Mail sender varies by content

So, my husband and I both use the iPhone 5S. We sync mails from out Gmail account via Outlook to the phone. Mostly we send mails from our phones as well.
So here's the problem: sometimes when I send e-mails from my iPhone (and this happens ONLY on the phone), the sender of the mail changes from my name to my husband's: this happens preferably when the content of the mail only consists of weblinks. My husband on the other hand doesn't have this problem.
I'm desperate to solve this, because it causes a lot of problems with customers. I already tried to delete the account on my iPhone and reset it. Hope anybody can help

You have to look at the settings in your email account to see what is set up as the sender's name. It can vary as you see. If you're sending from something on the web, it can be a name or an email address.

Similar Messages

Iphone error yahoo mail- sending the message content to the server failed

yesterday i changed my yahoo password (because my yahoo email acct started spamming all of my email contacts) and i also changed password on my iphone 4s settings but now cant send emails (can get them just fine)
i get the error "sending the message content to the server failed" and the email gets stuck in the outbox.
i have deleted the yahoo acct multiple times, rebooted the phone and restored network settings, added other yahoo smtp.mail.yahoo.com server, went to the genius bar for an hour, but no luck. tried a new iphone at apple store and added my yahoo account, but still had the same error from their phone.
they said contact yahoo- currently awaiting that reply.
my gmail acct sends emais fine thru iphone.
any help appreciated
thanks
jb

hi - i posted this in another thread but meant to post it here - oops - i've been following this thread and others for days now - i also have been having safari/email 'sending message content to server failed'/flash 10 plugin problems since latest security/java/qt software update - here's what i recommend and what i'll be doing from now on - before i install any updates via software update i'll be saving the download/installers to a folder as suggested in another topic thread - next i'll be disconnecting my router - and connecting the modem directly to the computer - bypassing the router - once i'm sure configurations/internet/mail are functioning correctly i'll connect the router - all this time my problems were with my router port settings - not safari or flash 10 plugin or mail app - go figure - hope this helps - peace!

Mail: 'Sending the message content to the server failed'

My wife has a MacBook Pro and I have an iMac, both using Tiger and both using Mac Mail with Gmail accounts. We frequently get errors when sending mail - mail cannot send so it puts the messege indefinately in my Outbox. We both recieve mail just fine.
The exact error is:
'This message could not be delivered and will remain in your Outbox until it can be delivered.
Sending the message content to the server failed.'
I tried changing my port 25 to 587 and it did not seem to work. Any ideas?
Thank you.

hi - i posted this in another thread but meant to post it here - oops - i've been following this thread and others for days now - i also have been having safari/email 'sending message content to server failed'/flash 10 plugin problems since latest security/java/qt software update - here's what i recommend and what i'll be doing from now on - before i install any updates via software update i'll be saving the download/installers to a folder as suggested in another topic thread - next i'll be disconnecting my router - and connecting the modem directly to the computer - bypassing the router - once i'm sure configurations/internet/mail are functioning correctly i'll connect the router - all this time my problems were with my router port settings - not safari or flash 10 plugin or mail app - go figure - hope this helps - peace!

E-Mail sending problems on STMP account

I get this message every time I try and send a message through apple mail and the STMP server and can't figure out how to send e-mails. I have deleted my mail account and tried other things on different threads. I can't figure out what to do about this PLEASE SOMEONE HELP!!!!-- Here is the message I recieve when I attempt to send mail: *Sending the message content to the server failed*

Hello,
Same story here (see my other post - http://discussions.apple.com/thread.jspa?threadID=1220979&tstart=0).
This is a serious bug Apple. How about some help? I'm willing to provide logs, access to my machine, whatever you need to get the job done.
Thanks in advance,
Bryan

TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
Message is " A copy has been placed in your
Outbox. Sending the message content to the server failed."
Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
Address is fine etc.

How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

My CEO has an ipad2 and I set it up w/ AOL. She cannot send any email via her AOL account from her iPad. She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed." We've tried it on wifi and on 3G (Verizon version). I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work. The SMTP settings are smtp.aol.com, port 587. I've tried adding an alternate server/smtp, but I haven't been able to find anything that works. Any advice or other people having this issue? It works fine sending an email from her aol web mail. And unfortunately, having her sign up for a gmail account is not an option. Thanks

Interesting. Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
I have two email accounts on my iphone - AOL and my email from my business website. I deleted both and then recreated first the business account and then the AOL account. Same error. Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result. I still get the error "A Copy has been placed in your Outbox. Sending the mssage content to the server failed."
Perhaps this problem will get fixed by IOS 6. AOL will not talk to me unless I pay and Apple says its not their problem. So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone.

Send E-mail Send E-mail question

Hi,
Im trying out the Developers Toolbox and am trying to figure out if its right for me, and have very basic - beginning MySQL and php skills.
The tutorial at http://help.adobe.com/en_US/Dreamweaver/9.0_ADDT/help.html?content=ch12_send_email_01.htm l is rather sketchy, when I follow the tutorial on that page:
"The Send E-mail trigger allows the site developer to automatically send an e-mail when a form is submitted. It is an AFTER trigger, and it can be executed after insert/update/delete/custom transactions.
This trigger is accessible from the Application panel, Server Behaviors > + > Developer Toolbox > Send E-mail > Send E-mail."
well, when I try that, I get an error on the page which says:
"There are no insert, update, custom or login or delete transactions on page. Please insert an appropriate transaction first."
OK I am assuming that I need some kind of an html form open and on a page, however where do I start? Its as if the tutorials left out a huge chunk of the instructions. I realize I am no expert but if someone was buying the toolbox for the first time how would one know where to start? Do I need to create a new database table first? What kind of table? Can it be a table that is part of the site database for the shopping cart database that I already have linked to the store? Or does it need to be a seperate - database, table? Or just a php page with the form in it? Or does the form page need to be .html?
Or is the toolkit only for advanced developers with advanced php and MySQL skills and should I not even bother buying it?
Anyway can someone please give me a hint?
All I am trying to do is construct a simple email form for my web site which I have created in Dreamweaver and I need a php script to process the data inserted into the form and send it off to the mail server to forward to the webmaster's email address. I have the form created and brought up the form page, but then the Server Behaviors > + > Developer Toolbox > Send E-mail > Send E-mail. Tab is not accessible, and I am assuming that it wont be unless I have a .php file open, so I dont have a clue as to where to start.
So Ive got 27 days left to determine if its worth buying the toolbox, if I cant figure it out by then then I guess Ill buy some easier to use extension or stand alone to create my email form and other scripts.

Hi DBS,
just some thoughts:
So Ive got 27 days left to determine if its worth buying the toolbox, if I cant figure it out by then then I guess Ill buy some easier to use extension or stand alone to create my email form and other scripts
honestly said: if sending form data via email is about all you want to achieve, buying ADDT or even trying to learn it would be overkill, as it comes with heaps of features which you´ll probably never need -- in this case investing in a stand alone form-to-email script seems a better solution.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

A copy has been placed in your outbox. sending the message content to the server failed

all of the sudden my phone wont send emial but will receive them. I have tried everything suggested as far as turn on/off, delete acct and set it up again and nothing seems to be working. Can someone help me please?? the error message i receive is "a copy has been placed in your outbox. sending the message content to the server failed"

I think what happened to me was that my yahoo account was compromised by http://thenextweb.com/insider/2013/01/07/yahoo-mail-users-hit-by-widespread-hack ing-xss-exploit-seemingly-to-blame/
Yahoo responds to these reports at the end saying they fixed the issue. I think what that my mobile yahoo mail was somehow blocked by yahoo because that was the device that i logged into right before (the hacker) blasted all of my inbox. That is the only thing I can think of. Exactly 24 hours later I was able to send email. I did figure out that for the iPhone 4gs you can go into your settings and yahoo mail and change the outgoing server from yahoo to gmail if you have gmail set up on your phone and that will allow you to send from yahoo through gmail. I also sent a feedback form to yahoo, that is the only way to contact them, and have heard nothing. There is nothing about this on their support site. So let us know if after 24 hrs you are magically able to send. Yahoo really should use that log in history where they can see that a log in has occurred from a strange IP to block that and warn the user. My log in history right before this happened went: home IP in the US, home IP, homeIP, home IP, Morroco, home IP, home IP, etc. So it is blatantly obvious. My little software company can block IP's, I know yahoo can.

How can i read only .txt file and skip other files in Mail Sender Adapter ?

Hi Friends ,
 I am working on scenario like , I have to read an mail attachement and send the data to R3.
 It is working fine if only the .txt file comes.
 Some times ,html files also coming along with that .txt files. That time my Mail adapter fails to read the .txt file.
 I am using PayLoadSwap Bean and MessageTransformBean to swap and send the attachment as payload .
 Michal as told to write the Adapter module to skip the files .But i am not ware of the adapter moduel . If any blogs is there for this kind of scenarios please give me the link.
 Otherwise , please tell me how to write adapter module for Mail Sender Adapter?
 How to download the following
 newest patch of XI ADAPTER FRAMEWORK CORE 3.0
from SAP Service Marketplace. Open the file with WinZip and extract the following
SDAs:
aii_af_lib.sda, aii_af_svc.sda
aii_af_cpa_svc.sda
 I have searche in servive market place .But i couldn't find that . Can you please provide me the link to download the above .
 If any other suggestions other than this please let me know.
Regards.,
V.Rangarajan

=P
Dude, netiquette. Messages like "i need this now! Do it!" are really offensive and no one here is being payed to answer anyone's questions. We're here because we like to contribute to the community.
Anyway, in your case, just perform some search on how you could filter the files that are attached to the message. The sample module is just an example, you'll have to implement your own. Tips would be to query the filename of the attachments (or maybe content type) and for the ones which are not text, remove them.
Regards,
Henrique.

Error in mail sender channel : invalid sequence number

Hello all,
I'm having the following issue.
I'm using the mail adapter to get messages from a mail server, which are attached to the mail.
This interface is already productive, and is working fine most of the time.
Only frequently I get the following error, which can be found in the java log.
exception caught during processing mail message[630];
java.io.IOException: the specified message not found: -ERR invalid sequence
number
This error seems only to appear when there are a lot of mails to be fetched.
All the mail is read into PI and processed succesfully, only I also get a lot these errors.
Does anyone know what causes this error?
I also don't know where this sequence number is coming from, and what's the meaning of this.
Is it possible it's trying to read the same mail more then once?
The settings in the mail sender channel are:
- transport protocol : POP3
- message protocol : XIPAYLOAD
- Use mail package : enabled
- content encoding : none
- Keep attachments : enabled
- QOS : exactly once
- Set adapter specific message attibutes : enabled
The PI version is 7.01
Thanks a lot in advance for the replies on this question.
Kind regards,
Marco van Iersel

Hi
Well we have used it with POP3 and it is working in the way as it should be.
This feature is recommended by sap when the number of emails to be read is large.
You can set this additional parameter to restrict the number of mails fetched by sender mail adapter in one polling interval.
Sometimes the mailbox configured for the sender mail adapter contains large number of unread mails, which exceeds the average expected number of mails in one polling interval. In such a case, processing of all the unread mails in the same polling interval by sender mail adapter degrades the system performance. To avoid this, set value of this parameter to the maximum number of mails to be fetched and processed in one polling interval. The remaining mails exceeding the limit would be processed in the next polling interval.
That's why I have asked you to give it a try.

Mail Sender to Abap Proxy Receiver with Attachements

Hi All,
Scenario: I need to create a ticket in Solman from a mail. I intend to do the scenario as Mail sender to Abap Proxy receiver asynchronous.
I have configured my sender mail adapter and am able to get the mails in XI. The attachements also appear in Inbound payload as MailAttachement-1, MailAttachement-2 etc. I have checked use mail packege and keep attachements in sender adapter.
Transport Protocol: IMAP4
Message Protocol: XIPAYLOAD
Queries:
1. My Inbound Data Type is the mail Package -- ximail30_xsd. Here in sxmb_moni I can see the mail attributes like from, to and the mail body in content. But How can I read the attachements in my message mapping.
2. How can I pass these attachements to Abap Proxy ( I do not need to alter attachments only pass to proxy ). These attachements have to be attached to the Solman ticket in SOLMAN server.
Appreciate your kind response to my above queries.
Thanks.
Regards,
Siddhesh S.Tawate
PS: I have tried using PayloadSwapBean in adapter module but still the content at source remains same.

Hi,
Please find below the part of code that might help you. I have given code only responsible for attachements part of the ticket.
loop at lt_attach into l_attachment.
 count = count + 1.
 if count = 1.
 first_line = 1.
 endif.
 l_type = l_attachment->GET_CONTENT_TYPE( ).
 split l_type at '"' into l_type
 file_name
 l_name.
 l_name = file_name.
 split file_name at '.' into file_name
 file_type.
 l_xstring = l_attachment->GET_BINARY_DATA( ).
 strlen = xstrlen( l_xstring ).
 Compute int = ( strlen div 255 ).
 Compute rem = ( strlen mod 255 ).
 if rem <> 0.
 int = int + 1.
 endif.
 count1 = int.
 if count = 1.
 last_line = count1.
 else.
 if int = 1.
 first_line = last_line.
 else.
 last_line = first_line + count1.
 endif.
 endif.
 wa_APPX_HEADERS-APPXNO = count.
 wa_APPX_HEADERS-DESCR = l_name.
 wa_APPX_HEADERS-FILETYP = file_type.
 wa_APPX_HEADERS-FILENAM = l_name.
 wa_APPX_HEADERS-FILEFM_UL = 'BIN'.
 wa_APPX_HEADERS-FIRSTL = first_line.
 wa_APPX_HEADERS-LASTL = last_line.
 wa_APPX_HEADERS-FILELEN = strlen.
 wa_APPX_HEADERS-LAST_USR = sy-uname.
 GET TIME STAMP FIELD wa_appx_headers-TIMESTAMP.
 append wa_APPX_HEADERS to it_APPX_HEADERS.
 while count1 <> 0.
 count1 = count1 - 1.
 if count1 <> 0.
 wa_APPX_LINES_bin-LINE = l_xstring+0(255).
 shift l_xstring left by 255 places in BYTE MODE.
 ELSE.
 wa_APPX_LINES_bin-LINE = l_xstring.
 endif.
 append wa_APPX_LINES_bin to it_APPX_LINES_bin.
 clear: wa_APPX_LINES_bin, wa_APPX_LINES.
 endwhile.
 first_line = last_line + 1.
 clear: strlen, count1, file_name, file_type, l_type, int, rem, l_xstring, l_attachment.
 endloop.
CALL FUNCTION 'BAPI_NOTIFICATION_CREATE'
 EXPORTING
 NOTIF_EXT = wa_NOTIF_EXT
 NOTIF_CRM = wa_NOTIF_CRM
IBASE_DATA =
 IMPORTING
 NUMBER = Refnum
 NUMB = Numb
 REFNUM = Ticket_No
 SYSID = SYSID
 TABLES
 NOTIF_PARTNERS = it_NOTIF_PARTNERS
 NOTIF_NOTES = it_NOTIF_N_EXT
 NOTIF_SAP_DATA = it_NOTIF_SAP_DATA
 NOTIF_TEXT_HEADERS = it_NOTIF_TEXT_HEADERS
 NOTIF_TEXT_LINES = it_NOTIF_TEXT_LINES
 APPX_HEADERS = it_APPX_HEADERS
 APPX_LINES = it_APPX_LINES
 APPX_LINES_BIN = it_APPX_LINES_BIN
 RETURN = RETURN
Please observe how first and last line of attachement is calculated. That is what created problem for me initially.
Hope this helps.
Regards,
Siddhesh S.Tawate

Problem of encoding for mail sender adapter

Hello, everyone.
I have faced the problem of mail sender adapter.
When someone send message with any content encoding (even UTF-8) and 8bit content type encoding the XI mail adapter corrupt special and foreign symbols. I checked the message for correct structure and encoding with tpcgw utility and it was fine. For example (this is what I can see in tcpgw)
==== Response ====
+OK
+OK Password required for user itra_xi
+OK XXXXX maildrop has 1 messages (2048 octets)
+OK 1 2048
+OK
+OK 1459 octets
Return-path:
Received: from (port=20091 helo=XXXX)
     by mx76.mail.ru with psmtp
     id 1O7UoW-0003I4-00
     for XXXXXX; Thu, 29 Apr 2010 18:34:04 +0400
Message-ID:
Subject: Message 29 4
Date: Thu, 29 Apr 2010 17:33:43 +0300
MIME-Version: 1.0
Content-Type: multipart/alternative;
     boundary="----=_NextPart_000_0018_01CAE7C2.1D0BBA60"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2900.5843
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
X-Spam: Not detected
X-Mras: Ok
This is a multi-part message in MIME format.
=_NextPart_000_0018_01CAE7C2.1D0BBA60
Content-Type: text/plain;
     charset="utf-8"
Content-Transfer-Encoding: 8bit
Test
Тест
And after processing by XI mail adapter I have this payload (XIPAYLOAD mode using mail package)
Test
├É┬ó├É┬╡├æ┬ü├æ┬é
The same situation with using mail package in xml document.
Any suggestions how this can be corrected?

I switched UTF-8 encoding during displaying of http content in tcpgw utility and all other mail clients detect it as UTF-8 and work fine. Also this problem occurs with different mail clients that are senders of the message. So it seems adapter takes each byte of cyrillic symbol (each from two) and represents it as individual symbol.
Correct me if I'm wrong. Maybe there is some configuration somewhere allowing to correct or maybe it's possible to write module to correct.. but it's quite complicated to split correct and incorrect symbols.

Help requierd on mail sender adapter

i m workin on a scenario to send email from a mail server inbox to XI.i need to configure mail sender adapter....need step by step help on that.
regards,
latika.

hi latika,
the Message Structure to be defined depends on the message protocol that you are trying to use.
I would recommend using XIPAYLOAD. From the help link,
XIPAYLOAD
In this mode, the content of the e-mail is put in the payload of the XI message. If you do not set the Use Mail Package indicator, the information about the sender (From), receiver (To), and subject of the e-mail is lost.
If you have selected XIPAYLOAD as the message protocol, you must make the following additional specifications under Mail Attributes:
If you want to put the entire e-mail message including the header information (From, To, Subject) in the payload, set the Use Mail Package indicator. See the example below. The header information is included in an XML mail package format.

Source Structure
<?xml version="1.0" encoding="UTF-8"?>
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<Subject>Subject</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Reply_To />
<Content_Type>text/plain</Content_Type>
<Content>
This is the content.
</Content>
</ns:Mail>
Regards,
Bhavesh

Mail Sender - Encoding (I need to change from UTF-8 to ISO-8859-1)

Hi,
I'm getting data from email (in ms exchange) using the Mail Sender Adapter.
In the e-mails exists characters as ç (ccedil), ã (atilde), õ (otilde) and others. The XI cannot read this characters because the encode in XML is UTF-8.
How I do to change the encode in XI from UTF-8 to ISO-8859-1 ?
Thank you!

Unfortunately most mail server do not apply the codepage to the content type of a mail.
In this case you have to set the content type with help of the MessageTransformBean:
Transform.ContentType text/plain;charset="ISO-8859-1"
Regards
Stefan

Mail sender varies by content

Similar Messages

Maybe you are looking for