Mail sending when QRFC is blocked

Hi ,
The requirement is that i need to send mails to certain people when the QRFC queue ( SMQ1 )  is blocked .
The idea is to send a mail when we have 10 messages awaiting on the corresponding queue.
Please let me know if this can be achieved.
regards

Other way..just to tell you
Create another task in approval process which will send the email to requester and attach it with Reject Response of Approve Task in task to generate mapping.

Similar Messages

  • Mail sends when on Wi-Fi but not on Edge

    Like the subject says, I can send mail out when on my Wi-Fi, but mail will not send when I'm using Edge. I can receive mail while using either though. Any help is appreciated.
    Thanks

    You can't send with either account?
    AOL has an authenticated SMTP server, which should provide for sending with your AOL account when connected to any internet service provider through a Wi-Fi network or when connected via EDGE.
    If your school does not have an authenticated SMTP server for your school's email account, you won't be able to send when not connected to the internet at your school.
    Most internet service providers (even AT&T with their EDGE network), block the use of SMTP servers that are outside of their network (or not provided by the ISP) unless the SMTP server is authenticated. These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain. We can thank low-life spammers for this.
    Your SMTP server settings for AOL's SMTP server should be as follows:
    SMTP Server: smtp.aol.com
    Server Port: 587
    Authentication: Password
    User Name: Your AOL screen name for the account - or the portion of your AOL email address in front of the @ sign only.
    Password: The password for your account - the same password used to check the incoming mail server for new messages.
    Use Secure Sockets Layer (SSL): Not sure if AOL supports this with their SMTP server but if they do, you want this selected.

  • Mail sends when I hit the return key

    For some reason as I'm typing an email,when I hit the return key, not everytime, Mail will send my email out. An unfinished, sometimes embarrasing email. I don't know how this started, but it is quite frustrating. Is there any fix to this?
    I'm using OS 10.9.1
    Thanks!

    This has happened to me ever since upgraded from 10.6.  When I was in the Apple store in November 2013 they said it was a known bug, obvioulsy they have not fixed it.  I'm running 10.8.5

  • Mail sends when I hit return

    Don't know what happened.  But when I hit return to start a new paragraph it SENDS. Is there some weird preference that suddenly activated?

    This has happened to me ever since upgraded from 10.6.  When I was in the Apple store in November 2013 they said it was a known bug, obvioulsy they have not fixed it.  I'm running 10.8.5

  • How to send a mail from a PL/SQL-block in Apex

    Hi, I am using Apex 3.0. On a page in my application users are fill out some fields, and clicking a button Apex inserts a new record in an table processing a PL/SQL-block.
    I would like to add "something" in this block so that Apex every time when it adds a new reord, also sends a mail to some people to inform them....
    A short e-mail: sender:...... receiver..... subject: New record, Text: New record was added
    Is that possible??Thx

    Hey Robert2,
    Apex has an API for sending emails: APEX_MAIL, you will need to have an SMTP server for this.
    Have a look in the user_guid, you will find what you need there.
    OLI

  • I utilise Entourage for my mails. When I tip a mail adress and write a wrong one, I change. When I will send again a mail to the same adress the wrong and good one appears both.  How can I delete the wrong one

    Question is here above but more details here under
    I use Entourage as Mail sender. I don't use the adress book.
    When I tip a wrong adress  and make the correction, the old one stays in the memory of my computer ( apple I Mac ).
    When I wish to send a new message to the same adress, the wrong one appears in the same time , and some time I don't remember wich is the good one .
    To avoid that problem, how can I delete the wrong adress for future sending of mails.

    Solution, use Apple Mail
    I can highly recommend migrating to the Address Book. You won't have the typo'ed history in your email.
    Here's the KB on how to clear the list
    http://support.microsoft.com/kb/823667

  • I use a gmail account for my mail.  When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file.  help

    I use a gmail account for my mail.  When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file.  help

    Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name.  Make sure the settings there are correct.

  • Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?

    Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?
    I basically want to create a rule that will send an automatically crafted form e-mail to the sender when I receive an e-mail with the subject line "New Swimmer". Is this possible?

    Thank you Todd, I was able to get it to work but I do have a few more questions...
    1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
    2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
    (It was actually much longer than that)
    Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
    Thanks,
    Evan

  • Mail freezes when I try to send a group an attachment from contacts

    I tried to send an e-mail group located in my Contacts app a .pdf attachment but the Mail app freezes and does not send the e-mail.  When I manually input the e-mail addresses and try to send the same attachment the e-mail goes through just fine.  Has anyone had the same problem trying to send a Contacts group an attachment?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • When I am on my home wifi I can send e-mail.  When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail.  HELP HOW TO FIX.

    When I am on my home wifi I can send e-mail.  When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail.  HELP HOW TO FIX.

    I know this question is a few years old now, but I recently found myself having the exact same issues;
    Using my iphone or ipad at home created no problems at all, but I couldn't send e mails when away from my home network.
    I recently switched broadband supplier at home and set up a new e mail address, then my problems began!
    I openly admit I'm not great with technology and, to be honest, some of the answers provided on these forums confuse me more than the questions!
    But this worked for me:
    I went along the lines that the fault wasn't with my idevice but possibly with the broadband provider (in my case Plusnet) so I contacted their customer support.
    They referred me to the set up process shown below;
    From your home screen press Settings.
    From the setting menu, choose Mail, Contacts, Calendars followed by Add Account…
    From the Add Account… menu choose Other.
    Fill in your Full Name, Email Address, Password and Description and press Next.If you need help with these, there's more detail underneath the screenshot.
    Full name: Enter your name (or the name you'd like people to see when you send them email)
    Email Address: Enter the address you're setting up, this could be a Plusnet address ([email protected]) or a hosted domain address ([email protected])
    Password: Enter the password for your email address (I don't know what this is)
    Description: Enter a useful description of the email address you're setting up (e.g. Mum's email). You can put whatever you want here
    Press Next to continue.
    More settings will appear. Some will already be filled in.Enter the Incoming and Outgoing Mail Server details and press Next. If you need help with these, there's more detail underneath the screenshot.
    IMAP/POP This will default to IMAP - it's up to you which one you want to use (I don't know what to choose)
    Incoming Mail Server settings
    Host Name: For IMAP this is imap.plus.net - for POP, this is mail.plus.net
    User Name & Password: Enter the username and password for the email address you're setting up (I don't know what these are)
    Outgoing Mail Server settings
    Host Name: relay.plus.net
    User Name & Password: These are optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.Enter the username and password for the email address you're setting up (I don't know what these are)
    When you're finished, press Next.
    If the box shown below appears, press Yes (you may need to do this twice).
    After a minute or two, your email address will be set up and ready to use.If you chose IMAP when setting up you’ll be able to choose whether you want to use Notes (if you chose POP you’ll be taken back to the settings screen from step 2). Press Save when you’re done.
    That's all you need to do. To start checking your email, go back to your home screen and press Mail.
    Now I fully understand that it may be different for each broadband provider but the processes must be similar.
    The key appears to be in setting up the outgoing message server settings in step 5. Where it says "optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.
    http://www.plus.net/support/email/setup/ios-setup.shtml#pagetop
    Where it says "we recommend" I think it should read "you must fill these in"
    I went back to Settings - Mail,Contacts, Calenders - click on the offending account and click on the account shown.
    Under OUTGOING MAIL SERVER click on the server, in my case relay.plus.net, and click again to show the details. make sure you enter your user name and password and after a few seconds the account will verify and show a load of ticks.
    I tried this on my phone this morning while on 3G only. I sent an email to another of my addresses and immediately got the response that the message couldn't be sent as the recipient was rejected and the message had been placed in my Outbox. I followed the above steps and immediately heard the satisfying "whoosh" as my mail was sent. 10 seconds later another satisying beep as my e mail arrived at my alternate account.
    Hope this helps anyone else with a similar problem.

  • TS3276 my company uses microsoft exchange mailing option. when i send an e-mail containing even a single attachement, my complete mail is converted into attachement, which is irritating for the receiver. kindly inform how i can get rid of this problem

    my company is using microsoft exchange server for the mails. When ever i send my mail, having even one single attachment, whole of the mail is converted into the attachment and the reciver receive the mail in the form of attachments.

    HI,
     I get following?  when run the test?  user is login to Domain A but accessing exchange in Domain B?

  • I get an error when using SMTP e-mail send

    When i try to use SMTP mail send.vi i get an error code 1 saying TCP cannot exchage information with SMTP vi. It mentions possible reason for it is not using GPIB card. But there is no relation between GPIB and TCP. I am not able to figure out the problem. Can anyone help ??
    For Latest TECH News check out my blog at http://directfromdigg.blogspot.com

    Hello,
    Error 1 is a very generic error. It means that either an input parameter is invalid or the gpib controller be the controller in charge, but not necessarily both. In the context of this problem, it is referring to an input that doesn’t appear to be correct and as you mentioned has nothing to do with GPIB. The most common problem with the SMTP Email VIs is an incorrect name to the ‘Mail Server’ input. The Mail Server is the name or IP address of the outgoing SMTP mail server you are using. The easiest way to find this information is to check with your IT department. I hope this helps. Best of luck!
    Regards,
    Chris J

  • Trigger mail(sending mail to respective person)when budget is release in PS

    Dear Sir,
    I want to trigger mail ( sending mail to respective person ) when budget is release in PS.
    Please help for following :
    Option 1 : User exit
    Option 2: Workflow.
    Regards
    Vinu

    Hi Vinod,
    You can acheive this using a Workflow. What you need to do is set an user status as Rbud-release budget, and when ever you project is set to this status a workflow will trigger to the concerned aggest assigned to workflow task. Here you can provide a user decision as 1. Approve 2. Reject. When ever workflow triggers, approver can see in his inbox the project budget in Cj30 by clicking object link to cj30 and if he feels it is ok then he can click Approve button this will take him to CJ32 screen where he can release the budget. IF the user feels Budget need to be revised then he will click reject this will send an email to the person responsible to revise the budget and at the same time user status will be reset back to previous user status.
    The above  method we have adapted for one of our client. This is done by a workflow consultant.
    Thanks
    regards
    kishore

  • Mail sending two mails when I mean to only send one

    Every time I send an e-mail with the new Mail program that comes with 10.5, it says that I have two e-mails sending from the outbox when I should only have one. I hope Mail isn't duplicating my secret and incriminating e-mails and sending them somewhere else!

    in the sent mailbox, can you see to whom you sent that email, are there two emails sent for that one you sent, or maybe more than one recipient in the "sent" field?
    also in mail>preferences>composing do you have cc or bcc "myself" checked or not?
    let me know.

  • Mail crashes when trying to send mail

    I am able to receive and read mail but when I select send mail, it brings up a new window and then crashes before I can enter any information.
    It also has large circles (approx. 3/4 inch) where it would normally list the number of new emails in a given account.
    Crash report:
    Date/Time: 2007-07-23 10:57:50.227 -0400
    OS Version: 10.4.10 (Build 8R218)
    Report Version: 4
    Command: Mail
    Path: /Applications/Mail.app/Contents/MacOS/Mail
    Parent: WindowServer [63]
    Version: 2.1 (752)
    Build Version: 1
    Project Name: MailViewer
    Source Version: 7520000
    PID: 238
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000068

    Is this what you needed?
    Date/Time: 2007-07-23 16:32:00.290 -0400
    OS Version: 10.4.10 (Build 8R218)
    Report Version: 4
    Command: Mail
    Path: /Applications/Mail.app/Contents/MacOS/Mail
    Parent: WindowServer [63]
    Version: 2.1 (752)
    Build Version: 1
    Project Name: MailViewer
    Source Version: 7520000
    PID: 246
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000068
    Thread 0 Crashed:
    0 com.apple.WebCore 0x95aabfc0 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 32
    1 <<00000000>> 0xa59d1e2c findValue(char const*, unsigned)::wordlist_value + 2236
    2 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    3 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    4 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    5 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    6 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    7 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    8 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    9 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    10 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    11 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    12 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    13 com.apple.WebCore 0x95aac034 WebCore::RenderBlock::createLineBoxes(WebCore::RenderObject*) + 148
    14 com.apple.WebCore 0x95aac34c WebCore::RenderBlock::constructLine(WebCore::BidiIterator const&, WebCore::BidiIterator const&) + 300
    15 com.apple.WebCore 0x95ab29c8 WebCore::RenderBlock::layoutInlineChildren(bool) + 3000
    16 com.apple.WebCore 0x95ac5a54 WebCore::RenderBlock::layoutBlock(bool) + 996
    17 com.apple.WebCore 0x95ab6ca0 WebCore::RenderBlock::layout() + 48
    18 com.apple.WebCore 0x95ac5228 WebCore::RenderBlock::layoutBlockChildren(bool) + 1176
    19 com.apple.WebCore 0x95ac5a8c WebCore::RenderBlock::layoutBlock(bool) + 1052
    20 com.apple.WebCore 0x95ab6ca0 WebCore::RenderBlock::layout() + 48
    21 com.apple.WebCore 0x95ac5228 WebCore::RenderBlock::layoutBlockChildren(bool) + 1176
    22 com.apple.WebCore 0x95ac5a8c WebCore::RenderBlock::layoutBlock(bool) + 1052
    23 com.apple.WebCore 0x95ab6ca0 WebCore::RenderBlock::layout() + 48
    24 com.apple.WebCore 0x95ac5228 WebCore::RenderBlock::layoutBlockChildren(bool) + 1176
    25 com.apple.WebCore 0x95ac5a8c WebCore::RenderBlock::layoutBlock(bool) + 1052
    26 com.apple.WebCore 0x95ab6ca0 WebCore::RenderBlock::layout() + 48
    27 com.apple.WebCore 0x95ac5228 WebCore::RenderBlock::layoutBlockChildren(bool) + 1176
    28 com.apple.WebCore 0x95ac5a8c WebCore::RenderBlock::layoutBlock(bool) + 1052
    29 com.apple.WebCore 0x95ab6ca0 WebCore::RenderBlock::layout() + 48
    30 com.apple.WebCore 0x95ac5228 WebCore::RenderBlock::layoutBlockChildren(bool) + 1176
    31 com.apple.WebCore 0x95ac5a8c WebCore::RenderBlock::layoutBlock(bool) + 1052
    32 com.apple.WebCore 0x95ab6ca0 WebCore::RenderBlock::layout() + 48
    33 com.apple.WebCore 0x95ac5228 WebCore::RenderBlock::layoutBlockChildren(bool) + 1176
    34 com.apple.WebCore 0x95ac5a8c WebCore::RenderBlock::layoutBlock(bool) + 1052
    35 com.apple.WebCore 0x95ab6ca0 WebCore::RenderBlock::layout() + 48
    36 com.apple.WebCore 0x95ad1958 WebCore::RenderView::layout() + 200
    37 com.apple.WebCore 0x95a472e0 WebCore::FrameView::layout(bool) + 1392
    38 com.apple.WebCore 0x95b66a70 WebCore::Selection::toRange() const + 80
    39 com.apple.WebKit 0x957b3d8c -[WebView(WebViewEditing) selectedDOMRange] + 60
    40 com.apple.mail 0x00061fcc 0x1000 + 397260
    41 com.apple.mail 0x000604ec 0x1000 + 390380
    42 com.apple.Foundation 0x92becc04 __NSFireDelayedPerform + 304
    43 com.apple.CoreFoundation 0x907f1578 __CFRunLoopDoTimer + 184
    44 com.apple.CoreFoundation 0x907ddef8 __CFRunLoopRun + 1680
    45 com.apple.CoreFoundation 0x907dd4ac CFRunLoopRunSpecific + 268
    46 com.apple.HIToolbox 0x9329ab20 RunCurrentEventLoopInMode + 264
    47 com.apple.HIToolbox 0x9329a12c ReceiveNextEventCommon + 244
    48 com.apple.HIToolbox 0x9329a020 BlockUntilNextEventMatchingListInMode + 96
    49 com.apple.AppKit 0x9377fae4 _DPSNextEvent + 384
    50 com.apple.AppKit 0x9377f7a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
    51 com.apple.AppKit 0x9377bcec -[NSApplication run] + 472
    52 com.apple.AppKit 0x9386c87c NSApplicationMain + 452
    53 com.apple.mail 0x000871d8 0x1000 + 549336
    54 com.apple.mail 0x00087080 0x1000 + 548992

Maybe you are looking for

  • Unable to copy file from local drive to external drive

    I'm attempting to copy a 7gb file from my local drive on my iMac to an external firewire drive. Whenever I try to do this I get the following message: Sorry, the operation could not be completed because an unexpected error occurred. I've rebooted, ch

  • Itunes stops working when i try to watch movies

    When I try to watch videos or movies through ITUNES it immediatly stops working, and shuts Itunes down.

  • Iphone wont open

    I used my iPhone 5 for Skype but then it heated up and now it's not opening. what should i do?

  • Ipad2 with ios8.1 is still extreme SLLLOOOOOW

    I updated from iOS 8.02 to 8.1 My problem, that  the iPad  is unresponsive and all feels very SLOOOOOWWW still remains. My iPad is nearly unusable. APPLE if you cannot deliver an iOS8 which runs as fast as iOS7 please let your users downgrade to iOS7

  • My links don't work when I combine another file with the pdf

    My internal bookmarked links don't work when I combine another file with the pdf. The external links continue to work fine, though. This doesn't make any sense to me at all ... but I'm hoping one of you kind folk can help?