Mail set up and other minor tweeks

I would like to know how to remove the ugly picture that iphoto took of me during initial set-up from sent emails. there doesn't seem to be anything in signatures that makes any difference to it.
Also how can you set columns as the default view in Finder?
Also how to remove the VPN icon from the menu bar (that popped up while messing with things I shouldn't have been and didn't need to and now look...)
Also have installed Boot Camp beta and MS XP but even though MAC is defined as the default start up Windows is the one that jumps in and takes over. How can you stop this?
Forgive me if these questions should be divided up by topic I'm new to this and don't know how these things work. Would appreciate any help you an give.
Thanks
15" Macbook Pro   Mac OS X (10.4.8)  

Hi Toiling,
I would like to know how to remove the ugly picture that iphoto took of me during initial set-up from sent emails. there doesn't seem to be anything in signatures that makes any difference to it.
Are you talking about the picture in the upper right corner of email messages you send? If so, this is the picture chosen in your computer's user account. You can change it here: System Preferences/Accounts. Select your user account and click on the Picture tab to change it. But I don't think this picture is sent with your emails.
Also how can you set columns as the default view in Finder?
Go in Finder/Preferences/General and check the box "Open new windows in column view".
Also how to remove the VPN icon from the menu bar (that popped up while messing with things I shouldn't have been and didn't need to and now look...)
Open Internet Connect (in Applications) and click on VPN and uncheck the box "Show VPN status in menu bar". You can also delete a configuration for VPN by selecting "Edit configurations..." in the Configuration dropdown menu and clicking the - sign after you selected the configuration you don't need.
Also have installed Boot Camp beta and MS XP but even though MAC is defined as the default start up Windows is the one that jumps in and takes over. How can you stop this?
Unfortunatly, I can't help you with this one... I don't know anything about BootCamp. I'm sure someone else will be able to answer this.
Guylaine
Mac mini Intel Core Duo 1.66 GHz 512MB DDR2 SDRAM   Mac OS X (10.4.8)   G4 Digital Audio Mac OS 9.2.2, iPod nano 1GB, iPod nano 4GB

Similar Messages

  • Mail set-up and other questions.

    Hello, everyone.
    I am new to this forum as I just purchased my new iphone and am now in the process of having it set-up. Some questions have come up and I would appreciate any help or suggestions any of you can offer me. Here are the questions I have:
    1. I have set-up G-Mail on the iphone using POP. First problem is the fact that it downloads only 25 messages and then stops. I have its preferences set for 100 messages. I also would like to use filters so that I can have g-mail download some messages but not others. How can I set-up filters for my g-mail account on the iphone ?
    2. After I started itunes I noticed that everytime I went back to the application it was playing a different track suggesting it was playing in the background when I was using another application. How can I exit itunes and turn it off so that it doesn't keep playing and using valuable battery power ?
    3. Last but not least I have noticed that my phone doesn't ring. I have set up the ringer to ring, have selected my ringtone and also adjusted the volume. I can hear the phone ringing if I have the headphones on but without them the phone itself doesn't ring (it does vibrate). How can I set-up the phone so that it rings when called ?
    Thank you in advance for your help.
    Best regards,
    JC

    1. You can't apply filters to email on the iPhone. The capability doesn't exist in 3.0.
    2. The iPod application stays running in the background on the iPhone so you can continue listening to music as you surf, etc. The way to stop it is to either close the iPod before going to something else or pause the playback before heading elsewhere.
    3. Try setting one of Apple's default ringtones to see if there's something amiss with your custom ringtone.
    Message was edited by: dmiannay

  • Can't debug procedures (and other minor quirks)

    I'm using 1.2.1.3213 that bundles JDK1.5.0_06, and running it under RHELWSr3 from /home/jdl/tmp/sqldeveloper/ .
    While editing a procedure, when I hit the debug icon & then hit OK in the Debug PL/SQL window, I don't get the "resume|step into|etc." toolbar in the Debugging-Log tab, nor the SmartData|Data|Watches set of tabs. It seems to do nothing, though this gets displayed back in
    the shell where I started it:
    Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError
    at oracle.jdevimpl.runner.debug.DebuggingListener.startListening(DebuggingListener.java:68)
    at oracle.jdevimpl.runner.debug.RaptorDebuggingHelper.startDatabaseListener(RaptorDebuggingHelper.java:327)
    at oracle.jdevimpl.runner.debug.RaptorDebuggingHelper.getDatabaseCommands(RaptorDebuggingHelper.java:139)
    at oracle.dbtools.raptor.runner.DBStarterFactory$PlSqlStarter.start(DBStarterFactory.java:267)
    at oracle.ide.runner.RunProcess.startTarget(RunProcess.java:823)
    at oracle.jdeveloper.runner.JRunProcess.startTarget(JRunProcess.java:470)
    at oracle.jdevimpl.runner.debug.DebuggingProcess.startTarget(DebuggingProcess.java:630)
    at oracle.ide.runner.RunProcess.start(RunProcess.java:771)
    at oracle.jdeveloper.runner.JRunProcess.super_start(JRunProcess.java:358)
    at oracle.jdeveloper.runner.JRunProcess.mav$super_start(JRunProcess.java:43)
    at oracle.jdeveloper.runner.JRunProcess$1$1.run(JRunProcess.java:383)
    at java.awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
    Other minor quirks:
    New connection: the button that should have a label of "Connect"
    instead has "..."; only when I manually widen the window do I see
    what the button label actually is.
    This one is quite difficult to reproduce, but it's happened at least
    4 times to me, so I thought I'd bring it up. I'm not in the habit
    of saving passwords, so when I try to open a connection and I get
    prompted for the Connection Information, occasionally the window
    will not accept any input other than a mouse-click on the buttons:
    it will not accept keyboard focus, so I can't enter a password.
    Hitting the Cancel and selecting the connection again seems to work.
    Maybe this is my old window mgr.
    There's lots of disconcerting noise on startup, which may reveal the source of the debugger problem listed above:
    Oracle SQL Developer
    Copyright (c) 2006, 2007, Oracle. All rights reserved.
    Using oracle.home=/home/jdl/tmp/sqldeveloper
    Using ide.user.dir=/home/jdl/.sqldeveloper
    oracle.classloader.util.AnnotatedNoClassDefFoundError:
    Missing class: com.sun.jdi.Bootstrap
    Dependent class: oracle.jdevimpl.debugger.jdi.DebugJDIConnector
    Loader: main:11.0
    Code-Source: /home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.javacore.jar
    Configuration: system property /home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.javacore.jar
    The missing class is not available from any code-source or loader in the system.
    at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2100) [home/jdl/tmp/sqldeveloper/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1698) [home/jdl/tmp/sqldeveloper/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.classloader.PolicyClassLoader.access$000 (PolicyClassLoader.java:141) [home/jdl/tmp/sqldeveloper/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.classloader.PolicyClassLoader$LoadClassAction.run (PolicyClassLoader.java:297) [home/jdl/tmp/sqldeveloper/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
    at java.security.AccessController.doPrivileged (Native method) [unknown, by unknown]
    at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1657) [home/jdl/tmp/sqldeveloper/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1639) [home/jdl/tmp/sqldeveloper/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
    at java.lang.ClassLoader.loadClassInternal (Unknown source file) [jre bootstrap, by jre.bootstrap:1.5.0_11]
    at oracle.jdevimpl.debugger.jdi.DebugJDIConnector.getVersion (DebugJDIConnector.java:30) [home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.javacore.jar (from system property /home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.javacore.jar), by main:11.0]
    at oracle.jdevimpl.debugger.support.DebugFactory.<clinit> (DebugFactory.java:83) [home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.javacore.jar (from system property /home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.javacore.jar), by main:11.0]
    at oracle.jdevimpl.cm.dt.DatabaseAddin._initialisePLSQLDebugger (DatabaseAddin.java:232) [home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.onlinedb.jar (from system property /home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.onlinedb.jar), by main:11.0]
    at oracle.jdevimpl.cm.dt.DatabaseAddin.initialize (DatabaseAddin.java:218) [home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.onlinedb.jar (from system property /home/jdl/tmp/sqldeveloper/jdev/extensions/oracle.onlinedb.jar), by main:11.0]
    at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin (AddinManagerImpl.java:433) [home/jdl/tmp/sqldeveloper/ide/lib/ideimpl.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins (AddinManagerImpl.java:244) [home/jdl/tmp/sqldeveloper/ide/lib/ideimpl.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins (AddinManagerImpl.java:157) [home/jdl/tmp/sqldeveloper/ide/lib/ideimpl.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ide.IdeCore.initProductAndUserAddins (IdeCore.java:1517) [home/jdl/tmp/sqldeveloper/ide/extensions/oracle.ide.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ide.IdeCore.startupImpl (IdeCore.java:1280) [home/jdl/tmp/sqldeveloper/ide/extensions/oracle.ide.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ide.Ide.startup (Ide.java:642) [home/jdl/tmp/sqldeveloper/ide/extensions/oracle.ide.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ideimpl.DefaultIdeStarter.startIde (DefaultIdeStarter.java:35) [home/jdl/tmp/sqldeveloper/ide/lib/ideimpl.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ideimpl.Main.start (Main.java:90) [home/jdl/tmp/sqldeveloper/ide/lib/ideimpl.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at oracle.ideimpl.Main.main (Main.java:51) [home/jdl/tmp/sqldeveloper/ide/lib/ideimpl.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by main:11.0]
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native method) [unknown, by unknown]
    at sun.reflect.NativeMethodAccessorImpl.invoke (Unknown source file) [unknown, by unknown]
    at sun.reflect.DelegatingMethodAccessorImpl.invoke (Unknown source file) [unknown, by unknown]
    at java.lang.reflect.Method.invoke (Unknown source file) [unknown, by unknown]
    at oracle.ide.boot.PCLMain.callMain (PCLMain.java:45) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.PCLMain.main (PCLMain.java:37) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native method) [unknown, by unknown]
    at sun.reflect.NativeMethodAccessorImpl.invoke (Unknown source file) [unknown, by unknown]
    at sun.reflect.DelegatingMethodAccessorImpl.invoke (Unknown source file) [unknown, by unknown]
    at java.lang.reflect.Method.invoke (Unknown source file) [unknown, by unknown]
    at oracle.classloader.util.MainClass.invoke (MainClass.java:89) [home/jdl/tmp/sqldeveloper/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain (IdeLauncher.java:218) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.IdeLauncher.launchImpl (IdeLauncher.java:90) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.IdeLauncher.launch (IdeLauncher.java:66) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.IdeLauncher.main (IdeLauncher.java:55) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native method) [unknown, by unknown]
    at sun.reflect.NativeMethodAccessorImpl.invoke (Unknown source file) [unknown, by unknown]
    at sun.reflect.DelegatingMethodAccessorImpl.invoke (Unknown source file) [unknown, by unknown]
    at java.lang.reflect.Method.invoke (Unknown source file) [unknown, by unknown]
    at oracle.ide.boot.Launcher.invokeMain (Launcher.java:508) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.Launcher.launchImpl (Launcher.java:106) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.Launcher.launch (Launcher.java:60) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    at oracle.ide.boot.Launcher.main (Launcher.java:49) [home/jdl/tmp/sqldeveloper/ide/lib/ide-boot.jar (from manifest of /home/jdl/tmp/sqldeveloper/ide/lib/ide.jar), by sun.misc.Launcher$AppClassLoader@20120943]
    Addin: Translator PlSql is trying to register a input type (.plsql) which conflicts with translator PlSql who already using this input type

    figured out the main problem (and resolved the startup noise) - I had the windoze distribution that contains "java.exe", so that java wasn't found, and the java that was being found was a jre & not a jdk.

  • Setting UI60_ICON and other environment variables

    Hi, I am developing using forms 6i. I tried setting the UI60_ICON environment variable from
    1. The Control Panel -> System -> Advanced -> Environment Variable -> System Variables and
    2. The Registry Editor -> Edit ->New -> String Value
    But my icons will still not appear in my forms. Can some one help me.
    I do not add the .ico extension when I use the icon name. And I also make sure the icon has been place in the path I have stated. The icon appears when I place them in the FORMS60 environment variable.
    I need help.

    Try to set with Registry Editor
    HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE (where you see FORM_PATH and other)
    variable
    UI_ICON instead UI60_icon
    Hope helps

  • Can't Sync IMAP Sent Mail on E72 and other issues!

    Has anybody any idea why Nokia felt it a good idea to release a phone with a mail client, that supports IMAP, but DOESN'T sync your sent mail? It is such a ridiculous omition that I am lost for words. I actually recommended the E71 to our IT department a few years ago but the mail client was so poor, we ended up getting 15 phones and 15 Profimail licences. The IT department have asked me to recommend the next phone as the E71 was a big hit and I asked them to get me this E72 to test. It is with great reluctance that I am going to try the iphone instead and recommend that as I believe the mail client on it is very good and the E72's is totally hopeless unless you go through the Nokia Messaging server, which obviously a corporate isn't going too. Before I knee jerk though, has anyone else had this issue and found a way around it?
    Also, the predictive text is shocking now, the web browser is so buggy and closes without warning due to memory issues all the time.
    Oh, the optical control pad is dreadful and totally useless and the select key also doesn't work in off-line mode, so the E72 is useless on a plane.
    Nice to see that Nokia took the very good E71, played with it, broke it, made it far worse and buggy, stuck a new case on then released it as the E72. I remember the days that a Nokia phone worked from the minute you bought it, but now with firmware updates Nokia feel they can release half baked phones by the dozen, monthly. Pathetic.
    Oh, and this is the latest firmware, too!
    And one other thing, OVI Suite, PC Suite and the umpteen other applications that all do useful things....can Nokia not just release one main PC support app that works and has ALL the features under one roof? I have to installed them all on my PC as well as loads of other sync and office apps on the phone (like OVI Files) just to do the obvious things that you use a modern smartphone for.
    Nokia, there is a very obvious reason why you are losing market share at the moment, and it isn't because people trust Google or like DRM and fruit pictures on their phones. Get a grip will you?
    If anyone can help primarily with the Sent Mail sync issue in Nokia Email (without suggesting I route all my mail through Nokia's unreliable servers and divulge all my passwords), I would be very Grateful Indeed.

    I had a number of problems setting up Google Apps with my phone. Mail, Calendar and Tasks were not syncing.
    Mail
    Ok here is the solution to your sent mails problem. I have spent far too long setting up google apps to sync properly with my new E72 (latest software installed). It really is a superb phone but if Nokia is not going to fully support integration with Google Apps with a simple app then Android and Blackberry will simply take over for Apps users. It really isn't up to Google to solve this its up to Nokia. Are you going to move from Google Apps or change your phone????
    I have gmail and  business google apps accounts and both are now syncing properly with what seems to be pretty good Nokia email software on the phone. This is allowing me to receive, send, view attachments, view sent mail etc. Here are the steps I took from the beginning.
    1. Enable IMAP for the google accounts. Couldn't get anything to work otherwise.
    2. Follow this instruction https://mail.google.com/support/bin/answer.py?answer=78887 
    3. Your inbox should now be working however you now need to map the folders you want to see on your mobile. While at your inbox go to >settings>mailbox settings>what to sync>folder subscriptions.
    4. Click on Gmail and highlight the folders you want to see
    5. Go back to your inbox and go to the dragdown list of folders and highlight 'More Folders'. Under 'Gmail' you will find your sent items along with attachments etc. Problem solved. Its not a pretty solution but at this stage like me you just want something that works.
    Calendar
    This was a nightmare and I am now running a third party app called Googasync which is working fine. In 10 days time I will need to buy this so if someone knows how to setup calendar syncing properly without it please let me know.
    Tasks
    Googasync will not sync Tasks and I don't know if there is any app out there that will. If someone can help please let me know. Surely this should be pretty simple!?!?!
    By the way I mailed Nokia support last Thursday on the above but have not received a reply.
    In summary its a great phone and I've moved from a Blackerry Bold to it but I shouldn't be spending days finding workarounds!!

  • Double mails in MobileMe and other account (IMAP)

    I am trying to optimize my mail workflow and I could use some help.
    What is the situation? In the Mail app I have two IMAP accounts set up: MobileMe and a business account.
    I have a mailaccount from my Internet-provider (Online.nl). All mail to that account is forwarded to my MobileMe account (IMAP). This works fine, except that MobileMe shows all mails double.
    I also have a business account that is also IMAP. All incoming mails on this account are also shown double.
    So the question, simply put, is: why do both my IMAP accounts show all incoming mails double ???
    Any help is appreciated. Thanks in advance.
    Willem
    Netherlands

    Hi
    Had the same problem, stumbled around, then finally found the solution.
    Switch off POP on your email. Delete the POP email account on your iphone. Try to set up a new email account on your iPhone. You then get a warning that POP is disabled but it then gives you full configuration options for the new email account - including IMAP! Switch to IMAP, complete the other settings and it all works.
    ps. To switch off POP on virgin email you need to log in using your web browser, then go to Settings, then Forwarding And POP/IMAP.

  • Not receiving mail to .mac and other mail issue's

    HI all
    OK first up I cannot recieve any mail to my @mac.com address, when ever I try to send a test email to myself I recieve a bounced email back saying that 'Delivery to the following recipient failed permanently' I have read discussions on this matter and understand that I should be able to recieve email to this address as it is still in use for .mac users despite the iCloud change over but haven't been able to resolve this problem so far.
    I also have a @me.com address which appears to recieve mail ok but would like to continue recieving mail to my @mac.com.
    Secondly, I am only able to recieve mail to my @me.com address as when I try to send from this account I recieve a 'Cannot send message using the server iCloud' yet I am able to send mail from a different @me.com address that I created when iCloud was set out.
    Both the @mac.com and @me.com addresses are original addresses from when thos services were first brought about but both have problems since the iCloud change over, @me.com addresses that I have created since the iCloud change over appear to work fine.
    I let Lion set up all of my iCloud stuff through system preferences when it was rolled out and therefore has set up the mail preferences which are as follows :
    In the address field I have both my @mac.com and @me.com seperated by a comma ([email protected], [email protected])
    Incoming mail server is p02-imap-mail.me.com which I greyed out !?!
    Under advanced is Port: 993, Use SSL: Checked, Authentication: Apple Token
    Outgoing mail server: iCloud, however when I clicked on the edit SMTP server list iCloud SMTP is not in the list
    Thankyou !

    Immediately contact Apple. Call a Genius and at least leave Apple some feedback. This should not be happening. It was indeed promised by Apple that all @mac.com addresses and aliases would remain functional if you had any of them before the switch to iCloud. They are still working for me, luckily.
    Also, try changing the incoming and outgoing mail servers. Up until last week I was happily using POP with iCloud until – bam! – Apple decided to only support IMAP from then on. This change left me no option but to change to IMAP. My incoming server address is slightly different from yours. Maybe changing it to the new (?) address will solve your problem. At least it's worth a try, I'd say.
    In my Mail.app Accounts preference pane, the IMAP server address is p99-imap.mail.me.com. I remember when setting up IMAP that the summary listed this same address as the incoming server. It doesn't show up in my SMTP server list either. So that should be normal behaviour, I guess.
    Good luck!

  • I can not connect to my work e-mail using both regular e-mail set-up and mail 2003 (work has Outlook 2003).  I get the error message "no internet connection- as soon as a connection is made it will switch back".  Does anyone have any suggestions?

    Why can't I connect to my work e-mail (Outlook 2003) using either the regular e-mail account set-up or Mail 2003? Does anyone have any suggestions?

    I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
    Try the Zimbra support forums. I found this excerpt from a relevant post:
    http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
    in which the following ports were suggested
    ports 25, 465, and/or 487 to send mail.
    port 143/993 to retrieve mail over IMAP

  • Midpan is not mid pan after output and other minor problems...

    Ok, so I have this procjet I am working on.
    I have one sync with a man and one background audiotrack with a choir.
    In my headphones I hear a perfect midpan.
    The audiobar/VUmeters in FXPX shows exactly the same levels as eachother, since I have been using dual mono.
    When I export to a movie directly from FCPX I get about 75% left and 25% panning of audio in the exported file.
    After a couple of exports it magically starts working....
    However even If it is me that has done something wrong. I do not like the "what you hear is not what you get" feature...
    Anyone had this problem?
    Ohh and another thing that is realy annoying is that when I try to resize a window in the UI by dragging the middle bar I only grabs the window 1/3 of the times. I have to clich 2 to 3 times and reapeat, and then it works. Same goes with renaming clips that just refuses from time to time.
    Is this normal?

    OK. I found it. The project was set to surround by default. Setting it to stereo took care of pan problem.

  • Transfer speed and other minor bits

    First off - I love my iPod (40g Colour) and despite my regular bouts of impatience when updated, loading etc I am very happy with the thing. I even bought my wife a shuffle and she likes that for when she's at the gym. I found the software/hardware to be very forgiving.
    However I thought I'd post a query to see if anybody had any ideas on my minor problems.
    1) When we loaded my wife's shuffle for he first time we had problems with the USB 2 convection. PC keeps saying "this item can run faster connect to a USB2 ....." but it is connected to a USB 2 socket. Now everytime I attach either iPod the same warning comes on (except if I connect before starting!). I know its a USB 2 because a new board was fitted a while ago and my 40g will synch and charge on the connection.
    2) Slow transfer. I recently loaded iTunes 5.0 which didn't work for me (see 3). So I wiped it and loaded a copy of 4.9 (thanks to filehippo). Im up and running again but had to re-synch my iPod to iTunes. The tranfer rate is about 500 tracks per hour so to do the 8500 that my iPod takes needs 17 hours. When its done I should'nt need to do it agin for a while but could I speed things up a bit?
    3)Should I go to iTunes 5.0.1? 5.0 loaded on my PC fine without all teh problems that have filled these oages recently but when in 5.0 I connected either iPod (shuffle or 40G I got an error somthing like "Ipod not recognised re-intall iTunes". I know some other people had a similar problem. iTunes 4.9 is working fine but is it safe for me to try 5.0.1 yet?
    Sorry to go on a bit but I know from watching these forums recently there are some very knowledgeable and helpful people out there so I hope you don't mind my request.

    I've had some news - most of it good. I got fed up with the transfer speed so I took my box into my local store to get it checked out. No visible fault on my USB 2.0! I know it happens but they couldn't replicate it so I went home. Plugged all my stuff in except USB devices. Plugged in my iPod and it worked. I was now thinking about power requirements etc. Plugged in my USB modem and the iPod still updated at USB 2.0 speed. Next I tried my wife's shuffle - so far so good. I then plugged everything in and the iPod defaulted back to USB 1.1!
    Tried the shuffle in the spare USB2.0 socket and it worked. Plugged my iPod in and that worked - Now I knew what the problem was - I only have 3 USB 2.0 sockets (5 USB1.1)and two had faulted.
    Next step will be a new card with a fire wire socket! Happy Days - although I still cant get an extension cord to work with my iPod.
    While I was on a roll I took the bull by the horns and loaded iTunes 6.0. Works like a dream although it is a bit slower than 4.9 - probably considerably bigger but it works!!
    My turn to be the lucky one this week!!! Maybe your turn next.

  • How to set background and other elements for each page of gallery?

    I guys, I used th DW/FW Web Photo Gallery tool to make this gallery: http://12bar.co.nz/Gallery/index.htm then edited index.htm to make the page look a bit more attractive. However, when you click on any of the images you just get the ugly white background and black text.
    Is there a way to make each photo page black background and insert navigational graphics without having to open and edit each one individually?
    Thanks in advance for advice.
    Jo

    Why not try using something like Lightbox.  When you click on the thumbnail... this uses jquery, but it's very simple to set up:
    http://www.lokeshdhakar.com/projects/lightbox2/
    and there is this one:  Pretty Photo with a few more options:
    http://www.no-margin-for-errors.com/projects/prettyPhoto-jquery-lightbox-clone/
    and lots more options for photo galleries, slideshows here:
    http://www.1stwebdesigner.com/resources/57-free-image-gallery-slideshow-and-ligh tbox-solutions/
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    http://csstemplates.com.au/
    http://twitter.com/nadiap

  • [8i] ORA-12704: character set mismatch (and other issues)

    I've been trying to put together sample data on this problem since Friday, but I'm having issues. I'm thinking the problem is something specific to the old database I'm trying to work in:
    BANNER
    Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
    PL/SQL Release 8.1.7.2.0 - Production
    CORE    8.1.7.0.0       Production
    TNS for HPUX: Version 8.1.7.2.0 - Production
    NLSRTL Version 3.4.1.0.0 - ProductionI tried copying over all the data into my test database:
    BANNER
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - ProductionAnd, I can't duplicate the problem there. In fact, I ran my original query in my test database, using the db llink, the query ran just fine.
    But, I tried to create some sample data anyway to try to get some help here, so, I created 3 tables in my test database as SELECT from the old database (via a db link).
    One table was really the results of a query (with many sub-queries) that was working just fine in the old database. It was the 2nd highest level query that wasn't giving me any problems. (Below, in my query, subquery 'a' runs just fine in the test database also; it's only the top level query that gives me an error.)
    The other two tables I created were just simple sub-sets of the original tables in the old database.
    I ran my query in my test database against those tables, and again, it ran just fine. No character set mismatch error.
    So, based on the tables from the old database, I created the following test tables:
    TEST TABLE DEFINITIONS
    CREATE TABLE     test_inv_1
    (     cust_id          CHAR(10)
    ,     item_id          VARCHAR2(32) -- becomes 96 if I create as select
    ,     match_item_id     CHAR(10)
    ,     docdate          DATE
    ,     tot_amt          NUMBER(5)
    INSERT INTO     test_inv_1
    VALUES('C1000','I0001','I0001',TO_DATE('01/01/2011','mm/dd/yyyy'),1000);
    INSERT INTO     test_inv_1
    VALUES('C1000','I0002','I0002',TO_DATE('01/05/2011','mm/dd/yyyy'),1050);
    INSERT INTO     test_inv_1
    VALUES('C1000','MANUAL ADJUSTMENT','MANUAL ADJ',TO_DATE('01/01/2011','mm/dd/yyyy'),1000);
    INSERT INTO     test_inv_1
    VALUES('C1001','I0003','I0003',TO_DATE('01/01/2011','mm/dd/yyyy'),500);
    INSERT INTO     test_inv_1
    VALUES('C1001','OTHER ADJUSTMENT','OTHER ADJU',TO_DATE('01/01/2011','mm/dd/yyyy'),50);
    INSERT INTO     test_inv_1
    VALUES('C1001','M123','M123',TO_DATE('01/10/2011','mm/dd/yyyy'),150);
    CREATE TABLE     test_btab_1
    (     billing_id          CHAR(10)     NOT NULL -- becomes 30
    ,     payment_terms_cd     CHAR(3)                -- becomes 9
    INSERT INTO     test_btab_1
    VALUES ('I0001', '01');
    INSERT INTO     test_btab_1
    VALUES ('I0002', '01');
    INSERT INTO     test_btab_1
    VALUES ('I0003', '02');
    INSERT INTO     test_btab_1
    VALUES ('M123', 'COD');
    INSERT INTO     test_btab_1
    VALUES ('I0004', '01');
    CREATE TABLE     test_tabm_1
    (     record_type     CHAR(4)          NOT NULL     -- becomes 12
    ,     record_key     CHAR(10)     NOT NULL     -- becomes 30
    ,     numeric_1     NUMBER(15,5)
    ,     numeric_5     NUMBER(7)
    ,     numeric_6     NUMBER(7)
    INSERT INTO     test_tabm_1
    VALUES ('LOCA','A1234',NULL,NULL,NULL);
    INSERT INTO     test_tabm_1
    VALUES ('TERM','01',2,10,30);
    INSERT INTO     test_tabm_1
    VALUES ('TERM','02',0,0,45);
    INSERT INTO     test_tabm_1
    VALUES ('TERM','COD',0,0,30);Again, the first table, test_inv_1, is an example of the results of a query that was working just fine in the old database. (There are comments in the table definitions above--I'll explain those in a bit.)
    Here is the query I ran against this data:
    QUERY
    SELECT     a.*
    ,     1 - (t.numeric_1/100)          AS amt_pst_disc
    ,     a.docdate + t.numeric_5 - 1     AS disc_end_date
    ,     a.docdate + t.numeric_6 - 1     AS duedate
    FROM     (
         SELECT     ic.*
         ,     CASE
                   WHEN     b.payment_terms_cd     IS NULL
                   THEN     CAST('03' AS CHAR(10))
                   ELSE     CAST(b.payment_terms_cd AS CHAR(10))
              END                         AS pay_term
         ,     CASE
                   WHEN     b.payment_terms_cd     IS NULL
                   THEN     'Default Payment Terms'
              END                         AS pt_flag
         FROM     test_inv_1 ic
         ,     test_btab_1 b
         WHERE     ic.match_item_id     = b.billing_id (+)
         ) a
    ,     test_tabm_1 t
    WHERE     a.pay_term     = t.record_key
    AND     t.record_type     = 'TERM'
    ;In the old database, I get the error:
    WHERE   a.pay_term      = t.record_key
    ERROR at line 107:   --this is actually line 22 in the above query, since test_inv_1 represents the results of a sub-query
    ORA-12704: character set mismatchIn my test database, in every form, including with the sample data above, I don't have any problems.
    I unfortunately don't have a v8 test environment, and I suspect there aren't many people who actually do, anymore, so using my v10 test database is the best I can do to come up with test data...
    The other odd thing I noticed is that when I DESC the tables I created in my test database via SELECT statements, and compare them with the tables I created from CREATE statements (based on the table descriptions I got from the old database), some of the data lengths don't match up. That's what's in the comments in my table definitions. I noted where the tables I created via SELECT statements had different data lengths. I'm not sure if it's important or not, but in case it is, I thought I'd include it.
    Also, I'm creating this query to make a report for someone else, and the reporting system only has access to the v8 database, not my test database. So, I'm stuck making the query run against it.
    Any help on this would be greatly appreciated!

    I think it has something to do with my CASE statement. I found a kind of work-around solution. Instead of getting payment_term_cd associated with the item_id, the person I'm creating the report for wants the payment terms associated with the cust_id. Now, btab has the one associated with item_id, and not every item_id is in the btab table, so in my query, I was assuming a default value of '03' when it didn't find a payment_term_cd (i.e. it was NULL) for an item_id, which is what my first CASE statement is doing.
    However, every cust_id definitely has a payment_term_cd associated with it (in another table I did not provide sample data for, since I didn't know I'd need to use it). Here's the general idea of that table:
    CREATE TABLE     test_cust_1
    (     cust_id               CHAR(10)     NOT NULL
    ,     payment_terms_cd     CHAR(3)     --while it's not specified as NOT NULL, there are no NULLs for this column.  I think anything that would be NULL, the system initializes as '***'
    INSERT INTO     test_cust_1
    VALUES ('C1000','01');
    INSERT INTO     test_cust_1
    VALUES ('C1001','03');
    INSERT INTO     test_cust_1
    VALUES ('C1002','COD');So, there's no need for me to do a case statement. I can get away with something like:
    SELECT     ip.item_id
    ,     ip.docdate
    ,     ip.cust_id
    ,     ip.tot_amt
    ,     ip.pay_terms
    ,     t.record_key
    FROM     (
         SELECT     i.item_id
         ,     i.docdate
         ,     i.cust_id
         ,     i.tot_amt
         ,     CAST(c.payment_terms_cd AS CHAR(10))     AS pay_terms
         FROM     test_inv_1 i
         ,     test_cust_1 c
         WHERE     c.cust_id     = i.cust_id
         AND     i.tot_amt     <> 0
         ) ip
    ,     test_tabm_1 t
    WHERE     t.record_key     = ip.pay_terms
    AND     t.record_type     = 'TERM'-- edited out the incorrect results
    Anyway, when I used this new table with my original query in the 8i database, I didn't get a character set error, so that's why I think it has to do with the case statement.
    Edited by: user11033437 on Aug 22, 2011 1:43 PM -- fixed an error in my results

  • Can't set preferences, and other greyed menu choices

    Cannot set preferences for iDVD 06, and most menu choices are greyed.
    [Note: this is NOT the case with all other iLife 06 applications where all menu selections are active.]
    Looking through this forum I tried deleting the files in the library, as seems to be a frequent solution to everythng. This did NOT work in my case.
    This is the only program in iLife06 which has this problem. All the others have active menu selection. I can't even get "About iDVD" to work!
    Thanks for your help. Very frustrated.

    I would start by forcing AppleWorks to create new preference files.
    Quit AppleWorks and go to the Finder.
    In a finder window, go:
    yourname > Library > Preferences
    Locate and select the folder AppleWorks and the file com.apple.appleworks.plist
    Drag both to the Desktop or to the Trash (but don't empty the Trash).
    Relaunch AppleWorks to check for any change.
    Regards,
    Barry
    NOTE: This will return all preferences to their default settings. AppleWorks will construct new copies of the plist, the folder, and the files in the folder as it needs them. If you have made changes to the Button Bar, and have had no issues related to the Button Bar, you can restore those changes (probably without issues arising) by dragging the Button Bar file from the folder you moved into the new one in Preferences when it is created.
    B
    Edit:
    While your issue does not appear to be caused by the Recent Items bug referenced in Michael's post (after "Also perhaps..", there's no danger in clearing your Recent Items folder as discussed in the linked User Tip. This is a 'regular maintenance' procedure for me.
    B
    Message was edited by: Barry

  • Scrollbars, artboards, resizing and other minor tweaks offer

    I hope Adobe reads these forums, so here i post some bugs to fix, minor tweaks and my personal wishes for Illustrator. I guess many of them are not so hard to fix, but will make Illustrator much better.
    BUGS:
    - fix alt-scroll bug in pixel preview (viewport jumps to unpredicted locations)
    - layers panel becomes black when dragging a layer and scrolling at the same time (and the panel has enough layers to scroll)
    MINOR TWEAKS:
    - recolor artwork on the fly when dragging sliders in the color panel (not after releasing mouse button)
    - option to hide edges of inactive artboards only
    - resize crop areas to both sides (like drawing objects) when pressing alt
    - NORMAL scrollbars
    - in Appearance panel when clicking an eye and dragging mouse down/up toggle visibility of lower/upper items, but not dragging the item (make behavior same as in layers panel)
    - chahge value of numeric fields on hover and drag (not on click and drag, like in Photoshop)
    - when resizing, snap objects to their original size and position even when snapping is turned off
    - not squeeze/streth text when resizing area type
    - make hexadecimal field in color picker dialog 3 pixels wider so that all 6 characters fit in it
    - make status bar remember my choise of what to show
    - undo/redo functionality inside live color dialogue (!!!)
    - in view menu the word "show" shouldn't change for "hide", but a tick should appear/disappear
    - apply gradient by clicking with the gradient tool on an object
    - fonts preview in the drop-down menu in control panel
    - make stop button actually stop the progress when an effect is applying
    WISHES:
    - Photoshop's actions panel
    - right-click menu is really useful why not use it and put more often used commands in there like flip horisontal/ vertical when an arrow tool is active
    - fireworks' pathfinder
    - gradient stroke
    - labeling of crop areas (and possibly everything a slice has)
    - zoom and pan art when a dialogue window is open (like in Photoshop)
    Also SVG support back to Bridge.
    PS. And make this site usable in Opera. I could type text in this textarea only after disabling all styles for the page.

    I hope Adobe reads these forums, so here i post some bugs to fix, minor tweaks and my personal wishes for Illustrator. I guess many of them are not so hard to fix, but will make Illustrator much better.
    BUGS:
    - fix alt-scroll bug in pixel preview (viewport jumps to unpredicted locations)
    - layers panel becomes black when dragging a layer and scrolling at the same time (and the panel has enough layers to scroll)
    MINOR TWEAKS:
    - recolor artwork on the fly when dragging sliders in the color panel (not after releasing mouse button)
    - option to hide edges of inactive artboards only
    - resize crop areas to both sides (like drawing objects) when pressing alt
    - NORMAL scrollbars
    - in Appearance panel when clicking an eye and dragging mouse down/up toggle visibility of lower/upper items, but not dragging the item (make behavior same as in layers panel)
    - chahge value of numeric fields on hover and drag (not on click and drag, like in Photoshop)
    - when resizing, snap objects to their original size and position even when snapping is turned off
    - not squeeze/streth text when resizing area type
    - make hexadecimal field in color picker dialog 3 pixels wider so that all 6 characters fit in it
    - make status bar remember my choise of what to show
    - undo/redo functionality inside live color dialogue (!!!)
    - in view menu the word "show" shouldn't change for "hide", but a tick should appear/disappear
    - apply gradient by clicking with the gradient tool on an object
    - fonts preview in the drop-down menu in control panel
    - make stop button actually stop the progress when an effect is applying
    WISHES:
    - Photoshop's actions panel
    - right-click menu is really useful why not use it and put more often used commands in there like flip horisontal/ vertical when an arrow tool is active
    - fireworks' pathfinder
    - gradient stroke
    - labeling of crop areas (and possibly everything a slice has)
    - zoom and pan art when a dialogue window is open (like in Photoshop)
    Also SVG support back to Bridge.
    PS. And make this site usable in Opera. I could type text in this textarea only after disabling all styles for the page.

  • After Mavericks, applications tend to become slow, painfully slow. Particularly iMovie; all other applications, Mail, Browser (Chrome) and others too are either running slow or 'not responding'. Help, please

    After upgrading to Mavericks, from Mountai Lion, all applications are slowing down. iMovie particularly is painfully slow. When iM is running, any other application that is opened up also runs slow or does not respond altogether. It was fine before Mavericks, can somebody help, please.
    Thank you.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • WHERE ARE MY TABS???? - XPCOM error!!!

    PLEASE HELP!!!!! FIREFOX has deleted ALL my TABS. That is A LONG YEAR OF RESEARCH LOST for trusting this bunch of amateurs who have no clue as to how to run a company and offer NO customer service whatsoever!!! I tried renaming the sessionstore.bak t

  • Nokia X6 - In-car holder advice ...

    Hi chaps, I had a go at sat nav over the weekend and was really impressed with it. I am going to get the nokia X6 car holder (CR-120) as it looks the part. However, I just have 2 questions :- a) I have a silicon cover over my X6 making it about 53mm

  • SAP Query-SQ01,SQ02,SQ03

    Hi, One query was created in Development client and a transaction code was created for the same and transported to QA & production. But I am unable to see the same in QA cliet or production client. this was done by SAP implementation team and i do no

  • Applet causes high CPU usage

    Hallo, I have a strange problem with my applet. It displays medical images. After loading Image the CPU usage of java jiumps to 100% on single core processors and to 50% on 2 core processors, and stays high, without any interaction of user. I've used

  • Easiest way to backup music/photos/documents?

    What is the easiest and most cost efficient way to backup all my music/photos/ and documents? I've probably got about 5-10GB. Thanks.