sender client with attachments

I am trying to find examples on how to write a mail sender that includes attachments. I already have the mail sender built (basic to, from, subject, data), but I don't know how to implement the attachment part (MIME).
I do not want to use the JavaMail API.

So you're writing an implementation of the mail RFCs from scratch? If so then the RFCs themselves will tell you what to do. Or are you using some other tool to support this work? If so, what?

Similar Messages

Outlook 2010 wont send emails with attachments

Hello
I was starting to write the question when we found out what the problem was. So I thought I would share our resolution in here, in case someone fall in the same issue.
One of my user with Outlook 2010 cannot send emails with attachments of some size. +-50 kb files works fine.
But when we try a file of 1mb, the mail goes in the Outbox, Exchange status swith from Connected to Disconnected and the email stay there.
The user is in a remote location, connected through VPN with the network where the Exchange 2013 server is
Here is what I did:
1. Re-create Outlook profile: wont work
2. Re-create Windows profile: wont work
3. Check ip settings: fine
4. Try in OWA: wont work
5. Look at Exchange settings for outgoing email size: 10mb
6. Load my user's Outlook profile on another LAN: works fine
That last point made me thought about a potential problem on the remote user's lan. So I did
7. Check VPN config between the remote site and IT site: fine
After googling the problem, I found that website (http://community.spiceworks.com/topic/396793-outlook-2010-client-suddenly-showing-disconnected-from-2013-exchange-server) that suggest to change the DNS setting on the client. However, the DHCP of my remote
user was the router itself, which is giving a DC as primary DNS, and ISP DNS as secondary. I changed the secondary DNS for another DC in our organization, and guess what? Voila! Problem is gone!
Thinking about it that make not much sense, as the primary DNS is always up the secondary shouldn't be queried. But that's what resolved our problem.
Hope it helps someone!
Martin

Hi Martin,
Thanks for your sharing:)
If you have any question about Microsoft Office, welcome to contact us and feel free to post your issue on Office forum.
Regards,
Winnie Liang
TechNet Community Support

How to send Email with attachments

Hi im Trying to send a file as attachment using EMail Activity operator.
Can we do it using Email activity? If yes, then how can we do it? If no, then please tell me about any other method using which i can send a email with attachments.
Regards
Vibhuti

Better late than never, a comprehensive demo on the topic:
REM
REM maildemo.sql - A PL/SQL package to demonstrate how to use the UTL_SMTP
REM package to send emails in ASCII and non-ASCII character sets, emails
REM with text or binary attachments.
REM
REM Note: this package relies on the UTL_ENCODE PL/SQL package in Oracle 9i.
CREATE OR REPLACE PACKAGE demo_mail IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host   VARCHAR2(256) := 'smtp-server.some-company.com';
smtp_port   PLS_INTEGER   := 25;
smtp_domain VARCHAR2(256) := 'some-company.com';
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID   CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY        CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY   CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
                                              utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
                                                  BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER   := 76 / 4 * 3;
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
--   someone@some-domain
--   "Someone at some domain" <someone@some-domain>
--   Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender     IN VARCHAR2,
           recipients IN VARCHAR2,
           subject    IN VARCHAR2,
           message    IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender     IN VARCHAR2,
                recipients IN VARCHAR2,
                subject    IN VARCHAR2,
                mime_type IN VARCHAR2    DEFAULT 'text/plain',
                priority   IN PLS_INTEGER DEFAULT NULL)
                RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN            VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn    IN OUT NOCOPY utl_smtp.connection,
                message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn         IN OUT NOCOPY utl_smtp.connection,
               data         IN VARCHAR2,
               mime_type    IN VARCHAR2 DEFAULT 'text/plain',
               inline       IN BOOLEAN DEFAULT TRUE,
               filename     IN VARCHAR2 DEFAULT NULL,
                  last         IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn         IN OUT NOCOPY utl_smtp.connection,
                 data         IN RAW,
                 mime_type    IN VARCHAR2 DEFAULT 'application/octet',
                 inline       IN BOOLEAN DEFAULT TRUE,
                 filename     IN VARCHAR2 DEFAULT NULL,
                 last         IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn         IN OUT NOCOPY utl_smtp.connection,
                    mime_type    IN VARCHAR2 DEFAULT 'text/plain',
                    inline       IN BOOLEAN DEFAULT TRUE,
                    filename     IN VARCHAR2 DEFAULT NULL,
                    transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                  last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn       IN OUT NOCOPY utl_smtp.connection,
                      sender     IN VARCHAR2,
                      recipients IN VARCHAR2,
                      subject    IN VARCHAR2,
                      mime_type IN VARCHAR2 DEFAULT 'text/plain',
                      priority   IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail IS
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
--   someone@some-domain
--   "Someone at some domain" <someone@some-domain>
--   Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
    addr VARCHAR2(256);
    i    pls_integer;
    FUNCTION lookup_unquoted_char(str IN VARCHAR2,
                      chrs IN VARCHAR2) RETURN pls_integer AS
      c            VARCHAR2(5);
      i            pls_integer;
      len          pls_integer;
      inside_quote BOOLEAN;
    BEGIN
       inside_quote := false;
       i := 1;
       len := length(str);
       WHILE (i <= len) LOOP
      c := substr(str, i, 1);
      IF (inside_quote) THEN
        IF (c = '"') THEN
          inside_quote := false;
        ELSIF (c = '\') THEN
          i := i + 1; -- Skip the quote character
        END IF;
        GOTO next_char;
      END IF;
      IF (c = '"') THEN
        inside_quote := true;
        GOTO next_char;
      END IF;
      IF (instr(chrs, c) >= 1) THEN
         RETURN i;
      END IF;
      <<next_char>>
      i := i + 1;
       END LOOP;
       RETURN 0;
    END;
BEGIN
    addr_list := ltrim(addr_list);
    i := lookup_unquoted_char(addr_list, ',;');
    IF (i >= 1) THEN
      addr      := substr(addr_list, 1, i - 1);
      addr_list := substr(addr_list, i + 1);
    ELSE
      addr := addr_list;
      addr_list := '';
    END IF;
    i := lookup_unquoted_char(addr, '<');
    IF (i >= 1) THEN
      addr := substr(addr, i + 1);
      i := instr(addr, '>');
      IF (i >= 1) THEN
     addr := substr(addr, 1, i - 1);
      END IF;
    END IF;
    RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
                     name IN VARCHAR2,
                     value IN VARCHAR2) IS
BEGIN
    utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
                  last IN            BOOLEAN DEFAULT FALSE) AS
BEGIN
    IF (last) THEN
      utl_smtp.write_data(conn, LAST_BOUNDARY);
    ELSE
      utl_smtp.write_data(conn, FIRST_BOUNDARY);
    END IF;
END;
PROCEDURE mail(sender     IN VARCHAR2,
           recipients IN VARCHAR2,
           subject    IN VARCHAR2,
           message    IN VARCHAR2) IS
    conn utl_smtp.connection;
BEGIN
    conn := begin_mail(sender, recipients, subject);
    write_text(conn, message);
    end_mail(conn);
END;
FUNCTION begin_mail(sender     IN VARCHAR2,
                recipients IN VARCHAR2,
                subject    IN VARCHAR2,
                mime_type IN VARCHAR2    DEFAULT 'text/plain',
                priority   IN PLS_INTEGER DEFAULT NULL)
                RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
BEGIN
    conn := begin_session;
    begin_mail_in_session(conn, sender, recipients, subject, mime_type,
      priority);
    RETURN conn;
END;
PROCEDURE write_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN VARCHAR2) IS
BEGIN
    utl_smtp.write_data(conn, message);
END;
PROCEDURE write_mb_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN            VARCHAR2) IS
BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn    IN OUT NOCOPY utl_smtp.connection,
                message IN RAW) IS
BEGIN
    utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn         IN OUT NOCOPY utl_smtp.connection,
               data         IN VARCHAR2,
               mime_type    IN VARCHAR2 DEFAULT 'text/plain',
               inline       IN BOOLEAN DEFAULT TRUE,
               filename     IN VARCHAR2 DEFAULT NULL,
                  last         IN BOOLEAN DEFAULT FALSE) IS
BEGIN
    begin_attachment(conn, mime_type, inline, filename);
    write_text(conn, data);
    end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn         IN OUT NOCOPY utl_smtp.connection,
                 data         IN RAW,
                 mime_type    IN VARCHAR2 DEFAULT 'application/octet',
                 inline       IN BOOLEAN DEFAULT TRUE,
                 filename     IN VARCHAR2 DEFAULT NULL,
                 last         IN BOOLEAN DEFAULT FALSE) IS
    i   PLS_INTEGER;
    len PLS_INTEGER;
BEGIN
    begin_attachment(conn, mime_type, inline, filename, 'base64');
    -- Split the Base64-encoded attachment into multiple lines
    i   := 1;
    len := utl_raw.length(data);
    WHILE (i < len) LOOP
       IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
      utl_smtp.write_raw_data(conn,
         utl_encode.base64_encode(utl_raw.substr(data, i,
         MAX_BASE64_LINE_WIDTH)));
       ELSE
      utl_smtp.write_raw_data(conn,
        utl_encode.base64_encode(utl_raw.substr(data, i)));
       END IF;
       utl_smtp.write_data(conn, utl_tcp.CRLF);
       i := i + MAX_BASE64_LINE_WIDTH;
    END LOOP;
    end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn         IN OUT NOCOPY utl_smtp.connection,
                    mime_type    IN VARCHAR2 DEFAULT 'text/plain',
                    inline       IN BOOLEAN DEFAULT TRUE,
                    filename     IN VARCHAR2 DEFAULT NULL,
                    transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
    write_boundary(conn);
    write_mime_header(conn, 'Content-Type', mime_type);
    IF (filename IS NOT NULL) THEN
       IF (inline) THEN
       write_mime_header(conn, 'Content-Disposition',
         'inline; filename="'||filename||'"');
       ELSE
       write_mime_header(conn, 'Content-Disposition',
         'attachment; filename="'||filename||'"');
       END IF;
    END IF;
    IF (transfer_enc IS NOT NULL) THEN
      write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                  last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (last) THEN
      write_boundary(conn, last);
    END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
    end_mail_in_session(conn);
    end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
BEGIN
    -- open SMTP connection
    conn := utl_smtp.open_connection(smtp_host, smtp_port);
    utl_smtp.helo(conn, smtp_domain);
    RETURN conn;
END;
PROCEDURE begin_mail_in_session(conn       IN OUT NOCOPY utl_smtp.connection,
                      sender     IN VARCHAR2,
                      recipients IN VARCHAR2,
                      subject    IN VARCHAR2,
                      mime_type IN VARCHAR2 DEFAULT 'text/plain',
                      priority   IN PLS_INTEGER DEFAULT NULL) IS
    my_recipients VARCHAR2(32767) := recipients;
    my_sender     VARCHAR2(32767) := sender;
BEGIN
    -- Specify sender's address (our server allows bogus address
    -- as long as it is a full email address ([email protected]).
    utl_smtp.mail(conn, get_address(my_sender));
    -- Specify recipient(s) of the email.
    WHILE (my_recipients IS NOT NULL) LOOP
      utl_smtp.rcpt(conn, get_address(my_recipients));
    END LOOP;
    -- Start body of email
    utl_smtp.open_data(conn);
    -- Set "From" MIME header
    write_mime_header(conn, 'From', sender);
    -- Set "To" MIME header
    write_mime_header(conn, 'To', recipients);
    -- Set "Subject" MIME header
    write_mime_header(conn, 'Subject', subject);
    -- Set "Content-Type" MIME header
    write_mime_header(conn, 'Content-Type', mime_type);
    -- Set "X-Mailer" MIME header
    write_mime_header(conn, 'X-Mailer', MAILER_ID);
    -- Set priority:
    --   High      Normal       Low
    --   1     2     3     4     5
    IF (priority IS NOT NULL) THEN
      write_mime_header(conn, 'X-Priority', priority);
    END IF;
    -- Send an empty line to denotes end of MIME headers and
    -- beginning of message body.
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (mime_type LIKE 'multipart/mixed%') THEN
      write_text(conn, 'This is a multi-part message in MIME format.' ||
     utl_tcp.crlf);
    END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
    utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
    utl_smtp.quit(conn);
END;
END;
/

Send emails with attachments residing in the network

Hi All,
My requirement is to send email with attachments. I am using javamail and it works fine only if the attachment resides in the local machine.
If the attachment resides in the network [the folder is shared by the user], the application gives me IOException.
Please help. Let me know if I am not clear.

Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message

Cant send emails with attachments

All of a sudden I cant send emails with attachments from my iphone or iPad.
Has anyone else had similar issues?
I have deleted and reset the accounts up and also tried different devices all with the same problem.

Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message

Mail Sender Adapter with IMAPS

Hi,
I had a Mail Sender Adapter running fine with imap. Our Email Server has changed now to secure protocol. Therefore I need to use the Mail Sender Adapter with IMAPS. If I use imaps://<mailserver>:993 in the channel configuration the Mail Adapter aborts with error "not initialized; mail agent null" and in the default trace it says "failed to initialize the channel: java.io.IOException: illegal protocol for XMBIMAPInitiator: imaps#". If I configure the Mail Adapter with <b>imap</b>://<mailserver>:993 the Mail Adapter starts and says "running", but it does not poll the postbox. In the security.log file there is a warning about untrusted certificates "com.sap.security.core.server.https.SecureConnectionFactory#Plain###Attempting to create outgoing ssl connection without trusted certificates#". I did already import the (CA) Certifcate of the mailserver with key storage service of J2EE Engine in the Trusted area and I configured the J2EE Engine for using SSL (the https access to the J2EE Engine works fine).
What is still missing in XI 3.0 (SP12)? I can access the postbox securely with e.g. Thunderbird using port 993.
Has anyone an idea or had already this issue?
Thanks for any help in advance.
Peter

Hi Sebastian ,
The Mail sender --IMAPS , did it solve your issue because i fcae the same kind of Error in Communication Channel :
exception caught during processing mail message; java.io.IOException: unable to create a socket
Mail sender CC:imaps://NZxxx.dknz.nzcorp.net:993/NZDKINVOICES
-Login Credentials is correct.
-Defualt XI Paramters are correct
-Mail Server is the right one
-Tried in command prompt , N:/telnet NZxxx.dznz.corp.net 143 , but i get response : Could not open connection to the host, on port 143 .Connection Failed
Could you kindly assist
Thanks,
Vara

T'bird stopped sending msg with attachments or save it in drafts

When sending messages with attachments, I get the following error:
Sending of message failed.
Unable to open the temporary file C:\Users\Rick\AppData\Local\Temp\moz_mapi\Document - 14101501 Dairy Queen Hastings - Created Nov 24, 2014.pdf. Check your 'Temporary Directory' setting.
When I try to save it in Drafts:
Unable to save your message as draft.
Unable to open the temporary file C:\Users\Rick\AppData\Local\Temp\moz_mapi\Document - 14101501 Dairy Queen Hastings - Created Nov 24, 2014.pdf. Check your 'Temporary Directory' setting.
There was possibly a Windows update a few days before the trouble.
I can't find 'Temporary Directory' setting and wouldn't know what to do with it if I found it.

You need to delete the document from the C:\Users\Rick\AppData\Local\Temp\moz_mapi folder.
These folders etc are in the 'AppData' folder which is hidden by default.
You can make hidden files and folders visible.
* http://kb.mozillazine.org/Show_hidden_files_and_folders

Procedure for Sending Emails with Attachments

Hi All,
Q1. We wish to write a PROCEDURE that sends emails with attachments in SQL. Can someone please suggest the procedure code for the same?
Q2. Apart from DBMS_JOB utlity can any other this procedure be scheduled to send automatic emails picking up files from a remote filer randomly.
Regards,
Chinmay

http://www.lv2000.com/articles/utlsmtp.htm
I do not understand what the article is trying to say when it says this:
<quote>
1. You cannot send a Subject line with your email.
2. You cannot add attachments to your message.
Hopefully, these two deficiencies will be rectified in future releases!
</quote>
The entire email sending code with attachments is freely available from Oracle (sitting on top of utl_smtp package). No need to buy additional software.

Sending emails with attachments through outlook 2003

Hello,
I have recently switch from cablevison to Fios. With Cablevison, I never had a problem with email. However, now I am having problems sending emails with attachments using outlook 2003. I have called Verizon and we troubleshooted the problem and they feel this is a Microsoft problem.
I can send email's without attachments through outlook and verizon.net, but I can't send emails with attachments through outlook, I can send them though verizon.net. All my settings are correct for sending and receiving email.
I called Microsoft and they say it a Verizon problem...
HELP, does anyone have a solution?????
Thanks
Len628

Which antivirus software do you run on your computer? Are there any errors posting? Have you shut off any email firewalls temporarily to attempt to isolate your issue? Do you have outlook 2003 on more than 1 pc in your home? Have your tried to attach a small text file and send it to see if that goes thru successfully?
Joe D
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!

Is it possible to send emails with attachments fro...

Hi there,
I was wondering whether it's possible to send emails with attachments from a Nokia 5230, it's just I would like to be able to send emails with attachments without using a computer especially when I'm out on my journeys.
Many thanks,
Tim Auluck
Solved!
Go to Solution.

Hi RocknRollTim,
Thanks for your reply. Have you already tried sending these files? Though you're not able to create all these files on the phone itself, you should be able to send them in an attachment when they're on your memory card.
Uploading a .jpg, .tiff, .gif, .doc, .docx .htm, .html .key, .numbers, .pages, .pdf, .ppt, .pptx, .txt, .rtf, .vcf, .xls or .xlsx file shouldn't be a problem when uploading. Just click on 'Other' when adding an attachment, then on 'Other files' and there you will be able to select any file that you have saved on your memory card.
Whether you can actually send the email depends on the strength of your internet connection (as I mentioned in my previous post). Also keep in mind that the phone itself as well as the network work with a maximum size file that you can send over 3G (more information about this can be found here), and can therfore also limit you in sending large files.
In any case, let me know how you get on so that we can assist further where necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Scheduling a Mail Sending Job with APEX

Hi
I would like to know if it is possible to schedule an e-mail sending job with APEX(for purposes like birthday reminders etc). Currently, I am able to send e-mail from APEX by creating a process which is triggered by a button. I am using the apex_mail.send procedure to send e-mail. This is working fine, but I would ideally want the email sending process to be scheduled to run independent of a manual trigger, i.e. the system date should be the trigger, and it should repeat after a specified interval. (The method should be such that emails are sent out even when the APEX application is not running,i.e. the process should take the data directly from the database.)
Thanks,
Kamal

Hi Kamal,
I'm new to this apex tool...I doesnt know how to configure email.....Has i have seen in ur message that you could able to send email from apex but u asked about scheduling in email, a kind of deep concept to some one....I'm not thing of the scheduling right now...Can you please guide me in step wise manner of how to configure email...Since i doesnt know this basic thing of configuring email with the APEX...
From ur message im sure that ill be getting answer.....Any way thanks in advance for ur help.....
With Regards,
Hari R...
Edited by: HariPrasad on Sep 13, 2010 11:24 PM

Mail Sender Adapter with multiple sMIME attachments

Hi!
I 'm using XI 3.0 SP 15.
I have problems with my Mail-Sender-Adapter.
The mails, I fetch, contain a certificate and multiple xml-attachments. The xml's represent an IDOC-structure (INVOIC.INVOIC02).
The task is to first check the certificate, and then to send each of the XML attachments separately to an SAP-System.
1) We have twelve partner which use this e-Invoicing interface. How do I administer the certificates and do I have to create for each partner a "Sendervereinbarung"?
2)
The second problem is, that I have multiple payloads which have to be processed separately. How can this be done?
kind regards and thanks a lot for your help
MArtin

As we have multiple xml-attachments, I guess we have a major problem anyway.
I guess Certificate verification in the sebder agreement is done after the Module Processing of the email-adapter isn't it?
Due to the multiple attachments we have to write a customer specific Module for the email-adapter anyway.
I guess the only way is that the module validates the certificate against the J2EE KeyStore and then extracts the various xml attachments to a file share.
A File sender adapter then polls the file share and the sender aggreement / receiver agreement /mapping ... process starts.
The only question is if the file adapter works also without a sender agreement, so that the xml's are stored on the file share
Do you have an idea, if this works? or do you see any alternatives?
thanks alot for your help!!
MArtin

Sending Emails with Attachments greater than 255 chars in 4.6C

Hi,
I have a requirement in which i have to send mails with attachments greater than 255 characters. The attachment would be a tab-delimited .TXT file. Since i am working on 4.6C, i don't have the luxury of using the FM 'SCMS_STRING_TO_FTEXT'.
It's very urgent. So any help in this regards would be greatly appreciated.
Thank you.
Balaji

Hi,
Internal table to be passed to SOLIST1 type int, table and then compress this table using fm "table_compress" with the compressed table then call fm "table_decompress" and pass this to function module SO_NEW_DOCUMENT_ATT_SEND_API1.
Keep in mind the following variable
i_packing_list-transf_bin = 'X'.
aRs

Bug report: Mail sends messages with empty bodies

Over the last year, I have experienced a particularly irritating bug in Mail.app at least a dozen times. I finally have a good idea as to what causes it.
The problem involves long email messages (often with attachments) that end up being sent with blank bodies (and no attachments). Even the copy in the "Sent" folder ends up blank, and several minutes or hours of work vanishes into thin air, not to be seen ever again.
I finally realized that this bug only occurs when sending mail through our work SMTP server while outside the work firewall, and only as a result of a certain sequence of events. Here is what happens:
When we connect to our work SMTP server from outside the local network and without going through the VPN, the SMTP server requires password authentication. If the current SMTP selection in Mail.app is the one that does not require authentication, the SMTP server rejects the message. At that point, Mail.app opens the email I am trying to send and brings up a modal dialog that says "Cannot send message using the server xxx.xxx -- The server response was: xxx@xxx relaying prohibited. You should authenticate first." The dialog also presents a drop-down list of SMTP server choices. I choose the password-authenticated version of the server and then click on "Use Selected Server" to send the message.
This works almost all the time, but on occasion it ends up sending a blank message! If I have a long email, particularly with attachments such as PDFs that are rendered in the body of the message, it takes a few seconds for the mail message to be rendered underneath the modal dialog box. Since I am used to this STMP rejection behavior, sometimes I am too fast to choose another STMP server from the list and click on "Use Selected Server" before the mail message is rendered on screen! The result, invariably, is a blank email message that gets sent.
I guess what is happening is that when the STMP server rejects the message and hands it back to Mail.app, the message gets copied into a buffer in order to be displayed on screen. Selecting another server and resending it immediately (before the message is copied into the buffer completely) causes the message body to get trashed.
I hope that this description is adequate for Apple QA folks to replicate and isolate the problem (and hopefully fix it). One solution (although not the most elegant one) would be to disable the "Use Selected Server" action until the message is copied into the buffer and rendered on screen.

This could be related to another bug reported here recently:
E-mail looses all images if mail server doesn't accept outgoing email...
You cannot count on Apple looking into this or even noticing it if you report it here, so I suggest you the same I suggested in the other thread, i.e. report it in one of the following places:
http://www.apple.com/macosx/feedback/
http://developer.apple.com/bugreporter/

Cannot send gmail with attachments v5.3

Recently I have been unable to send any email (gmail) with attachment of any size or format, Mail tries for a few seconds and then I get a pop up to say unable to send with the server Gmail. Never had a problem before, I have tried to resend some emails with attachments but these get the same response.
Have tried a different Browser, have tried sending direct from Gmail but all the same. Have rebuilt, have run 'Maintenance' but nothing still, I am getting to the point of hair pulling.
Oh, 'Connection Doctor' shows no problems, file size is immaterial, I have changed no settings in Mail or Gmail.
Am running 10.7.5 Lion on my imac wit mail 5.3.
Any ideas? Please be detailed with any replies because although I am not a newbie I am certainly not a Apple Genius!!!!!!

Hey SundanceFoto,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What size attachments have you tried to send? Also have you tried connecting to a Wi-Fi network to send the emails? Also what type of attachments have you tried to send?
Usually if you get a clock beside any message, it means the message is awaiting a data connection from your network service provider.
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Mail sender client with attachments

Similar Messages

Maybe you are looking for