Mail stopped working after replacing primary HD

Apple Mail stopped working after replacing and restoring the Main Hard Drive in the upper bay.  Internet connection is good, and the Mail client troubleshooting (Comcast) was no help.  I can start the App, but it does not retrieve or send mail through Comcast anymore.  I have a MacBook Pro with the same settings and Mail works fine.

Thanks for replying.
This is odd because my PowerMac G5 with Leopard Mail cannot receive or send email.  Connection doctor is showing all red dots on every email account with Comcast (BTW, GMAIL accounts okay).  On my Blackberry, and my MacBook Pro (Lion), the setting are all the same, passwords, etc., and the later two have no issues.  I even created a test Administrator Account in "Accounts" in System Preferences on the G5, logged into the Test Account and tried to create a new mail account with the same settings, and yet during the set-up (Welcome to Mail), I get an error message that says Mail cannot log into Comcast's POP server with the current settings.  I have also tried changing passwords, no help. Also the usual disk repair, permissions,  motherboard resets, zapping PRAM, etc.
Out of ideas...
Thanks for any help...

Similar Messages

  • My work e-mail stopped working after upgrading to 5 ios.

    My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • Mail stops working after a while

    3G phone here set up to use Yahoo Mail. After awhile, it simply stops working. Even using the refresh button didn't do anything other than glowing for a sec and then nada, mail is not updated. Anyone else seen this problem? The only workaround I have found is to delete the yahoo mail account and re-add it. What a pain.

    I think I may have a variation of this problem.
    Unfortunately I can't confirm right now because apparently no iphones are getting email or web access unless they're on wifi...
    I'll be 3g connected and either using email - my domain or web. without warning the access just goes away. Workarounds that have previously restored access -> disabling / enabling 3g. shut down & Restart the phone.
    Short of those 2; possibly going to airplane mode & back, the access remains gone until recycling somehow.

  • Mail stops working after 10.9.3 upgrade

    Hello -
    After the 10.9.3 upgrade, Mail stopped retrieving new messages from my IMAP server. I can send e-mail from Mail without problem. I installed Airmail and it seems to work fine and I can also see the new e-mails by logging into the server via a browser or through gmail.
    I've tried deleting the account and reinstalling it , shutting down and restarting the machine several times but both were without success.
    Any ideas as to cause and resolution are much appreciated.
    Thanks!

    And...for no particular reason I can tell...it started working this morning after 36 hours of frustration. 
    Thank you William for your interest in my problem and for pointing me to the "Connection Doctor" and "Activity" windows; I didn't even know that information was available.
    All the best.
    Austin

  • HT4623 Mail stopped working after 6.1 update

    How can I get my mail on my iPhone to work again after 6.1 update.
    It just goes off seconds after I open it.

    I am having the same problem it is saying that i have headphone plugged in when i dont. i Just did the update on monday and now i am having this problem!

  • TS3276 Icloud mail stops working 3 minutes after I sign in

    Icloud mail stops working every time I sign in, for some reason it just freezes wherever I am working. No idea

    mellfrommountain brook wrote:
    When I try to log onto a new site the blue line in the text box freezes and the connection does not take place. This happens about 5 minutes after logging on.
    There are many possible reasons for that.
    Most likely a corrupted cookie or cache file for that site may be responsible.
    On the Safari menu bar got to Safari -> Empty Cache
    Then go to Safari -> Preferences and click on the 3rd symbol from right.
    Click on Details -> type the name of the particular site (e.g. facebook) in the search field and delete all upcoming entry's.
    Restart Safari and try again to log in on the site.
    Lupunus

  • Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Hmmm, here's the opposite problem/fix...
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch
    Is your gMail POP or IMAP?
    If IMAP...
    Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password

  • Send Link and Mail To are stop working after update to FF v.13 on WinXP

    Send Link and Mail To where stopped working after upgrade to FF13 on win XP. I'd appreciate any suggestions.
    Thank you in advance

    Can you check to see whether your mailto setting got changed?
    orange Firefox button ''or'' classic Tools menu > Options > Applications
    In the Search box above the list, type or paste '''mailto''' and pause while Firefox filters the list. On the right side, you can select your mail application. Unless it's missing. Are you able to establish the connection?

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

  • Right USB Port stops working after disconnecting device since 10.9.2

    Hi,
    Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
    Steps I've taken:
    Disk Persmission
    PRAM
    SMC
    Reapplied the 10.9.2 update
    Sent feedback to Apple
    Some Output:
    Boot Mode: Normal
    Total CPU usage:
       User 11%                    System 10%
    Max %CPU by process (name, UID, %):
       WindowServer         0   4.6
    Loaded extrinsic kernel extensions:
       at.obdev.nke.LittleSnitch (4052)
       com.driver.JRDUSBModemData64 (4.0.5)
       com.protech.NoSleep (1.3.3)
    Loaded extrinsic daemons:
       net.sourceforge.MonolingualHelper
       com.oracle.java.JavaUpdateHelper
       com.oracle.java.Helper-Tool
       com.microsoft.office.licensing.helper
       com.freemacsoft.appcleanerd
       com.adobe.fpsaud
       at.obdev.littlesnitchd
    Loaded extrinsic user agents:
       com.oracle.java.Java-Updater
       at.obdev.LittleSnitchUIAgent
    /Library/LaunchAgents:
       at.obdev.LittleSnitchUIAgent.plist
       com.oracle.java.Java-Updater.plist
    /Library/LaunchDaemons:
       at.obdev.littlesnitchd.plist
       com.adobe.fpsaud.plist
       com.freemacsoft.appcleanerd.plist
       com.microsoft.office.licensing.helper.plist
       com.oracle.java.Helper-Tool.plist
       com.oracle.java.JavaUpdateHelper.plist
       net.sourceforge.MonolingualHelper.plist
    /Library/PrivilegedHelperTools:
       com.freemacsoft.appcleanerd
       com.microsoft.office.licensing.helper
       com.oracle.java.JavaUpdateHelper
       net.sourceforge.MonolingualHelper
    Extrinsic loadable bundles:
       /System/Library/Extensions/JRDMassStorageDriver32.kext
                 (No bundle ID)
       /System/Library/Extensions/JRDMassStorageDriver64.kext
                 (No bundle ID)
       /System/Library/Extensions/JRDUSBModemData32.kext
                 (com.driver.JRDUSBModemData32)
       /System/Library/Extensions/JRDUSBModemData64.kext
                 (com.driver.JRDUSBModemData64)
       /System/Library/Extensions/LittleSnitch.kext
                 (at.obdev.nke.LittleSnitch)
       /System/Library/Extensions/NoSleep.kext
                 (com.protech.NoSleep)
       /Library/Audio/Plug-Ins/Components/A52Codec.component
                 (com.shepmater.A52Codec)
       /Library/Internet Plug-Ins/Flash Player.plugin
                 (com.macromedia.Flash Player.plugin)
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
                 (com.oracle.java.JavaAppletPlugin)
       /Library/PreferencePanes/Flash Player.prefPane
                 (com.adobe.flashplayerpreferences)
       /Library/PreferencePanes/JavaControlPanel.prefPane
                 (com.oracle.java.JavaControlPanel)
       /Library/PreferencePanes/NoSleep.prefPane
                 (com.protech.NoSleepPref)
       /Library/QuickTime/AC3MovieImport.component
                 (com.cod3r.ac3movieimport)
       /Library/Spotlight/LogicPro.mdimporter
                 (No bundle ID)
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
                 (com.skype.skypeabdialer)
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
                 (com.skype.skypeabsms)
       Library/QuickLook/Pacifist.qlgenerator
                 (com.charlessoft.pacifist.qlgenerator)
       Library/Services/Clip to Day One.workflow
                 (No bundle ID)
    Login hook:
       /Library/Scripts/Hooks/login.sh
    Global login items:
       $HELPER_PATH
       $HELPER_PATH
       $HELPER_PATH
       $HELPER_PATH
       $HELPER_PATH
    User login items:
       iTunesHelper
       Sparrow
       Sort Menubar Items
       AppCleaner Helper
       SurplusMeterAgent
    Safari extensions:
       Shut Up
       AdBlock
       SafariKeywordSearch
       Disconnect
       MapTricks
    Restricted user files: 28
    Font problems: 0
    Elapsed time (s): 130
    etrecheck output:
    Hardware Information:
              MacBook Air - model: MacBookAir3,1
              1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
              2 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
    Disk Information:
              APPLE SSD TS064C disk0 : (60.67 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        disk0s2 (disk0s2) <not mounted>: 59.81 GB
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              EFI (disk2s1) <not mounted>: 209.7 MB
              Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
              disk2s3 (disk2s3) <not mounted>: 189.89 GB
              Boot OS X (disk2s4) <not mounted>: 134.2 MB
    FireWire Information:
    Kernel Extensions:
              at.obdev.nke.LittleSnitch          Version: 4052
              com.driver.JRDUSBModemData64          Version: 4.0.5
              com.protech.NoSleep          Version: 1.3.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                     [loaded]          at.obdev.littlesnitchd.plist
                     [loaded]          com.adobe.fpsaud.plist
                     [loaded]          com.freemacsoft.appcleanerd.plist
                     [loaded]          com.microsoft.office.licensing.helper.plist
                     [loaded]          com.oracle.java.JavaUpdateHelper.plist
                     [loaded]          net.sourceforge.MonolingualHelper.plist
    Launch Agents:
                     [loaded]          at.obdev.LittleSnitchUIAgent.plist
    User Launch Agents:
    User Login Items:
              iTunesHelper
              Sparrow
              Sort Menubar Items
              AppCleaner Helper
              SurplusMeterAgent
    3rd Party Preference Panes:
              Flash Player
              Java
              NoSleep
    Internet Plug-ins:
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Top Processes by CPU:
                  12%          com.apple.WebKit.Networking
                   6%          Safari
                   4%          WindowServer
                   3%          EtreCheck
                   2%          hidd
                   1%          Terminal
                   1%          notifyd
                   1%          opendirectoryd
                   1%          com.apple.WebKit.WebContent
                   0%          Dock
    Top Processes by Memory:
              147 MB          Safari
              137 MB          com.apple.WebKit.WebContent
              49 MB          mds_stores
              29 MB          com.apple.WebKit.Networking
              27 MB          TextEdit
              23 MB          WindowServer
              20 MB          Disk
              20 MB          Sparrow
              20 MB          CVMCompiler
              18 MB          Finder
    Nothing out of the ordinairy. Thanks for any help

    It's an Apple Pro keyboard and mouse, the dongle is
    plugged into the Mac and not the keyboard. The same
    set-up is, and has been working on all our other
    Macs.
    The sleep issue sounds interesting- hum, maybe...
    Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
    I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
    AndyH

  • Adobe Acrobat 9.0 has stopped working  (after Start Form Wizard)

    Downloaded Trial for Adobe Acrobat 9.0
    Tried reinstalling
    Latest windows 7 patches
    Adobe Acrobat 9.0 has stopped working
    (after Start Form Wizard)
    Windows can check online for a solution to the problem
    details"
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Acrobat.exe
      Application Version:    9.0.0.332
      Application Timestamp:    4850eb76
      Fault Module Name:    MakeAccessible.api
      Fault Module Version:    9.0.0.332
      Fault Module Timestamp:    4850e54e
      Exception Code:    c0000005
      Exception Offset:    000e1059
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    ===============================
    ===============================
    SYSTEM INFORMATION
    =========================
    System Parameters
    Available Physical Memory: 1429660 KB
    Available Virtual Memory: 1912212 KB
    BIOS Version: DELL   - 42302e31
    Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
        Version: 8.00.7600.16385 (win7_rtm.090713-1255)
        Creation Date: 2009/07/13
        Creation Time: 4:43:32 PM
    Default Mail: Microsoft Office Outlook
        mapi32.dll
        Version: 1.0.2536.0 (win7_rtm.090713-1255)
    Graphics Card: Intel(R) G33/G31 Express Chipset Family
        Version: 8.14.10.1930
        Check: Not Supported
    Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:25:18 AM
    Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
        Version: 9.3.2.163
        Creation Date: 2010/04/03
        Creation Time: 10:57:52 PM
    Locale: English (United States)
    Monitor:
        Name: Intel(R) G33/G31 Express Chipset Family
        Resolution: 1024 x 768 x 75
        Bits per pixel: 32
    OS Manufacturer: Microsoft Corporation
    OS Name: Microsoft Windows Vista
    OS Version: 6.1.7600 
    Page File Space: 4194303 KB
    Processor: x86 Family 6 Model 23 Stepping 7  GenuineIntel  ~2493  Mhz
    System Name: DELLINSPIRON
    Temporary Directory: C:\Users\alan\AppData\Local\Temp\
    Time Zone: Pacific Standard Time
    Total Physical Memory: 2097151 KB
    Total Virtual Memory: 2097024 KB
    User Name: alan
    Windows Directory: C:\Windows
    Installed Plugins
    =================
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 1:59:50 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:05:18 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
        Version: 9.0.0.0
        Creation Date: 2008/06/12
        Creation Time: 2:08:24 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:17:10 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:00:30 AM

    To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

  • Why do the "SAVE", "SAVE AS" and "UNDO" functions of InDesign CS6 stop working after a short time?

    Why do the "SAVE", "SAVE AS" and "UNDO" functions of InDesign CS6 stop working after a short time?

    Normally they don't. You might have some sort of problem on your system, possibly a conflict with other software, or corrupt ID prefs or application. Trashing the prefs is easy, and good place to start: Replace Your Preferences
    It will help if you tell us the OS version, whther you've installed the 8.0.1 patch, and how you are trying to access the commands, and what happens when you do. Is this isolated to one file, or does it happen with all files?

  • Mail not working after installing osx 10.9.4

    Immediately after intalling Mail stopped working - all mailboxes have an "!" in a triangle by them.
    Unlike in the past, pressing the "fetch mail" envelope icon does nothing
    Tried using the "combo" update as recommended here, but that only worked for a short period of time
    Internet works, email accounts are all working on iphone, ipad and on my macbook pro 2013 if using gmail web - just not via Mail.
    Appreciate any help as very irritating, and now going on for several weeks.........

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Why does mail stop working?

    Why does mail stop working when it has worked fine for years?

    OK, thank you.  I use apple for e-mail.  I have an @me address and I have long subscribed to mobile me, which has recently become icloud.  Yesterday the @me mail account appeared to stop recognizing my e-mail password for my primary mail account on my two imacs but not on my ipad.  The most recent e-mail I have received on my imacs is 7:16am yesterday, but I know from my ipad that I have received numerous e-mails since then.  I have other mail accounts, including one for the school where I teach.  I am receiving e-mail on the school account ok.
    I made no changes to my password or otherwise for my primary mail account any time recently.  I also still have my @mac address.
    Generally, I do not understand icloud.  I do not understand how to sync information across computers.
    When I go to preferences in mail and I click and accounts and account information, I do not understand anything that I see there.  When I try to re-type my password, there seems to be no way to save it except to switch to another mail account.  I know from past experience that if I attempt to fix whatever might be wrong with mail I do not know what I am doing.
    Any information would be helpful.  Thank you.

  • Keyboard shortcut command-w stopped working after upgrading to OSX 10.9.4

    Dear all,
    after upgrading to OSX 10.9.4 the keyboard shortcut command-w stops working after about 30 min of having the machine powered on. Interestingly, this phenomenon is not restricted to a certain app (Safari, etc.).
    In system preferences > keyboard all settings have been set to "default".
    Anybody else having the same issue?
    Many thanks,
    wolfgang

    Hi folks,
    just as quick documentation for possibly other error sources for the problem "shortcut command-w not working":
    If problem persists close all applications (allL!). Then open one app like Safari, open several tabs and check whether command-w works.
    Reason: it could happen that you've set command-w inadvertently in another app like Snagit. And when setting this the app did not tell you "listen dummy, this is a standard command, do you really want to replace a standard command with a app-specific command. Don't be surprised if it doesn't work when the app is running."
    This is what happened to me. So close all apps and check whether problem persists.
    reg,
    wolfgang

Maybe you are looking for

  • Fleet Equipment data transfer

    Please advise on how to load Fleet Equipment specific fields such as Primary Fuel (FUEL_PRI) and Calculation Method (PRI_CALC). My investigation into the provided IBIP* stuctures and Equipment BAPIs was unsuccessful. My goal is to use LSMW. Thanks Ma

  • In which way is the language choosen?

    We created a BSP-Applikation some time ago and it's on customer site for some years now. A customer is wondering about the language selection in his system. If a user logs on the Applikation in a language where no translation exists he is getting the

  • Table name for IT

    Hi export, how to find out the table name for Infor type, such as I want to know IT0041 and IT0002 store in which table.

  • Barcode Printing from EP --using barcode4J (Gurus kindly help me)

    Dear Experts, Barcode Printing from EP --using barcode4J we want to print employee number as barcode in EP(version 6.4 SP 19). we tested the barcode creation a standalone class, it works fine Sample Code as follows ================================ Co

  • Layout Problems When Exporting to ePub

    Hi, When exporting my document to ePub, I always receive the following errors: Export Warning - Some style settings, including multiple columns, table styles, and character formatting, aren't supported. Your document might look different. Export Warn