Mail still won't send messages.

Hi:
I see that mac.mail had a system-wide problem yesterday with sending mail for an hour, but I haven't been able to send mail since yesterday around 2 and still can't. I repeatedly get the timed-out on port 25 error message. I can receive email.
Is there anything I can do, you can do there?
Best,
Amy Sutherland

Hi Amy.
Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
.Mac: Server timeout alert message when sending email

Similar Messages

  • Mail app won't send messages out

    I am logged into gmail on my iPhone 4 mail app. I tried to reply to a message yesterday and it wouldn't work. The message sat in my outbox saying "unsent" because I needed to go to my mail account settings and enter a password. Well I went to settings, mail, account, and my password was stored there. I re-typed it anyway to see what would happen. I went back to the mail app, and the message still has not sent. But now I don't have an Outbox folder on the main page either! The only way I know it's still unsent is because when the app refreshes, it says 1 Unsent Message on the bottom of the screen.
    So my question is, what is going on, where did my outbox go, why did it tell me to enter a password, and most importantly, why won't my message send?!
    I was connected to wifi, if that makes a difference. And does it make a difference if it was a reply versus a new message? I just tried a test email, connected through 3G, and it says it sent.

    Something stuck in the cache? Try a reset. To reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt).

  • Mail sometimes won't send message

    I had this problem with Mavericks, and it persists with Yosemite, using Apple Mail in both cases.  Specifically: I compose a message, click on Send, and the message goes to the Outbox and just sits - it won't actually send.  I checked with my provider to make sure the settings were all correct, and they are.  Even weirder, when this is happening I'm able to send mail - same account - from my iPad.   I send and receive email several times a day, and it mostly works fine. THis problem happens, on average, maybe once a week or so.  Any help would be appreciated, thanks.

    Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • I recently updated to Mavericks and now all my e-mail accounts won't send

    I recently updated to Mavericks and now all my e-mail accounts won't send. They all receive ok but when I send I get a message "sender address rejected by server" and " Authentification required" The passwords are still intact

    Check the Mail settings for your account, especially the SMTP (outgoing) address, type of authentication, and entry of the proper email username and password. You can do this when you select the account then under the outgoing mail server use the dropdown menu to select the Edit option. Select your outgoing configuration in the list. Check the settings below, then click on the Advanced tab and check those settings.
    If all is OK, then I suggest your reinstall Mavericks:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • Why won't my iPad won't send messages?

    My iPad2 won't send message to person I just received from.  The send button is blue but not active. When I try to send to send a new message to another person their name is red marked with ! and the send button is gray. It won't accept any new name - alwayas in red with !.

    Figured it out. The iPad message box has two lines. The first says "Subject" in gray. If you type something into the "Subject" line, but don't type anything on the next line (which is for the message), the send button remains inactive. Try typing the message on the second line. Send button then becomes active.
    Now why couldn't Apple tell us that?

  • Não estou conseguindo enviar e-mail utilizando SMTP Email Send Message vi.

    Não estou conseguindo enviar e-mail utilizando SMTP Email Send Message vi. Uso a versão 8.6. Aparece a mensagem Error 66 occurred at TCP Read in NI_SMTPEmail.lvlibMTP Email TCP Read xTP Reply.vi:2->NI_SMTPEmail.lvlibMTP Email Command.vi:1->NI_SMTPEmail.lvlibMTP Email [QUIT].vi->NI_SMTPEmail.lvlibMTP Email Close Session.vi:3->NI_SMTPEmail.lvlibMTP Email Send Message Charset.vi:2->NI_SMTPEmail.lvlibMTP Email Send Message.vi:1->teste1.vi   
    Attachments:
    imagem.JPG ‏160 KB

    Bom dia Jean_ebrax,
    o VI SMTP Email Send Message não suporta servidores SMTP que requerem autenticação. Se você quiser continuar utilizando este VI, você pode utilizar um servidor SMTP Local para testar o seu código. O link abaixo é de um servidor free:
    http://www.softstack.com/freesmtp.html
    Para mais informações, consulte este link:
    http://digital.ni.com/public.nsf/allkb/57597451D40737058625729900589452?OpenDocument
    Agora caso você queira utilizar servidores autenticados, você pode utilizar a plataforma .Net da Microsoft. Abaixo segue um exemplo:
    https://decibel.ni.com/content/docs/DOC-2401
    Estou a disposição para quaisquer esclarecimento.
    Atenciosamente,
    Ricardo Ramos
    Engenheiro de Vendas - Sul
    National Instruments Brasil

  • My new iphone 4 receives mail but won't send it

    my new iphone 4 receves mail but won't send it..

    Depending on what account your using, you may need to enter a password for your outgoing mail server, same password as your incoming mail server - go back into the mail account and check.

  • My I phone 4 won't send messages

    Hi I have an iPhone 4 on iOS 6 and my carrier is Verizon, I'm having trouble with sending messages. For some reason it won't send messages , I also have a keyboard case thats bluetooth if it matters. It's starting to become really frustrating.

    Settings > Messages > MMS messaging > ON??
    If yes, contact your carrier.

  • IPhone won't send messages only to other iphnes

    I have turned the SMS button on but still can only send messages to other iPhone users

    When I was on orange I had to contact their customer service center and they had to unlock the ability for me to contact internationally. I suggest you contact orange customer service.

  • What is the mail domain used to send messages ?

    my anti-spam (Cisco Ironport)  locked mail used by Adobe. What is the mail domain used to send messages ?

    Cesarg50409568 what Adobe software or service is your inquiry in reference to?

  • Mail:  Still Trying to Send Old Message?

    Yesterday, I attempted to send Email with four attached files. Unfortunately, I didn't quite grasp just how huge those files were (a couple GB or so!) before I hit "send" the message. It was unable to send them, not too surprisingly.
    So, I deleted that message from the Outbox and created an archive of the huge files, and attempted t send that archive in a different, follow-up message.
    The problem is that Mail seems to be still attempting to send the original heyuuuge message. It seems to be queued up somewhere, and I can't seem to figure out where. It doesn't appear in "Drafts," in "Outbox," nor in "Sent," and I don't see the follow-up message with the ZIP archive attached either.
    This is MobileMe, if it matters. Probably doesn't matter though, since I'm still able to send from my iPhone, and from the MobileMe website.
    Previously, on the bottom left of the window, it showed a transmission rate of ~200KBps, suggesting that it is in fact sending it. Now I don't even see that, although, I do see the spinning thingie by "Sent," and a few other Email messages queued up behind it.
    After force-quitting Mail, I see the progress bar again, but it's showing a transfer rate of zero, and also six messages queued up. Hmmm...
    Any ideas how I can figure out where the message is queued up, and thus delete it? Is there perhaps some file somewhere with outbox content that I can delete in order to purge all outbox content?
    My immediate inclination would be to wait until it comes back again to say that it can't send the message, but since it's not showing the progress indicator anymore, I'm not sure whether it ever will come back. If so, it's certainly taking quite a while. Hmmm...

    Ah, never mind. Looks like the problem finally resolved itself. Not sure exactly how, but it seems OK now.

  • Mail won't send messages.

    Hello, all!
    So I am new to Mac and having a tiny bit of trouble with Mail. I can receive messages, Connection Doctor says the server is fine, but nothing goes out. I called my ISP as it is their e-mail but I can log into the webmail and send/receive from Outlook when forced to. I guess that proves it isn't the server.
    So, I am wondering if there is an update that corrects this problem. I went through the troubleshooting guides to no avail.
    Thank you in advance for any help you can offer. The messages I receive are below.
    SadrianaZea
    From Mail:
    The sender address [email protected] was rejected by the server smtp-server.roadrunner.com.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be delivered.
    From Connection Doctor:
    Mail was able to connect to the internet.
    Roadrunner Connection and login to server succeeded.
    smtp-server.roadrunner.com ; Connection to server succeeded, no login required.
    (There were no details.)

    I figured out 2 things to fix my 2 problems:
    first, I deleted both POP accounts in the prefs and deleted the com.apple.mail.plist in "users/.../library/preferences/. Then I configured the account again, but not automatically, putting the pop and smtp of Yahoo.de. And here comes the difference (I think): I waited to connect to the server (smtp) for a few minutes - last time I cancelled and than I connected again, making the setup eventually skipping the process of connection, as it changed the window in a snap.
    second, I deleted the first message that wouldn´t download, as suggested here: http://discussions.apple.com/thread.jspa?messageID=10034980#10034980.
    Now I´m happy as I could be, but some things still don´t make sense...
    I hope this might help someone else,
    Dani.

  • Mail periodically won't send.

    Three or four times a day Mail won't send an email. The other 40 or 50 attempts to Send Mail work fine. The whirling icon spins beside Outbox, and eventually (maybe three minutes) I'll get a message that Mail can't send the message using the selected server. If I click Try Again, it will typically send the message.
    When Mail doesn't present me with the dialog, I have to quit the application. Upon relaunch, I see an email in the Outbox and I can select it and send it, typically without an error.
    This is a sporadic problem, appearing with Leopard, and remaining consistent through all incremental OS upgrades.
    I use Comcast as my internet provider, and my email is hosted at GoDaddy.
    I have seen other posts with similar problems, but no solutions.
    Ideas? Thanks.

    Greetings,
    It's very doubtful that it's the OS - I have 5 of my own machines, and hundreds at work, and there are no issues with sending mail. I move around a lot from city to city and from state to state and I have yet to have a problem of any kind, much less mail.
    Do a Repair Permissions, and/or trash the .plist files for Mail, clean out the startup items in System Preferences > Accounts > Login Items, and restart the computer. You could also do a "sudo periodic daily weekly monthly" to clean out the cache.
    Some fools leave their computers on all the time, and this will shorten the life of any computer, or anything in general, for that matter. I shut my machines down if I'm going to be away from them or more than an hour or so. I will leave them on over night once a month to run the scheduled maintenance.
    If you leave your machine on all the time, corruption can result in various parts of a machine, it's not usual, but it can happen.
    I run nothing out of the ordinary, like application enhancers, APEs, GROWL, other haxies or any of that junk, nor questionable software, like open source junk, and most of it is just that.
    The only true way to determine where the problem lies is to erase the hard drive and start fresh. Just use software like Office 2004 or 2008, the iWork and iLife stuff. Adobe CS stuff should be Ok, as well as any from the major software folks. Load no junkware.
    Try your email and see if you still have issues. You can add software a little at a time and see when it breaks.
    To say an OS is bad doesn't even make sense to any rational person - there are millions of satisfied users out there that never come to these forums, so that in itself should be a wake up call. There are software issues, from time to time, but by and large, those issues are addressed pretty quickly and Apple would never let something like that fester without addressing it. That's why we have updates from time to time. Most of the issues here, are self generated, one way or another.
    Cheers,
    M.

  • Mail app won't send mail, but it will receive mail

    The mail app on my macbook pro and iphone will not send mail, but they can recieve mail.  I deleted both accounts and reloaded them and they still won't work.  After that I ran repair permissions and it found nothing wrong.  Has anyone experienced this problem and how can I fix this?

    I had same problem with my MBA and Mac Desktop (don't have iPhone)...could receive but not send emails after Lion upgrade.  I only experienced it at home versus at work (inconsistently on both on my macbook air and my desktop mac).
    For me the solution was when you compose an email there are two dropdown listboxes next to From:  ...in the second one select smtp.me.com:yourusername   Until Apple makes a change you might need to do that each time you send or reply to a message.
    I think it has something to do with if you don't do that then port 25 might get used which can be blocked by a lot of ISPs.
    Apple support helped me solve this problem and said it was a known issue they are working on.
    Hope this helps with your issue!

  • Mail replies won't send in OS 10.8.3

    Replies to mail messages that have a link within the message won't "send" unless I delete the link and any other messages beneath the message I am replying to .  Message hangs up in activity window . I've checked with my ISP and all is fine there.  My older iMac running OS 10.6.8 mail works flawlessly .  What is going on here?  New messages "send" o.k.   So I'm clueless and bummed about what appears to be some mail glitch on ML.
    Also, what is this new "envelope shaped" mail format with the blue border ?  Is there some option to change the format back to the regular " letter shaped" mail format ?
    Thanks for any help !
    Carolyn.  a.k.a. gladys2

    So far, no big change, but I have figured out how to circumvent the problem by just deleting anything  I'm replying to other than the last message in a group of "back and forth" mail.  (if that makes any sense).  Its a minor hassle, but I'm not willing to risk messing up things by getting into areas where I'm not comfortable.... like messing with the Library.
    I did run Repair Permissions a couple of times after I had tried everything else that was obvious, shut down, unplugged and restarted. I also sent an e-mail to Apple support and told them what I thought about Mail in ML.
    It comforts me somewhat to see that there are a lot of folks out there with the same type problems, each with variations on the theme ! :-)
    I do appreciate all you suggested.  If you come up with any other easy ideas, let me know.  You are a good guy to show concern and try to help !
    Carolyn

Maybe you are looking for

  • Analyzing and recognizing a sound file with a squeak

    I am running a brake test on a piece of equipment. I would like to be able to use Labview and a microphone, record every stop cycle and analyze the wav file for a squeak. I would just like to be able to keep track of how many squeaks occured during t

  • Printing Problem in 6i

    Hi, I am facing a problem in printing from Reports 6i. We are using shared Laser Printer HP 4100 N. If i print report using this printer then 6i given General Page Fault (GPF) and comes out of program. Can anybody help me in resolving the issue. This

  • The requested time out error

    Hi All, We have completed developing application and now tries to validate and distribute my application to apple app store. But i am getting error during validation and distribute the application, giving the error "the request timed out". Its happen

  • Hi, problem in goods issue to cost center Error message M7314

    Hi to you all, I am trying to post a good issue for a material to a cost center but an error message is coming out and says that "stock becomes negative see long text. message no - M7314". the material type was at the begining not valorated (like NLA

  • CRM BW Service request analysis Reports

    Dear All, I am using the data source '0CRM_SRV_REQ_INCI_H' to extract the service requests created. And based on which i need to create SLA report in BI. I have extracted the data from the mentioned DS and loaded to DSO '0SRQ_DS10' and then to cube '