Mail sound after sleep

Hi
Sometimes after sleeping my 5K iMac stops playing sounds from mail (all other sounds work fine).
If you go into the mail settings and change the sound it doesn't make any noise. Quitting mail and relauching fixes the issue.
Anyone else the same?

same here
I had power nap on.
I turned off power nap.
Now after it goes to sleep, it will wake up and still make the sent sound.
good luck

Similar Messages

Mail won't make new-mail or sent-mail sounds after sleep

I've had this issue for the last 6 months, probably ever since 10.7.3 update in May.
Mail stops making the usual noises after going to sleep one or two times. The weird thing is that it will store all the unplayed noises in a buffer and then suddenly decide to play a few months worth of sent-mail and incoming-mail noises at a rate of one per second for several minutes upon waking up. Apple was no help.
Restarting seems to solve the problem until the next sleep cycle when it starts up again. I did a full restore twice and it made no difference
Apple's mail specialist hadn't ever heard of this issue before when I called in September. It's not a game stopper but I worry it might be a hardware issue that I'd like to have fixed before my warrentee runs out.

I've never seen anything like this reported before. Verify/repair your disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
If the problem persists, proceed as follows:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that the Console application displays the contents of both system.log and console.log.
3. Try to reproduce the problem, and look at the bottom of the Console windows for messages that could have been written there as a result. Do you see anything that could provide a clue as to what's going on?
Now, try this:
1. Go to Apple Menu > System Preferences > Accounts, and create a new user account for testing purposes.
2. Either log out of your main user account or just quit Mail so that it does not interfere with the other user account.
3. Log in as the newly created user and set up Mail anew there. Does the problem happen there as well?

Mac mail makes no sound after sleeping

Why does Mac Mail stops making the new mail alert sound after falling asleep? How can I solve this?
I have to close mail, wait a few seconds, then reopen to restore the sound. Very annoying.

Reset The Pram
http://support.apple.com/kb/ht1379
(Try several attempts to get the corect sequence)
Reset the SMC
http://support.apple.com/kb/ht3964

Satellite P100 - No sound after sleep mode or hibernation on Windows 7

Hello everybody,
I am desperately looking for a solution for my sound problem on my PC after having browsed many forums that were talking about the same issue but without effective solutions either.
I am posting this message as I am having a Toshiba P100-488 laptop running Windows 7 64 Bits (after having upgraded the CPU) and which is using a Conexant CX20549 sound chip.
Everything is working properly and so does the sound chip thanks to a Windows 7 64 Bits driver installed but I noticed that after coming back from the sleep mode or hibernation, then sound device is still recognized in the Device Manager and shown as active in the Control Panel and the task bar but unfortunately, no sound is coming out of the speakers.
I have tried several drivers (including those of Dell and HP on some sites) but still the same problem.
Also, I have tried to update the driver from Windows Update that suggested the Conexant SmartAudio HD2 but same behaviour.
Is there any of you who would have a solution for me or perhaps a relevant driver that could solve this annoying issue ?
Many thanks in advance.
Best Regards,
Fred

This appears to be completely a Realtek Software (Driver) problem, that has not been fixed well over a year after the issue has been brought to public ([Toshiba Forum|http://forums.toshiba.com/t5/Audio-Sound/Sound-off-after-Sleep/td-p/173036|Toshiba Forum]) notice.
When putting the laptop to sleep and waking back up in a different power state than it went to sleep in, sounds stop working.
Example: +Power plugged in, put laptop to sleep, power unplugged, wake up laptop, no sounds (and no microphone).+
A reboot fixes this. This points to a software (driver) problem & not a hardware problem.
Putting the laptop to sleep and starting up again in the same power mode that was in effect before the sound was lost is one way to avoid this happening. However this appears random, sometimes it works, more often it doesn't, and it is often inconvenient to put the laptop to sleep again when it is noticed sound is not working.
The quick fix, (workaround) that seems to work most all of the time {color:#0000FF}(_[m-267849#267849]_){color}in another post on this forum.
This is a *TEMPORARILY FIX* to this {color:#ff0000}*VERY IRRITATING LONG PENDING PROBLEM*{color} that has been {color:#ff0000}*neglected*{color} by Toshiba and Realtek.
One ends up having no choice but to believe that the management of Toshiba does not really care all that much about its customers when they leave a known problem unfixed for years. That is sad, considering Toshiba's slogan is "Leading Innovation." A broken innovation is just that, broken, and a +real+ leader does not leave its products broken.

TS3276 Mail error after sleep mode -'unable to connect'.

Macbook air 10.8.4.Connection doctor says to check passwords etc. If I quit mail and then open it again, error message gone and sends and receives OK, which indicates that the settings are right. Any clues?

The cause of this issue is unknown. See the following discussions for some possible solutions:
Mail Connections Lost After Sleep
DSL-2750U router problems with POP Mail

IMac freezing on Safari, Mail, itunes after sleeping

I've had a problem for the past 4 days with my iMac freezing mainly when on Safari, Mail, iTunes...
It happens most times after it sleeps, then I can't quite and have to force quite, then it won't restart or shut down
I have to force shut down... It will then reboot ok and work ok for so long then goes again mainly after sleeping.
When for example Safari fails, Firefox still works fine?!
I've gone into the disk utility and verified the permissions and checked the drive. all ok!
and I've reset the RAM and totally unplugged the iMac.
I've read on some post advising not to reinstall and it's a software issue and should wait for the next update?
Is anybody having the same problem?
iMac 21.5-inch Mid 2010
3.06 Ghz Intel i3
12 GB 1333 Mhz DDR3
ATi Radeon HD 4670 256MB
OS X 10.8.2 (12C60)

Hi Linc
Many thanks for your help.... I hope I've done this as requeseted?
13/10/2012 08:37:02.625 WindowServer[382]: handle_will_sleep_auth_and_shield_windows: no lock state data
13/10/2012 08:40:28.536 com.apple.launchd.peruser.501[433]: ([0x0-0xe29e29].com.apple.Notes[4560]) Exited: Terminated: 15
13/10/2012 08:40:48.353 com.apple.launchd.peruser.501[433]: ([0x0-0xe2ae2a].com.apple.Safari[4562]) Exited: Terminated: 15
13/10/2012 08:40:56.662 com.apple.launchd.peruser.501[433]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 8 seconds
13/10/2012 08:40:56.894 com.apple.launchd.peruser.501[433]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 8 seconds
13/10/2012 08:41:51.966 loginwindow[375]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
13/10/2012 08:41:51.966 loginwindow[375]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
13/10/2012 08:41:53.524 com.apple.launchd.peruser.501[433]: ([0x0-0x74074].com.apple.iCal[740]) Exited: Terminated: 15
13/10/2012 08:41:56.678 com.apple.launchd.peruser.501[433]: ([0x0-0x46046].com.apple.mail[559]) Exited: Terminated: 15
13/10/2012 08:42:03.772 com.apple.launchd.peruser.501[433]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 8 seconds
13/10/2012 08:42:03.780 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.780 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.781 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.781 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.781 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.782 WindowServer[382]: dict count after removing entry for window 0x34 is 0
13/10/2012 08:42:03.796 com.apple.launchd.peruser.501[433]: ([0x0-0x3b03b].com.apple.inputmethod.ironwood[517]) Exited: Killed: 9
13/10/2012 08:42:03.807 coreservicesd[83]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=264
13/10/2012 08:42:03.807 coreservicesd[83]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=264
13/10/2012 08:42:03.815 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.816 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.816 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.816 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.816 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:03.818 coreservicesd[83]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=271
13/10/2012 08:42:03.918 com.apple.launchd.peruser.501[433]: (com.apple.talagent[447]) Exited: Killed: 9
13/10/2012 08:42:03.938 coreservicesd[83]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=553
13/10/2012 08:42:04.015 com.apple.launchd.peruser.501[433]: ([0x0-0x48048].com.apple.AppleSpell[572]) Exited: Killed: 9
13/10/2012 08:42:04.048 loginwindow[375]: DEAD_PROCESS: 375 console
13/10/2012 08:42:04.056 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:04.056 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:04.056 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:04.056 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:04.057 WindowServer[382]: CGXGetConnectionProperty: Invalid connection 9223
13/10/2012 08:42:04.057 coreservicesd[83]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=236
13/10/2012 08:42:07.841 EPSON Scanner[501]: ERROR: Image Capture Extension went away!
13/10/2012 08:43:13.000 bootlog[0]: BOOT_TIME 1350114193 0
13/10/2012 08:43:24.000 kernel[0]: PMAP: PCID enabled
13/10/2012 08:43:24.000 kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
13/10/2012 08:43:24.000 kernel[0]: vm_page_bootstrap: 2949399 free pages and 179945 wired pages
13/10/2012 08:43:24.000 kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
13/10/2012 08:43:24.000 kernel[0]: zone leak detection enabled
13/10/2012 08:43:24.000 kernel[0]: standard timeslicing quantum is 10000 us
13/10/2012 08:43:24.000 kernel[0]: standard background quantum is 2500 us
13/10/2012 08:43:24.000 kernel[0]: mig_table_max_displ = 74
13/10/2012 08:43:24.000 kernel[0]: corecrypto kext started!
13/10/2012 08:43:24.000 kernel[0]: Running kernel space in FIPS MODE
13/10/2012 08:43:24.000 kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/2012 08:43:24.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
13/10/2012 08:43:24.000 kernel[0]: corecrypto.kext FIPS POST passed!
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=5 Enabled
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
13/10/2012 08:43:24.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
13/10/2012 08:43:24.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
13/10/2012 08:43:24.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13/10/2012 08:43:24.000 kernel[0]: calling mpo_policy_init for Sandbox
13/10/2012 08:43:24.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13/10/2012 08:43:24.000 kernel[0]: calling mpo_policy_init for Quarantine
13/10/2012 08:43:24.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
13/10/2012 08:43:24.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
13/10/2012 08:43:24.000 kernel[0]: The Regents of the University of California. All rights reserved.
13/10/2012 08:43:24.000 kernel[0]: MAC Framework successfully initialized
13/10/2012 08:43:24.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
13/10/2012 08:43:24.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
13/10/2012 08:43:24.000 kernel[0]: ACPI: System State [S0 S3 S4 S5]
13/10/2012 08:43:24.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0000
13/10/2012 08:43:24.000 kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
13/10/2012 08:43:24.000 kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
13/10/2012 08:43:24.000 kernel[0]: [ PCI configuration begin ]
13/10/2012 08:43:24.000 kernel[0]: [ PCI configuration end, bridges 1 devices 6 ]
13/10/2012 08:43:24.000 kernel[0]: [ PCI configuration begin ]
13/10/2012 08:43:24.000 kernel[0]: console relocated to 0xf80010000
13/10/2012 08:43:24.000 kernel[0]: PCI configuration changed (bridge=2 device=1 cardbus=0)
13/10/2012 08:43:24.000 kernel[0]: [ PCI configuration end, bridges 8 devices 21 ]
13/10/2012 08:43:24.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
13/10/2012 08:43:24.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
13/10/2012 08:43:24.000 kernel[0]: rooting via boot-uuid from /chosen: A1959C11-C077-3E46-8990-F9391C868323
13/10/2012 08:43:24.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13/10/2012 08:43:24.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
13/10/2012 08:43:24.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
13/10/2012 08:43:24.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
13/10/2012 08:43:24.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
13/10/2012 08:43:24.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
13/10/2012 08:43:24.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST3500418AS Media/IOGUIDPartitionScheme/Customer@2
13/10/2012 08:43:24.000 kernel[0]: BSD root: disk0s2, major 1, minor 2
13/10/2012 08:43:24.000 kernel[0]: jnl: unknown-dev: replay_journal: from: 37367808 to: 39568384 (joffset 0x1638e000)
13/10/2012 08:43:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 78ca39fffe14d2ea; max speed s800.
13/10/2012 08:43:24.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
13/10/2012 08:43:24.000 kernel[0]: USBMSC Identifier (non-unique): 4C4446593035363203 0x4b8 0x851 0x100
13/10/2012 08:43:24.000 kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 3 sc_chainmak 0
13/10/2012 08:43:24.000 kernel[0]: 2.102114: ath_get_caps[4013] tx chainmask mismatch actual 3 sc_chainmak 0
13/10/2012 08:43:24.000 kernel[0]: 2.106553: Atheros: mac 128.2 phy 13.0 radio 12.0
13/10/2012 08:43:24.000 kernel[0]: 2.106564: Use hw queue 0 for WME_AC_BE traffic
13/10/2012 08:43:24.000 kernel[0]: 2.106571: Use hw queue 1 for WME_AC_BK traffic
13/10/2012 08:43:24.000 kernel[0]: 2.106577: Use hw queue 2 for WME_AC_VI traffic
13/10/2012 08:43:24.000 kernel[0]: 2.106584: Use hw queue 3 for WME_AC_VO traffic
13/10/2012 08:43:24.000 kernel[0]: 2.106590: Use hw queue 8 for CAB traffic
13/10/2012 08:43:24.000 kernel[0]: 2.106596: Use hw queue 9 for beacons
13/10/2012 08:43:24.000 kernel[0]: 2.106687: wlan_vap_create : enter. devhandle=0x52b5d658, opmode=IEEE80211_M_STA, flags=0x1
13/10/2012 08:43:24.000 kernel[0]: 2.106740: wlan_vap_create : exit. devhandle=0x52b5d658, opmode=IEEE80211_M_STA, flags=0x1.
13/10/2012 08:43:24.000 kernel[0]: 2.106846: start[1012] sc->sc_inuse_cnt is at offset: 203c, sizeof(_sc->sc_ic) is 25f0
13/10/2012 08:43:24.000 kernel[0]: jnl: unknown-dev: journal replay done.
13/10/2012 08:43:24.000 kernel[0]: Kernel is LP64
13/10/2012 08:43:24.000 kernel[0]: hfs: Removed 12 orphaned / unlinked files and 147 directories
13/10/2012 08:43:24.000 kernel[0]: USBMSC Identifier (non-unique): 5743415A4130363339303938 0x1058 0x1110 0x2010
13/10/2012 08:43:24.000 kernel[0]: SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x05, ASC = 0x24, ASCQ = 0x00
13/10/2012 08:43:24.000 kernel[0]: SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x05, ASC = 0x24, ASCQ = 0x00
13/10/2012 08:43:16.254 com.apple.launchd[1]: *** launchd[1] has started up. ***
13/10/2012 08:43:24.000 kernel[0]: SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x05, ASC = 0x24, ASCQ = 0x00
13/10/2012 08:43:24.000 kernel[0]: SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x05, ASC = 0x24, ASCQ = 0x00
13/10/2012 08:43:24.000 kernel[0]: SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x05, ASC = 0x24, ASCQ = 0x00
13/10/2012 08:43:16.254 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
13/10/2012 08:43:24.033 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
13/10/2012 08:43:24.000 kernel[0]: BCM5701Enet: Ethernet address c8:bc:c8:89:f0:b4
13/10/2012 08:43:24.000 kernel[0]: AirPort_AtherosNewma40: Ethernet address d8:30:62:66:42:55
13/10/2012 08:43:24.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13/10/2012 08:43:24.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
13/10/2012 08:43:26.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
13/10/2012 08:43:26.000 kernel[0]: IOBluetoothUSBDFU::probe
13/10/2012 08:43:26.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
13/10/2012 08:43:26.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
13/10/2012 08:43:26.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
13/10/2012 08:43:26.000 kernel[0]: Previous Shutdown Cause: 3
13/10/2012 08:43:26.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
13/10/2012 08:43:26.000 kernel[0]: ** Device in slot: SLOT--1 **
13/10/2012 08:43:26.377 com.apple.SecurityServer[15]: Session 100000 created
13/10/2012 08:43:26.000 kernel[0]: DSMOS has arrived
13/10/2012 08:43:30.299 kdc[58]: label: default
13/10/2012 08:43:30.299 kdc[58]:     dbname: od:/Local/Default
13/10/2012 08:43:30.299 kdc[58]:     mkey_file: /var/db/krb5kdc/m-key
13/10/2012 08:43:30.299 kdc[58]:     acl_file: /var/db/krb5kdc/kadmind.acl
13/10/2012 08:43:30.698 hidd[60]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
13/10/2012 08:43:30.699 hidd[60]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
13/10/2012 08:43:30.891 com.apple.usbmuxd[40]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13/10/2012 08:43:31.083 fseventsd[61]: event logs in /.fseventsd out of sync with volume. destroying old logs. (44956 18 45023)
13/10/2012 08:43:31.083 fseventsd[61]: log dir: /.fseventsd getting new uuid: 6782B698-49C7-4BF9-9CB5-F34624769054
13/10/2012 08:43:31.237 appleeventsd[66]: main: Starting up
13/10/2012 08:43:31.886 airportd[82]: _processDLILEvent: en1 attached (down)
13/10/2012 08:43:31.908 mDNSResponder[52]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
13/10/2012 08:43:32.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff8034b9b000
13/10/2012 08:43:32.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
13/10/2012 08:43:33.000 kernel[0]: macx_swapon SUCCESS
13/10/2012 08:43:33.394 coreservicesd[83]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
13/10/2012 08:43:34.248 configd[18]: setting hostname to "G-iMac-4.local"
13/10/2012 08:43:34.000 kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
13/10/2012 08:43:34.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
13/10/2012 08:43:34.256 configd[18]: network changed.
13/10/2012 08:43:34.423 mds[51]: (Normal) FMW: FMW 0 0
13/10/2012 08:43:35.224 com.apple.SecurityServer[15]: Entering service
13/10/2012 08:43:35.266 systemkeychain[87]: done file: /var/run/systemkeychaincheck.done
13/10/2012 08:43:35.287 mDNSResponder[52]: D2D_IPC: Loaded
13/10/2012 08:43:35.287 mDNSResponder[52]: D2DInitialize succeeded
13/10/2012 08:43:35.291 configd[18]: network changed: DNS*
13/10/2012 08:43:35.299 kdc[58]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
13/10/2012 08:43:35.353 UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
13/10/2012 08:43:35.436 awacsd[70]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
13/10/2012 08:43:35.440 awacsd[70]: InnerStore CopyAllZones: no info in Dynamic Store
13/10/2012 08:43:35.452 loginwindow[55]: Login Window Application Started
13/10/2012 08:43:35.878 netbiosd[91]: Unable to start NetBIOS name service:
13/10/2012 08:43:35.894 WindowServer[106]: Server is starting up
13/10/2012 08:43:35.898 WindowServer[106]: Session 256 retained (2 references)
13/10/2012 08:43:35.898 WindowServer[106]: Session 256 released (1 references)
13/10/2012 08:43:35.907 WindowServer[106]: Session 256 retained (2 references)
13/10/2012 08:43:35.908 WindowServer[106]: init_page_flip: page flip mode is on
13/10/2012 08:43:35.972 digest-service[113]: label: default
13/10/2012 08:43:35.972 digest-service[113]:     dbname: od:/Local/Default
13/10/2012 08:43:35.972 digest-service[113]:     mkey_file: /var/db/krb5kdc/m-key
13/10/2012 08:43:35.973 digest-service[113]:     acl_file: /var/db/krb5kdc/kadmind.acl
13/10/2012 08:43:35.975 digest-service[113]: digest-request: uid=0
13/10/2012 08:43:35.993 rpcsvchost[120]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
13/10/2012 08:43:35.995 digest-service[113]: digest-request: init request
13/10/2012 08:43:35.999 digest-service[113]: digest-request: init return domain: BUILTIN server: GRAHAM-FLETCHERS-IMAC-4
13/10/2012 08:43:36.008 aosnotifyd[117]: bootstrap_look_up failed (44e)
13/10/2012 08:43:36.000 kernel[0]: 22.627194: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
13/10/2012 08:43:36.000 kernel[0]: 22.627221: switchVap from 1 to 1
13/10/2012 08:43:36.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,c5e1,3800]
13/10/2012 08:43:37.319 WindowServer[106]: mux_initialize: Couldn't find any matches
13/10/2012 08:43:37.325 kdc[58]: KDC started
13/10/2012 08:43:37.334 WindowServer[106]: GLCompositor enabled for tile size [256 x 256]
13/10/2012 08:43:37.334 WindowServer[106]: CGXGLInitMipMap: mip map mode is on
13/10/2012 08:43:37.347 WindowServer[106]: WSMachineUsesNewStyleMirroring: false
13/10/2012 08:43:37.348 WindowServer[106]: Display 0x04273740: GL mask 0x1; bounds (0, 0)[1920 x 1080], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cdd, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cdd0000000004273740
13/10/2012 08:43:37.348 WindowServer[106]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/2012 08:43:37.353 WindowServer[106]: Created shield window 0x5 for display 0x04273740
13/10/2012 08:43:37.353 WindowServer[106]: Created shield window 0x6 for display 0x003f003d
13/10/2012 08:43:37.354 WindowServer[106]: Display 0x04273740: GL mask 0x1; bounds (0, 0)[1920 x 1080], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cdd, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cdd0000000004273740
13/10/2012 08:43:37.354 WindowServer[106]: Display 0x003f003d: GL mask 0x2; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/2012 08:43:37.354 WindowServer[106]: CGXPerformInitialDisplayConfiguration
13/10/2012 08:43:37.354 WindowServer[106]:   Display 0x04273740: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cdd S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
13/10/2012 08:43:37.354 WindowServer[106]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
13/10/2012 08:43:37.378 WindowServer[106]: GLCompositor: GL renderer id 0x01021a08, GL mask 0x00000003, accelerator 0x00003b3b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
13/10/2012 08:43:37.378 WindowServer[106]: GLCompositor: GL renderer id 0x01021a08, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
13/10/2012 08:43:37.382 loginwindow[55]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13/10/2012 08:43:37.841 locationd[56]: NOTICE,Location icon should now be in state 0
13/10/2012 08:43:37.841 locationd[56]: locationd was started after an unclean shutdown
13/10/2012 08:43:38.016 WindowServer[106]: Created shield window 0x7 for display 0x04273740
13/10/2012 08:43:38.017 WindowServer[106]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
13/10/2012 08:43:39.144 launchctl[132]: com.apple.findmymacmessenger: Already loaded
13/10/2012 08:43:39.164 com.apple.SecurityServer[15]: Session 100003 created
13/10/2012 08:43:39.354 WindowServer[106]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
13/10/2012 08:43:39.383 WindowServer[106]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
13/10/2012 08:43:39.404 WindowServer[106]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
13/10/2012 08:43:40.502 coreaudiod[142]: 2012-10-13 08:43:40.500848 AM [AirPlay] Started browsing for _airplay._tcp.
13/10/2012 08:43:40.503 coreaudiod[142]: 2012-10-13 08:43:40.502664 AM [AirPlay] Started browsing for _raop._tcp.
13/10/2012 08:43:40.520 loginwindow[55]: Login Window Started Security Agent
13/10/2012 08:43:40.596 SecurityAgent[147]: This is the first run
13/10/2012 08:43:40.597 SecurityAgent[147]: MacBuddy was run = 0
13/10/2012 08:43:40.000 kernel[0]: hfs: early journal init: volume on disk1s2 is read-only and journal is dirty. Can not mount volume.
13/10/2012 08:43:40.000 kernel[0]: hfs_mountfs: hfs_early_journal_init failed, erroring out
13/10/2012 08:43:40.000 kernel[0]: hfs_mount: hfs_mountfs returned 22
13/10/2012 08:43:41.000 kernel[0]: hfs: early journal init: volume on disk1s4 is read-only and journal is dirty. Can not mount volume.
13/10/2012 08:43:41.000 kernel[0]: hfs_mountfs: hfs_early_journal_init failed, erroring out
13/10/2012 08:43:41.000 kernel[0]: hfs_mount: hfs_mountfs returned 22
13/10/2012 08:43:41.117 configd[18]: network changed: v4(en0+:10.0.1.6) DNS+ Proxy+ SMB
13/10/2012 08:43:41.559 ntpd[109]: proto: precision = 1.000 usec
13/10/2012 08:43:41.624 UserEventAgent[137]: cannot find useragent 1102
13/10/2012 08:43:41.000 kernel[0]: hfs: early journal init: volume on disk1s3 is read-only and journal is dirty. Can not mount volume.
13/10/2012 08:43:41.000 kernel[0]: hfs_mountfs: hfs_early_journal_init failed, erroring out
13/10/2012 08:43:41.000 kernel[0]: hfs_mount: hfs_mountfs returned 22
13/10/2012 08:43:41.000 kernel[0]: jnl: disk1s2: replay_journal: from: 3384832 to: 4262400 (joffset 0x3a33000)
13/10/2012 08:43:41.000 kernel[0]: [ffffff80363dc400][BNBMouseDevice::init][75.15] init is complete
13/10/2012 08:43:41.000 kernel[0]: [ffffff80363dc400][BNBMouseDevice::handleStart][75.15] returning 1
13/10/2012 08:43:41.000 kernel[0]: [ffffff80364a5200][AppleMultitouchHIDEventDriver::start] entered
13/10/2012 08:43:41.000 kernel[0]: jnl: disk1s2: journal replay done.
13/10/2012 08:43:41.719 fseventsd[61]: event logs in /Volumes/2 TB External HD/.fseventsd out of sync with volume. destroying old logs. (44725 0 44862)
13/10/2012 08:43:41.722 com.apple.launchd[1]: (com.apple.xprotectupdater[38]) Exited with code: 252
13/10/2012 08:43:41.724 fseventsd[61]: log dir: /Volumes/2 TB External HD/.fseventsd getting new uuid: DCC06C5E-5183-45AF-81EE-BB362265032A
13/10/2012 08:43:41.731 fseventsd[61]: Events arrived for /Volumes/2 TB External HD after an unmount request! Re-initializing.
13/10/2012 08:43:41.731 fseventsd[61]: creating a dls for /Volumes/2 TB External HD but it already has one...
13/10/2012 08:43:42.098 fseventsd[61]: event logs in /Volumes/Ext HD Document Backup/.fseventsd out of sync with volume. destroying old logs. (44725 1 44863)
13/10/2012 08:43:42.176 fseventsd[61]: log dir: /Volumes/Ext HD Document Backup/.fseventsd getting new uuid: 6507260D-5821-4CE0-B15D-EC0E5824A9E7
13/10/2012 08:43:42.000 kernel[0]: [ffffff8036396800][AppleMultitouchDevice::start] entered
13/10/2012 08:43:42.000 kernel[0]: jnl: disk1s4: replay_journal: from: 17646080 to: 18217984 (joffset 0xe71000)
13/10/2012 08:43:42.000 kernel[0]: jnl: disk1s4: journal replay done.
13/10/2012 08:43:42.000 kernel[0]: jnl: disk1s3: replay_journal: from: 11460608 to: 13861888 (joffset 0x1d1a000)
13/10/2012 08:43:42.192 fseventsd[61]: Events arrived for /Volumes/Ext HD Document Backup after an unmount request! Re-initializing.
13/10/2012 08:43:42.192 fseventsd[61]: creating a dls for /Volumes/Ext HD Document Backup but it already has one...
13/10/2012 08:43:42.534 BezelServices 235.55[55]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
13/10/2012 08:43:46.107 fseventsd[61]: event logs in /Volumes/Backup Time Machine/.fseventsd out of sync with volume. destroying old logs. (44867 4 44867)
13/10/2012 08:43:46.000 kernel[0]: jnl: disk1s3: journal replay done.
13/10/2012 08:43:46.000 kernel[0]: hfs: Removed 0 orphaned / unlinked files and 6 directories
13/10/2012 08:43:46.125 fseventsd[61]: log dir: /Volumes/Backup Time Machine/.fseventsd getting new uuid: 252EBAC6-E581-40C6-BBDE-3B8463177B97
13/10/2012 08:43:46.128 fseventsd[61]: Events arrived for /Volumes/Backup Time Machine after an unmount request! Re-initializing.
13/10/2012 08:43:46.128 fseventsd[61]: creating a dls for /Volumes/Backup Time Machine but it already has one...
13/10/2012 08:43:49.289 SecurityAgent[147]: User info context values set for
13/10/2012 08:43:49.666 SecurityAgent[147]: Login Window login proceeding
13/10/2012 08:43:50.605 awacsd[70]: Exiting
13/10/2012 08:43:50.000 kernel[0]: jnl: disk3s2: replay_journal: from: 54873600 to: 56486400 (joffset 0x1d1a000)
13/10/2012 08:43:51.554 fseventsd[61]: event logs in /Users/g/.fseventsd out of sync with volume. destroying old logs. (44859 1 44859)
13/10/2012 08:43:51.000 kernel[0]: jnl: disk3s2: journal replay done.
13/10/2012 08:43:51.000 kernel[0]: hfs: Removed 0 orphaned / unlinked files and 7 directories
13/10/2012 08:43:51.629 fseventsd[61]: log dir: /Users//.fseventsd getting new uuid: 01382ACA-E38C-40EA-BD5F-96BF7C4C8728
13/10/2012 08:43:51.654 fseventsd[61]: disk logger: failed to open output file /Volumes/2 TB External HD/.fseventsd/0000000000000396 (No such file or directory). mount point /Volumes/2 TB External HD/.fseventsd
13/10/2012 08:43:51.655 fseventsd[61]: disk logger: failed to open output file /Volumes/2 TB External HD/.fseventsd/0000000000000396 (No such file or directory). mount point /Volumes/2 TB External HD/.fseventsd
13/10/2012 08:43:51.655 fseventsd[61]: disk logger: failed to open output file /Volumes/Ext HD Document Backup/.fseventsd/0000000000000406 (No such file or directory). mount point /Volumes/Ext HD Document Backup/.fseventsd
13/10/2012 08:43:51.655 fseventsd[61]: disk logger: failed to open output file /Volumes/Ext HD Document Backup/.fseventsd/0000000000000406 (No such file or directory). mount point /Volumes/Ext HD Document Backup/.fseventsd
13/10/2012 08:43:51.656 fseventsd[61]: disk logger: failed to open output file /Volumes/Backup Time Machine/.fseventsd/000000000000058c (No such file or directory). mount point /Volumes/Backup Time Machine/.fseventsd
13/10/2012 08:43:51.656 fseventsd[61]: disk logger: failed to open output file /Volumes/Backup Time Machine/.fseventsd/000000000000058c (No such file or directory). mount point /Volumes/Backup Time Machine/.fseventsd
13/10/2012 08:43:52.841 loginwindow[55]: Login Window - Returned from Security Agent
13/10/2012 08:43:52.883 loginwindow[55]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
13/10/2012 08:43:52.938 loginwindow[55]: USER_PROCESS: 55 console
13/10/2012 08:43:54.354 com.apple.launchd.peruser.501[205]: (com.divx.agent.postinstall) Unknown key: LimitToSessionType
13/10/2012 08:43:54.354 com.apple.launchd.peruser.501[205]: (com.apple.gamed) Ignored this key: UserName
13/10/2012 08:43:54.354 com.apple.launchd.peruser.501[205]: (com.apple.gamed) Ignored this key: GroupName
13/10/2012 08:43:54.355 com.apple.launchd.peruser.501[205]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
13/10/2012 08:43:54.360 loginwindow[55]: Connection with distnoted server was invalidated
13/10/2012 08:43:55.827 distnoted[209]: # distnote server agent absolute time: 42.878702082   civil time: Sat Oct 13 08:43:55 2012   pid: 209 uid: 501 root: no
13/10/2012 08:43:57.522 blued[69]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
13/10/2012 08:43:58.492 com.apple.SecurityServer[15]: Session 100005 created
13/10/2012 08:43:59.932 WindowServer[106]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
13/10/2012 08:44:00.190 WindowServer[106]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
13/10/2012 08:44:01.365 KernelEventAgent[57]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
13/10/2012 08:44:01.000 kernel[0]: HFS: Vol: WD SmartWare Very Low Disk: freeblks: 0, dangerlimit: 1342
13/10/2012 08:44:04.018 com.apple.launchd.peruser.501[205]: (com.apple.afpstat-qfa[276]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
13/10/2012 08:44:04.018 com.apple.launchd.peruser.501[205]: (com.apple.afpstat-qfa[276]) Job failed to exec(3) for weird reason: 2
13/10/2012 08:44:04.061 com.apple.launchd.peruser.501[205]: ([email protected][280]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
13/10/2012 08:44:04.061 com.apple.launchd.peruser.501[205]: ([email protected][280]) Job failed to exec(3) for weird reason: 2
13/10/2012 08:44:04.583 talagent[232]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
13/10/2012 08:44:04.585 talagent[232]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
13/10/2012 08:44:04.588 coreservicesd[83]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=139
13/10/2012 08:44:04.600 com.apple.launchd.peruser.501[205]: (com.apple.mrt.uiagent[266]) Exited with code: 255
13/10/2012 08:44:04.968 NetworkBrowserAgent[288]: Starting NetworkBrowserAgent
13/10/2012 08:44:05.797 WindowServer[106]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
13/10/2012 08:44:05.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=278[GoogleSoftwareUp] clearing CS_VALID
13/10/2012 08:44:06.261 WindowServer[106]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.46 seconds (server forcibly re-enabled them after 1.00 seconds)
13/10/2012 08:44:07.534 apsd[256]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
13/10/2012 08:44:08.707 StatusMenu[285]: Attempting to monitor /Library/Application Support/WDSmartWare
13/10/2012 08:44:08.707 StatusMenu[285]: Monitoring /Library/Application Support/WDSmartWare
13/10/2012 08:44:08.707 StatusMenu[285]: /Library/Application Support/WDSmartWare/WDDMStatus.plist exists
13/10/2012 08:44:08.708 StatusMenu[285]: Attempting to monitor /Library/Application Support/WDSmartWare/WDDMStatus.plist
13/10/2012 08:44:08.708 StatusMenu[285]: Monitoring /Library/Application Support/WDSmartWare/WDDMStatus.plist
13/10/2012 08:44:08.709 StatusMenu[285]: The number of drives attached is: 1
13/10/2012 08:44:08.709 StatusMenu[285]: Display the status menu.
13/10/2012 08:44:09.245 coreservicesd[83]: Can't change an application into stopped state for app App:"Finder" [ 0x0/0x12012] @ 0x0x7fbc8c23f0a0 because it's already been started.
13/10/2012 08:44:22.986 CalendarAgent[259]: *** -[IADomainCache init]: IA domains cache is out of date.
13/10/2012 08:44:29.357 com.apple.launchd.peruser.501[205]: (com.trusteer.rapport.rapportd[277]) Job appears to have crashed: Bus error: 10
13/10/2012 08:44:30.669 ReportCrash[312]: Saved crash report for rapportd[277] version ??? to /Users/grahamfletcher/Library/Logs/DiagnosticReports/rapportd_2012-10-13-084429 _G-iMac-4.crash
13/10/2012 08:44:34.607 imagent[269]: [Warning] [AIM] Could not change my statusURL to
13/10/2012 08:44:43.007 Dock[281]: no information back from LS about running process
13/10/2012 08:44:56.305 com.apple.SecurityServer[15]: Session 100008 created

Very loud fan sound after sleep when Ram is upgraded.

Recently I have upgrade the Ram memory from 1Gb to 5Gb with (2x2GB) FB-DIMM DDR2 667MHz from Ondamatica. Memory works perfectly, hardware tests were OK and i didn't notice any issue except one: after sleep, fans start to spin faster and faster (seems like a vacuum) to what I supose Is the fastest speed they support, during arround a minute or 45 seconds. That generates an intense noise but happens only when awake afer sleep, not when restarting.
I've done almost everything: reset pvram, reset SMC, change memory slots... And the issue only stops when I remove the new two Ram modules.
I've read about it in some forums, but no one solved it. ¿Any suggestion before I return the Ram to the store?. Could be a software problem?.

It will or can happen but you can reduce it somewhat maybe using SmcFanControl (2.1.3.1 - wwww.macupdate.com ) to keep the fans above default by 200 rpm. And run Hardware Monitor to monitor temps as well. They may be running much warmer than they could/should/ought to.
1GB and your system was on starvation express! ouch. 4GB is more of a normal minimum even. 4 x 1GB is nice balanced setup. 2GB DIMMs might be warmer, run 70C perhaps. And they use about 15W each.

No sound after sleep

I have the latest MacBook Pro, 17 inch.
After putting the MacBook to sleep, I lose the sound to applications like iChat and Mail. I don't know how to get it back other than restarting the computer.
Suggestions anyone?

ok....
try resetting PRAM
if that does not work go about resetting PMU/SMC/SMU
check your settings in sound preference in system preference after your sleep thing....if that too doesn't work....man you should try out the archive install technique probably some system software has got corrupted .DO BACKUP YOUR DATA BEFORE ATTEMPTING ARCHIVE AND INSTALL EVENTHOUGH YOUR DATA REMAINS INTACT BUT THERE IS NO GUARANTEE .. Best Of Luck!!!!

T520 loses sound after sleep

Hello,
I recently bought a T520 and am having issues with the sound. When the computer goes into sleep, then is resumed I lose output from the sound card. When I check the sound properties in the control panel everything looks OK, but no sound is heard through the speakers. The volume is at around half.
Soundcard: Conexant 20672 SmartAudio HD
Soundcard drivers version: 8.32.18.0
This is the latest version according to Lenovo System Update.
Disabling and enabling the device in Device Manager doesn't help.
Any ideas?
Solved!
Go to Solution.

@benc,
Latest driver for the T520 should be 8.32.23.0.
Try updating it and see if it helps.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-76999
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this?

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --

Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

Pismo Sound Problems after Sleep in Tiger

Hi all. New to the forums and returning to Macs after years of cursing Bill Gates. Picked up a Powerbook Pismo from a friend and have been having some fun with it, but I have one problem I can't solve. I replaced the hard drive (saved the old one) and installed Tiger and 1GB of memory on the machine. All seemed well until I noticed that the sound would not work sometimes after sleeping. The sound will usually return with a reboot, but sometimes I'll have to actually turn the machine off, and clear the PRAM to get the sound to come back. Sometimes, the volume and screen controls will both not work at all (pop up doesn't even appear when the keys are pressed), sometimes it's just that the sound doesn't work, but everything looks right on the screen. I've also had the sound and screen buttons not work only to have pop ups suddenly appear and the adjustments happen several minutes after I pressed the keys. So far I've tried:
Clearing the PRAM
Checked the Pram Battery (ok)
Reinstalled Tiger (Still loses sound)
Downgraded to 10.3 (problem persists, and seems worse)
In system information on Tiger it says "there was an error when retrieving that information" when you click on the sound hardware.
The machine is a 500mhz Pismo with a 48gig drive and 1 gig of Memory (133mhz, would that cause this sort of problem?)
I have not tried going back to OS9 to see if the disappearing sound resolves as I don't currently have an OS9 disk.
This sure seems like a software problem, but I'm starting to wonder. I really like this machine and want to get it to work! Help!

Maxstang, welcome to Apple Discussions.
Did you repair permissions after you installed Tiger? Have you updated Tiger to 10.4.11?
Here's the Sound troubleshooting info in the Pismo Service Manual.
No sound from speaker(s)
1. Verify mute mode is not enabled (F6 on the keyboard).
2. Check the volume setting in the Sound control panel.
3. Verify no external speakers or headphones are plugged in.
4. Reset PRAM.
5. Make sure speaker cable is plugged into sound card.
6. Replace sound card.
7. Replace speakers (part of the top case).
8. Replace I/O logic board
Startup sound is heard, then no sound from speaker(s)
1. Remove sound preferences from System Folder, reset PRAM,
then restart.
2. Perform clean installation of system software.
Had the Pismo previously had OS X installed. There's a firmware update (Boot ROM version 4.1.8) that should be installed prior to installing OS X. However, when I got my Pismo with Tiger installed, the firmware was not updated (have since updated). However, I don't think this could be the cause of your problem, since I had no sound problems when the update was not installed.
The PC133 RAM (which runs at 100MHz) should not be the problem. I have PC133 RAM in my Pismo.
Since you replaced the HD, could you have disturbed the connection to the Sound Card. The Sound Card is located to the upper-right of the HD. Here's a helpful laptop site.
Fix It Guides for Mac Laptops & Mini
http://www.ifixit.com/Guide/
The guides can be viewed on-line or you can download a PDF file.
 Cheers, Tom
(='.'=)
(")_(")

Can't fetch mail after sleep

I have a really annoying problem with an iMac and can't just figure out what's wrong:
Since mid December this iMac (model 11,1: 2.66Ghz core i5/OS 10.6.5) has been dropping the network connections when it's waken up from sleep mode.
If you try to hit the "Get mail" button after that, Mail tells +"the connection to the server 'nnn' on port 995 timed out."+
It doesn't matter if youre using port 995 or 110, they both are allowed on the server we're using and there's no problems with the rest of the Macs in our office with similar Mail and Network configurations.
And the computer drops the connection to our file server at the same time as well. The OS is up-to-date.

I have exactly the same problem on Snow Leopard with Mail 4.5 except re-booting doesn't work. even re-installing Mail has made no difference.

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

ICloud mail does not reconnect in Mail application on MacBook Pro after disconnecting and reconnecting iPhone or after sleep

iCloud mail does not reconnect in Mail on my MacBook Pro after sleep or after disconnecting and reconnecting my iPhone. This only happens when I use my iPhone as a 3G-modem and not when I am on Wi-Fi. The only solution seems to be to quit the Mail-application and restart it again. Then Mail reconnects to iCloud.

Hi horstp,
Given your description of the issue (works on other Macs), it may be worth trying to set up that account by itself in a new test user on the iMac to see if it can be isolated to a user-specific file. You may find the following article helpful:
Apple Support: Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Regards,
- Brenden

Loss of sound after waking up from sleep

I am currently using OS X 10.8.5 (12F37). After upgrading iTunes to 11.1 (126) I lose sound after the computer wakes up from sleep. This was not a problem prior to the iTunes upgrade. The only way to correct the problem is to restart or shut down then restart the computer. Are there any other solutions to this event?

This is not just a Mac Mini problem. I've found comments from people with all kinds of Mac, with any kind of external sound device, who all have this same issue.
The common factor is Mountain Lion.
Apparently there is a new build (12F42) which is supposed to fix this.
http://www.gadgetguide4u.com/new-os-x-1085-build-number-12f42.html
Apple released it to their employees on the 25th Sept.
Yet they don't even seem to have told their support people about it. My local apple store replaced my Mac Mini just on Sunday, because they didn't know why it was behaving like that. Needless to say, the new one has the same problem.
Here's hoping that build is available soon ...

Mail sound after sleep

Similar Messages

Maybe you are looking for