Mail sounds no longer working

After upgrading to Mountain Lion, the Mail app (6.0) no longer makes sounds for checking, sending, or receiving email messages.  Sounds are enabled in both Mail preferences as well as the mail section of Notifications.  Sounds elsewhere still work, just not in Mail.  Any thoughts?
I've already searched for, and found, the various threads about activities Mail being curtailed (no spinning wheels for example).  I can think of no good reason to remove visual/audio feedback from an application (or make it configurable).

Certainly.  This is something that has been around in Mac's for a very long time, but this Apple KB will tell you what to do.  Very simple:
http://support.apple.com/kb/PH4405
I've found since my post that I still occasionally lose sound, but quitting and restarting the Mail app has been sufficient; no need to reset the PRAM anymore.

Similar Messages

  • Mail Sounds No Longer Work on iPhone 4.

    The sounds for mail, incoming or outgoing, no longer work on my iPhone 4 (4.3.3).  All it does is vibrate even though that is set to Off.   All the other feature settings are set to ON. I have checked all the sounds and they work, they just don't work with the Mail any more.  This is a MobileMe IMAP account.  I tried re-setting everything without deleting data and that made no difference.  The sounds worked perfectly up until a week or so ago.  Any ideas on how to have them function again?  In addition, when I connect the iPhone to my iMac (Snow Leopard 10.6.7) the phone also vibrates.  This is a new feature as well.  Any chance a setting in iTunes might have caused this, and, if so, how to remedy it.
    Thanks!

    Problem solved.  No further action.

  • HT204266 The sound no longer works on my ipad?

    The sound no longer works on my iPad although when I put headphones in it does. When I press the volume button it comes up as "sound effects" but with no dots that would normally go up or down. When I double click the start button there is the normal volume bit but no button to move up or down. Has anyone ever had this before?

    The disappearing sound is typically one of three things that could be going on. Read this and see which one applies to your situation.
    1. If you have no sound at all, even in the Music App, try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

  • Mail App no longer working after 2.0 upgrade

    I upgraded to 2.0 on my IPhone Edge and now my mail application no longer works AT ALL. If I try to open it, it simply shows me a blank mail screen, waits for a few seconds and then returns to the home screen. Strangely enough, I have been able to send email photos using the camera application.
    Email is the most important application for me on the iPhone! Has anyone encountered this problem? Is there a fix available?

    I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

  • Sound no longer working after graphics card installation

    Okay, so my problem is:
    I recently added a graphics card to my windows 8.1 PC. The card itself works fine (a GTX 750Ti), but since installing it my sound no longer works from either port. Things I have already tried:
    Rebooting (obviously)
    Taking the card out and then replacing it
    Going through all the control panel audio settings (more on this later)
    Disabling the HDMI audio on the card
    Trying different (provably working) speakers and headphones
    Updating/installing drivers (not that you need them for headphones)
    The "playback devices" screen declared that nothing whatsoever is plugged in (it is). I'm concerned I might have damaged something during installation, but nothing seems obviously damaged, and I would have expected static to either do no damage
    or wipe out the entire motherboard. The back port is working, so it isn't the cable. My monitor output is HDMI (with no speakers on the monitor), if that makes any difference.
    Penny for anyone's thoughts?

    The back port is working, so it isn't the cable.
    I’m confused as to what this means. If you have audio via the ports on the back of the computer but not in front ports you may have damaged the front audio cable or connection on the motherboard
    or at the front ports. Find the HD Audio (or AC’97) port on your motherboard and verify that the cable is connected and intact, then follow this cable forward to your front audio ports. If you stressed this cable by tugging or pushing, it could have damaged
    the connection to the front ports. Sometimes these ports are connected by a header like the motherboard and this connection could have come loose.
    Brandon
    Windows Outreach Team- IT Pro
    Windows for IT Pros on TechNet

  • The sound no longer works in my husband's iPad and it keeps shutting itself down. This started today. We checked all the settings and everything looks right. Is there something we might be missing?

    The sound no longer works in my husband's iPad and it keeps shutting itself down. This started today. We checked all the settings and everything looks right. Is there something we might be missing?

    Try a reset first: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
    If the reset doesn't fix it, try a restore:
    http://support.apple.com/kb/HT1414

  • My sound no longer works, my sound no longer works

    Since i downloaded new OS my sound no longer works, this if for itunes, spotify and trying to listen to youtube videos

    I just found out that a few of my slideshows have the music intact.  For the rest, it looks like I will have to go through the cumbersome process of re-loading the music.
    I can't tell is this was caused by the Mavericks upgrade or Iphoto Update.

  • My sound no longer works on my Apple 5c cell phone.  What should the settings be?

    My sound no longer works on my phone.  What should the settings be?

    What do you by "what should the settings be?  Volume is either up or down.

  • Sound no longer works after upgrade to Windows 8.1

    System:
    Operating System
    Windows 8.1 64-bit
    CPU
    Intel Core i5 3330 @ 3.00GHz
    23 °C
    Ivy Bridge 22nm Technology
    RAM
    8.00GB Dual-Channel DDR3 (11-11-11-28)
    Motherboard
    LENOVO MAHOBAY (SOCKET 0)
    18 °C
    Audio
    ASUS Xonar DGX Audio Device
    I sucessfully upgrading to Windows 8.1 and everything was functioning after the upgrade.  However, after the first time I restarted my system after the upgrade the intergrated soundcard no longer worked.
    I attempted to remove and reinstall the RealTek audio driver, downloading the newest 8.1 compatible driver from the Lenovo support site.
    The drive refused to installed, either via the executable or by manually installing the driver through a device manager upgrade.  
    So I attempted to install a stand alone soundcard, to no success.   
    In device manager this is displayed for both the integrated motherboard audio and the new Asus sound card:
    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code
    52)
    If I disable the driver driver signature enforcement, neither audio option works.  Instead I get this error in device manager:
    "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.
    (Code 39)"
    Attempting to update the driver in device manager, Windows tell me I am on the most up-to-date, recommended driver, yet at the same time refuses to
    allow it to function.
    Extremely frustrating.
    Any help would be greatly appreciated.

    I have also attempted to clear out the registry Upper/Lower Filters to no success.
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}
    At that registry key, in the right window, is there, under "Name", either an UpperFilters orLowerFilters value?
    If so, for each of the UpperFilters and/or LowerFilters value, what is listed under "Data"?
    There could be an improper entry at one of these values which may be causing the problem.

  • Mail Rules no longer working

    Recently (after the iCloud) my mail is full of garbage that had previously had rules applied. The rules are no longer working, even if applied manually. If anyone is having this problem or know of a solution please advise. Thank you in advance.

    I just had the same problem after installing MtLion a few days ago. Went to Mail > Perferences > Accounts > Rules and rechecked the box for the Rules I had setup before the Upgrade/Update. 

  • Mail rules no longer work.

    Having trouble with Mail rules that I have used in the past - they no longer work. Any ideas? Running 10.4.10

    Yes, the same thing has happened to me.
    But I'd like to avoid having to set up the the rules again (if I trashing the com.apple.mail.plist. I have a lot of rules, and it would take some time to set them up again. Does anyone know of other options?

  • Sounds no longer working on iPhone 4

    Hello,
    So a few days ago I dropped my iPhone 4. I'm not 100% sure but I think that is when my sound stopped working. The speakers are working fine, I can hear music and things like that. None of the phone sounds such as clicking when lock/unlocked, keyboard clicks etc are working. When I press the + and - volume buttons the icon does not appear, same as when i mute/unmute it. No sounds, nothing appears. Also, when I receive incoming calls the ringer no longer works.
    I have tried cleaning with toothbrush, restarting, restoring, blowing in the phone, etc.
    Any help or advice would be greatly appreciated.
    I do not have insurance on my phone (I know, I know) but I was in the process of buying a house and moving when they did the switch from mobileprotect to att&t so I apparently missed it and it was too late :/

    I have no doubt that this is a hardware issue, probably caused by the drop as you said. By restarting and restoring without success, you have basically ruled out a software issue. All you can do now is pay $149 for an out-of-warranty replacement, or try to find one elsewhere for cheaper.

  • BEWARE....Sound No Longer Works Since 2.2 Update

    ....not sure what the heck is going on, but, since upgrading to v 2.2 tonight, my speaker no longer works. No music, no movies....I hope this lil sucka rings when I get a phone call. THAT would be really f 'd. I've checked my settings and everything looks fine. Any suggestions? Anyone else having this problem?

    when I flick my silent switch on no sound comes from applications like iSleep or any other music type apps
    This might be a new bug... Or it may be by design.
    Also if silent switch is off and music is playing, once the screen timesout (mine set to 1 min) then the music again cuts off!!!
    This has been reported on a number of threads, but it should not affect the iPod App that comes with the phone. Is that what you are seeing, or are these other app-store apps that are going silent.???
    (Those app-store apps may need an update from their vendors according to one post).

  • Sound no longer working in 10.5.2

    I've installed 10.5.2 on my PowerBook G4 15" 1.67GHz, and now, sound output no longer works. The "clicks" of the volume change don't work and neither does music playing in iTunes.
    Any ideas?

    Sorry - mistakenly assumed you would have tried that
    LN

  • Mail search using e-mail addresses not longer works after 10.6 update?

    I just updated to 10.6 from 10.5. I have also added all the software updates.
    The search function no longer works for e-mail addresses. I used to right-click on an address, copy and paste in search. Now, when I do that, it lists like this : NAME <[email protected]> (sample info) instead of just the e-mail address. In this new form, the search function no longer functions. Is there a way to revert to the old way mail copies e-mail address?
    I do not want to have to delet ethe name & out of each paste.
    input greatly appreciated!

    Perfect! Works like a charm.
    For others looking for the fix.
    In 10.6, it seems someone at Apple decided that Copy Address should really mean Copy Name And Address And Add Angle Brackets Around The Address, because that's exactly what happens when you use Copy Address in Snow Leopard's Mail app. Instead of getting [email protected] on the clipboard, you get Sue Sample <[email protected]>.
    Besides now having an incorrect name on the Copy Address contextual menu item (thought admittedly, the alternative is a bit lengthy), this behavior is incredibly irritating if you want only the email address on the clipboard. Thankfully, some engineer somewhere deep within Apple included a hidden preference to change this behavior -- and the fine folks at Mac Daddy World (the Ecamm Network blog site) dug deep and discovered this preference.
    To revert to the 10.5-style behavior in Mail, first quit Mail then enter this command in Terminal:
    defaults write com.apple.mail AddressesIncludeNameOnPasteboard -bool NO

Maybe you are looking for

  • Null reference

    hi guys..! plz can anyone explain the output of the code below... public class AQuestion public void method(Object o) System.out.println("Object Version"); public void method(String s) System.out.println("String Version"); public static void main(Str

  • Scenario: SAP  Tables Data to XML File

    Hi , I need to create a Xml file at inbound  by taking input as SAP Tables Data at outbound. What are adapters to be used at outbound and inbound interfaces. Please correct me if iam wrong. At outbound side iam taking jdbc adapter and at inbound side

  • Migration doubt (Very Urgent)

    Hi we migrated FR and Webanalysis reports and users from 7.x to 9.3.1, after migrating to 9.3.1 we deleted all migrated databases and some users and some Reports in 9.3.1,,,, will this effect old reoports version 7.x, bcoz after deleting users, repor

  • Remove variable from "Sequence of entry variables"

    Hi All, I removed a characteristic from the "free characteristic section", this characteristic has the following variable defined: -Type of variable: Characteristic value -Processing by: User Entry/Default Value -Variable represents: Selection option

  • Suggestions for Showcasing KN functionality vs. PPT

    Most of my and my company's presentation work is done in PowerPoint (it's largely client-dictated), but I'd like to throw Keynote into the mix whenever possible as another option. And I'd like to showcase Keynote's advantages over PowerPoint in terms