Mail sending issue and receiving sound intermittent

I have three mail accounts on the 3G iPhone if that matters.
The primary SMTP server I have setup for when using email at home on wi-fi. Set up the same as on the Mac to the ISP I connect to. Works fine sending and receiving on the iPhone.
Under other SMTP servers I have set to reflect the mobile provider I connect to when not on wi-fi.
The only way I can send mail using the mobile provider is to turn off the primary server.
The instructions on the screen say " If mail is unsuccessful using the primary server it will try the other SMTP servers in succession. Clearly not doing this as if it can't connect using the primary server it doesn't continue searching through other servers.
Anyone else experiencing the same problem?
In addition the sound on receiving mail is intermittent and generally doesn't work. If it does it only works the one and then only one of the three accounts. And then goes away again.
I was hoping that the 2.1 update may have fixed both of these.

Bump

Similar Messages

Send Task and Receive Task

In our beta test, we came upon several issues, one of them is when we create a BPMN process that consists of the following simple flow: Start -> User Task 1 -> Send Task -> User Task 2 -> Receive Task -> User Task 3 -> End
When we deploy and run the flow, it always stops at the Receive Task. But when we remove User Task 2 from the flow and redeploy and run, the process runs fine all the way to the end. I am wondering if this is a bug in BPM 11g where if you put an activity between Send Task and Receive Task, it does not work, but when you do not have a task between Send Task and Receive Task, it works fine. Can someone confirm this scenario please?
Within the Send Task and Receive Task, we are invoking a BPEL process that has a simple asynchronous service. The Send Task invokes the BPEL process, and the Receive Task has the callback to the BPEL process.
Makes sense?
Thanks.

What does the bpel process do? Does it work with a synchronous bpel process?
I think you should submit an SR for this since it works when there is no activity between the send/receive.
Heidi.

PI 7.1 Sender Interface and Receiver Interface gets interchanged

Hi All,
I m facing a strange problem in PI 7.1
For many of my scenarios, the Sender Interface, sender namespace and receiver Interface, receiver namespace information gets interchanged and displayed incorrectly.
But sometimes its working fine.
When we analysed the Log messages, found that, after xml validation step, the sender and reciever interface gets interchanged.
Any idea why this happens?
How to rectify this error?

Aarthi,
Please check your message interfaces once again. Sender is outbound and Receiver is inbound.
Also please check your receiver determination.
Regards,
---Satish

Sender DEBIT and receiver DEBIT

Dear all,
I notice in settlement, there are 2 button : sender and receiver. Now, what confused me is why both also called sender debit and receiver debit?
Why both also DEBIT?
Please advise me.
Thanks

Dear All,
I see mostly it is like that where sender debit and receiver debit. If you go into KO88 previous settlement, you will get this.
I read in forum also it is explaining in debit.
You assign the debit cost element groups to a settlement cost element.
You settle by cost element - that is, the debit cost element is the settlement cost element.
so i would like to know why the title is sender debit and receiver debit. why both debit.
thanks

Regarding Sender query and receiver query

Hi Masters
I have one sender query and receiver query. Both queries contain G/L account.
First I got sender query report, in this report I drill down one free charactteristics field to get correponding field sales document in receiver report.
Is it mandatory which field i drill down in sender report should be in receiver report?
Could you please help ?
Thanks in Advance
Raja.S

I would rewrite the first one to:
Select t.id_entity,t.id_trade_ref,p.am_stock
from trade t,posting p
where t.id_trade_ref = '5V973781B'
and p.id_trade_ref = t.id_trade_ref
This way, you really make the join between the table.
I think the join is better because it uses less code. I do not think you will notice much performance win between one or the other, especially because it concerns only a few rows.

HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

You are most welcome

I need an application that will enable my ipad to receive calls, make calls , send sms and receive sms. line2 is not available in south africa

i need an application that will enable my ipad to receive calls, make calls send sms and receive sms. line2 is not available in south africa

Skype would be a possibility for phone calls, though I don't know if it's available in SA. Search the iTunes Store for "SMS" and you'll quickly see if there are any SMS apps you can try.
Regards.

Mail delivery and received sounds have stopped

Recently the "whoosh" sound that accompanies mail being sent simply stopped working. A couple of days later the incoming mail alert stopped as well. In all other respects, my Mac mini seems to be working just fine. I'm running the most current OS version. Any ideas? Should I be worried about an impending system failure?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

XI mail sender adapter and SMIME (signed data)

I have a scenario where multiple external parties send signed and encrypted e-mail messages to a single e-mail account, which should be emptied by an XI mail adapter. This works fine when receiving mails from only one party - simply load the party's certificate in the KeyStore and set the relevant references in the sender agreement. The problem is that the sender agreement must point to exactly one KeyStore entry, so there is no way to verify the signature of mails received from the second party. I have also tried creating two sender agreements: one for each party pointing to their respective KeyStore entries. Although XI allows me to reference the same sender mail communication channel from both sender agreements, it seems to simply use the sender agreement that was last saved.
Does anyone know how to get this kind of scenario to work?
Regards,
Thorsten

Hi,
Am trying the same scenario as you did.
Can you guide me step by step how to read , validate and extract data from attachment.
Am stucked in reading the attachment now.
I can able to get mail but not attachment.
Can you tell the steps that you did.
Thanks in advance,
Sakthi

Help! Sporadic Mail sending issues

I have recently upgraded to Lion and since then have been having sporadic problems sending mail. I use a .mac account with O2 broadband at home and an unknown provider at work.
Mail stops sending for several hours at a time, and has done so from both locations. Since my iphone and ipad still send mail without a problem at these times, I have to assume that it is a Lion issue and not a provider issue.
Connection doctor shows green for incoming and outgoing but mail simply refuses to send.
My current mail-send-blackout has been going on for 18 hours now. Yet yesterday my mail would send from home and also when I arrived at work. But halfway through the working day it just stopped. Again. No apparent reason or pattern
If anyone has any suggestions, I'd be very grateful
Thanks
Cal

Yes well there were no changes to the account, just stopped sending mail via SMTP
Deleted account and set up new one, same thing cannot send mail via Mail app
As mentioned another disc on the same comp with same account details etc works fine
so don't understand
Seems a lot of people are having this problem too.
Thanks Anyway

Why will "mail" send but not receive?

Hello, mail program sends mail, but won't receive. I've restarted twice, and restarted modem too, but mail continues to not work properly. Any suggestions?

Try this maybe some help here.
http://www.apple.com/support/macosx/mailassistant/

Mail Sending issue to Outlook - Mail Request not Showing in SOST

Hi,
Im using mail sending logic for sending a mail to Creator of Billing. i have one itab which is having two Users with two different mail IDs. i need to send a mail to those user mail ids to Outlook
user Mail id
12           XXX
12           XXX
13           YYY
13           YYY
at end of User i need to send a mail..
loop at itab.
at end of user.
here sending a mail...for the first user it is sending mail perfectly..and mail request is available in SOST . once its comes to second user sending a mail getting sy-subc = 0 after SO_NEW_DOCUMENT_ATT_SEND_API1 FM..and mail request Not coming for second mail id in SOST both mails also available in Sap out box.
endat.
endloop.
Kindly Help me out..
Regards
Dileep

Hi,
to send mails use this:
FORM docu_send_email USING pv_otfdata TYPE tsfotf
pv_emailid TYPE any
pv_formname TYPE any.
DATA: lv_filesize TYPE i,
lv_buffer TYPE string,
lv_attachment TYPE i,
lv_testo TYPE i.
DATA: li_pdfdata TYPE STANDARD TABLE OF tline,
li_mess_att TYPE STANDARD TABLE OF solisti1,
li_mtab_pdf TYPE STANDARD TABLE OF tline,
li_objpack TYPE STANDARD TABLE OF sopcklsti1,
li_objtxt TYPE STANDARD TABLE OF solisti1,
li_objbin TYPE STANDARD TABLE OF solisti1,
li_reclist TYPE STANDARD TABLE OF somlreci1,
li_objhead TYPE soli_tab.
DATA: lwa_pdfdata TYPE tline,
lwa_objpack TYPE sopcklsti1,
lwa_mess_att TYPE solisti1,
lwa_objtxt TYPE solisti1,
lwa_objbin TYPE solisti1,
lwa_reclist TYPE somlreci1,
lwa_doc_chng TYPE sodocchgi1.
CONSTANTS: lc_u TYPE char1 VALUE 'U',
lc_0 TYPE char1 VALUE '0',
lc_1 TYPE char1 VALUE '1',
lc_pdf TYPE char3 VALUE 'PDF',
lc_raw TYPE char3 VALUE 'RAW',
lc_ordform TYPE char15 VALUE 'ZORDCONFIRM_01',
lc_attachment TYPE char10 VALUE 'ATTACHMENT'.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = lc_pdf
max_linewidth = 132
IMPORTING
bin_filesize = lv_filesize
TABLES
otf = pv_otfdata
lines = li_pdfdata
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT li_pdfdata INTO lwa_pdfdata.
TRANSLATE lwa_pdfdata USING ' ~'.
CONCATENATE lv_buffer lwa_pdfdata INTO lv_buffer.
CLEAR lwa_pdfdata.
ENDLOOP.
TRANSLATE lv_buffer USING '~ '.
DO.
lwa_mess_att = lv_buffer.
APPEND lwa_mess_att TO li_mess_att.
CLEAR lwa_mess_att.
SHIFT lv_buffer LEFT BY 255 PLACES.
IF lv_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Object with PDF.
REFRESH li_objbin.
li_objbin] = li_mess_att[.
DESCRIBE TABLE li_objbin LINES lv_attachment.
Object with main text of the mail.
lwa_objtxt = space.
APPEND lwa_objtxt TO li_objtxt.
CLEAR lwa_objtxt.
DESCRIBE TABLE li_objtxt LINES lv_testo.
Create the document which is to be sent
lwa_doc_chng-obj_name = text-008.
lwa_doc_chng-obj_descr = text-008.
lwa_doc_chng-sensitivty = lc_0.
lwa_doc_chng-obj_prio = lc_1.
lwa_doc_chng-doc_size = lv_testo * 225.
Pack to main body.
CLEAR lwa_objpack-transf_bin.
header
lwa_objpack-head_start = 1.
The document needs no header (head_num = 0)
lwa_objpack-head_num = 0.
body
lwa_objpack-body_start = 1.
lwa_objpack-body_num = lv_testo.
lwa_objpack-doc_type = lc_raw.
APPEND lwa_objpack TO li_objpack.
CLEAR lwa_objpack.
Create the attachment.
Fill the fields of the packing_list for the attachment:
lwa_objpack-transf_bin = gc_x .
header
lwa_objpack-head_start = 1.
lwa_objpack-head_num = 1.
body
lwa_objpack-body_start = 1.
lwa_objpack-body_num = lv_attachment.
lwa_objpack-doc_type = lc_pdf.
lwa_objpack-obj_name = lc_attachment.
lwa_objpack-obj_descr = text-008.
lwa_objpack-doc_size = lv_attachment * 255.
APPEND lwa_objpack TO li_objpack.
CLEAR lwa_objpack.
lwa_reclist-receiver = pv_emailid.
lwa_reclist-rec_type = lc_u.
lwa_reclist-notif_del = gc_x.
lwa_reclist-notif_ndel = gc_x.
APPEND lwa_reclist TO li_reclist.
IF li_reclist IS NOT INITIAL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = lwa_doc_chng
put_in_outbox = gc_x
TABLES
packing_list = li_objpack
object_header = li_objhead
contents_bin = li_objbin
contents_txt = li_objtxt
receivers = li_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDFORM. " DOCU_SEND_EMAIL

IDOC Sender Adapter and Receiver Adapter

Hi,
Why we don't require IDOC Sender Adapter to communicate with PI and why IDOC Receiver Adapter is required to communicate with SAP ?
Regards,
J Augastine

Hi,
>>>Why we don't require IDOC Sender Adapter to communicate with PI
you're talking about sender and receiver agreements right ?
as this adapter is based on abap stack - with new functionalities of IDOC adapter
require sender agreement
>>>and why IDOC Receiver Adapter is required to communicate with SAP ?
as we need to put the RFC to the destination system somewhere...
Regards,
Michal Krawczyk

Sender system and Receiver system

Hi,
I have installed xi on on the server name is XI1 and there is two client 001 and 300. i have created xisuper user on 001. Pls tell me which is sender system or receiver system and xi system.
Please give me some secnario
Thannks

Hi,
you can Use Either (001 or 300 )one of the client for XI Perspective.
And you can send the data through this Client in Xi to any Application
Example:
if you want to send the data from FTP Server to SAP R/3 (100 Client)means
Here You can use either 001 or 300 client of XI as Middleware to send the data to SAP R/3
in this case
Your sender is the FTP Server(File Adapter)--XI is the Middleware--SAP R/3(100 Client) is the Receiver
Regards
Seshagiri

(RFC vs files), where Sender SAP and receiver multiple system

Publish and Subscribe using BPM or Without BPM (RFC vs files), where Sender SAP and receivers multiple system,.
This is my 1st BPM scenario in sandbox system
For this scenario
I Created 2 Data types
2 MT,
Service interface:
Request interface Mode:Asynchronous
Abstract Req interface,Mode:Asynchronous
Response Interface,Mode:Asynchronous
Abstract Respomse Interface ,Mode:Aysnchronous
Synchronous Interface ,Mode:Synchronous
2 Message mapping for Req and Resp
1 Operation Mapping
BPM design: Plz find the attatchement
Can anyone please help me how many Interface determinations,receiver determinations ,sender agreements,receiver agreements need to create for this.......
It will be good if anyone send the BPM design flow for this.........
can we do this scenario without BPM?
Regards
A.Muni kumar
Edited by: Muni 1234 on Jan 31, 2012 10:24 AM

Hi
Receiver is FTP only.....
SAP side is RFC.........
RFC sender will be initiating the scenario, and there is receiver is File, PI should go to file directory and take the file then send it back to RFC as response.
Sender: RFC
Receiver: File
1. is this scenario with condition based routing.. so that each time outof many receiver systems it will trigger any specific system.
if above is the case then you can achive this without BPM also..
Yes...its condition based routing...
I Used async in this scenario.....sender side configurations also done....
But when when I am triggering BAPI from SE37 I am getting an error
Exception SYSTEM_FAILURE
Message ID: 00 Message number: 341
Message:
Runtime error CALL_FUNCTION_NOT_FOUND has occurred
How to Solve this????
I checked the RFC destination which i created in TCP/IP..a nd i mentioned the same in se37 RFC target system..
Connection is Ok
Or we need to create proxy for MI and report for this?
Edited by: Muni 1234 on Feb 1, 2012 8:38 AM

Mail sending issue and receiving sound intermittent

Similar Messages

Maybe you are looking for