Mail Signatures, Folder Organization, Notification and Attachments not working the same since upgrade to Mavericks

Hi All,
Normally very quick to do so, I’ve been hesitant to upgrade to Mavericks based on so many issues being reported with Mail + Gmail.
Previously Apple released a fix for these issues and I still waited a while. This weekend I upgraded to Mavericks and Mail is definitely not working as I’d expect it.
Some of the things I notice include:
1) My saved mail folders, previously in alphabetical order, are now in reverse alphabetical order and dragging them to be in a different order has no effect
2) Previously when I clicked on a message and pressed Message > Remove Attachments the message would reappear in my inbox within a second or two, without the attachment. Now, the message simply disappears.
3) The little red icon no longer appears in the dock when a new message arrives
4) For my various accounts, signatures do not appear/disappear as I select a different From account (each of my accounts has different signatures).
Does anyone have thoughts on any of these items?
Thanks,

Not an answer, but a repeat ...
I too have problem (2) -- Remove Attachment now makes the email in question disappear (in fact moving it to Archive).
Help would be appreciated.
(Have just moved from Lion to Mavericks.)

Similar Messages

AVReceive2 and AVTransmit2 not work the same...HELP

I am using AVReceive2 and AVTranmit2 in a programs I am developing. I have run the two programs as the standalones they are and I get the video or audio I send across. But in my program when the program calls up the routines it launches and only does a hand full of what it should do. It is also like the SessionListener, ControllerListener, and ReceiveStreamListener are missing. The program listens for a RTP connection to come in but it never completes the action when I know that there is a connection being attemped. The same istrue for the AVTransmit2 it does not create the RTP session that I know is supposed to go out. It is like skipping a large piece of code. Even though they are all contained correctly. If someone can give me an answer to why these two programs work out side of what I am doing and why they are not in what I am building it would be highly appreciated. ASAP I need this working by tomorrow morning. Thanks
public CommPt(String rcvr,String sender,String rcvr2) {
        initComponents();
    //    System.out.println("start to receive signal");
   //     if (pick.equals("Receive")){
   //     at = new AVTransmit(new MediaLocator("vfw://0"),"192.168.1.101","22222",null,new MediaLocator("javasound://8000"));
   //             at.start();
   //     String argsv[]={"192.168.1.102/22222","192.168.1.102/22224"};
        avReceive = new AVReceive(rcvr);
        avReceive.start();
   /*     while((avReceive.getConnection()).equals("false")){//carlos
            System.out.println("2");//carlos
            if (!(avReceive.getConnection()).equals("failed")){//carlos
                System.out.println("3");//carlos
                avReceive =new AVReceive(rcvr2);//carlos
                avReceive.start();//carlos
                break;//carlos
            }//carlos
        }//carlos*/
      /* if (!avReceive.initialize()) {
         System.err.println("Failed to initialize the sessions.");
         System.exit(-1);
        // Check to see if AVReceive is done.
        try {
         while (!avReceive.isDone())
          Thread.sleep(1000);
     } catch (Exception e) {}
     System.err.println("Exiting AVReceive");*/
    //    if (pick.equals("Transmit")){
                Object stand=new Object();
             //   System.out.println("Start Time delay");
                try{
                    Thread.sleep(5000);
                catch(Exception ex){
                    System.err.println(ex);
             // System.out.println("time delay ended");
                String [] temp2;
                temp2=sender.split("\\ ");
                at = new AVTransmit(new MediaLocator(temp2[0]),temp2[1],temp2[2],null,new MediaLocator("javasound://8000"));
                at.start();
    }Edited by: Laughincrow on Nov 29, 2009 5:02 PM

Laughincrow wrote:
ASAP I need this working by tomorrow morning. ThanksI guess since it's tomrorow morning I shouldn't bother to comment on this thread...
P.S. If you don't want to take the time to remove your commented-out code that makes it nigh-on impossible to see what your code is actually doing, then why would anyone want to take the time to help you?

Itunes 10.6.1.7 I have 2 sets of playlists the first set displays greyed out lists and does not work The second set is fine. How do I get rid of the non working set of playlists?

I have 2 sets of playlists in the sidebar of itunes. I have recently upgraded to 10.6.1.7 but this condition remains the same
The top list refers to greyed out listings and does not function
The list below works fine
How do I get rid of the "false" list?

I think the greyed out playlists must be listed from your device which is set up to mirror your library. Because the device is synced you can't edit content directly on the device. From the top of the left-hand column do you have?
Library > Music, Movies...
Store > iTunes Store, iTunes Match...
Devices > <Your Device> > Music, Movies, and all the other "dummy" lists...
Genius > Genius, Genius Mixes...
Playlists > iTunes DJ, and then all your playlist folders and playlists...
If so then that is perfectly normal when your device is connected, either directly or over wi-fi and you have the lists expanded. Simply click the small triangle to the left of the device name to hide all the playlists.
tt2

[TroubleShooting]Continuity Wi-Fi issue. iPhone and mac not on the same wifi network

Ive been following this and other forums since Yosemite came out few weeks back & i can see many other people are having this issue as well.
The issue is that I'm not able to make/receive calls on my MBP using my iPhone via continuity.
Ive tried all of the possible solutions made here and elsewhere on how to resolve this issue. [playing about with settings and iCloud]
When I'm at home all of the handoff and continuity features work apart from making and receiving calls. Tells me my mac and iPhone are not on the same wifi network, even though they are.
Now, the solution?
Now this is where tourbleshooting comes in. Ive taken my mac and to my homegirls house & all of the features worked including phonecalls, without changing anything, except?? THE ISP and the router at her house.
Personally i live in London, Uk. At home i have sky, and my girl has TalkTalk.
So im 99.9% sure this has nothing to do with the OS X, but rather its the ISP or the router.
Now I'm asking for help from anyone that understands the ISP's and routers, on what kind of issue there might be. Im no computer wiz kid, but I'm guessing it could be something that has to do with the NAT type. (Call of duty on ps3 haha) At my house its moderate and my homegirls - open? could that be the issue? if so are there any router settings i can play about to see if that solves the issue?
Thanks.
Please only post if you know what you're talking about because i don't want anyone giving me some next instructions for my router so i end up without internet what so ever haha And whoever is having the same problem, id appreciate if you'd post on this to keep the post alive

Hey chrisfromdc,
If you are having an issue with your Mac being unregistered with iMessage and FaceTime, I would suggest that you troubleshoot using the steps in this article -
If you have difficulty activating FaceTime or iMessage - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Servlet jndi lookup to remote EJB, servlet and EJB not in the same application

Hi,
I think that the subject explain my problem.
I have Oracle IAS9i 9.0.2.0.0, and JDeveloper 9.0.2.829
I have deployed and EJB in IAS9i and i want to use from the developer machines, which have JDeveloper.
how can i to do remote calls from JDeveloper?.
I have modifed the orion-application.xml, and added remote=true.
I have modifed the rmi.xml and added the hosts where the Jdeveloper placed.
Any ideas?
Thanks and cheers
P.D The app server and jdeveloper are in the same net.
if it is posible replys me to [email protected] too.

Steps to access a remote EJB from within OC4J
++++++++++++++++++++++++++++++++++++++++++++++
1) Deploy EJB application (ApplicationRemote) to remote container (REMOTE)
"java -jar admin.jar -deploy ormi://REMOTE.hostname:REMOTE.port REMOTE.username REMOTE.password -deploy -file ApplicationRemote.ear
-deploymentName ApplicationRemote"
2) Ensure that local application (ApplicationLocal) has ejb-ref tags for remote EJBs accessed (in web.xml or ejb-jar.xml)
3) Deploy to local container (LOCAL) an empty application (ApplicationEmpty) with the same name as the remote application (ApplicationRemote)
"java -jar admin.jar -deploy ormi://LOCAL.hostname:LOCAL.port LOCAL.username LOCAL.password -deploy -file ApplicationEmpty.ear -deploymentName
ApplicationRemote"
5) Deploy local application (ApplicationLocal) to local container (LOCAL)
"java -jar admin.jar -deploy ormi://LOCAL.hostname:LOCAL.port LOCAL.username LOCAL.password -deploy -file ApplicationLocal.ear -deploymentName
ApplicationLocal"
4)Restart local container
ApplicationEmpty should consist of just an application.xml file - no modules. The same file can be deployed with different application names for all the remote
applications that must be accessed.
ApplicationLocal should access the remote EJB by using the following JNDI properties
java.naming.factory.initial = "com.evermind.server.rmi.RMIInitialContextFactory"
java.naming.provider.url = "ormi://REMOTE.hostname:REMOTE.port/ApplicationRemote"
java.naming.security.principal = "REMOTE.username"
java.naming.security.credentials = "REMOTE.password"
regards
Debu Panda

Oracle Forms 10G(tabbed canvasses not working the same as in Forms 6i)

Hi everyone,
I have a form which gets called from another form through a list of value. The called form(second form) has a group of tabbed canvases which get displayed depending on the parameters passed from the first form.
The Form is working prefectly fine in Forms 6i but when I converted the same form in to forms 10G it does not seem to work the same way. The tabbed canvasses are not getting displayed. I am manually having to press the execute query to get data displayed in the tabbed canvasses. I checked the parameters that are being passed and they are the same as that in Forms 6i.
Please let me know where my 10G Form is going wrong. Appreciate your help, please send me an email on [email protected]
Thanks

duplicate
Re: Oracle Forms 10G not working as Oracle Forms 6i

Push notifications and GPS not working on wifi - please help

Hi,
I have an iPhone 4 with at&t (US) and latest iOS. but I am outside the US for a month and I have put the phone in airplane mode so that I don't receive phone calls or texts (I can choose not to answer phone calls but apparently I will receive the texts no matter what unless I put it in airplane mode)
But I still use the iphone for everything else. I have the wi-fi on and I have my own wi-fi network where I'm staying.
but i'm having problems:
1. I do not get any push notifications on my iphone. I have not modified much from the default wifi router settings. all i have done is set a WPA TKIP password. all the other settings are the default. no port filter or firewalls on the router as far as i can see.
2. google maps is not able to pinpoint my location. I can see the maps fine. but when i hit the button to locate my position, it tries for a while and then says "cannot determine location".
3. after a while with the iphone in 'sleep mode' (i.e. the screen is off - the phone is not off), when I turn the screen back on and try the use the iphone with the wifi, the internet no longer works although it shows that it is connected to the wifi network. then I have to go to the settings on my iphone for the wifi network and hit 'renew lease' for the internet to work again on my iphone. this is really annoying....
.. and *I do not have any of these problems when I'm on anyone else's wifi network*. so, I'm guessing this has something to do with my personal wifi connection at home.
can someone help me figure this out?
the wi-fi router is an Aztech HW550-3G. and the broadband connection is from a WiMax internet modem.
here are some of the screens from the wifi config page
http://dl.dropbox.com/u/3171340/router/network-internet.jpg
http://dl.dropbox.com/u/3171340/router/network-local.jpg
http://dl.dropbox.com/u/3171340/router/system-info.jpg
http://dl.dropbox.com/u/3171340/router/wireless-security.jpg
http://dl.dropbox.com/u/3171340/router/wireless-settings.jpg
thanks!
Julian.

Your problem is there is no record of where your base station is. Since you have airplane mode on your phone cannot use the gps receiver or the mobile network to pinpoint the location. For the location of the base station to be known it needs to be recorded in a database on the internet.
Instead of turning on airplane mode, remove the SIM from the iPhone. With airplane off and no SIM you will be able to use GPS but not make or receive phone calls and text. It may also update the location database with your base station location, but I cannot confirm it.

Mac mail - can't type message and reply not working.

mac mail working fine until today. Tried to set up a new message. Added address okay, put in subject okay but when I came to type text into main panel I get about three letters typed and the curser vanishes and I get an alert sound. And that's the way it stays.
Tried reboots and all the usual tricks.
Also trying to reply to an email does not work
Everything else appears alright. Incoming mail is okay.
Can anybody help me out here? Desparately need to be back online.

This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

Notifications and NC not working

Hi.
This morning, I just woke up and realised that the notification center was clear, so I tried restarting the iPhone to see if it solved the problem but it didn't.
Then went to Settings>Notifications and I have the following
As you can see, the apps or widgets just like the weather one are not loading so I can't do anything there, I left it loading a long time but nothing happenned.
I should say that the weather widget DOES work on the lockscreen, but in the NC nothing works.
I tried restarting and connecting the iPhone to the PC but nothing worked
Any solution?

Try resetting the Phone:
Hold down the Sleep/Wake & Home buttons until the screen goes dark and you see the Apple logo.
Check again

Push notifications and imessage not working

Since upgrading to iOS 7.0.4 on my iphone 4 I cannot use iMessage, Facetime or get any push notifications from any apps.
Any suggestions?

HAve checked in the notification centre for the apps to be allowed to show push notifications.

Iphoto and Itunes not showing the same number of photos in albums

why does the number of photos in an iphoto album is not the same when synching my iphone. For example, in iphoto, my "family" album has 2700 photos, but in Itunes it only shows 2675. I have included the videos also. Thanks

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Why are Bounce in Arrange and Environment not 1 & the same?

Just wondering why (like in 8) Bouncing in the Arrange window and in the Environment are different? I noticed this again in 9, when doing stems, bouncing in the Environment (so I can solo different tracks more quickly) I was wondering why on earth LP9 was adding tracks to the Audio Bin despite the box not being ticked. I clicked on Bounce in the Arrange, and sure enough, the Add to Audio Bin button was checked.
Does anyone know why it seems these Bounce buttons are independent of each other? The other issue is if you have a solo output (if I'm bouncing Mono) - and click on bounce in the Arrange window - it makes the file stereo (The Interleaved/Split menu is selectable) where as doing the same thing in the Environment (albeit clicking bounce on the mono output channel) Greys out that field on Split (as it should be)
B

Ben Collier wrote:
Hi Erik - sorry to take so long to reply - I didn't get an email reminder - odd...
I think they reset something on the forums, because my subscription to the forum was gone a few days ago as well, I had to subscribe again (which is not really a chore, luckily... )
The Bnce button at the bottom of the Out 1-2 in the Environment (I don't use the mixer)
Mixer & env mixer are the same thing, really.
and the Bounce button at the top of the Arrange window
Now I have to start Logic, a bounce button at the top of the Arrange window...?
Ah, now I get it, the toolbar! (I never use that and click it away in all my projects & templates.)( That is the same command as choosing bounce from the File menu, or hitting ctrl-B (my KC for Bounce
are not going to the same bounce window (odd I know!). I've noticed that if the Arrange-Bounce window has "Add to Audio Bin" selected and the you bounce (or press Bnce) from the Environment window, and switch "Add to Audio Bin" off in the Environment's Bouonce window - it will still add them to the audio bin because that setting is on in the Arrange Bounce window - it's driven me bonkers on many occaisions! Try it - you'll see what I mean. It's been there in 8 and it's still there in 9.
Actually, I do not see it behave like this. Here it appears that both bounce windows are in fact identical, and that wherever the last setting was made, that becomes the setting the next time you get a bounce window, either from the Env mixer or from the Bounce command in the File menu or indeed the bounce button in the toolbar or in the 'regular' mixer. They all pop up the same window, with the last set settings still set. whether it be *Add to Audio Bin* or *Add to iTunes Library* plus all combinations of both and neither.
I've also noticed level differences on our main rig when importing them, despite both being bounced at 96 and in realtime.
I find it quite difficult to say this, but I think those differences have nothing to do with the method of bouncing. And it being at 96 kHz does not mean it has audibly different levels, on the contrary, a bounce at 96 is probably not discernable from one at 48, in a blind listening test.
I'm convinced that in whatever way you give the command to bounce, it is the same process. There must be another overlooked factor responsible for those level differences. I trust you have the Normalise function Off when you bounce? And you have not changed the pan law settings between bounces? And no plugins that use some Random settings?

Urgent - Things not working the same in server and local machine

Hi,
I have created an advanced table under advanced table as per the instructions in the dev guide. When the Add Row button is pressed in the parent table, I am inserting rows into the child VO and hence I should see rows in the child table in the UI. This is working fine in local machine. But when I deploy in the server it is not working. The child table is showing no search conducted. I have good OAF experience and have deployed things properly. But what could I be missing?

Hi Sumit,
"If the Child VO is not getting executed, please check the code which is responsible to execute the child VO. Do pay attention to exit clauses (like if conditions which skips a clause) and pay attention. "
- If those things were a problem, it wouldn't have run in the local machine also right? Also, I ran diagnostics on the server and I can see the child VO is having the rows. It is something to do with the association of the child with the parent. But again: it's working fine on the local. That's what is bothering me and that's why I need some expert help. If you want, I can send you the page, controller and the AM ( 3 files)
Of course redeploying the entire code, importing pages and bouncing is an option that could be explored.
- Done that multiple times with a lot of care. Cleared Cache etc etc.

Internet and data not working after iOS 7 upgrade

Help! Still no internet after the ios7 upgrade. Apple has told me many things. Have restored network settings, done a hard refresh, back up and restored. Try the sim in another phone (internet worked). Take to an apple store (3.5hrs away thanks but no thanks). Can Anyone help?

Have you tried restoring as a new device (not from a backup)?

LENOVO Z51 MOUSE AND KEYBOARD NOT WORKING AT SAME TIME

I know this question has been asked before, but those solutions do not work for me. I just got my new Lenovo z51 80k60030us and I quickly put a game on it just to test out the waters. ran well. However, I can't move (use the keyboard) and look around (use the mouse) at the same time. I looked all over the internet and understood that it has something to do with "palm tracking" however no one had the solution for my specific mouse/keyboard issue. when I try and change the options under the lenovo mouse, it is grayed out. I tried everything to ungray it, but I have yet to succeed. help please??

ColonelONeill wrote:
Try using a newer generic Synaptics driver?
http://www.station-drivers.com/index.php?option=com_remository&Itemid=352&func=fileinfo&id=1602Thank you very much! I was looking for a generic Synaptics driver, but there website didn't even have one for windows 10... Again, thank you very much.

Mail Signatures, Folder Organization, Notification and Attachments not working the same since upgrade to Mavericks

Similar Messages

Maybe you are looking for