Mail Service
Dear All, I am migrating from Exchange server to our new Xserve.
There is a mailbox in exchange that we used to catch all the incoming and outgoing mail of the whole organization. Where we can keep archiving all mail in and out, the department managers can logon as IMAP to view all the emails.
Is there a way I can do this with the mail service on my Xserve? Any help will be greatly appreciate and thank you in advance.
JM
Both, the E-mail client and that Social-media client were proxy services handled by a server at Nokia. Those services got turned-off in November. Which E-mail provider(s) do you want to use? Which Social-media service(s) do you want to use? Then, we are able to give step-by-step guides how to use them today, without changing your phone.
Similar Messages
-
Outgoing mail service offline charter
I cannot send email from my imac. Out going mail service shows offline with no other options. I can send email from my iphone. Help?
maybe some some helphere
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=off%20line%20email%2010.6.6
http://support.apple.com/kb/index?page=search&product=&q=send%20email%20iPhone&s rc=support_site.kbase.search.searchresults -
Setting up mail services. Name of server needs to be changed?
I setup my xserve with snow leopard. By default it was named server.ourcompanyname.private.
Here is my problem Im trying to host our company web site along with mail services. Need to bring all this in-house.
I have with my web provider 5 dedicated IP address, and router address. I bridged the modem to an airport extreme to hand out all the ip address and DHCP, this was done with apple support.
I need advise on how to go about setting up all the services. Can the name of the server be changed without causing major problems?
Any advise would be appreciated.One other note. Can I change the .private. to .com and will this help me setup mail and hosting services?
-
ERROR: Cannot start mail services, configuration directory does not exist
I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff -
How do I set up Mail service for simple IMAP with SSL?
This should be easy but something isn't working. I have an Xserve with 10.6. I've enabled the Mail service, and want to add this server as an Account under Entourage. I've put in the IP address, my username/password, etc. but something isn't working. It appears under the Accounts folder tree, but when I try to send an email, I have a window that says "4.7.0 TLS not available due to local problem", Error -17099". I've also seen errors telling me the password is being sent in cleartext and I can't see where I enable the same (SSL, password needed) settings on the client and the server menus. Can someone clue me in - what are the right settings on both ends to have a simple IMAP w/o cleartext passwords? I had this working fine in 10.4 Server... Thanks!
MikeI see dropdown menus for SMTP SSL and IMAP/POP SSL. I have them both set as "Require"
Do not to this if your server is handling incoming mail from outside your network.
Few remote mail servers will use SSL, so if your server requires SSL then you will not be able to receive mail from outside your domain.
'Use', on the other hand, advertises the fact your server supports SSL, so clients and remote servers can use if if they like, but this still allows other mail in.
What should "Authentication" be - "Login" or "Plain"
Do not use Plain unless you absolutely trust all your clients (i.e. they're all on a LAN or all using SSL). Plain sends an unencrypted password over the wire, which is susceptible to sniffing.
what will the client be using?
Whatever you set it to.
The client complains about a correct root certificate not being installed).
Are you using a self-signed certificate? if so, you're going to get that unless you do a lot of extra work. Getting a real certificate from a trusted authority should resolve this.
As for the slow connections, the use of SSL shouldn't significantly impact connection or delivery/transfer times, so something else is amiss. -
Why cant i disable mail service ?
Mail service got enabled when I enabled some other services (don't know which one) i checked a couple and it got enabled, i tried to disable it then but it wouldn't let me, back then i didn't pay much attention to it so of course it's not configured. Right now the server is going crazy with disk IO, ran iotop and found out there are 2 processes to blame, 1 is mds (i'll murder spotlight soon) and the other is qmgr which from the man page i found it's mail related, my mail is hosted on gmail so i have no intention of using this service. If i click stop nothing happends, same if i uncheck it under services.
this is the ouput on the syslog when i try to stop
servermgrd[69]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) syncClientServicesConfigRecord]: Error writing ClientServices config record: Error Domain=com.apple.OpenDirectory Code=4001 UserInfo=0x10652ad30 "Unable to set value or values for dsAttrTypeStandard:XMLPlist in the record ClientServices."
servermgr_info: markrunning_servicesconfigured(): marked running services configured: com.apple.ServerAdmin.DNS, com.apple.ServerAdmin.SWUpdate, com.apple.ServerAdmin.Web, com.apple.ServerAdmin.NFS, com.apple.ServerAdmin.DirectoryServices
also, my syslog is full of
postfix/qmgr[3830]: warning: connect #1 to subsystem private/rewrite: Connection refused
I'm guessing it's required by some other service, i currently have...
DNS
Mail -> DIE
NFS
Open Directory
Software Update
Web
Xgrid - Stopped ( just testing )
Is there any way to kill it, or is my only way around it to figure out what's wrong with it (no one is using it for mail so i don't get why is it so busy).Unchecked 'Enable SMTP', 'Enable IMAP' and 'Enable POP', then checked 'Deliver to /var/mail
That seemed to 'disable the mail service'
As for disk usage, i'm running a cron job every minute so que queue had close to 6k mails it couldn't deliver. deleted them all " sudo postsuper -d ALL " and redirected output on the cron job to /dev/null -
Mail Services connection times out after 10.5.8 - 10.6.4 upgrade
I have been running a mail server on my macosxserver02.binghamton.edu (128.226.xx.x) for Podcast Producer email notifications only. The mail service has been running fine until I recently upgraded the server to Apple's latest server software: Snow Leopard Server (10.6.4).
After the upgrade I'm no longer able to receive mail to the mail server from outside it's domain (macosxserver02.binghamton.edu). I can send and receive mail locally from within that domain. I can send mail outside of the domain without any trouble to my personal email account [email protected], but not my work account: [email protected]. If I try to send from outside the domain -- say with my Binghamton Univ account -- the mail bounces back with this message:
Delivery to the following recipient has been delayed:
[email protected]
Message will be retried for 2 more day(s)
Technical details of temporary failure:
The recipient server did not accept our requests to connect. Learn more at http://mail.google.com/support/bin/answer.py?answer=7720
[macosxserver02.binghamton.edu (1): Connection timed out]
---- Original message -----
Received: by 10.224.102.202 with SMTP id h10mr6012071qao.49.1277903965341;
Wed, 30 Jun 2010 06:19:25 -0700 (PDT)
Return-Path: <[email protected]>
Received: from [128.226.62.7] ([128.226.62.7])
by mx.google.com with ESMTPS id v20sm41975621qce.46.2010.06.30.06.19.24
(version=TLSv1/SSLv3 cipher=RC4-MD5);
Wed, 30 Jun 2010 06:19:24 -0700 (PDT)
From: Cheryl Tarbox <[email protected]>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Subject: another attempt
Date: Wed, 30 Jun 2010 09:19:22 -0400
Message-Id: <[email protected]>
To: [email protected],
[email protected]
Mime-Version: 1.0 (Apple Message framework v1078)
X-Mailer: Apple Mail (2.1078)
One thing to note about the .binghamton.edu domain is that we recently switched to Google Mail and .binghamton.edu is our branded domain within google.com.
DNS is managed on another server. I had an MX record added to my server this morning.
I have these ports open on my firewall: 143, 993, 25, 587 (POP is not enabled)
In ServerAdmin>Mail>Settings>Relay 'Accept SMTP relays only from these hosts and networks' is checked with
127.0.0.0/8
128.226.62.0/26 (my local subnet)
In ServerAdmin>Mail>Settings>Filters Junk Mail and Virus filtering is not enabled, so greylisting should not be a problem. I did confirm this line in main.cf: smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reje ct_unauth_destination permit
10MB quota is set, Mailing Lists not enabled, Logging set at Information
In ServerAdmin>Mail>Settings>Advanced>Security I am not using SSL. I do have a valid certificate that I would like to use after I get this back up and running.
In ServerAdmin>Mail>Settings>Hosting 'Include server's domain as local host alias' is checked with
localhost
binghamton.edu
Virtual hosting is not enabled.
Here is the output of: postconf -n:
macosxserver02:~ academic$ postconf -n
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = $double_bounce_sender
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter =
cyrus_sasl_config_path =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
data_directory = /var/lib/postfix
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_failed_cohort_limit = 1
default_destination_concurrency_limit = 20
default_destination_concurrency_negative_feedback = 1
default_destination_concurrency_positive_feedback = 1
default_destination_rate_delay = 0s
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
destination_concurrency_feedback_debug = no
detect_8bit_encoding_header = yes
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
empty_address_relayhost_maps_lookup_key =
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred,defer
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
hopcount_limit = 50
html_directory = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_body_checks =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
lmtp_destination_rate_delay = $default_destination_rate_delay
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_header_checks =
lmtp_host_lookup = dns
lmtp_initial_destination_concurrency = $initial_destination_concurrency
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mime_header_checks =
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_nested_header_checks =
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_cache_name =
lmtp_sasl_auth_cache_time = 90d
lmtp_sasl_auth_soft_bounce = yes
lmtp_sasl_mechanism_filter =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_fingerprint_cert_match =
lmtp_tls_fingerprint_digest = md5
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 9
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
local_destination_concurrency_limit = 2
local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
local_destination_rate_delay = $default_destination_rate_delay
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_initial_destination_concurrency = $initial_destination_concurrency
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay = pcastadmin
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20080902
mail_spool_directory = /var/mail
mail_version = 2.5.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = dovecot
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 10485760
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_end_of_header_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname, localhost.$mydomain, localhost, binghamton.edu, $mydomain
mydomain = binghamton.edu
mydomain_fallback = localhost
myhostname = macosxserver02.binghamton.edu
mynetworks = 127.0.0.0/8,128.226.62.0/26
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_client_port_logging = no
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
relay_destination_rate_delay = $default_destination_rate_delay
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_initial_destination_concurrency = $initial_destination_concurrency
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
send_cyrus_sasl_authzid = no
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
showq_service_name = showq
smtp_bind_address6 =
smtp_body_checks =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
smtp_destination_rate_delay = $default_destination_rate_delay
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_header_checks =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_initial_destination_concurrency = $initial_destination_concurrency
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mime_header_checks =
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_nested_header_checks =
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_cache_name =
smtp_sasl_auth_cache_time = 90d
smtp_sasl_auth_soft_bounce = yes
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_fingerprint_cert_match =
smtp_tls_fingerprint_digest = md5
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 9
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_port_logging = no
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = login,plain
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.cha in.pem
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 9
smtpd_tls_cert_file = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.cer t.pem
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_fingerprint_digest = md5
smtpd_tls_key_file = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.key .pem
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = no
stale_lock_time = 500s
stress =
strict_mailbox_ownership = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${data_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
use_getpwnam_ext = yes
use_od_delivery_path = no
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps =
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
virtual_destination_rate_delay = $default_destination_rate_delay
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_initial_destination_concurrency = $initial_destination_concurrency
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
macosxserver02:~ academic$
Could someone please help me figure out what is wrong?
Cheryl Tarbox
Macintosh Support Specialist
Binghamton University
[email protected]I found two things that were causing my troubles.
First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
A big thank you to Gordon for looking into this and helping me get this resolved.
Cheryl -
How may I automatically stop and start Mail services at a set time please
Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>local.postfix.stop</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/serveradmin</string>
<string>stop</string>
<string>mail</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>1</integer>
<key>Minute</key>
<integer>00</integer>
</dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>local.postfix.start</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/serveradmin</string>
<string>start</string>
<string>mail</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>4</integer>
<key>Minute</key>
<integer>00</integer>
</dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down? -
Error while executing the service request : : Login to Mail Service failed
I am getting the following error in Convergence while attempting to authenticate against the mail service. I am able to access the backend mail service directly from a mail client with the same account without any issue.
Looking at the log file info:
==> iwc.log <==
AUTH: WARN from com.sun.comms.client.protocol.delegate.agent.LoginContextAgent Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,744 - Subject not found in session, creating one
AUTH: INFO from com.sun.comms.client.security.auth.modules.impl.SunAuthCallBack Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,745 - User LoginID is [email protected]
AUTH: INFO from com.sun.comms.client.security.auth.modules.impl.SunAuthCallBack Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,745 - User domain is mydomain.com
AUTH: INFO from com.sun.comms.client.security.auth.modules.impl.SunLDAPLoginModule Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,746 - Loaded UG LDAP pool...
AUTH: INFO from com.sun.comms.client.security.auth.modules.impl.SunLDAPLoginModule Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,750 - SunLDAPLoginModule:User [email protected] Authenticated
AUTH: INFO from com.sun.comms.client.security.auth.CommsUserInitContext Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,752 - Loading user entry from LDAP
AUTH: INFO from com.sun.comms.client.security.auth.CommsUserInitContext Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,754 - User entry loaded successfully
PROTOCOL: INFO from com.sun.comms.client.entity.user.sun.CommsUser Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,757 - IM Service is not enabled for user: sunImUser object class is not present
AUTH: INFO from com.sun.comms.client.web.IwcCookieManager Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:21,758 - Preferred language for user is en
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.UserPrefsCommandDelegate Thread httpSSLWorkerThread-8080-2 at 2009-03-10 04:33:22,404 - get_allprefs.iwc : Service is not enabled : im
PROTOCOL: INFO from com.sun.comms.client.entity.user.sun.CommsUser Thread httpSSLWorkerThread-8080-2 at 2009-03-10 04:33:22,405 - SMIME Service is not enabled for server
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.UserPrefsCommandDelegate Thread httpSSLWorkerThread-8080-2 at 2009-03-10 04:33:22,406 - get_allprefs.iwc : Service is not enabled : smime
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.agent.ClientOptionsAgent Thread httpSSLWorkerThread-8080-2 at 2009-03-10 04:33:22,407 - client preferences not found for domain: mydomain.com
PROTOCOL: INFO from com.sun.comms.client.entity.user.sun.CommsUser Thread httpSSLWorkerThread-8080-2 at 2009-03-10 04:33:22,418 - Client customization service is disbaled for the deployment
ADDRESS_BOOK: INFO from com.sun.comms.client.ab.coresrv.DBHandler Thread httpSSLWorkerThread-8080-1 at 2009-03-10 04:33:23,131 - Got DBPluginMap
PROXY_MAIL: INFO from com.sun.comms.client.web.services.sun.MailServiceProxy Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:23,139 - Performing Sun Mail Authentication
==> ../../messaging/log/http <==
[10/Mar/2009:04:33:23 -0400] fe-msg httpd[17512]: Account Information: connect [10.10.10.229:40786]
[10/Mar/2009:04:33:23 -0400] fe-msg httpd[17512]: General Information: [10.10.10.229:40786] POST /login.msc HTTP/1.1
[10/Mar/2009:04:33:23 -0400] fe-msg httpd[17512]: Account Notice: badlogin: [10.10.10.229:40786] proxy admin [email protected] domain=us.mydomain.com: user not found
==> iwc.log <==
PROXY_MAIL: ERROR from com.sun.comms.client.web.services.sun.MailServiceProxy Thread httpSSLWorkerThread-8080-0 at 2009-03-10 04:33:25,160 - cookies not present from MS response
==> ../../messaging/log/http <==
[10/Mar/2009:04:33:25 -0400] fe-msg httpd[17512]: Account Notice: close [10.10.10.229:40786] [unauthenticated] 2009/3/10 4:33:23 0:00:02 248 0 0
It appears that the authentication mechanism is trying to authenticate against the domain "us.mydomain.com" rather than "mydomain.com". At one point I added "us.mydomain.com" as an alias to the domain "mydomain.com" but it has since been removed. I am unsure where Convergence is pulling this information from. Any advice would be appreciated.highamjd1 wrote:
[10/Mar/2009:04:33:23 -0400] fe-msg httpd[17512]: Account Information: connect [10.10.10.229:40786]
[10/Mar/2009:04:33:23 -0400] fe-msg httpd[17512]: General Information: [10.10.10.229:40786] POST /login.msc HTTP/1.1
[10/Mar/2009:04:33:23 -0400] fe-msg httpd[17512]: Account Notice: badlogin: [10.10.10.229:40786] proxy admin [email protected] domain=us.mydomain.com: user not found
It appears that the authentication mechanism is trying to authenticate against the domain "us.mydomain.com" rather than "mydomain.com". At one point I added "us.mydomain.com" as an alias to the domain "mydomain.com" but it has since been removed. I am unsure where Convergence is pulling this information from. Convergence determines the default domain from the URL that you used to connect e.g. if you used "http://myserver.us.mydomain.com/iwc" it sets the default domain to "us.mydomain.com"
http://wikis.sun.com/display/CommSuite/Sun+Convergence+Administrative+Tasks#SunConvergenceAdministrativeTasks-HowdoIcustomizetheLoginpagebasedonthedomainnameintheURLtoaccesstheConvergenceclient%3F
Rather then use the default domain for the proxy administrator, you can hard-code the domain e.g.
./iwcadmin -w <password> -o mail.proxyadminid -v [email protected]
./iwcadmin -w <password> -o cal.proxyadminid -v [email protected] need to restart the application-server domain hosting Convergence for the changes to become active.
Regards,
Shane. -
Error in the SMTP log of the mail service regarding "master.lock"
I am getting the following error in the SMTP log of the mail service, Anybody might have any suggestions:
postfix/master[87670]: fatal: open lock file /var/lib/postfix/master.lock: cannot open file: Permission denied.
The permissions of the master.lock file are as follows:
-rw------- 1 _postfix mail 33 Jul 7 10:25 master.lock
The Mail service stops after a few minutes from starting it
I appreciate your feedbackI found the problem.. the executable job was referring to a none existing batch file..
I have refreshed the database from production some time ago and the jobs I have setup are referring to production scripts and paths (which we didnt have on dev)..
This is now resolved.
Thanks -
Recently, after a year or more of relatively smooth service, my OS X Server 10.4.11 Mail services has been locking up daily.
I was finally able to get some information from the log files (I am a noob to this) and saw the following right after my most recent reboot of the server:
Oct 5 09:51:11 mm1 master[50]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/Data/mail/var/imap
I checked the server and that directory is indeed there on the partition named "DATA", so I am baffled as why the server does not thing the configuration directory exists?
drwxr-xr-x 15 cyrusima mail 510 Oct 5 09:51 imap
drwxr-xr-x 15 root admin 510 Oct 3 20:01 imap.BAK
drwxr-xr-x 15 cyrusima mail 510 Oct 3 20:05 imapold10032009-200707
drwxr-xr-x 4 jkoerber admin 136 Dec 3 2007 spool
mm1:/Volumes/Data/mail/var jkoerber$
Can anyone help me? My customers are yelling for blood because they cannot send/receive emails.
-- Jon
Message was edited by: Jon KoerberThanks Alex for the feedback. You are helpful as always!
It's good to know that the message I am getting from the mail server about the configuration files is only a temporary thing. Although I find it strange that the mail service doesn't know where its config files are since it is specified in the mail server setup.
I looked at the log files you mentioned and do not see anything that looks like a specific problem with the mail services themselves.
Recently, however, I have been having recurring problems where my mail server and my Web/Database server have both become unresponsive at nearly the same time even though they are on different class A networks to where I cannot access them via ARD, Server Admin and even SSH. That is usually when my mail server goes offline. I was afraid it was because of that configuration error I was seeing, but think now that the problem could be something else entirely (maybe some kind of network problem or denial of service hacking attack, no idea).
Thanks again.
-- Jon -
Questions about Mail Service and Campaign in Portal 8.1
1.How to disable batch mode email in portal 8.1 Mail Service using
Campaign?
2.For batch mode email, when will it deliver?
3.Where can I admin those parameter besides the fields mapping in
portal Admin->Campaign Server and Mail Service?The docs haven't been moved over to the 8.1 docsite, but the 7.0 docs
for campaigns are still pretty much valid in 8.1. Look at:
http://e-docs.bea.com/wlp/docs70/dev/cmpaign.htm#998197
for more information.
Basic answers:
1. You can't from a campaign. It will always batch emails in the database.
2. Use the bea/weblogic81/portal/bin/mainmanager.bat|sh script, which
uses the com.bea.p13n.mail.MailManager command-line java class (JavaDoc
at http://e-docs.bea.com/wlp/docs81/javadoc/index.html). This can be
invoked from cron or at for regular email delivery. Also, the emails are
deposited in the MAIL_* tables
(http://e-docs.bea.com/wlp/docs81/db/4Schemas.html#1064602), so you
could implement a delivery system from that as well.
3. There are no parameters since the email delivery is invoked from a
command-line process.
Greg
surfboy wrote:
1.How to disable batch mode email in portal 8.1 Mail Service using
Campaign?
2.For batch mode email, when will it deliver?
3.Where can I admin those parameter besides the fields mapping in
portal Admin->Campaign Server and Mail Service? -
Perl 5.12 Crash on Mail Service
Hi to all
since this morning i got Console full of messages telling that perl 5.12 crashed every 10 seconds
this is the issue:
Jun 18 17:38:51 mail postfix/smtpd[44496]: warning: problem talking to server private/policy: Undefined error: 0
Jun 18 17:38:53 mail postfix/spawn[44997]: warning: command /usr/bin/perl killed by signal 10
I post here also the output from my "postconf -n", i hope this helps
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /private/etc/postfix/submit.cred
inet_interfaces = all
inet_protocols = all
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, smtp.reteambiente.it, mail.reteambiente.it, reteambiente.it
mydomain = reteambiente.it
mydomain_fallback = localhost
myhostname = mail.reteambiente.it
mynetworks = 127.0.0.0/8,[::1]/128,192.168.0.0/24,92.62.161.120
newaliases_path = /usr/bin/newaliases
postscreen_dnsbl_sites = zen.spamhaus.org*2
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_canonical_maps = hash:/etc/postfix/system_user_maps
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,login,plain
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/mail.reteambiente.it.E9E736E5B8168C9B44FA41332CB109F82713E3AF .chain.pem
smtpd_tls_cert_file = /etc/certificates/mail.reteambiente.it.E9E736E5B8168C9B44FA41332CB109F82713E3AF .cert.pem
smtpd_tls_ciphers = medium
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/mail.reteambiente.it.E9E736E5B8168C9B44FA41332CB109F82713E3AF .key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
use_sacl_cache = yes
virtual_alias_maps = $virtual_maps
Any idea?
thank in advance!hi, i solved just deleting whitelist.db and greylist.db from/Library/Server/Mail/Data/mta
Anyway i disabled GreyListing features from Mail service because it's too buggy... -
SMTP vs. external mail service
I need to use SMTP on our webserver to send mail via a web form. However, we use an external 3rd party mail service and when the webserver passes the message for a @mydom.tld user to SMTP (Postfix), it gets passed on to dovecot and dumped in a local mailbox on the server (if the user name corresponds i.e. [email protected] => user account 'miles'). If the usernames don't match, _www gets the bounce message in its local mailbox. IMAP and POP are disabled.
DNS MX records point to the external service (with servers at priority 0, 10 and 20).
What I want to happen is for the SMTP server to send the message to the MX servers (the third party service) instead of trying to deliver it itself.
Here's what the SMTP logs say:
Feb 27 13:55:08 obelix postfix/pickup[52526]: E077C5FD068A: uid=70 from=<_www>
Feb 27 13:55:08 obelix postfix/cleanup[52547]: E077C5FD068A: message-id=<[email protected]>
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E077C5FD068A: from=<[email protected]>, size=581, nrcpt=1 (queue active)
Feb 27 13:55:08 obelix postfix/local[52549]: error: od[getpwnam_ext]: No record for user saskatoon
Feb 27 13:55:08 obelix postfix/pipe[52550]: E077C5FD068A: to=<[email protected]>, relay=dovecot, delay=0.04, delays=0.02/0.01/0/0.02, dsn=5.1.1, status=bounced (user unknown)
Feb 27 13:55:08 obelix postfix/cleanup[52547]: E87B85FD068C: message-id=<[email protected]>
Feb 27 13:55:08 obelix postfix/bounce[52552]: E077C5FD068A: sender non-delivery notification: E87B85FD068C
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E87B85FD068C: from=<>, size=2252, nrcpt=1 (queue active)
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E077C5FD068A: removed
Feb 27 13:55:08 obelix postfix/local[52549]: od[getpwnam_ext]: no attribute dsAttrTypeStandard:MailAttribute in record for user _www
Feb 27 13:55:08 obelix postfix/pipe[52550]: E87B85FD068C: to=<[email protected]>, relay=dovecot, delay=0.01, delays=0/0/0/0.01, dsn=2.0.0, status=sent (delivered via dovecot service)
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E87B85FD068C: removed
From postconf -n:
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 10485760
mydestination = $myhostname, localhost.$mydomain, localhost, mydom.tld, $mydomain
mydomain = obelix.mydom.tld
mydomain_fallback = localhost
myhostname = obelix.mydom.tld
mynetworks = 127.0.0.0/8,10.198.186.90
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/*.mydom.tld.XXXXXXXXX.chain.pem
smtpd_tls_cert_file = /etc/certificates/*.mydom.tld.XXXXXXXXX.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/*.mydom.tld.XXXXXXXXX.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
Any and all help appreciated.
Thanks,
MilesWell, the big question is whether or not this server should accept mail for your domain, mydom.tld.
If it should, then this is appropriate - it sees a message for a domain that it's responsible for.
If, on the other hand, this server isn't responsible for your domain's mail then tell it so.
Right now you've told it that it SHOULD accept mail for mydom.tld:
mydestination = $myhostname, localhost.$mydomain, localhost, mydom.tld, $mydomain
So any mail addressed to any user @mydom.tld is going to get delivered locally. If that's not what you want, remove mydom.tld from mydestination and the message will follow the normal SMTP/MX rules. -
Photoshop Elements 11 - Adobe E-Mail-Service funktioniert nicht
Hallo
Ich habe kein Outlook am laufen. Ich versende meine Mails mit GMail. Da dies nicht unterstützt wird von Photoshop Elements 11 habe ich mir nun gedacht dass ich es mit Adobe E-Mail-Service versuche.
In der Beschreibung steht: "Wenn sie den Adobe E-Mail Service wählen sendet Adobe Ihnen zunächst eine E-Mail zu, um zu testen ob ihre E-Mail Adresse E-Mails senden und empfangen kann.
Leider erhalte ich aber keine E-Mail von Adobe. Vielleicht liegt es auch daran, dass ich keine [email protected] E-Mail Adresse habe. Meine registrierte E-Mail Adresse bei Adobe lautet [email protected]
Hat jemand eine Idee wie dies funktioniert mit dem Adobe E-Mail Service?
Für Ratschläge bin ich dankbar. Danke!!Hi Hayzal,
Please refer the KB : http://helpx.adobe.com/elements-organizer/using/sending-photos-media-files-email.html -
PSE 7.0 Crashes w/Adobe E-Mail Service
PSE 7.0 crashes with the following response when I try to send an image using Photomail or as an attachment.
It appears to work fine (or at least gets to the point where I can edit the message) when using Outlook or Outlook Express. However, we use Thunderbird, so would prefer to use the Adobe E-Mail service. We upgraded from PSE 4, which worked on the Adobe E-Mail Service with no issues.
"Adobe Photoshop Elements 7.0 (Organizer) has encountered a problem and needs to close. We are sorry for the inconvenience."
It gets to the point where the email shows up on the right-hand sidebar, then the mouse goes to an hourglass for a few seconds and then the above error message.
I'm running XP Pro SP3.
Any ideas?
Thanks,
MarcA couple of other thoughts:
1. Perhaps PSE 7 doesn't like the PSE 4 address book. That happens occasionally, though I recall it caused other symptoms, not a crash. You could find all copies of the file "contacts.xml" and delete them, and see if that helps. Different versions of PSE can hide these in dfferent folders, so configure Windows Explorer to show hidden files and then search your entire C drive.
2. You could try the sledgehammer approach of uninstalling PSE 7, manually removing all traces left behind by the uninstaller, and then re-installing in what Adobe calls "simplified mode", with anti-virus and all other background services disabled:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#Try_Adobes_generic_troub leshooting
Maybe you are looking for
-
Cant open Mozilla in normal mode. Also get same error message when trying to click on embedded links in internet explorer and outlook express emails
-
Oracle 8.1.7/9iAS installation problem on IBM AIX 5.1 - loadext fails
Dear colleagues, tried to install Oracle 8.1.7 and then Oracle 9iAS over AIX 5.1 on IBM eServer p-series. The installation fails in the very beginning - loadext for post-wait Kernel Extension (/etc/pw-syscall) fails with 'exec format error'. Document
-
Please help me! Error setting property 'out' in bean of type null
I got this "nice" exception 2 days ago, but I realy can't find the problem. As you can see next all beans have setters/getters and are initializated. Please help me: index.jsp: f:view> <h:dataTable value="#{DataBaseReaderBean.todayArticles}" var="art
-
Acrobat Forms -- how do i make a text field opaque when typing
I'm new to the Forms formatting, so bear with me. I'm trying to create a fillable form which has rules to fill in by hand. How can I create a text field box that will cover the rules behind it if someone chooses to type the info instead of handwritin
-
TDM Importer in Excel 2003 does not appear in the COM Add-In Menu
I have a program that will create a TDMS file with the data, and after execution is complete, I would like to import the data into Excel and manipulate it using a macro. I can import the file manually and run the macro by opening a second file contai