Mail stuck in "Mailbox Database ..." queue

Hi guys
In our organization we have an Exchange Server 2013 CU6 with both server roles CAS and Mailbox installed (absolutely fresh deployment). Users from AD have successfully been assigned mailboxes. The authoritative domain of the server is set correctly to our
local domain. The DNS MX record to the Exchange-host exists and works well (tested with nslookup and setting q=MX). For testing purposes all the receive connectors allow connections from anonymous users.
I've tried to send an SMTP mail via telnet connecting to CAS via port 25. The connection is established and the sender and receiver are accepted by the server but when I submit the message (line containing only a single a full stop) I get the error:
451 4.7.0 Temporary server error. Please try again later. PRX2
I have sent the same massage to the Transport Service on the Mailbox Server via port 2525 and the message was accepted, but it was not delivered to the mailbox of the recipient. Instead it just got stuck in a queue named "Mailbox Database ...".
Its status is "Ready".
I have restarted all possible services and rebooted the system but that did not help. Do you have any idea what could be the matter? Thank you!
Cheers Dimitri

Hi JCvanDamme,
I recommend you refer to the following article and it may give you some hints :
http://blog.kloud.com.au/2013/11/22/exchange-2013-dns-settings-cause-transport-services-to-crash/
Note: Microsoft is providing this information as a convenience to you. The sites are
not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from
the above link.
Best regards,
Niko Cheng
TechNet Community Support

Similar Messages

  • Inbound emails from internet stuck in smtp database queue

    I have 4 exchange servers
    2 MBX and 2 CAS.
    I am forwarding the smtp request from firewall to cas02 and using cas01 as stand by.
    Email are working fine except some time when we look at the email queue emails get queued n smtp database. And it take very long time to route to user mailbox.
    My mailbox in the DAG.
    When I checked in the Active Directory DNS MX record pointing to cas01 and cas02

    Hi mswizard,
    Thank you for your question.
    How long time to route user mailbox?
    When did the email get queued? The specific or random a period of time?
    Email got queued comes from the specific domain or all external domain?
    In order to troubleshooting, when the email gets queued, we could collect the following information to
    [email protected]
    The application logs on Exchange server ;
    The System logs on Exchange server;
    Message tracking logs on Hub server in the following path:
    C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\MessageTracking
      4. SMTP logs on the Hub server  in the following path:
    C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ProtocolLog\SmtpReceive
    There are some reasons which may cause email queued for long time to delivery:
    Network issue
    Make sure no loop in network and other network issues.
      2. Exchange server performance
    The Exchange server didn’t deal with many emails at the same time owing to performance, we could improve the performance of the Exchange server. We could use
    performance monitor in EMC to check.
      3. Anti-virus software
    We could try to disable A/V to check if the problem that email is delivering to user mailbox persists for a long time.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim

  • Mailbox recipient does not have a mailbox database

    For one of our customers we are currently working on a prove of concept to implement on premise exchange servers. The problem mentioned below takes place on test servers.
    Server names and mail domain names are changed to generic values.
    On our on premise exchange environment we encounter the following problems when emailing to a specific email domain .
    Email to the domain companyname.com is placed in to the Unreachable Domain queue with the following error:
    Last Error: The mailbox recipient does not have a mailbox database
    Queue ID: SERVEREX01\Unreachable
    Recipients:  [email protected];2;3;The mailbox recipient does not have a mailbox database;1;<No Home Database>
    Situation:
    Customer uses a local Active Directory which contains all the user accounts and uses Office 365 / Exchange Online to provide these users with a mailbox. SSO between the local AD and O365 is provided by a third party identity provider.
     Dirsync is used to sync all user information from the local AD to O365 AD. This also includes the SMTP addresses users have on the Office 365 mailbox. In the local AD this information is saved is the proxyaddress attribute field and synced
    to O365. Office 365 uses the following mail domains for customer: companyname.com and companyname.onmicrosoft.com.
    Customer wants to use local on premise exchange servers for specific locations and users and doesn’t want to implement a hybrid exchange environment. Therefore we installed an Exchange 2010 Edge server in the DMZ and an Exchange 2013 MBX
    / CAS server in the server network. The Exchange 2013 server is installed in the same Active Directory as the one mentioned above. This environment uses the mail domain @central.companyname.com. The email environment is configured to only accept email for
    this domain.
    The email environment works fine. It can send and receive email internally and externally. There is only one issue. It’s impossible to send email from the on premise environment to office 365. The other way around (O365 to on premise)
    works fine.
    When an email is send to a companyname.com email address the exchange 2013 mail server places the email in the Unreachable Domain queue and reports 
    the following error:
    Last Error: The mailbox recipient does not have a mailbox database
    Queue ID: SERVEREX01\Unreachable
    Recipients:  [email protected];2;3;The mailbox recipient does not have a mailbox database;1;<No Home Database>
    This is caused by the fact that the @companyname.com email addresses are stored in the active directory exchange uses. We tried to fix this problem to create a internal and external relay domain with the appropriate send connector but
    this didn’t help.
    When we remove the proxyaddress attribute in the local active directory we are able to send email from the on premise exchange server to Office365. Removing the proxyaddresses is not a solution because these settings will be synced to
    Office 365 and users can’t receive email anymore in there cloud mailbox.
    It looks like the SMTP Categorizer first looks in active directory if the target email addresses is available. If so it will send the email to this users (but doesn’t have a mailbox server and mailbox database).
    Can we configure a working mailflow for email from on premise to Office 365 for @companyname.com addresses?

    Hi,
    Please try to set the target Address from the on premise AD account in ADSIedit to match the Cloud mailbox address, and then check the result.
    In addition, I recommend you post this thread on office 365 forum:
    http://community.office365.com/en-us/forums/default.aspx
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Mails stuck in queue when Automatic Replies are enabled

    We have a new Exchange 2013 server and moved a few pilot users from the 2010 environment to it.
    Everything seems to work OK but we just encountered a strange issue. One of the users turned on his automatic out of office replies and when people send E-mail to his mailbox they receive a 'Delivery delayed' e-mail. All mails to this account seem to be
    stuck in the queue (shown in the Exchange Toolbox – Queue viewer) but they DO actually arrive in his Outlook.
    The error message in the queue for his messages is: Recipients:  [email protected];3;3;[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};
     After turning off his out of office replies, the queue emptied instantly, and no duplicate mails arrived in his mailbox. After turning it back on the queue started filling up again with new mails.
    Other pilot users have the same issue.
    Has anybody seen this issue before? I checked space on the drives and there seems to be no issue there (so no back pressure issue).
    thanks!

    We opened a case with Microsoft support. It took a few weeks for them to find what was causing this issue. I will just copy/paste the summary they gave us.
    Reason:
    So the error was thrown by the Transport Service when we are trying to submit the mail.
    We also compared the difference between earlier version and CU5 and found “XORIGFROM=[email protected]” is the difference, we started using XORIGFROM verb from CU5.
    We did further analysis and found During SMTP Session, we check if the XOrigFrom argument is allowed according to EHLO, capabilities and permissions. 
    While checking this permission, we check if the session has permission to accept organization headers, and this is where we are failing. 
    # we checked the effective permission for "Mailservername" on Default receive connector and found that we had "deny" permission on: Accept Organization headers
    # We also found that the security group "Exchangelegacyinterop" had deny permission for "accept organization headers" on the default receive connector 
    # We found that the Exchange server "Mailservername" was a member of "Exchangelegacyinterop"
    # So we removed the "Exchangelegacyinterop" and added the "Mailservername"
    # we gave "Allow" permission on "Accept organization headers"
    # we restarted the MSExchange Transport service
    # We sent an test email to the OOF enable mailbox 
    # we found that we got the OOF reply and also the email did not stuck in the queue
    # Issue resolved

  • In mail, after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.

    In 'mail', after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.
    I converted my mail boxes from POP to imap for the purpose of syncing all my devices. I backed up my mail boxes and further more perfomed a timemachine backup.
    Upon restoring ther mailboxes, either by manually copying them to the mailboxes folder, and restoring a timemachine backup, both pocesses result in the above problem.
    Please recomend a solution.
    file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.48.10 %20PM.png
    file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.38.30 %20PM.png

    Can anyone out there please help!

  • Shared mailbox sent mail stuck in Outbox of user outlook.

    User as full and send as permission to Shared mailbox, when user try to send as mail from shared mailbox mails get stuck in shared mailbox outbox.

    Hi,
    From your description, I recommend you run your Outlook in cached mode and click the Send/Receive to check whether the message can be sent. I have seen that this method works for some people.
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • What to do with mail stuck in mail queue?

    I think i have my web and e-mail server running fine, all mail from the users is coming and going as should. But I have to delete the mail queue every two days or so because it is filling up with junk mail to unknown senders and users. I think everting is setup correct and I do not have an open relay, but is there some way I can have it delete the junk mail in this queue by itself?

    Most likely you have postfix configured to accept any mail. Being for known or unknown users. Thus, mail for unknown users (mostly spam) gets only bounced at a later stage (cyrus/IMAP), which in turn creates those pesky Mailer-Daemon messages in your queue.
    Being spam, there is usually no proper return address, so those messages stay in your queue, until they expire after 5 days (default value).
    See my tutorial on how to improve Postfix' configuration here: http://osx.topicdesk.com/content/view/38/62/

  • There is currently no route to the mailbox database.;2;MailboxDB;0

    Hi,
    I have multiple mailbox servers. We are receiving emails from Gmail, Yahoo, etc.
    The issue is that some users from outside (their own domain) are sending emails and their emails are stuck in a queue named
    Server\Unreachable
    After trying it rejects the email and users are getting this error message.
    #<#4.4.7 smtp;550 4.4.7 QUEUE.Expired; message expired in unreachable destination
    queue. Reason: There is currently no route to the mailbox database.> #SMTP#<o:p></o:p>
    Can any one please help us in this regard?
    Regards,
    Anees

    Hi,
    According to your description, I understand that some domain cannot send message and return an NDR “550 4.4.7 QUEUE.Expired; message expired in unreachable destination queue.”
    If I misunderstand your concern, please do not hesitate to let me know.
    I want to double confirm whether all account or some special account contain this domain experience this question, how about internal and external mail flow?
    If this issue only occur on some special recipient, it indicate that target domain may be configured to reject your message, I recommend to contact its administrator to change the setting.
    Otherwise, please try to enable protocol log to get more details about this issue. More details about
    Protocol logging, for your reference:
    https://technet.microsoft.com/en-us/library/aa997624(v=exchg.150).aspx
    Best Regards,
    Allen Wang

  • Load balancing failed to find a valid mailbox database.

    While trying to create new mailbox, the following message is displayed:
    "Load balancing failed to find a valid mailbox database."
    If database is manually selected, there are no problems.
    I've checked this:
    Get-mailboxdatabase | ft name,isexcludedfromprovisioning
    Name                                                                                        
    IsExcludedFromProvisioning
    MAILBOX01                                                                                                        
    False
    MAILBOX02                                                                                                        
    False
    MAILBOX03                                                                                                        
    False
    MAILBOX04                                                                                                        
    False
    Get-MailboxDatabase –Status | FT Name, Mounted
    Name                                                                                                           
    Mounted
    MAILBOX01                                                                                                         
    True
    MAILBOX02                                                                                                         
    True
    MAILBOX03                                                                                                         
    True
    MAILBOX04                                                                                                         
    True

    Willard Martin:
    Get-mailboxdatabase | ft name,issuspendedfromprovisioning
    Name                                                                                       
    IsSuspendedFromProvisioning
    MAILBOX01                                                                                                        
    False
    MAILBOX02                                                                                                        
    False
    MAILBOX03                                                                                                        
    False
    MAILBOX04                                                                                                        
    False
    PK M:
    This is Output for: Get-ManagementRoleAssignment -RoleAssignee <UserCreatingMailboxes>
    Name                           Role              RoleAssigneeName 
    RoleAssigneeType  AssignmentMethod  EffectiveUserNam
    e
    View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup         RoleGroup         All Group Mem...
    UnScoped Role Management-Or... UnScoped Role ... Organization M... RoleGroup         RoleGroup         All Group Mem...
    MyDiagnostics-Organization ... MyDiagnostics     Organization M... RoleGroup         RoleGroup         All Group Mem...
    Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Mail Recipients-Organizatio... Mail Recipients   Organization M... RoleGroup         RoleGroup         All Group Mem...
    Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup         RoleGroup         All Group Mem...
    MyTextMessaging-Organizatio... MyTextMessaging   Organization M... RoleGroup         RoleGroup         All Group Mem...
    Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Organization Client Access-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup         RoleGroup         All Group Mem...
    MyProfileInformation-Organi... MyProfileInfor... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Exchange Servers-Organizati... Exchange Servers  Organization M... RoleGroup         RoleGroup         All Group Mem...
    Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup         RoleGroup         All Group Mem...
    User Options-Organization M... User Options      Organization M... RoleGroup         RoleGroup         All Group Mem...
    Audit Logs-Organization Man... Audit Logs        Organization M... RoleGroup         RoleGroup         All Group Mem...
    Database Copies-Organizatio... Database Copies   Organization M... RoleGroup         RoleGroup         All Group Mem...
    View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Message Tracking-Organizati... Message Tracking  Organization M... RoleGroup         RoleGroup         All Group Mem...
    Migration-Organization Mana... Migration         Organization M... RoleGroup         RoleGroup         All Group Mem...
    Move Mailboxes-Organization... Move Mailboxes    Organization M... RoleGroup         RoleGroup         All Group Mem...
    Move Mailboxes-Organization... Move Mailboxes    Organization M... RoleGroup         RoleGroup         All Group Mem...
    Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Migration-Organization Mana... Migration         Organization M... RoleGroup         RoleGroup         All Group Mem...
    View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Database Availability Group... Database Avail... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Database Copies-Organizatio... Database Copies   Organization M... RoleGroup         RoleGroup         All Group Mem...
    Monitoring-Organization Man... Monitoring        Organization M... RoleGroup         RoleGroup         All Group Mem...
    View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Transport Agents-Organizati... Transport Agents  Organization M... RoleGroup         RoleGroup         All Group Mem...
    Support Diagnostics-Organiz... Support Diagno... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup         RoleGroup         All Group Mem...
    Transport Rules-Organizatio... Transport Rules   Organization M... RoleGroup         RoleGroup         All Group Mem...
    Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Address Lists-Organization ... Address Lists     Organization M... RoleGroup         RoleGroup         All Group Mem...
    Message Tracking-Organizati... Message Tracking  Organization M... RoleGroup         RoleGroup         All Group Mem...
    Role Management-Organizatio... Role Management   Organization M... RoleGroup         RoleGroup         All Group Mem...
    Information Rights Manageme... Information Ri... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Legal Hold-Organization Man... Legal Hold        Organization M... RoleGroup         RoleGroup         All Group Mem...
    POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Retention Management-Organi... Retention Mana... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Send Connectors-Organizatio... Send Connectors   Organization M... RoleGroup         RoleGroup         All Group Mem...
    MyDistributionGroups-Organi... MyDistribution... Organization M... RoleGroup         RoleGroup         All Group Mem...
    Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Database Availability Group... Database Avail... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mail Tips-Organization Mana... Mail Tips         Organization M... RoleGroup         RoleGroup         All Group Mem..
    Security Group Creation and... Security Group... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup         RoleGroup         All Group Mem..
    E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Public Folder Replication-O... Public Folder ... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Monitoring-Organization Man... Monitoring        Organization M... RoleGroup         RoleGroup         All Group Mem..
    Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup         RoleGroup         All Group Mem..
    Public Folders-Organization... Public Folders    Organization M... RoleGroup         RoleGroup         All Group Mem..
    Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup         RoleGroup         All Group Mem..
    User Options-Organization M... User Options      Organization M... RoleGroup         RoleGroup         All Group Mem..
    Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Retention Management-Organi... Retention Mana... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Journaling-Organization Man... Journaling        Organization M... RoleGroup         RoleGroup         All Group Mem..
    Transport Rules-Organizatio... Transport Rules   Organization M... RoleGroup         RoleGroup         All Group Mem..
    Organization Transport Sett... Organization T... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Public Folders-Organization... Public Folders    Organization M... RoleGroup         RoleGroup         All Group Mem..
    Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup         RoleGroup         All Group Mem..
    View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Journaling-Organization Man... Journaling        Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mail Tips-Organization Mana... Mail Tips         Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mail Recipients-Organizatio... Mail Recipients   Organization M... RoleGroup         RoleGroup         All Group Mem..
    Audit Logs-Organization Man... Audit Logs        Organization M... RoleGroup         RoleGroup         All Group Mem..
    Transport Queues-Organizati... Transport Queues  Organization M... RoleGroup         RoleGroup         All Group Mem..
    Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup         RoleGroup         All Group Mem..
    POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Organization Configuration-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem..
    MyBaseOptions-Organization ... MyBaseOptions     Organization M... RoleGroup         RoleGroup         All Group Mem..
    Transport Agents-Organizati... Transport Agents  Organization M... RoleGroup         RoleGroup         All Group Mem..
    View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Legal Hold-Organization Man... Legal Hold        Organization M... RoleGroup         RoleGroup         All Group Mem..
    Send Connectors-Organizatio... Send Connectors   Organization M... RoleGroup         RoleGroup         All Group Mem..
    Transport Queues-Organizati... Transport Queues  Organization M... RoleGroup         RoleGroup         All Group Mem..
    E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Active Directory Permission... Active Directo... Organization M... RoleGroup         RoleGroup         All Group Mem..
    ApplicationImpersonation-Or... ApplicationImp... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Address Lists-Organization ... Address Lists     Organization M... RoleGroup         RoleGroup         All Group Mem..
    Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup         RoleGroup         All Group Mem..
    Databases-Organization Mana... Databases         Organization M... RoleGroup         RoleGroup         All Group Mem..
    Exchange Servers-Organizati... Exchange Servers  Organization M... RoleGroup         RoleGroup         All Group Mem..
    UM Mailboxes-Organization M... UM Mailboxes      Organization M... RoleGroup         RoleGroup         All Group Mem..
    Active Directory Permission... Active Directo... Organization M... RoleGroup         RoleGroup         All Group Mem..
    UM Mailboxes-Organization M... UM Mailboxes      Organization M... RoleGroup         RoleGroup         All Group Mem..
    Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Organization Configuration-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem..
    MyContactInformation-Organi... MyContactInfor... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mailbox Search-Organization... Mailbox Search    Organization M... RoleGroup         RoleGroup         All Group Mem..
    Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup         RoleGroup         All Group Mem..
    MyDistributionGroupMembersh... MyDistribution... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Information Rights Manageme... Information Ri... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mailbox Import Export-Organ... Mailbox Import... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Security Group Creation and... Security Group... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Organization Client Access-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Role Management-Organizatio... Role Management   Organization M... RoleGroup         RoleGroup         All Group Mem..
    UM Prompts-Organization Man... UM Prompts        Organization M... RoleGroup         RoleGroup         All Group Mem..
    Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Public Folder Replication-O... Public Folder ... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup         RoleGroup         All Group Mem..
    UM Prompts-Organization Man... UM Prompts        Organization M... RoleGroup         RoleGroup         All Group Mem..
    MyRetentionPolicies-Organiz... MyRetentionPol... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Databases-Organization Mana... Databases         Organization M... RoleGroup         RoleGroup         All Group Mem..
    Organization Transport Sett... Organization T... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup         RoleGroup         All Group Mem..
    Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup         RoleGroup         All Group Mem..
    MyVoiceMail-Organization Ma... MyVoiceMail       Organization M... RoleGroup         RoleGroup         All Group Mem..
    Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup         RoleGroup         All Group Mem..
    Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup         RoleGroup         All Group Mem..
    MyMailboxDelegation-Organiz... MyMailboxDeleg... Organization M... RoleGroup         RoleGroup         All Group Mem..
    Mail Enabled Public Folders... Mail Enabled P... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Recipient Policies-Recipien... Recipient Poli... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Distribution Groups-Recipie... Distribution G... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Message Tracking-Recipient ... Message Tracking  Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Mail Recipient Creation-Rec... Mail Recipient... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Migration-Recipient Management Migration         Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Move Mailboxes-Recipient Ma... Move Mailboxes    Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Mail Recipients-Recipient M... Mail Recipients   Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
    Monitoring-View-Only Organi... Monitoring        View-Only Orga... RoleGroup         RoleGroup         All Group Mem..
    View-Only Configuration-Vie... View-Only Conf... View-Only Orga... RoleGroup         RoleGroup         All Group Mem..
    View-Only Recipients-View-O... View-Only Reci... View-Only Orga... RoleGroup         RoleGroup         All Group Mem..
    Public Folders-Public Folde... Public Folders    Public Folder ... RoleGroup         RoleGroup         All Group Mem..
    Mail Enabled Public Folders... Mail Enabled P... Public Folder ... RoleGroup         RoleGroup         All Group Mem..
    MyDistributionGroupMembersh... MyDistribution... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
    MyTextMessaging-Default Rol... MyTextMessaging   Default Role A... RoleAssignment... RoleAssignment... All Policy As..
    MyContactInformation-Defaul... MyContactInfor... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
    MyVoiceMail-Default Role As... MyVoiceMail       Default Role A... RoleAssignment... RoleAssignment... All Policy As..
    MyBaseOptions-Default Role ... MyBaseOptions     Default Role A... RoleAssignment... RoleAssignment... All Policy As..
    I've tested functionality with other admin-accounts and they have the same roles and same behavior. There have been no changes in roles or other Exchange settings as far as I know.

  • Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'

    I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
    two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
    Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
    Data migrated:                        
    Migration rate:                        
    Error:                        
    MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. ‎(hr=0x80040115, ec=-2147221227)‎ Diagnostic
    context:    ......    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam:
    0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode  string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode  string: <Server
    FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 45169   StoreEc: 0x824        
    Lid: 50544   ClientVersion: 15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 44273      Lid: 49064   dwParam: 0x1    Lid: 37288  
    StoreEc: 0x6AB         Lid: 49064   dwParam: 0x2    Lid: 59431   EMSMDB.EcDoConnectEx called [length=203]    Lid: 51239   EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]   
    Lid: 62184      Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 3460    Lid: 12696   dwParam: 0x0 Msg: EEInfo:
    Generation Time: 0414-04-07T16:32:03.2100000Z    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 2    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1753    Lid: 9624   
    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856   
    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode  string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode  string: <Server FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo:
    prm[2]: Long val: 2767313664    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 59505   StoreEc: 0x824         Lid: 50544   ClientVersion:
    15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 36081      Lid: 51152      Lid: 52465   StoreEc: 0x80040115   
    Lid: 60065      Lid: 33777   StoreEc: 0x80040115    Lid: 59805      Lid: 52487   StoreEc: 0x80040115    Lid: 19778      Lid: 27970  
    StoreEc: 0x80040115    Lid: 17730      Lid: 25922   StoreEc: 0x80040115
    All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
    The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
    The Source Server is Running Exchange 2007.
    I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
    I would appreciate any help you can give me!
    Thanks,
    Jon

    Any update if you have resolved the issue.
    Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required

  • Healthy copy of mailbox Database in DAG acting as a seeding source for another Healthy copy Database in DAG

    Overview of the architecture
    We have Site (Primary & DR)
    2 Database copies in primary site and 1 Database on the DR site (Primary site 2 copies one mounted and second healthy & on the DR site one healthy copy of Database)
    Recently Due to Network Problem the DR copy got in to the easyncronous state and was removed from the DAG.
    As company does not want the downtime we have followed the below steps to Restore Database at DR site.
    1)Stopped the backup to Not trucate the log file
    2)Took Full backup and in the restore mode we shipped the full backup to the DR site.
    3)As the above process needs 2 days, manually copied the some Logs to the DR site (IN some drive as much possible to reduce seed time)
    4)Added the mailbox database of the DR site back in the DAG as its seeds from the start, we manually suspend the process post the Database folder hierrachy  gets created
    5)Added the EDB and logs files in the recently created folders
    6)Resumed the Database seed, so only the remaining logs were copied and seeded from primary site to DR site, In some hours DR site databse became healhty with no copy queue and replay queue.
    7)trucated the logs which synced using DAG
    Now Dag has copies as initial setup but the since we followed the above process the primary site healthy copy is acting as the seed-source and logs not truncating for the database
    When restarts the Replication services on the Primary site server with healthy the state becomes healthy but again after some time it becomes seed- source.
    Wanted to know when DR site copy is in healthy state why its acting as a seed-source continueously
    Need Experts advice in manage Database copies in healthy state...
    Thanks in Advance

    Hi,
    Based on your description, sometimes the content index state of passive database copy in primary site is healthy, but sometimes the state is crawling.
    You can use the following command to reseed the catalog only to check result.
    Update-MailboxDatabaseCopy -Identity Database -SourceServer EX -CatalogOnly
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Mailbox database Size

    Hi,
       I have DAG enabled Exchange Server 2010 installed with three mailbox databases having sizes 282GB,162GB and 129GB respectively. I have started with a total of 250GB in 2010 and now it has reached a size more than 650GB.
       It has become very difficult to take the backup of such huge database files now and restoring it in case of a DR.
       Presently I have not enabled online archiving in any of these mailboxes mainly because most of the PCs are installed with outlook 2007 which doesn't show online archive.Of course OWA is another candidate to see those mails.
       Please suggest a best practice to reduce the size of these mailbox databases without losing any of the mails.
    Thanks
    Thomas

    As mentioned above, Exchange database files do not shrink.  
    If you do a defrag, then since you have copies of this DB in the DAG then you have to reseed.  take a look at this
    http://blogs.technet.com/b/rmilne/archive/2013/08/23/offline-defrag-and-dag-databases_2c00_-oh-my_2100_.aspx
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Exchange 2013 CU2 - Mailbox Databases and Active Sync - update when new item arrive

    Hi,
    Maybe it will be a silly question but I don't know what exactly is going on. We are running Ex2013CU2 Evironment (1 CAS, 2 MBX Servers with 4 Mailbox Databases).
    User mailboxes are in MDB01 and they are allowed to connect to mail via activesync and everything is working great (I mean that auto notification on mobile when item arrive is working).
    When we move user mailbox to another database ex. MDB02 -> "auto notification when item arrive" does not working, but manual synchronization is working great.
    Does anyone have any idea why it is behaving like this or what should I check to fix this ?
    Thanks.
    -- Kamil Tatar

    are you saying PUSHMAIL is not working after moving the mailbox to a different database?
    Where Technology Meets Talent

  • Exchange 2010: Remove high available mailbox database error

    Hello everyone,
    I have a two node DAG exchange 2010 and recently split one mailbox database into two databases. 
    Now when removing the original database I get the following error:
    Please provide specific details.
    The following was done thus far:
    Deleted all softdeleted items
    this is not the default mailbox database
    Suspended the second mail server and removed it from mailbox, leaving now just one mail server attached to the mailbox database.
    Help

    Try to check mailbox import request is there or no by this command. Get-MailboxImportRequest. If you can see any requests listed. Remove it by this command Get-MailboxImportRequest | Remove-MailboxImportRequest.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Exchange 2010 - Moving mailbox database from exchange 2010 server to another exchange 2010 server

    Hi,
    I have a current existing exchange server running on 2008 R2. apparently the partition that holds the mailbox database is getting full and i need to move some user mailboxes to another environment ( exchange 2010 running on 2008 R2). i transferred some users
    successfully to the new location, but am not able to transfer the rest. I am getting the errors:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:00:00
    Erastus XXXXX
    Failed
    Error:
    The queue in 'MBX2010_STAFF' database already contains a move request for 'Erastus XXXXX', while AD reports the mailbox as not being moved. It is possible that someone created this move request recently, while targeting a different domain controller, and AD
    replication did not yet occur. You can examine this move request by running 'Get-MoveRequestStatistics -MoveRequestQueue 'MBX2010_STAFF' -MailboxGuid f8023bc7-9d65-4194-9f6b-10e4780558b5 -IncludeReport | fl'. If you believe this to be an abandoned move request,
    you can remove it by running 'Remove-MoveRequest -MoveRequestQueue 'MBX2010_STAFF' -MailboxGuid f8023bc7-9d65-4194-9f6b-10e4780558b5'.
    Exchange Management Shell command attempted:
    'xxxxxxxx.co.ke/Training Department/XXXXXXX/XXXXXXX/Erastus XXXXX' | New-MoveRequest -TargetDatabase 'OFFICE_STAFF_MB_DB' -BadItemLimit '0'
    Elapsed Time: 00:00:00
    AND
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:00:01
    George XXXXX
    Failed
    Error:
    Service 'net.tcp://win-u5bjh2oamaa.xxxxxxxxx.co.ke/Microsoft.Exchange.MailboxReplicationService' encountered an exception. Error: MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
    Diagnostic context:
        Lid: 18969   EcDoRpcExt2 called [length=207]
        Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
        Lid: 32881   StoreEc: 0x80070005
        Lid: 50035 
        Lid: 64625   StoreEc: 0x80070005
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 56503 
        Lid: 12716   StoreEc: 0x80070005
        Lid: 20794 
        Lid: 28474   StoreEc: 0x80070005
        Lid: 22330   dwParam: 0x0        Msg: 14.01.0270.001:CPLSERVER
        Lid: 1750    ---- Remote Context End ----
        Lid: 23354   StoreEc: 0x80070005
        Lid: 25913 
        Lid: 21817   ROP Failure: 0x80070005
        Lid: 26297 
        Lid: 16585   StoreEc: 0x80070005
        Lid: 32441 
        Lid: 1706    StoreEc: 0x80070005
        Lid: 24761 
        Lid: 20665   StoreEc: 0x80070005
        Lid: 25785 
        Lid: 29881   StoreEc: 0x80070005
    Exception details: MapiExceptionNoAccess (80070005): MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
    Diagnostic context:
        Lid: 18969   EcDoRpcExt2 called [length=207]
        Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
        Lid: 32881   StoreEc: 0x80070005
        Lid: 50035 
        Lid: 64625   StoreEc: 0x80070005
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 56503 
        Lid: 12716   StoreEc: 0x80070005
        Lid: 20794 
        Lid: 28474   StoreEc: 0x80070005
        Lid: 22330   dwParam: 0x0        Msg: 14.01.0270.001:CPLSERVER
        Lid: 1750    ---- Remote Context End ----
        Lid: 23354   StoreEc: 0x80070005
        Lid: 25913 
        Lid: 21817   ROP Failure: 0x80070005
        Lid: 26297 
        Lid: 16585   StoreEc: 0x80070005
        Lid: 32441 
        Lid: 1706    StoreEc: 0x80070005
        Lid: 24761 
        Lid: 20665   StoreEc: 0x80070005
        Lid: 25785 
        Lid: 29881   StoreEc: 0x80070005
    Exchange Management Shell command attempted:
    'xxxxxxxxxx.co.ke/Training Department/xxxxxx/xxxxxxx/George xxxxxxx' | New-MoveRequest -TargetDatabase 'OFFICE_STAFF_MB_DB' -BadItemLimit '0'
    Elapsed Time: 00:00:01
    I have all the proper rights.
    YOUR ASSISTANCE WILL BE HIGHLY APPRECIATED. THANX :)

    0x80070005 is pretty standard access denied entries.  I would start digging into ACLs on a handful
    of mailboxes.
    Is there another Admin that can give it a shot to test their permissions vs yours?
    - If you find my post to be helpful, or the answer, please mark it appropriately. Thank you.
    Chris Ream

Maybe you are looking for