Mail Sending and Outbox errors

I tried to look through old threads and find an answer to my question, but I haven't really read anything about how to fix this problem. I set up my Mail at the beginning of the summer when I got my MacBook with info for my Gmail email account. Everything was fine and I was able to send/reply/forward messages to other people. However, I just started school at UMBC and at first I was able to send. However, for the past two days my sent messages are not being sent and are being clogged in my Outbox. When I check my preferences, I see that my outgoing mail server reads "Gmail (offline)". I'm still getting incoming mail, but I'm not sure how to fix the "offline" problem. I've tried restarting the program and my computer, but the same keeps occurring.
The only thing I can think of is that to use UMBC's internet, you have to go through the intranet login pages first. I'm not sure if it's causing it or not, but it's becoming very inconvenient for me to have to open Gmail on the web and send my messages through there rather than through Mail.
Please help if you have any ideas! I'll keep checking the thread so I can provide with further information if needed.

Okay, I got mine to send (still shows as GMail Offline, though). Found this fix on the thread
http://discussions.apple.com/thread.jspa?threadID=1685517&tstart=30
The post by Nathan C. (the rest of the thread was not helpful).
The solution seems to be to set the outgoing mail server (smpt.gmail.com) port to 587 instead of 25.
Hope this helps you too!

Similar Messages

Exchange server 2013 mail send and received problem

Hi Support,
I have Install Exchange server 2013 and create mail box and local send received locally but days back i have not able to mail send and received. what setting are required for user mail send and received locally. and how to create mx and txt record for my
domain.

Hi,
According to your description, I know that the Exchange server can send/receive internally at beginning, however doesn’t work now. Please correct me if there is anything misunderstand.
Great checklist from S.Nithyanandham. Additionally, how about sending/receiving via OWA? And any error messages when can’t send and receive?
Please make sure the Message Tracking has been enabled and run following command to output track log and check detail information:
Get-MessageTrackingLog |FL > "c:\Track Search.txt"
For more information about Message Tracking logs, please refer to below article:
http://technet.microsoft.com/en-us/library/bb124926
If you want to communicate externally, you need to contact ISP to register DNS MX record.
Best Regards,
Allen Wang

Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Mail won't send, and Outbox doesn't appear

About three days ago my mail stopped sending. When I compose mail everything goes as usual and no alert box pops up when I hit send. However, my mail isn't sending and the outbox isn't showing up to tell me the mail is still pending. I haven't found this problem on any other discussion forums. Is it a .me issue? If I use spotlight it will find unsent messages and says they are in the outbox, but there is no outbox in Mail. Any help would be great. Thanks.

Problem fixed itself inexplicably. Go figure.

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Mail - Attachments and Outbox

On opening mail the software occasionally creates the Outbox and randomly places a message, (usually one that I have received or one from an RSS feed), in the Outbox even though there were no messages waiting or drafts when I last closed Mail. In addition when creating a message with an attachment the following message displays when I check the attachment contents with Word, Quick Look etc. before sending;
Mail was unable to save the attachment “Invoice 51.doc” to disk. Verify that your downloads folder exists and is writable".
The Mail Downloads folder in user/library is writable.
Any ideas how to solve?

Phil,
Good to have posted in the better forum for your questions.
I am not sure I have seen anything like the report about the Outbox -- it does not get created, but rather only displays when something is in it that has not been sent. For that, I would try quitting Mail, and in the Finder open Home/Library/Mail/Mailboxes and delete the Outbox.mbox folder. Mail will create a new one when you next relaunch Mail, and then send a message. If there is something corrupt about the existing one, that would correct.
You should now read through some other topics, and then post back in this one any differences you note between your experience and those already reported. See among several, the following topics:
http://discussions.apple.com/thread.jspa?threadID=2137407&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2172635&tstart=100
Ernie

How to build an E-mail sending and receiving application in Windows Azure?

I am a beginner Windows Azure Developer and I am trying to build applications like Gmail, Hotmail, YahooMail, etc. However, I am unable to build such an application. I have come to know how to send e-mail using SendGrid. Even, I don't know how to configure
to receive e-mails. Please help me on how to develop such an application in windows azure.
Regards

hi Yash,
Thanks for posting!
About how to send mail using sendgrid, I suggest you could try this tutorials firstly via smarx's blog(http://blog.smarx.com/posts/emailtheinternet-com-sending-and-receiving-email-in-windows-azure).
It supplied the method and code sample you could download . You may need create a listener to listen on the right port on workrole always.
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Using Mail, sender and receiver addresses getting mixed.

I'm using the mail app for my company gmail account (@companyname.com) we have them set up for the whole office.
Well what appear to be normal when I write an email and sent it to the desired person, it will later say on their screen or mine that it was sent to entirely different people in my contacts. While the right people still receive the email I indented to send to them they or I see the wrong addresses. Making things very confusing as you can imagine. So for instance I'll send out an email to a client but will say that it got sent to two of my coworkers, however it didn't actually get sent to them, it got sent to the client but just says it went to the wrong people, furthermore on their screen it will say it was sent from a different person as well. Recently got a new macbook so I had to reset up my mail account and it seemed a little dodgy at first so I'm wondering if some got set up wrong and I need to clean out the whole mail accounts, wipe cache?
Please advise. Thank you!
Nate.

adeelarifbhatti wrote:
please can any one tell me how can i log that which user has sent the mail to which user .Messaging Server already provides this information if you add the "logging" keyword to the defaults channel definition in the imta.cnf file e.g.
23-Jun-2008 10:00:58.98 tcp_auth ims-ms EEA 8 [email protected] rfc822;[email protected] recipient_username@ims-ms-daemonIf your users are using SMTP Authentication, you should also add "LOG_USERNAME=1" to the option.dat file to have the smtp authentication username added when used.
Regards,
Shane.

Mail sender and receiver scenario

Hi All,
I want to create one MAIL-MAIL scenario,in which I want to send mail message from one mail server and receive the transferred massage in same mail server.
But I am confused regarding XI's inbound and outbound message for this scenario.
What should be my outbound and inbound message type in this scenario?(if i want just to send one line from my mail)
And who will trigger this mail transfer?Do I need to create some settings on mail server?
please help me.

Hi Michal,
>>it will have to look the same as your XML message that you will send via mail
Can you elaborate on this?
Means will it refer to the mail content in my my email?
bcoz I searched on help.sap i got following payload format:
<?xml version="1.0" encoding="UTF-8"?>
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<Subject>Subject</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Reply_To />
<Content_Type>text/plain</Content_Type>
<Content>
This is the content.
</Content>
</ns:Mail>
Please help me.

Automator to select e-mail sender and copy text on excel

I need to use automator to select e-mail sender, extract specific text and append it on an excel sheet. is it possible?
I have OS Snow Leopard; Mail; a Master Excel 2011 file; several Output Excel 2011 files for the output
I want Automator to check daily if new mails, on a specific account, have been received that match the mail address with a given list of names and related mail address in the Master Excel.
If a new mail is present, Automator should: pick up specific text in the mail body; select and open the related Output Excel file (each output Excel file is saved with the name linked with the e-mail address in the Master Excel); append the text on the given worksheet in the Output Excel file; save the output file.
This should be done with all the received mails that match with the Master Excel file
Is it possible do this kind of thing with automator? may be with the support of VBA for some parts?
I would appreciate any suggestion or idea to resources to investigate

Hi Stephen,
I had the same problem and it is a software bug.
SAP release for us a special sap note number 1278473 - "Followup E-mail doesnot contain text of Notes of Activity".
I dont know if this note was release for all customer, but you can open a message to sap asking help.
My message at sap was 946981/2008.
Regards,
Lalas

New mail: sender and subject dont match message

Has anyone encountered the problem i have at the moment. When receiving a new message, the sender and subject line are new, however when i open the message the main text is from emails I received months ago? its really strange, only appears to be happening on mail I open on my G5 , not on my laptop.
Any suggestions please?

Hi, and welcome to the forums Adam!
Nope, haven't seen nor heard of this one yet, but First I'd backup your whole Mail folder.
Try trashing this file first, then logout/in...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
If that doesn't work try the .plists in...
/Users/YourUserName/Library/Mail/

Mail sender and subject mismatch with message content

I have just started to find a few messages here and there that have a sender and subject which does not match the message content. The frequency of this behavior seems to be increasing. The senders are people I do get mail from and the message content looks like something I would receive from another recognized sender but they don't match. Anyone have any ideas?
Thanks in advance.

Never mind. A little more searching solved the problem.
http://discussions.apple.com/thread.jspa?messageID=11969642&#11969642

User mail send and receive restrictions

Hi there,
Is it possible to restrict multiple user send and recieve function on outlook through exchange to between certain times in the day? For example the users may not send or receive mail between 8:00am an 10:00am to force them to concentrate on another task.

Hi,
As Li Zhen suggested, you can set the send and receive quota using the cmdlet below on 8 am, and configure the send and receive quota back to normal on 10 am.
Set-Mailbox -Identity xxx -IssueWarningQuota xxx -ProhibitSendQuota xxx -ProhibitSendReceiveQuota xxx -UseDatabaseQuotaDefaults $false
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Apple Mail send and receive problems, Network Solutions

Hello Everyone,
I'm currently facing a problem with a company email account that we have with network solutions.
NSmail Pro (IMAP) that is configured with apple mail. Here are the settings that i have:
Incoming mail: mail.(company.domain).com
Port: 110
SSL: No
Outgoing mail: smtp.(company.domain).com
Port: 2525
SSL: No
Auth: Password
Whenever i'm at the office, I can send and receive emails without any problems (Using mail app), but when i'm at home i can't receive emails nor send one.
I'm wondering if this has something to do with the Mail application, cause i can access the email using the webmail on a browser without any problems (either at home or at the Office).
Any thoughts from our experts?

I'm guessing that when you are at the office, you are probably accessing a company network and the company mail will only work with those settings on the company network. You may need to discuss this with your IT department at work to see if it need a different configuration for outside access.
The fact that it works at work and not at home indicates a that it surely an issue with the connection setup.
Assuming that you are accessing it through wi-Fi at both locations, do you have different wi-Fi connections set up on you Mac in Network Preferences, or is it the same wi-Fi connection used for both? In other words, do you have a specific wifi setup on your computer for connecting at the office?

Problem with e-mail sending and arrival

Hello, friends,
My problem started about 15 days ago. Some e-mails simply do not come to my server or take hours or even days to come. I have a PIX 515-R with 8.0(2) software version and "inspect esmtp" is activated. When I ran "debug esmtp", I got some messages like this one: "SMTP: State kept, no EID to use!!!".
I tried to deactivate ESMTP inspection, but I got no results at all.
What is happening with my system? Do you have any glue?
Cheers,
Mauricio

Same problem as Angela_Watson: the mailto function on both e-mail button and standard button prints out two identical mail addresses in the to field in Lotus Notes. [email protected]@domain.com I see several posts on the subject, but no solution that works for me. Did anyone find a more elegant workaround than adding a comma?
Thanks in advance!
Charlotte

Mail Sending and Outbox errors

Similar Messages

Maybe you are looking for