Mail showing 2 emails for every 1

recently joined the cloud .. under my inbox shows my .mac account and my icloud .. emails sent to my .mac address (my primary) understandably appear in both .. my problem is that in my dock my little red circle that alerts me that I have an email will indicate I have 2 emails when I have one, or 8 when I have 4 and so on .. I'm not losing anything, but it's annoying

I still haven't figured this one out.

Similar Messages

IPhone 5c. my mail shows 223 emails but I don't have any.

Hello,
I have a new Iphone 5C . My mail shows 223 emails however I only have 5. I reloaded the mail portion however it has not changed anything. How do I correct the problem.

Found the answer and it worked,
go into your mail box for a specific email address,
click "edit"
hit "mark all" in the bottom left
and a menu pops up. hit "Mark as read"
you may need to do this a few times

Mail to be send for every new pur group

Hi ,
I have to send mail to recipients of the purchase grp ekgrp..
right now im able to send mail to all purchase orders of the pur.group, individually.
but my requirement demands that
the mail has to triggered for every new pur.group, all the pur orders wthin that group has to come in the mail body of that purchase group.
now actually one loop is already running, plz avoid nested loops.. and help me out asap.
I give you the following code .
all respective data declared above.
FORM form_send_mail .
SELECT ekgrp smtp_addr FROM zmmtr_ekko INTO TABLE it_zmmtr_ekko.
SORT it_final by ekgrp.
LOOP AT it_final." into wa_final.
    CLEAR: wa_objtxt,wa_reclist,wa_doc_chng,wa_objpack,g_tab_lines.
    REFRESH:it_objtxt,it_reclist,it_objpack.
Mail Subject
    wa_doc_chng-obj_descr = c_subject.
*Mail sensitivity
    wa_doc_chng-sensitivty = c_p.
*Fetching employee name
    READ TABLE it_zmmtr_ekko WITH KEY ekgrp = it_final-ekgrp.
    IF sy-subrc = 0.
      g_email = it_zmmtr_ekko-smtp_addr.
    ELSE.
      CONCATENATE c_message it_final-ekgrp INTO g_message SEPARATED BY space.
      WRITE: g_message.
      CONTINUE.
    ENDIF.
    MOVE c_hi TO wa_objtxt.
    APPEND wa_objtxt TO it_objtxt.
    CLEAR wa_objtxt.
        APPEND wa_objtxt TO it_objtxt.
      CONCATENATE c_po it_final-ebeln INTO wa_objtxt SEPARATED BY space.
      APPEND wa_objtxt TO it_objtxt.
      CLEAR wa_objtxt.
     APPEND wa_objtxt TO it_objtxt.
    DESCRIBE TABLE it_objtxt[] LINES g_tab_lines.
    READ TABLE it_objtxt into wa_objtxt index g_tab_lines."INTO wa_objtxt INDEX 1."g_tab_lines.
    wa_doc_chng-obj_langu = c_en.
*Size of message body
    wa_doc_chng-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( wa_objtxt ).
*Creation of the entry for the compressed document
    CLEAR wa_objpack-transf_bin.
    wa_objpack-head_start = 1.
    wa_objpack-head_num = 0.
    wa_objpack-body_start = 1.
    wa_objpack-body_num = g_tab_lines.
    wa_objpack-doc_type = c_raw.
    APPEND wa_objpack TO it_objpack.
*Completing the recipient list
*target recipent
    REFRESH: it_reclist.
    CLEAR: wa_reclist.
    wa_reclist-receiver = g_email.
    wa_reclist-rec_type = c_u.
    APPEND wa_reclist TO it_reclist.
AT NEW ekgrp.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = wa_doc_chng
          put_in_outbox              = c_x
          commit_work                = c_x
        IMPORTING
          sent_to_all                = g_sent_to_all
        TABLES
          packing_list               = it_objpack
          contents_txt               = it_objtxt
          receivers                  = it_reclist
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
    ENDAT.
    CASE sy-subrc.
      WHEN 0.
          WRITE: / c_mail ,g_email,c_mail0,it_final-ekgrp, it_final-ebeln, it_final-lifnr.
          SKIP 1.
      WHEN 1.
        WRITE: / c_mail1."chk mail content and do it..
        SKIP 1.
      WHEN 2.
        WRITE: / c_mail2.
        SKIP 1.
      WHEN 3.
        WRITE: / c_mail3.
        SKIP 1.
      WHEN OTHERS.
        WRITE: / c_mail4.
        SKIP 1.
    ENDCASE.
ENDLOOP.
WRITE:       / c_mail5.
SKIP 1.
ENDFORM.                    " FORM
Rgds,

The newly created database should automatically get picked up the maintenance plan.
http://sqlmag.com/sql-server/inside-database-maintenance-plans
No need to manually update the plan. I feel you need to have valid full backup for its successive Diff or Transaction log backup.
Are you getting any error in the job history?
-Prashanth

How do I stop VCA emails for every incoming phone call

I don't want all these emails cluttering up my inbox. I get an email every time I get an incoming call. Short of uninstalling Call Assistant entirely, how can I stop the email notifications of every single incoming phone call? I have made sure my settings do NOT request email notifications or alerts but it doesn't affect my getting these emails for every phone call that comes in. See example below. I added the header information manually.
===========
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Friday, December 31, 2010 6:05 PM
To: {edited for privacy}
Subject: Call from Sxxxx Txxxxxxxx(301-xx4-0xxx)
You have received a call from Sxxxxx Txxxxxxxx(301-xx4-0xxx)
===============
Date: Fri, 31 Dec 2010 17:05:25 -0600 (CST)
From: <[email protected]>
To: {edited for privacy}
Message-ID: <[email protected]t>
Subject: Call from Sxxxxx Txxxxxx(301-xx4-0xxx)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-VZ-ContextID: 1001
X-VZ-CallerName: Sxxxxx Txxxxxx
X-VZ-TN: 301xxxxxxx
X-VZ-CallerTN: 301xxxxxxxx
X-VZ-OriginalArrivalTime: 12-31-2010 23:05:25
X-VZ-Message-Type: Telephony/Call
X-VZ-Message-ID: 455484922

I was told by tech support that emails from [email protected] were controlled by Verizon and began getting sent to customers VZ_ID that is not the same as the primary Email account email address, but is the same mailbox. Verizon disabled the "Glitch" and now my VCA and TV Caller ID does not work. I was told the email notification that is entered in the VCA configuration is not the same as the VZ_ID. They stopped the Emails, now I have to bug them to fix what they broke. Don't want to be bothered right now. It is a pain to have something work and then someone breaks it.

Mail showing random emails

The other day by accident I put online my POP account in Mail and it downloaded all my emails from the server so that my IMAP account on my computer was empty as well my iPhone's mail. I then put back all the email from the POP account into the IMAP and everything got fine on my computer's mail but on the iPhone it shows me email just from two weeks ago in a random sequence (it skips two emails, then shows me three, and so on). I tried to delete the account from the iPhone and then sync it again and repeat the process many times, but always with the same problem. My next move is to download all the IMAP mails into my POP account, and start over, but I won't be able to access my old email on my iPhone. Any suggestions? Thanks.

I have the same problem and this is the very first time for me in 10 years of using macs. I did see what looked like something leaving my "outbox" for a split second the other morning, and again I started getting the undeliverable messages. I ran Norton Antivirus and did receive a message that I had a virus infected file that could not be repaired. Not sure what to do now.

IE sents 2 emails for every one email

Hello,
Iam struck with this problems since days....I have to find a solution for it...I have a email program that sends HTML content mails. When i send mails from Firefox mentioning the TO,CC,BCC there are no multiple mails. But when i open the same email program in IE and send mails ,it sends 2 mails for every mail i send. I do not see anything wrong in my code. It works fine in FireFox but not in IE. Whyyyy?????
Can anybody tell why this problem occurs. Has anyone faced a similar problem.
Pls reply
praveena

Download jnetkits from
http://www.wisesoft.biz/jnet/index.html.
There has no such problem

Mail shows same email

I've upgraded a Mavericks iMac to Yosemite and since then Mail shows the same email in each of the three different mailboxes.
I've tried to reinstall the Mac and I've also tried creating a local account but it's the same problem whatever account you log in to.
All accounts are IMAP and not even OS X 10.10.2 fixed this.
Are there anyone else out there who's got the same problem?

Try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
Reindex messages Mavericks/Yosemite

Emails sent with Mail show as double for Windows users

I just restored my computer, and trying to go back to Mail instead of the bloated Outlook. However, I am having the same problem as before:
every time i send an email, the recipient always sees a single message with double the content. This means he receives 1 email, but the content (body of email) appears twice.
It looks like the email shows the HTML version first, and then you scroll down and see the PlainText version at bottom. This ONLY happens on my emails being sent to Windows users.
While it might not be bad for a single message or two, when we have long email chains it results in really really long email chains getting doubled and doubled. Its ridiculous.
Can anyone suggest a solution to this so that I can go back to using speedy Mail?

wow...well...ummm....sometimes people need more then plain text for business emails?
while that is a "solution" its not a viable option.
i need a solution that allows me to send html email so that windows users can view like a normal email, and not double content.

Since adding over 600 tags my computer is slow and Mail shows wrong emails in previously working intelligent folders... What to do?

Hi,
this is my situation: I have a MacBook Pro 15'' with 2,8 GHz Intel Core 2 Duo running on Mavericks. The transition to Mavericks a week ago was smooth, and I was happy to find out that my many OpenMeta tags (I've been tagging my files for over 7 years now) were easily converted into Mavericks tags using Leap (Ironic Software). I did notice, though, that even though Mavericks recognized all my existing tags, only those that I had entered "per hand" in Mavericks, were candidates for auto-completion in the entering/tagging process, while the others needed to be written out completely if I wanted to use them on a new file. So after a while I decided to look for a solution (I didn't want to risk creating similar tags to some already existing) and I had the idea to copy all my existing tags in one go from the Tags Window in Leap (685 in total) and paste them into the Mavericks tag window for one experimental file.
It worked. Now all my tags are shown in the Mavericks tags list and are auto-completed when prompted.
BUT since then my computer has been acting strange:
It has slowed down somewhat.
When I try to scroll down the complete list of my tags in the Mavericks tagging window Finder crashes.
And my intelligent mailboxes in Mail are now buggy. For ex. an intelligent folder programmed to show me all emails received today, will now show all of today's emails plus about 20 others from years past (dating as far back as 2009) many of them with "empty" senders, recipients and subject lines.
I have to add that all of this happened a few hours ago and that it seems as if the contents of the intelligent folders are getting updated as I write (but not necessarily in a good way)... Does that mean that my mac is rebuilding some indexes somewhere or anything of that kind?
So should I just wait and hope things will get better? Or is there anything I can do to correct the problems?
Thanks in advance.

No problem with versions not matching.
In the Finder, open Home/Library/Mail and find one account folder (will begin with POP if POP account, etc). Open the account folder and locate the INBOX.mbox folder (or INBOX.imapmbox if using IMAP), and then tell me if there is a Messages folder within, and if so open that and observe the number of files it contains?
Ernie

Mail sending 2 messages for every 1 sent ("sending 2 of 2 messages")

hi... did a search, but it was a tough one to search for.
an odd problem: mail says it's sending 2 messages for each message i send. for instance, i type a note to my mom (because i'm a good son) and hit send on the one email... the status bar at the bottom left of the panel says: "sending message: 2 of 2" or "outgoing messages: 2 of 2"...
however, in checking the sent folder, only 1 message sent.
it does not do this all of the time, but about 1 out of every 5 messages, it seems...
i'm worried about malware, spyware, etc... would there be such a thing? why is mail acting weird?

There are no viruses for Mac OS X, and no malware can be installed without you providing your Admin password, so you don't have that, either.
This is normal behavior, because you have an IMAP email account. In order for everything to be in sync, the mail server and your Mac must communicate very frequently, and that includes whenever you send or receive email. The message may say one thing, but unless you see multiple, identical messages being sent or received, it's not happening. There's no such thing as invisible email.
Mulder

Mail shows blank body for messages

sometimes mail refuses to show the bodies of certain messages for me.
typical sequence:
1 start mail.app
2 use it for a while (working normally)
3 notice that certain message bodies appear "blank"
when #3 occurs, i select a message in list view and the preview window (where you usually see the contents or body of the message) is totally blank. once this happens for one message, it seems to also happen for many of my other messages, too. that is, if i try to select a different message (even one whose body i was just reading a few seconds ago), it now shows up with a blank preview window. i also try double-clicking to open the message in it's own window - the body part of the window is blank. i try printing the message - the body part comes out blank.
if i quit mail and restart and come back and view the same message, i can see the body ok (for a while, at least - until the problem eventually happens again). thus, this feels to me more like an issue of some kind of memory leak or some system resource being exhausted rather than some corruption of my mail files or preferences.
some things i have noticed:
- if i go to view->message->plain text alternative, i can sometimes see a plain text view of the message. this works for certain messages. for other messages (which seemingly don't have plain text alternatives) i can't do this. and for certain messages (seemingly those which were sent as raw text), i can see their bodies without doing this. the pattern seems to be that i can view text-only messages or plaintext-views of messages which provide them but i can not view them as formatted text.
- i can always view the raw text of messages.
- once this problem occurs, if i try to compose a new mail message, the window pops up and looks normal except i can not select the body part of the message. that is, hitting tab which usually works to move through the header fields and puts the cursor in the body field, simply fails to move the cursor to the body. clicking directly on the body just causes the cursor to disappear. so it is impossible to compose a new message.
- once the problem occurs in a particular instantiation of mail.app, it never seems to go away. the fix i know of is to quit mail. that always seems to make it go away, though only temporarily.
i'm wondering if anyone has experienced this problem and may have any hints as to the root cause. i should warn that i am a a bit skeptical of claims of simple fixes such as simply deleting and rebuilding the envelope database, deleting preferences, etc., because i already know that the problem is tricky in that it goes away with every restart of mail.app anyway which can lead to false reinforcement of various theories.

Mulder wrote:
That's nonsense; the problem doesn't go away, it merely doesn't manifest immediately, which tells us it's still there. More often than not, there is a simple fix for an underlying issue; of course, if you'd prefer something much more complicated, I'm sure we can give you all those machinations.
sorry - i should have been more precise and said the symptoms go away after restarting mail. i said what i said because my experience is that this type of scenario sometimes tends to lead people to conclude falsely that they have identified a solution when in fact they have not. this is why, for example, "reset pram" always was claimed a solution to dozens of problems for which it had absolutely no connection. it was because merely restarting the machine (an essential precursor to resetting pram) made symptoms go away in many cases.
as to your specific point, i have rebuilt envelope index in the recent past and i'm still having the problem. i can't say for sure that it is not the case that something messed up the file in the past and has now messed it up again, so i will give it a try.
thanks.

When I click on "Get Mail" I get emails for only 2 of my 3 accounts.

Clicking on "Get Mail" only brings in the messages for 2 of my accounts. I have to click in the down arrow next to the icon and select the third account from the list, then it works. How do I include this last account in the Get Mail operation?
I've reviewed the account settings and can find no significant difference in the settings for all 3 accounts. Can anyone help, please?

Thanks.
I tried that and it connected without any problems. But it still won't respond when I click on "Get Mail."
I just installed PostBox and it retrieved all my new email without any issues. Haven't sent any mail, but I imagine it should work fine. But will only purchase his app if I can't get Mail to work. It's very easy to use and it somewhat looks like Mail.

Sending mail to multiple emails for one card...

We are room parents. We made a card for each child in the class, then pu the mother's email in the 'work' email field and the father's email in the 'home' email field.
So when we send out a class email we would like it to go to both mother and father - can't seem to do it.
Any ideas?
thanks

post to the Leopard mail gurus here:
Mac OS X v10.5 Leopard > Mail and Address Book
http://discussions.apple.com/forum.jspa?forumID=1223

Notification mailer not sending emails for PO approvals and requistions etc

I started my notification mailer
Edited it and gave the smtp server IP there..I did go into advanced settings
Than i ran a request and selected an employee defined as user in the apps for notify in the options..i saved the employee earlier with its email address
it was working fine, but for this, shud the email address has to be defined with the user or the employee that is attched to the user?
Second problem
on PO approval cases, the PO maker is not receiving emails when the PO gets approved..and the approver is not receiving email notifying him that he has received a PO for approval
Can you please tell me what am i missing?

Hi,
the diagnostic i ran was accoring to the note
Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test [ID 748421.1
It has so many output files
which one should i post
Did you get any error/warning messages? If yes, post this part only here.Regards,Hussein

Mail shows count 0 for some flags, but no mails

I have 2 flags that work not correct, the yellow flag shows a count of 1, but if I select the flag no mail is shown, the blue flag, I renamed it, shows a count of 7, but also no mail in the list the red and green flag work as expected, the count next to the flag match with the mails the program listed. Is there a file where I can correct this issue?

I found the sollution:
http://support.apple.com/kb/PH11704

Mail showing 2 emails for every 1

Similar Messages

Maybe you are looking for