Mail system with sender information

Dear All,
Can anyone help me in finding a function module which sends a mail to an external system and also gives the SENDER and RECEIVER information?

Hi Jacob,
Check the link below.
https://www.sdn.sap.com/irj/sdn/forumsearch
<b><REMOVED BY MODERATOR></b>
Regards,
Harini.S
Message was edited by:
Alvaro Tejada Galindo

Similar Messages

How to cooperate the current mail system with Sun Java Commnication Suite 5

Dear all and Shane,
Excuse me for bothering you again.
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5. I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5.
My plan is as following
1. Sun Java Communication suites 5 server ( I called it comms5 ) will be in DMZ zone and will open the necessary ports in firewall.
2. I will create more than six sub domain name in Sun Delegate server and the necessary accounts within these domain names.
3. All messages will be transmitted via Postfix and clients will retrieve from Courier-IMAP
4. All Clients included other branch offices will use different mail clients to share their calendars, contacts via COMMS5 ( But how will COMMS handle the messages such like invitation ? )
Any suggestions will appreciate.
PS: Is it possible to classify the contacts in outlook address book ?
For example, when user click the receiver, it will show like as following
GLOBAL ADDRESS BOOK
--Director
--and so on
----CN.BRANCH OFFICE
-----------CN01 EMAIL ADDRESS
-----------CN02 EMAIL ADDRESS
-----------CN03 EMAIL ADDRESS
and so on
----JP.BRANCH OFFICE
-----------JP01 EMAIL ADDRESS
-----------JP02 EMAIL ADDRESS
-----------JP03 EMAIL ADDRESS
and so on
----TW.BRANCH OFFICE
and Due to the user account is located in CN.BRANCH OFFICE, it will extend the CN.BRANCH OFFICE contacts level.
Excuse me for bad English, hope you can understand it.
Best Regards,
Bruce

Dogz wrote:
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5.
I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.Getting your current mail system to 'co-operate' in this way will require more time then simply migrating the accounts of users on the current mail system to the comm-suite-5 installation and making use of UWC for Webmail access and ClamAV/SpamAssassin integration within the messaging MTA.
Also the use of Outlook Connector with a non-Sun IMAP backend isn't supported, nor is the use of a non-Sun IMAP backend possible with UWC.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5. Once again I should remind you that CentOS is not a supported platform for comm-suite-5
Regards,
Shane.

Mail created with "Send to Mail Recipient" disappear and are not sent

I have a small setup with a SBS 2011 server (Exchange 2010) 10 users with Windows 8.1 and Outlook 2013.
One user is trying to send mails with attachments to his college´s
but they are never send, are not shown in sent items and can not be found on the server.
The user right click on a PDF file and press "Send to Mail Recipient" Outlook opens his mail is entered into the receiver (internal receiver) and press send. The mail do not show up and as mentioned even in sent items.
I then try to do the same but send through the address book in Outlook / Exchange and these messages appears as they should.
One week later, the disappeared mails suddenly appears in the college’s mailboxes and it turns out there are some mails to external addresses as well, which were not sent until a week. All messages are now in sent mail but they have not
appeared anywhere else before.
I did some tests with the "send to" function which also had the mails disappearing - those mails has not turned up until now. (a week ago)
Now the user (AND all colleagues) are very nervous that something is wrong with their system and the mail does not arrive.
It is only 1 user this has affected but he is responsible for the majority of sales in this company and they are very afraid that they are not responding correctly to large customers.
Is there anyone who can help with debugging in such a case?
I have tried repairing Outlook, started in safe mode, checked the mail server for hanging mails but nothing shows any errors.
Thanks in advance.
Michael Grøn
Michael Gron

Hi,
Have the user logon OWA and send the attachment, will this issue persist?
Please also confirm if the issue exists when inserting an attachment when composing a new email isntead of using the "Send to Mail Recipient" function.
Since only one user has been affected, use MFCMAPI to find if the message is stuck in the user's mailbox:
https://mfcmapi.codeplex.com/releases/view/118446
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Pop accounts and .Mac with Mail system

Iv been trying to learn how to use my iBooks 'mail' system with both my Gmail and .Mac accounts. But, keep coming up with more questions than I can find answers to.
1. Why doesn't mail that I receive or send from my 'mail' programme show up when I go to .Mac and open the mail there? Shouldn't the mail be in both?
2. Same question for folders that I created in both .Mac and the 'mail' system.
3. When using the 'mail' system with POP accounts does deleting mail automatically also delete the mail in the original POP account. In other words if I have the 'mail' system set to delete POP mail for a Gmail account does that also delete the copy over in Gmail?
Just trying to figure out how the 'mail' system works in relation to if I use .Mac. Also, in relation to Gmail. I'm learning that when I'm in .Mac things aren't quite the same.
Thank for the help in advance.

You can access multiple accounts with the Mail.app and each account has its own webmail access that does not reflect all mailboxes available with an email client such as the Mail.app. It is impossible for webmail access with your .Mac account to reflect your Gmail, Yahoo or any other non-.Mac account mailboxes or any user created "On My Mac" location mailboxes which are stored locally on the hard drive.
The same when accessing your Gmail or Yahoo account via webmail access using a browser. Doing so will reflect your Gmail or Yahoo account mailboxes only.
When logged in to your .Mac account via webmail access using a browser, it will reflect your .Mac account's inbox mailbox in Mail and any other .Mac server stored mailboxes in Mail which are located under your .Mac account named icon in the mailboxes drawer only. It will not reflect the mailboxes for any other account, any imported mailboxes or user created "On My Mac" location mailboxes.
> Sounds like what you're saying that in order for both .Mac and my mail.app to sync they both have to be marked ".Mac account" and not "on my Mac". That way they both operate from the main Mac server. Am I heading in the right direction?
Not exactly.
The Mail.app mailboxes drawer includes the following in this order:
* Inbox
* Drafts
* Sent
* Trash
* Junk (only if Junk Mail is set to automatic)
* Smart Mailboxes (only if you have created and are using any Smart Mailboxes)
* Imported Mailboxes (only if you have imported any mailboxes)
* User Created "On My Mac" location mailboxes.
* .Mac account named icon
The Inbox mailbox for each account is located under Inbox in the mailboxes drawer regardless the account type. Open Inbox in the mailboxes drawer by selecting the black triangle beside it pointing it down to reveal the account named Inbox mailbox for each account. Selecting an account named Inbox mailbox in the mailboxes drawer reveals messages received by that account only in the message list. Selecting Inbox in the mailboxes drawer reveals a blended Inbox mailbox for all accounts.
Your .Mac account's Inbox mailbox in the mailboxes drawer is synchronized with the server which is the same behavior with any IMAP account. Messages in your Gmail or Yahoo account's Inbox mailbox are downloaded from the server, not synchronized with the Gmail or Yahoo servers and the same with any POP account. It is impossible for your .Mac account to synchronize the Inbox mailbox for a non-.Mac account.
Go to Mail > Preferences > Accounts and under the Mailbox Behaviors tab for your .Mac account preferences, if you don't store Drafts, Sent, Trash and Junk messages on the server with your .Mac account when using Mail, the account's Drafts, Sent, Trash and Junk mailboxes will be available under the Drafts, Sent, Trash and Junk categories in the mailboxes drawer. All account mailboxes under Drafts, Sent, Trash and Junk in the mailboxes drawer are stored locally on the hard drive.
Open your .Mac account named icon in the mailboxes drawer. All mailboxes under your .Mac account named icon represent/refelect your .Mac account server stored mailboxes when accessing the account via webmail EXCEPT for the account's Inbox mailbox which is located under Inbox in the mailboxes drawer. If you don't select store Drafts, Sent, Trash and Junk messages on the server under the Mailbox Behaviors tab for the account preferences, besides your .Mac account's Inbox mailbox, no other mailboxes are and can be synchronized with the server except for the mailboxes located under your .Mac account named icon in the mailboxes drawer.
When creating a new mailbox, you can select "On My Mac" as the location which is stored locally on the hard drive and will not be synchronized with the server or any server.
Or you can select your .Mac account as the location which will create a server stored mailbox which will be located under your .Mac account named icon in the mailboxes drawer and will be available on the server (via webmail access) and kept synchronized with the server.
No other mailboxes in Mail will be available on the server with your .Mac account via webmail access and this is the same behavior with any email client such as the Mail.app.
> Is this something I should ring up Applecare on to make it simpler to make them match? Or would changing them all to ".Mac account" and the server solve the issue?
Calling AppleCare will be a waste of time because your problem is a lack of knowledge and understanding only. You can't change your Gmail or Yahoo email accounts to a .Mac account with Mail or with any email client since these are separate/different accounts.

Will i be able to use my mail system in tiger os10 after june 30th?

When iCloud comes out June30th what happens to my mail system with OS10 Tiger?

https://discussions.apple.com/docs/DOC-2551

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Mac mail program with complex HTML and ability to send hyperlinks?

Alright, here is the issue I've been struggling with forever.
I'm responsible for sending out my band's emails to our mailing list. I need to add hyperlinks and insert pictures that will show up in the body of the email for both mac and PC users.
In Mac mail with Panther, my hyperlinks come out fine for both Macs and PC users. However, my inserted pictures show up in the body of the email only for other Mac users. Most PC users only see the pics as attachments not in the body of the email.
I've also tried Entourage X, but the opposite problem occurs. Using HTML mode, my pictures always show up in the body of the email for both PC and Mac users, but when I'm in HTML mode there is no way to add hyperlinks.
What is my solution here? Does anyone use other email programs that would allow me to fix the problem. Perhaps I need to compose complex HTML messages in order to ensure hyperlinks and pics appear in the body of emails? If you agree with this, where would I begin to learn how to do this?
Please help!
Danny

I have been searching for how to create custom HTML emails in Mail, in a way that would work with OS 10.3 and 10.4, so as not to rely on the user having Tiger. After reading through many posts, I came up with a script that creates a new HTML message that you can still edit in Mail itself before sending, and you don't need Safari 2. I'm new to scripting so please let me know if this is useful.
Jodain
Part I: defines the HTML code; you can make something in the script itself as long as the string this_html ends up in proper formatting. I actually came up with this primarily for pasting most the html code in the script itself, with a few changing variables. If you do paste or type html code in the script, make sure you use \\ for every \, and \" for every ". If you're using TextEdit to alter the html, use find and replace in that order (\:\\ then ":\").
Part II: builds a message in Mail with the html content... an undocumented property of a Mail message. However, it only works when visibility is false, so unless you send it right away, the user is not able to still type the recipients and edit the body in Mail as he/she might be used to. Which brings me to...
Part III: takes the saved draft and opens it up for editing. The open command only lets you view the message, even if it is outgoing, so I had to come up with a work-around so you can still edit as if you're composing it for the first time.
--Part I
tell application "Safari" to set this_html to source of document 1
tell application "Safari" to set this_page to name of document 1
--Part II
tell application "Mail"
activate
set theMsg to make new outgoing message with properties ¬
{subject:this_page, html content:this_html & ¬
return & return, content:""}
tell theMsg to make new to recipient
save theMsg
--Part III
if not (exists the front message viewer) then make new ¬
message viewer
tell front message viewer
set selected mailboxes to {the drafts mailbox}
set sort column to date received column
set sorted ascending to false
delay 3
set selected messages to {first message}
tell application "System Events" to tell process ¬
"Mail" to keystroke return
end tell
end tell

Sending SmartForm as E-mail attachment, with email subject and content

Hi,
I'm, e-mailing a SmartForm using the SmartForm parameters (MAIL_RECIPIENT, MAIL_SENDER and MAIL_APPL_OBJ) using control device 'MAIL'.
Create MAIL_RECEPIENT (swotobjid): CREATE_RECIPIENT_OBJ_PPF
Create MAIL_SENDER (swotobjid): CREATE_SENDER_OBJECT_PPF
Create MAIL_APPL_OBJ: This works a little different. The sender needs to have an SAP Office Inbox (SO_USER_AUTOMATIC_INSERT) where a folder is to be created using the marco's swc_create_object and swc_object_to_persistent (INCLUDE <cntn01>).
Everything works fine.
The mail is being send and the SmartForm can be accessed as attachment, the E-Mail subject (as the name of the attachment) is taken from the title of the SmartForm (output_options-tdtitle).
QUESTION *
No they want to change the E-mail subject en change the content(body) of the mail.
Is this possible within the options of the MAIL_APPL_OBJ.
Or do have to rebuild the SmartForm program, get the SmartForm as OTF, rebuild as PDF en mail the PDF to the recepient using the SO_NEW_DOCUMENT_ATT_SEND_API1.
I was thinking of creating a container and set the elements of that container (swc_set_table ?) but I don't no in the end if this woll work.

Refer the following Blog-
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0426134050DB01517382336190791762End?blog=/pub/wlg/1798
generate filename as yesterday's yyyymmdd format, and it must send file with same name with yyyymmdd
You need to use the following UDF to generate yesterday's date-
Imports: java.text.;java.util.;
public String yesterday(Container container)
long oneDay = (long) 1000.0 * 60 * 60 * 24;
DateFormat dateFormat = new SimpleDateFormat("yyyyMMdd");
java.util.Date today = new java.util.Date(System.currentTimeMillis());
java.util.Date yesterday = new java.util.Date(System.currentTimeMillis()-oneDay);
String b = dateFormat.format(yesterday);
return b;
Map this with Content_Disposition as mentioned in wiki.
XI 3.0 message must be executed one a day automatically (for example at 9.00 Am).
Use 'Availability Time planning' for CC as mentioned above.
http://help.sap.com/saphelp_nw70/helpdata/EN/45/06bd029da31122e10000000a11466f/content.htm

Mac Mail doesn't send with parentheses in signature...

I met with someone at the Apple Genius Bar today to try and troubleshoot a problem I've been having with sending mail via Comcast.
In short we were able to find a workaround I decided to post what we concluded in the case that someone else can clarify or benefit from what we learned... which is that any parentheses in the e-mail signature prevents the e-mail from being sent.
We attempted, almost 40 e-mails, of various configurations of the signature which contained a phone number. regardless of its position, formatting including newline characters, when the phone number didn't have the parentheses the mail sent.
And all these tests occurred with a fresh new e-mail account which by default set perfectly every time. Attachments, pasted and graphics, made no difference. All the previous mailboxes were also removed and plans were trashed so we were starting from a clean start.
This is with Mail version 4.5 and OS 10.6.8 on an iMac... I can't go to mail 5 I need to run Rosetta.

I'm getting a similar problem. Snow Leopard Mail for me seems to be choking on large attachments - sending them, forwarding them, or even moving them from one IMAP folder to another.
My mails are getting through, but it takes a long time and they are dragging the whole system to a crawl in the process.

AOL mail doesn't send .doc-files with Firefox

When using Firefox AOL Mail doesn't send .doc-files. Instead a corrupted file with a different size is sent. Any other file type works aswell as sending .doc-files with other browsers works...

I'm getting a similar problem. Snow Leopard Mail for me seems to be choking on large attachments - sending them, forwarding them, or even moving them from one IMAP folder to another.
My mails are getting through, but it takes a long time and they are dragging the whole system to a crawl in the process.

What's with the new edition of Pages using Maverick? Google rejects the files with the following message attached "The reason for the problem: 5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked as its content security threat?

I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.

Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me

Why I can't send any e-mail messages with 6230i?

Hi mates,
I have a Nokia 6230i with a Vodafone Italian sim card in it.
I know for sure that I CAN retrieve messages form my incoming POP3 e-mail server but I can't send any e-mail messages with it.
Any time I try to do that it prompts me an information balloon saying: message failed. Why??
I mean, I properly set up my phone with all Vodafone details but it still does not seem to work.
Any help will be appreciate
Stefano.
P.S.
I can even send and receive MMS and of course SMS too
Solved!
Go to Solution.

thanks mate for your reply
When you say: "Make sure your SP allows sending e-mail"
Do you mean the provider who give me the mail service?
Because I know for sure that with MS Outlook express I can send and recive e-mail with it
Bye,
Stefano.

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine.

How to send sapmails to external mail systems

Hi,
how to send sapmails to external mail systems....
like if we want to mail a purchase order from SAP System to *@yahaoo.com or @.com.
TY.

hi manish,
u can do it.
chk this .
chk this code
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
*& Form f_send_mail
text
--> p1 text
<-- p2 text
FORM f_send_mail .
*store the vendor name, vendor email id , employee name and employee
*email id in the internal table int_crb
Creation of the document to be sent
CLEAR doc_chng.
REFRESH objpack.
REFRESH objhead.
REFRESH reclist.
REFRESH objtxt.
File Name
doc_chng-obj_name = 'SHIPMENT'.
Mail Subject
CONCATENATE 'Shipment Document No.' int_crb_mail-shipdocnum
'Cleared.'
INTO doc_chng-obj_descr SEPARATED BY ' '.
Mail Contents
objtxt-line = 'Hi,'.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CONCATENATE 'Shipment Document Number ' int_crb_mail-shipdocnum
' cleared for move.' INTO objtxt-line SEPARATED BY ' '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CLEAR objtxt.
objtxt-line = 'Regards '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'SAP '.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Completing the recipient list
target recipent
CLEAR reclist.
reclist-receiver = int_crb_mail-empperid. "employee email ID
"wf_empperid.
reclist-express = 'X'.
reclist-rec_type = 'U'.
APPEND reclist.
copy recipents
CLEAR reclist.
reclist-receiver = int_crb_mail-smtp_addr."vendor email id
reclist-express = 'X'.
reclist-rec_type = 'U'.
reclist-copy = 'X'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
COMMIT WORK.
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = ' '
AND RETURN.
ENDFORM. " f_send_mail
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]

Mail system with sender information

Similar Messages

Maybe you are looking for