Mail stops working after a while

3G phone here set up to use Yahoo Mail. After awhile, it simply stops working. Even using the refresh button didn't do anything other than glowing for a sec and then nada, mail is not updated. Anyone else seen this problem? The only workaround I have found is to delete the yahoo mail account and re-add it. What a pain.

I think I may have a variation of this problem.
Unfortunately I can't confirm right now because apparently no iphones are getting email or web access unless they're on wifi...
I'll be 3g connected and either using email - my domain or web. without warning the access just goes away. Workarounds that have previously restored access -> disabling / enabling 3g. shut down & Restart the phone.
Short of those 2; possibly going to airplane mode & back, the access remains gone until recycling somehow.

Similar Messages

  • Mail stopped working after replacing primary HD

    Apple Mail stopped working after replacing and restoring the Main Hard Drive in the upper bay.  Internet connection is good, and the Mail client troubleshooting (Comcast) was no help.  I can start the App, but it does not retrieve or send mail through Comcast anymore.  I have a MacBook Pro with the same settings and Mail works fine.

    Thanks for replying.
    This is odd because my PowerMac G5 with Leopard Mail cannot receive or send email.  Connection doctor is showing all red dots on every email account with Comcast (BTW, GMAIL accounts okay).  On my Blackberry, and my MacBook Pro (Lion), the setting are all the same, passwords, etc., and the later two have no issues.  I even created a test Administrator Account in "Accounts" in System Preferences on the G5, logged into the Test Account and tried to create a new mail account with the same settings, and yet during the set-up (Welcome to Mail), I get an error message that says Mail cannot log into Comcast's POP server with the current settings.  I have also tried changing passwords, no help. Also the usual disk repair, permissions,  motherboard resets, zapping PRAM, etc.
    Out of ideas...
    Thanks for any help...

  • X121e touch pad buttons stop working after a while

    Hello everyone,
    I have a lenovo thinkpad x121e.
    The buttons above the touchpad (for right and left clicking) and also the trackpoint stop working after a while (about 45 min). Although the touchpad itself works without problems.
    If I reboot the operating system (Windows 7, 64-bit version) everything works fine for a while and then the buttons and trackpoint won't respond again.
    It is always the same routine. Rebooting windows, everything alright, stop working, ...
    I am using the newest driver version and de- & reinstalling of UltraNav haven't solved the problem.
    Has anyone an idea what causes my problems with the touch pad buttons and how to solve it? (I guess it's not a hardware problem.)
    Many thanks in advance.

    Hi again, li-lup
    I would recommend trying to use the standard Synaptics driver found here. Synaptics is the company that develops the UltraNav software, so there should be no loss of compatibility/features. I have witnessed several cases where this driver has helped others with mouse issues, so it may help yours as well.
    The first thing you will need to do is to remove the UltraNav driver from the system. To do this, open the Start menu and type Device Manager into the Search box, and then press Enter. Once here, double click on Mouse and other pointing devices, and then right-click on the UltraNav device. Naviage to the Driver tab and select Uninstall... from the bottom of the window. Follow the prompts to uninstall and then restart when prompted by Windows. Windows should install a generic driver that will allow you to use the TouchPad when downloading the Synaptics driver. 
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Pavilion g6 sound stops working after a while

    Over the past week the sound in my laptop has begun to stop working after a while of the laptop being on. It works initially but after a while when I check it doesn't work anymore. The mute button does not mute work, the volume increse and decreases on the screen but it does not affect the absense of sound. Please Help. 
    System Details: HP Pavilion g6, Windows 8

    HI. I'm having the same problem. This has been happening for some time now. I can play anything with sound and then it suddenly goes and I can't use the mute/on/off or work out what's happening. Is it a fault? 

  • My work e-mail stopped working after upgrading to 5 ios.

    My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • Mouse and Keyboard stops working after a while

    Hi, I'm not even sure where to start to find the cause of the problem. I have a normal ps/2 keyboard and USB optical mouse, both of them just stops working after a few hours. The light on the mouse just dies and the keyboard is not responsive at all.  I have to do a hard reboot of my computer. How and where can I diagnose the problem? I noticed the problem started when I upgraded to the latest kernel.

    And then after a while it will just use a new address:
    Oct 31 01:47:15 wdesktop usb 1-1: USB disconnect, address 6
    Oct 31 01:47:15 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 7
    Oct 31 01:47:16 wdesktop usb 1-1: configuration #1 chosen from 1 choice
    Oct 31 01:47:16 wdesktop input: Microsoft Microsoft Wheel Mouse Optical as /class/input/input8
    Oct 31 01:47:16 wdesktop input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical] on usb-0000:00:10.0-1
    Then after that my mouse is unusable, the following is shown:
    Oct 31 01:48:41 wdesktop usb 1-1: USB disconnect, address 7
    Oct 31 01:48:41 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 8
    Oct 31 01:49:13 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 9
    Oct 31 01:49:45 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 10
    Oct 31 01:49:56 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 11
    Oct 31 01:50:08 wdesktop uhci_hcd 0000:00:10.0: Controller not stopped yet!
    Unplugging and plugging the mouse back does not work
    I found a workaround for that by unplugging the mouse, removing the uhci_hcd and adding it back, so:
    sudo rmmod uhci_hcd
    sudo modprobe uhci-hcd
    But I'm still not sure what causes the problem.
    Last edited by willy (2008-10-30 15:02:54)

  • [SOLVED] Ethernet stops working after a while

    When I work on this computer, the ethernet stops after a while, sometimes this is after 2 minutes, sometimes after half an hour. When I do
    sudo /etc/rc.d/network restart
    everything works again for a while. The internet doesn't work in chromium nor pacman so it isn't just one application.
    Anyone knows how I can find the cause of this?
    Thanks already!
    Last edited by AlexCogn (2012-10-14 07:21:25)

    Also, tell us about your network.  Are you plugged into a corporate or school network? your own private router? into a DSL or Cable modem?
    When it stops, what is the output of ip link  ??
    of ip addr  ??
    of ip route  ??
    What is the make, model and chipset of your NIC?
    Last edited by ewaller (2012-10-08 16:08:19)

  • Mail stops working after 10.9.3 upgrade

    Hello -
    After the 10.9.3 upgrade, Mail stopped retrieving new messages from my IMAP server. I can send e-mail from Mail without problem. I installed Airmail and it seems to work fine and I can also see the new e-mails by logging into the server via a browser or through gmail.
    I've tried deleting the account and reinstalling it , shutting down and restarting the machine several times but both were without success.
    Any ideas as to cause and resolution are much appreciated.
    Thanks!

    And...for no particular reason I can tell...it started working this morning after 36 hours of frustration. 
    Thank you William for your interest in my problem and for pointing me to the "Connection Doctor" and "Activity" windows; I didn't even know that information was available.
    All the best.
    Austin

  • ADF: Page navigation and buttons stop working after a while

    Hi all,
    We have a web app built with ADF Faces/JDev 10.1.3 that runs in OC4J 10.1.2.0.2. Sometimes we encounter this problem in our JSF pages: after a while (can't relate to some particular action), all navigation in a page (links, tabs, buttons, etc) just stops working, i.e. you can click them, the server receives some request (we see this in the logs), but the desired action never happens. It's just like the page keeps refreshing all the time. There is no navigation out of the page at this point, it's completely stuck.
    If, at the same time, we connect to the app from a different browser, it will work fine, but the first browser will remain in the faulty state.
    I turned the enableTokenValidation in the pages on and off, but it seems to make no difference. Can anyone provide an idea about what might be going on?
    Thanks,
    Serban

    Hello,
    Any answer on this issue? It seems that ADF is pretty unstable if user clicks repetedly on the same submit button (like a double-click) or on different tabs on the old page, until the next page loads. We are using .jspx pages and combined with SSL access this behaviour is behaving even worser.
    Basically we encounter the following problems:
    1) It seems that users with not so good network access (and accessing ADF app on a SSL OC4J) still have access to the origin page until the target page loads on a submit. If they click a different button or tab on the origin page in this interval (waiting for their previous action to complete), they usually get a JavaScript error that will block the interface until they do a manual refresh (F5)...
    This can be reproduced even on client machines with good network access if you click very fast on the same button twice or on two different submit buttons.
    2) It seems that sometimes the browser keeps showing the loading bar in the status bar even if the new .jspx page is already loaded. Any advice on how to solve this, as the users might be tempted to push application buttons or browser navigation thinking that the page is blocked?
    All the above happen on IE 6, which is the preffered browser.
    Thanks! I can give you more details if needed.

  • Audio stops working after a while (30+ minutes uptime with audio)

    I'm having one hell of a time with the audio on my machine hope someone can help...
    (edit: forgot to mention, installed packages: pulseaudio-alsa, pulseaudio-gconf and paprefs, using i3 WM and SDDM. Switching to i3 and SDDM are the biggest recent changes I made before this started, although I did pacman -Syu at some point around then too)
    Here's what I'm experiencing:
    Start up my machine, and usually watch some videos and play some video games.
    After things have been running for a while (anywhere between 30 mins and a few hours) I'll quit my game, load up a different video, or do something else that involves quitting an application that plays audio.
    From this point on, any new application that are opened (including new tabs in any web browser) will not play audio, even if other applications are currently playing audio.
    I haven't been able to reproduce the issue reliably.
    I've tried examining the output of "pacmd list", and I thought I had found some differences yesterday between when its working and when its not, bot today the output is different when audio isnt working than it was yesterday. (actually, I just checked again, and now it is the same as yesterday). I can post the output from when its working vs when its not working if that helps diagnose anything. The only differences that seemed significant is that there is a second module called "module-alsa-card" listed after the sound stops working, two new sources are listed for what I believe are my headphones and mic plugged in the rear panel, and a new card shows up which I think is the onboard audio. It almost seems like pulseaudio is taking over my soundcard when I stop using it, and in doing so prevents audio from playing.
    There are a couple of times when it just started working again, without me doing anything at all. I'm really losing my mind over this, any advice is welcome!
    Last edited by beizhia (2015-05-28 05:15:19)

    Hi,
    Try the following.
    Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
    Locate update KB2962407, right click it and select Uninstall.  When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'.  You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
    After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Why do my hyperlinks stop working after a while?

    On many occasions, I make a hyperlink, publish my site and it works for a while, then the link disappears.
    Why does this happen?
    On other occasions, I paste the link into the hyperlinks box, check to make sure it is there, but when the site publishes, the link just disappears.
    These are two separate happenings.
    Could you tell me what I am doing wrong and how I can correct it?
    Thanks for the help.

    I do that. I have a Mac so I hit the return key. My links work for a while after my site is published, then they just disappear. My followers will write me and say 'not working'. It doesn't happen all the time but often enough that it's troublesome if I'm launching a new design.
    In other instances, I paste in the link, hit the return key, see it in the window but when I publish my site, no link.
    I can struggle through, it's just annoying and I thought I would ask.
    Thanks for your help.

  • Remote Desktop sound stops working after a while.

    Has anyone a solution to this problem of the sound just dropping out of a RDP connection after a day or two?
    Win Server2008 (32 bit) running as a Terminal Server.
    WIN 7 Clients (32 bit)
    Sound is absolutely critical on the program being ran on the WIN7 clients when connecting via RDP to the Server 24/7.
    But the sound just stops working on the RDP clients after a day or two.
    If I minimize the RDP session and try the sound from the native windows session it works, but sound is not working within the RDP session.
    and it takes a restart of the RDP session to restore sound, but then aftera day or two I get a call to say the sound is no longer working- a restart of the RDP sessions restores the sound.
    I have checked the Environment sound settings in the RDP setup on the clients and have them set to play on the client, and I have checked that sound is not disabled in the Terminal Server end of things for RDP sessions.
    I would really appreciate to help with this if anyone has suggestions.

    OK after updating the Server and clients I am still having this issue :( 
    and just today after no sound problems for 6 days the sound dropped out on a couple of RDP sessions, yet the sound on the client itself worked fine when tested (minimise the RDP session).
    It took the RDP sessions to be restarted to restore the sound within the session.
    I have found similar (old) thread regarding this problem:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/958fd891-6f55-432b-8268-a326ac6b2b2e/sound-in-remote-desktop-session-stops-working
    but no one has informed about if as solution was ever found.

  • Oracle OCI driver stops working after a while of disuse

    I am using wl server 8.1, oracle oci driver (oracle 9i client), on solaris.
    When i create a connection pool using the oci driver, it connects, and i
    test it, and the tests run fine.
    The Application works for a few days. Then eventually after disuse, say over
    the weekend, I get exceptions in the log (the message is at end of email).
    This is because it gives me a sql exception saying it cannot resolve the
    service name. The database is up and running, confirmed.
    I tried testing the connection pool manually through the console, and it
    failed with the service name exception. But it would connect fine when i
    used sqlplus to connect to the databse, using the same service name.
    Why does this deteriorate over time? Is there a specific test that would
    prevent this from happening?
    Once i restart the weblogic server, the connection pool connects fine. But
    this is not a solution, since I can't be restarting the server all the time.
    Any one got any ideas?
    -Ayan
    ------------WEBLOGIC MANAGED SERVER LOG----------
    ####<Mar 27, 2004 4:20:57 AM EST> <Error> <JDBC><<WLS Kernel>> <>
    <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "CRCPool2" failed
    with exception: "java.sql.SQLException: ORA-03113: end-of-file on
    communication channel
    ".>
    ####<Mar 27, 2004 4:20:57 AM EST> <Info> <JDBC> <<WLS Kernel>> <>
    <BEA-001128> <Connection for pool "CRCPool2" closed.>
    ---------- and then eventually this----------
    ####<Mar 28, 2004 4:33:11 AM EST> <Warning> <JDBC> <<WLS Kernel>> <>
    <BEA-001129> <Received exception while creating connection for pool
    "CRCPool2": ORA-12154: TNS:could not resolve service name
    >

    Ayan wrote:
    I am using wl server 8.1, oracle oci driver (oracle 9i client), on solaris.
    When i create a connection pool using the oci driver, it connects, and i
    test it, and the tests run fine.
    The Application works for a few days. Then eventually after disuse, say over
    the weekend, I get exceptions in the log (the message is at end of email).
    This is because it gives me a sql exception saying it cannot resolve the
    service name. The database is up and running, confirmed.
    I tried testing the connection pool manually through the console, and it
    failed with the service name exception. But it would connect fine when i
    used sqlplus to connect to the databse, using the same service name.
    Why does this deteriorate over time? Is there a specific test that would
    prevent this from happening?
    Once i restart the weblogic server, the connection pool connects fine. But
    this is not a solution, since I can't be restarting the server all the time.
    Any one got any ideas?
    -AyanHi. Is there a firewall between the weblogic server and DBMS? There is
    a problem with OCI losing connectivity to the DBMS. OCI may be keeping
    a socket open as long as the process (weblogic) is running.
    Joe
    ------------WEBLOGIC MANAGED SERVER LOG----------
    ####<Mar 27, 2004 4:20:57 AM EST> <Error> <JDBC><<WLS Kernel>> <>
    <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "CRCPool2" failed
    with exception: "java.sql.SQLException: ORA-03113: end-of-file on
    communication channel
    ".>
    ####<Mar 27, 2004 4:20:57 AM EST> <Info> <JDBC> <<WLS Kernel>> <>
    <BEA-001128> <Connection for pool "CRCPool2" closed.>
    ---------- and then eventually this----------
    ####<Mar 28, 2004 4:33:11 AM EST> <Warning> <JDBC> <<WLS Kernel>> <>
    <BEA-001129> <Received exception while creating connection for pool
    "CRCPool2": ORA-12154: TNS:could not resolve service name

  • HT4623 Mail stopped working after 6.1 update

    How can I get my mail on my iPhone to work again after 6.1 update.
    It just goes off seconds after I open it.

    I am having the same problem it is saying that i have headphone plugged in when i dont. i Just did the update on monday and now i am having this problem!

  • Ver 4.0.1 for PC, why does my scroll wheel stop working after a while? Only happens with Firefox app.

    Closing and relaunching solves problem for a while, but happens again after opening about 5 web pages.

    Closing and relaunching solves problem for a while, but happens again after opening about 5 web pages.

Maybe you are looking for

  • Calling a WD java Application URL from a wsdl at PI

    Hi experts , we have a requirement where a wsdl at PI server should call a webdynpro java application , the URL of the application is  given to PI Team, but they are unable to call my webdynpro java application , is there any standard way of doing th

  • Unable to open forms in 10g AS, windows 2003

    Hi I successfully install oracle 10g AS R2 on windows 2003 server,but unable to opening default forms(text.fmx) from OracleAS form services also getting an error " Page cannot be displayed". Initially when I run the test forms it installed jinitiator

  • Airport Extreme or express

    Will the extreme recognize more than one external hd on a hub that is plugged into the back?  Or does the express support the hard drive yet as it only states printing?

  • I'd like to buy an iPad mini WiFi + cellular in the USA

    Hello everybody! I'm from Italy but I'll soon go on an exchange program in the US. I wanted to buy an iPad mini there because I'm going to need one. I think that iPad mini WiFi + cellular will be the best option so that when I'll come back to Italy I

  • Zooming into image problems

    Hi everybody, I'm trying to learn how to zoom images, and I've been able to put together a test program; based on the posts I've seen on this forum (I didn't see anything about zooming in the Java tutorial), I thought it should be working, but it doe