Mail struggles to load after ios 8

Anybody elses email struggling to load after ios 8 upgrade?

Hi ..
It's working fine on iOS 8 here.
Try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Similar Messages

  • TS2621 why my outgoing mail server not working after ios 6 upgraded

    why my outgoing mail server not working after ios 6 upgraded

    Ask your carrier to send you the settings over wifi and then install them that way.
    I'm on giffgaff and I used the giffgaff app from the store to sort this out.
    Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
    Very Poor indeed and I held off using Apple products for years for this very reason!!

  • My Mail will not work after ios 6 update on iPhone 4S

    My Mail will not load any emails after the iOS 6 update on my iPhone 4S. I have tried a hard reset, and deleting my email account from iPhone but neither works. My iPhone will delete the account but next time I go into settings, I see the account in there! I have no idea what to do, please help!

    My Mail will not load any emails after the iOS 6 update on my iPhone 4S. I have tried a hard reset, and deleting my email account from iPhone but neither works. My iPhone will delete the account but next time I go into settings, I see the account in there! I have no idea what to do, please help!

  • Mail app not starting after Ios 7

    After ios 7 update mail app is not starting. White background for 0.5sec and then back to homescreen. How do I odwngrde or is there some tip to get mail app up and running?

    Same problem with Safari browser..

  • Mail icon wont open after ios update on iphone 5

    After the IOS update today, my mail icon will not open and the screen seems to have lost sensitivity. Any suggestions? Thanks.

    Reset the phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears.

  • Mail not showing accounts after ios 7 update on iPhone 5

    After the ios 7 update to my iPhone 5 mail does not show my accounts. Specifically there is nothing below the word Accounts. The rest is working fine and still connected to my three accounts. However it no longer shows accounts.

    thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works.  i did all the steps but no luck.
    So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net. 
    With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera,  they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money.  im glad they didnt charge me for the new camera though as it still didnt work.
    anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware.  i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release.  not overly impressed with the whole process.
    i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2.  anyway will update if i get any further progress.

  • Mail showing blank screen after iOS 8.2 upgrade

    after upgading to iOS 8.2 today, my mail is showing what seems to be a blank gmail screen, then goes dark, then transparent. Not able to get any email.  Tried deleting gmail account,  still getting same screen.

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

  • MAIL failure to load after Lion upgrade - can't migrate data

    I've posted information in a different forum, but I think that thread is dead so I wanted to post a fresh issue.
    Here's the older post: https://discussions.apple.com/message/16615578#16615578
    Bascially, Mail won't migrate my data and it crashes before fully loading.
    Summary from other thread:
    - mail finishes inporting messages but then crashes when it hits the migration stage
    - same issue after a fresh install and as a fully updated version
    - did resert PRAM
    - tried tossing Envelope files
    - tried tossing V folder
    - I tried one work around to test it and it worked, but it's a BAD alternative. I can move my Mail folder out of my library and re-open Mail. This starts with a clean slate. I added my Exchange/IMAP account to test. I'm sure I can import mailboxes one at a time. But I tried moving my signatures and that doesn't work. I may to do this option, but I'm worried that I will lose all the rules I developed over the last 6-7 years (approx?) adn signatures for each account.
    - error log is on the link above
    I would appreciate some help on this issue before I manually add all my emails. I have 140,000 emails in many folders from the last 10 years and it's not something I want to lose or have disorganize (including rules/signatures).
    Partial ERROR LOG (from base install before updates):
    Process:         Mail [351]
    Path:            /Applications/Mail.app/Contents/MacOS/Mail
    Identifier:      com.apple.mail
    Version:         5.0 (1244.2)
    Build Info:      Mail-1244002000000000~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [154]
    Date/Time:       2011-11-03 09:08:18.361 -0400
    OS Version:      Mac OS X 10.7 (11A511s)
    Report Version:  9
    Interval Since Last Report:          2137 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  1991 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      D1F0E8E6-1C64-4F39-AE54-0E3E76A6B599
    Crashed Thread:  2  -[LibraryUpgrader run]  Dispatch queue: com.apple.root.default-overcommit-priority
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000010bd3cfd0
    VM Regions Near 0x10bd3cfd0:
        Stack                  000000010bcba000-000000010bd3c000 [  520K] rw-/rwx SM=COW  thread 1
    --> STACK GUARD            000000010bd3c000-000000010bd3d000 [    4K] ---/rwx SM=NUL  stack guard for thread 2
        Stack                  000000010bd3d000-000000010bdbf000 [  520K] rw-/rwx SM=COW  thread 2
    Application Specific Information:
    objc[351]: garbage collection is OFF

    Problem Solved!
    One of my mailboxes must have been corrupt in the migration phase or have some bad data.
    Here's what I did to fix my Mail:
    - all mail messages loading, but then it crashed during migration. This stage of the installation means that the "Envelope Index" file completes writing and a "V2-Temp.noindex" folder is created. This folder is used to build the mailbox environment.
    - I checked the V2temp folder to see what transfered before crash and found that one of my old IMAP accounts was only halfed transferred in the temp folder.
    - I tossed Envelope Index (and other "Envelope" named files) and V2-Temp.noindex into the trash
    - I tossed the problem IMAP folder in the trash too (well actually to the desktop)
    - I tossed out all the CalDAV crap.
    - I relaunched and the folders, emails, signatures, rules, accounts all migrated properly after the mail databasr was imported to the new folder "V2"!
    - A "Mail Lost+Found" folder was also created that I havent investigated yet.
    Coming up next:
    - a full backup of Mail!

  • Mail app crashes constantly after iOS 7

    Updated 6.1.3 to 7.0 and native Mail now crashes to home screen anywhere from 0 - 5 seconds after loading, sometimes while the screen is still white (loading) and sometimes a few seconds after I can see and temporarily navigate my mailboxes. Was working fine before - Anyone else have this issue or know how to resolve? Apple, are you aware of this / fixing?
    No, I will not restore a backup or reset to factory settings - these solutions are unnacceptable for many reasons.

    Try quitting Mail like I describe below then reset your phone.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.
    Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Mail refuses to load after Lion.

    Tried loading Mail and got dialog that said I needed to upgrade Mail messages etc. Started upgrading database then quits. In trying to reload I get a "Restore Windows" dialog that just results in spinning beach ball.
    Mac Pro Mac OS X 10.7

    Similar problem here too. Allowed Mail to upgrade messages and then it failed to show the message viewer after it completed.
    I quit Mail. Restarted it. The application menu bar appears, but when I click on Window, Message Viewer, the message viewer doesn't appear. I've checked my spaces and can't see the main message viewer anywhere.
    If I click on File, New Message, however, a new message window does appear. But if I click on File, New Viewer Window, the spinning beachball appears, Mail hangs, and I have to force quit.
    I tried rebooting - that didn't help either.
    Good job I have Sparrow Mail installed as a backup client.

  • Web pages do not load after ios 6

    My iPod touch received the IOS 6 update Thursday night and since then I can not load any web sites in Safari!  It will sit there spinning for a while and then I get a message "Safari could not open the page because the server stopped responding."  I have gotten this same behavior when connected to my own network at home as well as the network at work. The network connection itself looks ok based on the signal strength bars. 
    Any suggestions on what's worng?
    Is there any way to revert to the previous IOS version?

    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings

  • Mail failing to load after 10.8.1 update

    My mail client refuses to open after updating last night.  The system error is
    *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Could not create ~/Library/Containers/com.apple.mail/Data/Library/_ˇˇˇ/f«/
    Any one else having problems?

    If the printer is connected to the Mac via USB cable and you do not see it in the Default Add Printer view when you try to add it, then it could be the USB cable at fault. So if you have another USB printer cable then try this.
    If the Mac still fails to see the HP then open System Information (Applications > Utilties) and in the left column, select the USB entry. The top right pane will show all the USB connections in your Mac. The HP should be visible in this list.
    If the printer is not connecting to the Mac via USB but via wireless, then I believe for HP you do have to rely on the HP Software to add a network printer. So maybe check their web site for a later version of this network utility, as the one that came with the printer is probably not compatible with 10.8.

  • Mail still not loading after Mavericks update

    I've been waiting for an update to Mavericks because I hadn't been able to launch Mail since upgrading from Snow Leopard.  (I use several Gmail accounts and the "All Mail" trick suggested a couple weeks ago didn't apply to me.)  So, yesterday I downloaded the new version.  Unfortunately, the same thing is happening; when I click on Mail, a series of information windows open - "Upgrading your Mail database…", "Identifying message conversations…", "Optimizing your Mail database…" - and then whatever window is displayed at the moment disappears and nothing else happens.  Mail does NOT open.  Still.  I can't use an OS if it doesn't support an e-mail program.
    Are others still locked out of Mail in Mavericks?  More importantly, does anyone have a fix?  Is Apple still working on bugs in this program?  If not, I'm stuck at 10.6.8.

    To see your user library, either hold down the option key while using the Finder “Go To Folder” command
    and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail.
    If you prefer to make your User library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Mail font not loading after OSX upgrade

    The recipient header name font isn't loading properly in the main pane, even though the same font is used within the message. It's impossible to see who the message is from as it is showing as unicode random letters and numbers. If I click on the message the name shows fine. Help!

    Hi Tom
    Thanks so much for responding. I have done a safe reboot and it seems to have fixed the problem, whatever it was?!

  • I4 push mail doesn't work after update

    My I4 push mail doesn't work after iOS 5 update. I have a mobileme acct and the settings show mail set up for push. Any thoughts?

    Hello amishnik,
    Thank you for your question regarding email on your BlackBerry PlayBook tablet.
    Have you restarted the device and verified that the device is still connected to Wi-Fi? Are you able to browse the internet? If not, try this and let us know the results including any error messages.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

Maybe you are looking for

  • Apple graphic card replacement

    Hi, I own mid 2011 iMac 3,4 i7 model with 6790 2GB graphic card which is broken. Found Apple replacement program for those cards : http://9to5mac.com/2013/08/16/apple-opens-graphics-card-replacement-program-for- some-mid-2011-imacs/ Can someone tell

  • Problem with multiple versions of documents being published with 001, 002, etc.

    I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute

  • Performance FDM mapping

    Hi Guys, My FDM App has a Map Options for a Dimension where the type is "In" with these features: Rule Name: RNOME Rule Desc: Rule Definition:[None] Target Custom 2:#SCRIPT Script: if (RES.PlngCatKey="14") then 'escenario Saldos medios if (VarValues(

  • How much would it cost to replace the IC chip for an Iphone 4s?

    How much would it cost to replace the IC chip for an Iphone 4s?

  • Class.forName(..) mood changes...

    Howdy, I'm running an app from a application server and when i process this code : Class c = Class.forName("oracle.portal.provider.v2.render.PortletRenderRequest"); java.lang.reflect.Method m[] =  c.getDeclaredMethods(); for (int i = 0; i < m.length;