Mail Server Error: imtpunix[302]: DBERROR: critical database situation

This error shows up in the Mail Access log. Once the error occur mail services stop until the server is restarted. a reboot and a database rebuild takes care of thing, but the error keeps coming back. I haven't been able to find a pattern to when the error occurs although the last two nights it seems to have crapped out just about the time the nightly back ups (retrospect 6.1.126) run ... but that doesn't make sense because the volume containing the os and mail isn't part of the nightly backup.
In addition to serving as a mail server, this machine is hosting a small (extremely low volume website and shareing files for 7 users). Installation and file locations is all standard locations.
osx server 10.4.10 All latest server upgrades and security patches have been installed. disk permissions have been verified. disk space is >50% available.
any suggestions?

Sounds like OSX Server?
Consider posing your query in the apporpriate forum?
http://discussions.apple.com/category.jspa?categoryID=96

Similar Messages

DBERROR: critical database situation

Log files say DBERROR: critical database situation
Used mailbfr -f and rebuilt the database after discovering some users sent mail wasn't being received. The problem appeared to clear up. Within a few days I am having the same problems again. Some of the users are the same and some are new since the rebuild. I haven't made it out to the site to check the logs but I'll bet they have the same error again. What causes Cyrus to get angry and hose my happy server? How does one fix this? Also, embarrassed to admit I don't have a good backup of the database and not sure how to get one.I tried using mailbfr -b but I wasn't able to get it to back anything up and kept saying /etc/var didn't exist. I am sure I was doing something wrong but had limited access time to the server. Please help.

First things first... Verify/Repair your drive(s) with DiskUtility
Then
sudo mailbfr -f
sudo mailbfr -o
If this doesn't resolve the situation, then you'll need to post logs. I'd like to see the error you are experiencing with mailbfr, it could certainly be a clue.
You asked about backing up the database......
mailbfr actually removes the database (it's not deleted, but renamed so it's not active) then the entire database is reconstructed. The database is not as important to backup as the mail store folder (default = /var/spool/imap). If your config is OK and you have the imap mail store, you can recontruct a database at any time.
Post more info and we'll get you through this.
Jeff

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Have you tried deleting the account and re-adding it on the phone?
What version of Exchange server are you running?

Critical database situation- desperate for solution!

I have repeatedly had the mail service fail with the critical database situation error. I have rebuilt the datbase using the terminal program suggested in various threads on this topic. No matter how many times I do it, inevitably it happens again. Sometimes it may be weeks sometimes hours. I have read every thread I can find on this problem and see no solution. Mine is NOT an upgraded server from 10.3 it is a fresh install of 10.4 with all the updates. This began happening about 6 weeks ago and I can't find a solution. I am willing to consider whatever radical moves may be needed at this point. Sometimes it even brings everything to a halt and my server restarts.

I just had a client who had repeated db errors. He was running mail data from a 'SoftRAID' mirrored set. We moved his data to another volume and the db corruption stopped (with 2 months + no errors vs weekly db corruption)
I'm not implicating SoftRAID.... any volume which has trouble could cause repeated db errors.
If your other troubleshooting leads you nowehere, you may want to try moving the data to an alternate volume as a test.
Jeff'

Outgoing/offline mail server errors (143 /and/ SSL checked?)

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

Windows Mail server error 501

Every time I foreword an address or web page etc. using the "File" E-Mail Link the following happens. The e-mail is sent but there are five old error messages shown below. The e-mail goes trough but I have to hit the [close] box to clear the sent message. I can't figure out how to remove the old rejected e-mail addresses.
Here is a copy of the message.
The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was '*****@picturetrail.comAccount:2051017:return'. Subject 'Account:2051017:return', Account: 'Dave's Mail', Server: 'smtp.att.yahoo.com', Protocol: SMTP, Server Response: '501 Syntax error in arguments', Port: 465, Secure(SSL): Yes, Server Error: 501, Error Number: 0x800CCC79

This has nothing to do with Firefox. Mail is being rejected as you have set up your mail in a wrong way with incorrect ports etc.. Please contact the appropriate people for this issue and not here.

Mail Server Error

Hello,
I have checked to activate SMTP in Server Manager.
Ben when I want to add : enable inbound email, it takes a lot of time to save, the checkbox uncheckes itself, and in the system.log, I have this error :
May 27 20:45:13 tmachinix servermgrd[13357]: Exception in doCommand for module servermgr_mail: *** -[NSCFString appendString:]: nil argument
May 27 20:45:13 tmachinix servermgrd[13357]: --request was {\n command = writeSettings;\n configuration = {\n imap = {\n configdirectory = "";\n };\n postfix = {\n "enable_smtp_in" = 1;\n "virus_db_update_enabled" = 1;\n };\n };\n optionalArguments = {\n parameters = (\n "imap:configdirectory",\n "imap:enable_imap",\n "imap:enable_pop",\n "imap:enable_pop",\n "imap:enable_quota_warnings",\n "imap:enable_sieve",\n "imap:imap_auth_clear",\n "imap:imap_auth_cram_md5",\n "imap:imap_auth_gssapi",\n "imap:imap_auth_login",\n "imap:imap_auth_plain",\n "imap:log_level",\n "imap:lmtp_luser_relay",\n "imap:lmtp_luser_relay_enabled",\n "imap:lmtp_over_quota_perm_failure",\n "imap:max_imap_connections",\n "imap:notification_server_enabled",\n "imap:notification_server_address",\n "imap:notification_server_username",\n "imap:notification_server_password",\n "imap:notification_server_port",\n "imap:partitions",\n "imap:partition-default",\n "imap:pop_auth_apop",\n "imap:quotawarn",\n "imap:quota_custom_error",\n "imap:quota_custom_warning",\n "imap:quota_warn_frequency_days",\n "imap:servername",\n "imap:tls_server_options",\n "imap:tls_cert_file",\n "imap:tls_key_file",\n "imap:tls_ca_file",\n mailman,\n "postfix:always_bcc",\n "postfix:always_bcc_enabled",\n "postfix:auto_learn",\n "postfix:bayesian_enabled",\n "postfix:disable_vrfy_command",\n "postfix:enable_smtp",\n "postfix:enable_smtp_in",\n "postfix:enable_smtp_out",\n "postfix:enable_var_mail",\n "postfix:enable_virtual_domains",\n "postfix:full_reporting",\n "postfix:log_level",\n "postfix:log_rolling_days",\n "postfix:log_rolling_days_enabled",\n "postfix:luser_relay_enabled",\n "postfix:mailbox_transport",\n "postfix:black_hole_domains",\n "postfix:maps_rbl_domains_enabled",\n "postfix:message_size_limit",\n "postfix:message_size_limit_enabled",\n "postfix:msg_body_checks_enabled",\n "postfix:msg_header_checks_enabled",\n "postfix:mydestination",\n "postfix:mydomain",\n "postfix:myhostname",\n "postfix:mynetworks",\n "postfix:mynetworks_enabled",\n "postfix:mynetworks_style",\n "postfix:reject_invalid_host_enabled",\n "postfix:reject_unknown_host_enabled",\n "postfix:reject_non_FQDN_enabled",\n "postfix:reject_unknown_client_enabled",\n "postfix:reject_unauth_piplining_enabled",\n "postfix:relayhost",\n "postfix:relayhost_enabled",\n "postfix:smtp_sasl_auth_enable",\n "postfix:smtp_auth_relay_dict",\n "postfix:required_hits",\n "postfix:safe_reporting",\n "postfix:smtp_reject_list",\n "postfix:smtp_reject_list_enabled",\n "postfix:smtp_body_checks",\n "postfix:smtp_uce_controlls",\n "postfix:smtpd_pw_server_security_options",\n "postfix:spam_action",\n "postfix:spam_domain_name",\n "postfix:spam_log_level",\n "postfix:spam_notify_admin",\n "postfix:spam_notify_admin_email",\n "postfix:spam_ok_languages",\n "postfix:spam_ok_locales",\n "postfix:spam_quarantine",\n "postfix:spam_rewrite_subject",\n "postfix:spam_scan_enabled",\n "postfix:spam_subject_tag",\n "postfix:strict_rfc821_envelopes",\n "postfix:smtpd_helo_required",\n "postfix:text_only_attachments",\n "postfix:tls_server_options",\n "postfix:smtpd_tls_cert_file",\n "postfix:smtpd_tls_key_file",\n "postfix:smtpd_tls_CAfile",\n "postfix:virus_scan_enabled",\n "postfix:virus_action",\n "postfix:virus_scan_enabled",\n "postfix:virus_db_update_enabled",\n "postfix:virus_db_update_days",\n "postfix:virus_db_last_update",\n "postfix:virus_notify_admin",\n "postfix:virus_notify_admin_email",\n "postfix:virus_notify_recipients",\n "postfix:virus_notify_remote_recipients",\n "postfix:virus_quarantine",\n "postfix:virtual_domains",\n "postfix:group_expansion",\n nil\n );\n };\n}
(END)
And if I want to use the assistant to configure the email module, I get this error :
« NIL_RESPONSE_ERR (*** -[NSCFString appendString:]: nil argument) » during « writeSettings »
Please, help me.

Hello arnobeck, I would start with the basics, can you receive emails?
Everything bellow refers to settings under the mail service.
Are your Domain and Host names set to what you want? - General tab
Make sure Kerberos or CRAM-MD5 are checked. - Advanced tab
Check you have certificates selected for both SMTP SSL: and IMAP and POP SSL:. - Advanced tab
Check the certificates match the domain name set in the General tab. - Advanced tab
P.S. I'm not the most advanced with mail server service, but hopefully I can help.
Regards,
Graham

Mail Server Error - 21055: auth: Error: od?

Hi,
Just upgraded to OSX 10.8 Mountain Lion, now my email services have gone AWOL.
The server logs are telling me [DateTime domain.com] log[21055]:auth: Error: od (username, ip address): authentication failed for user=me, method=DIGEST-MD5
From a client (MS offlook) point of view I'm getting :
Your message did not reach some or all of the intended recipients.
Subject:    test
      Sent: 06/08/2012 19:09
The following recipient(s) cannot be reached:
      '[email protected]' on 06/08/2012 19:10
            451 4.3.5 <unknown[ip address]>: Client host rejected: Server configuration error
This used to work quite well with Lion and the Server Admin Tools.
Is there anything I can try?
Thanks in advance,
Jeff.

Thanks for getting back to me red shift, everything is now up and working again.
I think it was somthing to do with some folder permissions and some mail settings. The mail server GUI supplied with Mountain Lion is all but useless and didn't help in any way in tracking down or resolving the problem. So, I've taken the plunge and set up MailServ for Mountain lion, its a much better mail server GUI client, and seemed to correct some of my postfix settings.
I've tinkered a bit with command line mail stuff, but not quite at a level where I can fully administer it.
Are there any good command line resources out there? This is somthing I need to improve on.
Cheers.

UTL_SMTP: can't connect to remote mail server (error: 421)

I'm trying to execute this command as SYS:
exec MYSCHEMA.send_mail_via_utl_smtp('[email protected]', '[email protected]', 'my subject', 'my message','mail.mydomain.com');
and I get this error:
Error starting at line 8 in command:
exec MYSCHEMA.send_mail_via_utl_smtp('[email protected]', '[email protected]', 'my subject', 'my message','mail.mydomain.com');
Error report:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 29
ORA-06512: at "SYS.UTL_SMTP", line 108
ORA-06512: at "SYS.UTL_SMTP", line 150
ORA-06512: at "MYSCHEMA.SEND_MAIL_VIA_UTL_SMTP", line 17
ORA-06512: at line 1
29278. 00000 - "SMTP transient error: %s"
*Cause:    A SMTP transient error occurred.
*Action:   Correct the error and retry the SMTP operation.
However, I can telnet successfully as root user to mail.mydomain.com. The stored procedure is:
create or replace
PROCEDURE send_mail_via_utl_smtp(
sender IN VARCHAR2,
recipient IN VARCHAR2,
subject IN VARCHAR2 DEFAULT NULL,
message IN VARCHAR2,
mailhost IN VARCHAR2 DEFAULT 'mailhost'
AS
mail_conn UTL_SMTP.connection;
crlf CONSTANT VARCHAR2(2) := CHR(13) || CHR(10);
smtp_tcpip_port CONSTANT PLS_INTEGER := 25;
BEGIN
mail_conn := UTL_SMTP.OPEN_CONNECTION(mailhost, smtp_tcpip_port);
UTL_SMTP.HELO(mail_conn, mailhost);
UTL_SMTP.MAIL(mail_conn, sender);
UTL_SMTP.RCPT(mail_conn, recipient);
UTL_SMTP.DATA(mail_conn, SUBSTR(
'Date: ' || TO_CHAR(SYSTIMESTAMP, 'Dy, dd Mon YYYY HH24:MI:SS TZHTZM') || crlf
|| 'From: ' || sender || crlf
|| 'Subject: ' || subject || crlf
|| 'To: ' || recipient || crlf
|| message,
1, 32767));
UTL_SMTP.QUIT(mail_conn);
END send_mail_via_utl_smtp;
Note that mail.mydomain.com is sitting on the application server, and not the database server (not sure if that is important here). Previously, I set things up doing the following as SYS user:
# cd $ORACLE_HOME/rdbms/admin
# sqlplus / as sysdba
SQL> @utlmail.sql;
Package created.
Synonym created.
SQL> @prvtmail.plb;
Package created.
Package body created.
Grant succeeded.
Package body created.
No errors.
SQL> ALTER SYSTEM SET smtp_out_server = "mail.mydomain.com" SCOPE=MEMORY;
System altered.
SQL> show parameter smtp_out_server
NAME TYPE VALUE
============
smtp_out_server string mail.mydomain.com
SQL> exec DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('my_acl_email.xml','for my db acl to send email', 'MYSCHEMA', TRUE, 'connect');
PL/SQL procedure successfully completed.
SQL> exec DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('my_acl_email.xml','mail.mydomain.com', 25, NULL);
PL/SQL procedure successfully completed.
It appears that the SYS user is permitted by the ACL, but is somehow blocked access to mail.mydomain.com on the application server. Are there any Linux configurations that need to occur in implementing this process? Or, am I missing something in configuring Oracle. I'm using 11.2.0.1.0. This is my first time setting this up. Does the database need to be cycled down then back up for any of these settings to take place?
Edited by: tem on Apr 20, 2012 2:45 PM

Thanks Justin, that helps a lot. Now, with the 'AUTH LOGIN' command, I'm getting the error:
ORA-29279: SMTP permanent error: 503 AUTH command used when not advertised
ORA-06512: at "SYS.UTL_SMTP", line 29
ORA-06512: at "SYS.UTL_SMTP", line 110
ORA-06512: at "SYS.UTL_SMTP", line 170
ORA-06512: at "JCLOCKGEN.SEND_MAIL_VIA_UTL_SMTP", line 22
ORA-06512: at line 1
29279. 00000 - "SMTP permanent error: %s"
*Cause:    A SMTP permanent error occurred.
*Action:   Correct the error and retry the SMTP operation.
UPDATE:
Actually, my procedure above uses this line:
UTL_SMTP.HELO(mail_conn, mailhost);
But I noticed Justin's code above uses:
UTL_SMTP.EHLO(mail_conn, mailhost);
When I change the HELO to EHLO, everything works fine. Here's the final code:
create or replace
PROCEDURE send_mail_via_utl_smtp(
sender IN VARCHAR2,
recipient IN VARCHAR2,
subject IN VARCHAR2 DEFAULT NULL,
message IN VARCHAR2,
mailhost IN VARCHAR2 DEFAULT 'mailhost',
auth_username IN VARCHAR2,
auth_password IN VARCHAR2
AS
mail_conn UTL_SMTP.connection;
crlf CONSTANT VARCHAR2(2) := CHR(13) || CHR(10);
smtp_tcpip_port CONSTANT PLS_INTEGER := 25;
BEGIN
mail_conn := UTL_SMTP.OPEN_CONNECTION(mailhost, smtp_tcpip_port);
UTL_SMTP.EHLO(mail_conn, mailhost);
--------------BEGIN AUTHENTICATION--------------
UTL_SMTP.command(mail_conn, 'AUTH LOGIN');
utl_smtp.command(mail_conn, utl_raw.cast_to_varchar2(utl_encode.base64_encode( utl_raw.cast_to_raw(auth_username))));
utl_smtp.command(mail_conn, utl_raw.cast_to_varchar2(utl_encode.base64_encode( utl_raw.cast_to_raw(auth_password))));
--------------END AUTHENTICATION--------------
UTL_SMTP.MAIL(mail_conn, sender);
UTL_SMTP.RCPT(mail_conn, recipient);
UTL_SMTP.DATA(mail_conn, SUBSTR(
'Date: ' || TO_CHAR(SYSTIMESTAMP, 'Dy, dd Mon YYYY HH24:MI:SS TZHTZM') || crlf
|| 'From: ' || sender || crlf
|| 'Subject: ' || subject || crlf
|| 'To: ' || recipient || crlf
|| message,
1, 32767));
UTL_SMTP.QUIT(mail_conn);
END send_mail_via_utl_smtp;
Edited by: tem on Apr 20, 2012 5:55 PM

Mail Server Error: Fatal error: can't write proc file

I am a novice with OS X Server. It has been running fine for months but now I am having trouble. I get the following error log in SA:
Dec 3 19:19:24 MasterControl imap[1761]: Fatal error: can't write proc file
Dec 3 19:19:25 MasterControl imap[1763]: DBERROR: dbenv->open '/var/imap/db' failed: Permission denied
Dec 3 19:19:25 MasterControl imap[1763]: DBERROR: init() on berkeley
Dec 3 19:19:25 MasterControl imap[1763]: IOERROR: creating /var/imap/proc/1763: No space left on device
The drive has lots of space left on it.
Also in the maintenance accounts section, it states for every user there is an unknown mailbox path in the mailbox store.
Any help would be appreciated.

I rechecking the situation, the drive is showing that it is totally full. Its a 60 gig drive that yesterday had 10 gigs on it...now it is full. Not sure where the other 50 came from or where they are. I've just deleted some programs and the drive is still showing full.

Pop3 mail server error

For some reason whenever I launch the Mail App, on my MSN account it tells me "*Cannot Get Mail, the connection to the server "pop3.live.com" failed.* "
Do I need to change the settings or delete the account and then add it back again? Any help is greatly appreciated.

Go into the mail account settings and make sure the POP and SMTP server names and passwords are entered correctly. You shouldn't have to delete the accounts, but if all else fails, delete and re-enter them.

Is this a Mail Server Error?

I'm trying to remove all errors, that are logged every five minutes.
Some I found in the discussions and removed them.
https://discussions.apple.com/thread/4207019?start=15&tstart=0
This was helpfull. But some errors left.
Jan 26 10:21:18 server com.apple.launchd[1] (com.apple.collabd.expire[1577]): Exited with code: 1
Jan 26 10:21:18 server.mydomain.com sandboxd[1581] ([1578]): collabpp(1578) deny file-read-data /Applications/Server.app/Contents/ServerRoot/usr/lib/libpq.5.5.dylib
Jan 26 10:21:18 server kernel[0]: Sandbox: sandboxd(1581) deny mach-lookup com.apple.coresymbolicationd
Jan 26 10:21:21 server.mydomain.com collabd[154]: [CSContentService:47 411c000 +11ms] Detected Magic Superuser Auth Token
I don't know what it is. Can someone help?

Just a suggestion, but wouldn't it be better to add this as continuation to the previous thread instead of starting a new thread.....? The previous solution poster may have more insight into this.

Exchange synchronises all folders but Inbox error Cannot Get Mail Server Error!

Initially I lost the inbox of my IPad running IOS 5 with my iPhone 4GS continuing to sync with my Exchange Server 2007 however changing mail setting on my phone has now stopped that working as well and I now have lost access to remote mail altogether.
I can still send mails from my Ipad and Iphone though if I send to myself they do not appear in the inbox but do appear in the Sent items.
If I delete mails they appear in deleted items
I have upgraded my IPad 3 to IOS 6 which has not changed anything. I have also tried an IPad 2 and that does not like my mailbox either. Tonight I created a new user on the server and sent mail to that mailbox. I set the settings on the IPad and the Inbox and other folders worked with no issues.
This problem started 2 weeks ago and before that I have never had problems with IOS devices syncing mail from my Exchange 2007 server.
My wife has a IPad 2 that links to the same Exchange Server and she has experienced none of these problems.
Any pointers on this would be most appreciated.
Richard

OK, we fixed my boss' iPad issue. We are using Exchange 2010. Somehow, there was an issue with the device association in his Exchange account. We had to remove the device association from his Exchange account, delete the account from his iPad, then re-add the account.. He is now syncing again.
You may be able to remove the device association in OWA. Let us know if this works for you.
As to the cause of the issue, it is still unknown.

Since update, my iPhone 3 and iPad give me a mail server error for one of my email accounts. It says I have to correct mail settings, but I always use to get this email before.

I receive a "cannot get mail" message when my iPhone and iPad try to retrieve one of my email accounts. Since updating, it says to verify account information in mail settings. I haven't changed information.

Rarely data and settings are corrupted during an update. What happened when you verified the mail account settings as suggested? Even if they appear OK, I suggest deleting and reinstalling the account.

Mail server DBERROR

Hi guys ,
_we have Problem with mail server in Leopard Server. i got the error message on log_
_*(under the mail Access)*_
Nov 15 10:23:41 server ctl_cyrusdb[3337]: DBERROR: critical database situation
Nov 15 10:23:46 server master[916]: Warning: Database panic alert, exiting to initiate automatic database clean-up
Nov 15 10:23:46 server ctl_cyrusdb[3345]: cleaning up corrupted database files in: /var/imap/db
Nov 15 10:23:46 server ctl_cyrusdb[3345]: ----: removed file: __db.001
Nov 15 10:23:46 server ctl_cyrusdb[3345]: ----: removed file: __db.002
Nov 15 10:23:46 server ctl_cyrusdb[3345]: ----: removed file: __db.003
Nov 15 10:23:52 server ctl_cyrusdb[3345]: ----: removed file: __db.004
Nov 15 10:23:52 server ctl_cyrusdb[3345]: ----: removed file: __db.005
Nov 15 10:23:52 server ctl_cyrusdb[3345]: ----: removed file: log.0000000001
in my apple mail client, i can not received any mail .
i tried to restart postfix using sudo postfix reload, and stop , start ect
no luck so far
Help me .. .....
thanks in advance

Hi itred to use this information on
href:http://support.apple.com/kb/HT3120?viewlocale=en_US
but no luck till now. when i typed
su rootmv /var/imap /var/imap.oldmkdir /var/imap/usr/bin/cyrus/tools/mkimapchown -R _cyrus:mail /var/imap/usr/bin/cyrus/bin/reconstruct -i
command
its asking the password . so i typed the password . then i got the message saying "SORRY"
i dont know why. the password is correct
any TIPS
thanks

Mail Server Error: imtpunix[302]: DBERROR: critical database situation

Similar Messages

Maybe you are looking for