Mail stops working with Exchange after VPN is launched and then stopped

Mail and Exchange is working fine for me on SL, except when I launch Nortel VPN / Apani to run a work app (other then mail), and then end the VPN session - apple mail doesn't connect to exhange anymore. If I restart the VPN, then it connects with exchange.
I prefer not to run the VPN as I don't need it 99% of the time (and Time Machine doesn't sync with Time Capsule if the VPN is up). I can't find a way to reset the connection or mail, so I end-up running the VPN all the time now, once I get stuck in this mode.
Anyone else seeing this behavior?

I have tried a number of things to get my HP1012 working under Snow Leopard and it will not work. neither will my Canoscan LIDE 200 unless I manually install the driver which HP says you cannot do for its printer. 10.6 may be intelligent but not very. Mac's idea of simple makes it too complicated to determine if and where there is a fault. You can't simply remove and reload the driver as per 10.5 Any ideas out there?

Similar Messages

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

Hi,
The movie is probably MPEG format.
QuickTime Pro and iMovie cannot transcode audio contained in MPEG movies.
Try to convert with SimpleMovieX or MPEG Streamclip instead.
http://www.aeroquartet.com/SimpleMovieX/
http://www.squared5.com
Regards, BJ

Can I work with localhost to create PHP pages and then use DW to upload them

Problem solved
Kevin

If you have movement on the stills you can set up expressions based on in and out points. That's what I do. I then drop all my stills in order into a comp then set the out point for all stills for the longest duration. I then set group colors for layers that I want to make different lengths, do a group select and then adjust the out points for those layers. When I'm done I sequence the layers using the keyframe assistant.
The other way I work is to use an audio track with markers for timing. I have an expression that reads the markers and sets opacity for the layers based on pairs of markers. The motion is also controlled by expressions. That's an even faster way to set up an animated slide show.
The last way I work is just to set in an out points for all layers, sequence the layers, use expressions to do the motion and then use time remapping on a pre-comp to adjust the timing of the slide show. All methods are quick and easy.
Here's a fly in bounce and then drop out fxx preset that will give you an idea of how expressions based on in and out point work for slide shows. You just drag the layer to it's resting position, apply the animatiokn preset and the layer flys in, bounces, and then drops out the bottom of the comp. Works in 2D and 3D space.

PC Suite stops working with Bluetooth after Laptop...

I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...

Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu

Mail has stopped working with msn on my iMac, iPad and iPhone. No settings have been changed.

Mail is no longer working with msn on my iMac, iPad and iPhone 6. No settings have been changed. I tried changing my password thinking I may have been hacked but it comes back saying wrong username and/or password. I have started the 2 way verification but nothing seems to work. Have I missed something?

Upgrade your browser to Firefox 9 and check
* getfirefox.com

Apple Mail not working with IMAP account

I have been using Entourage for my email with several IMAP email accounts. SOme of the accounts I was getting occasional errors so I thought I would try Apple Mail.
I am able to successfully set up the accounts in Mail (i.e. it successfully logs into server) however it does not get any of the mail nor does it get any of the mail folders that are on the IMAP server (viewing email using Web Mail or even going back to Entourage shows the emails on the account). Are there any special (hidden) tricks that I need to do to get Mail to work with a standard IMAP mail server?

I have a very similar problem. Apparently IMAP access is better than POP3. Well IMAP slows my Mac to a complete stop whereas POP3 is seamless. I deleted my POP3 mailboxes after successfully accessing my GMail accounts via IMAP, then it slowed down.
I've deleted the IMAP accounts a few times, but each time a new account is created it forces me to accept IMAP with no option for POP3. The help file also contains no information on POP3.
I get about 50 emails everyday and my usual point of email access has just become redundant, I must now rely on email via my browser and .
I made this change because the iPhone does not sync downloaded emails with Apple Mail. In Mail on my Mac, the one GMail inbox I have setup says there are 11 unread which it eventually shows yet none appear unread. I'll have to rely on web-based email until this is resolved.
Can anyone help with these IMAP access problems?

How do I get macmail to work with exchange server 2010?

my company upgraded to exchange server 2010 and since then, I can't access ical shared calendars. I've been forced to switch to Outlook for my email client at work. Now I can't receive email at home using macmail. Is there a way for macmail to work with exchange server 2010?
Intel tower running snow leopard 10.6.8 with the latest version of macmail.
Any insight into this problem is greatly appreciated.
Thanks very much.

Hi,
Please refer to the following link http://forums.adobe.com/docs/DOC-3581
For changing the HTTP, you need to do it outside the muse after exporting the site or after uploading it to godaddy.
Regards,
Aish

Microsoft Mail not working with Windows 7 & MS-Office 2010

Dear All
I have a client who is using Microsoft Mail for their internal mailing. They have been using MSoffice ( Outlook) for this purpose for last so many years.
We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
When we tried with different versions, we found that if you install Office 2007 it works. If you try Office 2007 and then Office 2010 and remove Office 2007, it still work. But Then it is treated as 2 installations of Msoffice on the same computer.
I need to know whether this is right from Licensing perspective. We 'll be using single copy of office but it may seems as we have installed Office 2007 & office 2010 on same computer.
--Shekhar

We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
Windows 7 is a supported operation system for Office 2010. At what exactly point will you get the specific error?
Is that a Click-To-Run version of Office 2010? By default, for MSI-based version of Office, when you upgrade existing Office 2007 to Office 2010, the earlier version of Office will be removed:
http://office.microsoft.com/en-us/excel-help/keep-earlier-versions-of-office-programs-when-installing-office-2010-HA102597134.aspx
For licensing advice, as <Don> suggested above, you should contact your local Microsoft customer support or reseller.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How E-mail functionality works with Interaction Center Webclient

Dear all,
How the E-mail functionality works with IC Webclient, How can we can send and receive E-mails to customers and internal employees through Interaction Center.
Does SMTP server required to be involved for this functionality or External Telephony system Vendor iprovides this function.
What is ERMS? and why we use this in IC Webclient.
Please educate me to understand the concept of E-mail functionality in IC Webclient.
Your help will be highly appreciated.
Best wishes,
Raghu ram.

Hello Raghu ram,
The SAP CRM Interaction Center uses a concept of a shared email inbox for agent teams. This allows customers to communicate with your Interaction Center by sending emails to a corporate email address like service@yourcompany. You typically group your agents together into queues based on a particular product or skillset. Using this concept, customer's don't send emails directly to a specifc agent's email address, and agent's don't send emails directly to each other. That would rather still be done with groupware products like Microsoft Outlook.
You have three options for routing emails into the CRM Interaction Center. You can push emails real-time to agents via a screen pop using third-party contact-center software like SAP BCM, Genesys, Avaya, and so on. Or there are two options for sending emails into the agent inbox, where the emails are processed in offline mode by agents, technicians, and engineers. You can route emails directly to a specific inbox group/queue by using different emails addreses. Or, you can leverage ERMS to decide where which agents to route the email to based on business rules.
Please see the various notes mentioned above that appear in the sticky note on top of this forum. For example, there is a nice 85 page FAQ document on the Agent Inbox in note 882653. And ERMS note 940882 is also very useful.
Regards,
John

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Setting up Mail to work with Hotmail?

I'm having trouble getting Mail to work with Hotmail. Any ideas? I set it as a POP account a while ago. Login in today and it can't connect. Any help would be appreciated.
Thanks, D

Hi,
First of all you might want to double check the settings you are using for the POP3 account in Mail with Microsoft's instructions:
http://windowslivehelp.com/solutions/settings/archive/2009/01/06/send-and-receiv e-windows-live-hotmail-emails-from-a-mail-client.aspx
Chris

Does Edge transport server for Exchange 2013 work with Exchange 2010?

Hello everyone,
I want to install Edge transport server for my Exchange servers,
Could you tell me if Edge transport server 2013 works with Exchange 2010?
Thank you in advance

Hello
tip:
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
2 If you want to create an EdgeSync
Subscription between an Exchange 2010 Hub Transport server and an
Exchange 2013 SP1 Edge Transport server, you need to install Exchange
2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
server.
sorry my english

Is the AVGA GTX 980 works with adobe after affect and premier

Is the AVGA GTX 980 works with adobe after affect and premier need to upgrade my video card thanks

What is AVGA? Did you mean EVGA?
Yes the GTX 980 works with Premiere. After Effects only uses the GPU for one function so it does not really matter much

What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?

What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?

Welcome to Apple Support Communities
You can install the latest version, iLife '11. It's available at the Mac App Store, but the versions available there aren't compatible with Mac OS X Snow Leopard, so you have to get iLife '11 on a DVD at eBay or Amazon > http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES
After installing it, open  > Software Update, and install the most recent version for Snow Leopard

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's. When I export a qt from Premiere with audio it will not play on a pc only a mac. After extensive research I have narrowed down the problem to this: if you use the inspector in quicktime it looks like this
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
I have to run it thru AE to make it look like this....then it plays
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
SOOOO the problem is the Little/Big Endian. I googled that and it looks like a file/bit structure....anyone know how/why to change it in Premiere? Because everytime I make a movie in Prem I have to drag the sequence into AE and render it there so the sounds works.....
thanks

Two questions:
1. What CODEC are you choosing when exporting on the Mac?
2. Do you have any Blackmagic hardware/software installed?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Mail stops working with Exchange after VPN is launched and then stopped

Similar Messages

Maybe you are looking for