Mail to a large number of

HI
I was wondering if there exists a software that handles group mails for a large number of recipients (like 400 adresses) at one time.
I think mail doesn't accept more than 50 adresses /mail at a time.
I used to use a PC based software called sarbacane designed for mass emailing (not spamming, that's understood .. !), with charts, statistics and remailing automatically to adresses that did not function etc ... does that exist for Mac ??
Thank you anyone who has the answer !!
Stephanie

Hello Stephanie
I do the same, and ran into the same problem. It was my ISP that was limiting how many emails I could send at once. I 'think' (because I'm not a tech person) that Mail takes the message and puts 50 or more address at the top. ISPs will see this as a possible spam mail out. I worked around this by creating groups of less than 50 email addresses (using Smart Groups), but after awhile it got very tedious having to sort and create criteria to keep each group to just less than 50.
There are commercial programs that manage large emailings. I use 'Mailings', and it works fine. I know that there are others as well. Most have a free trial version.
Instead of sending one message with lots of addresses, it sends the email multiple times - once to each person in your list. It takes longer (but it works in background, so who cares) but I have been able to send out to hundreds of addresses with no issues. Hope this helps.
Seth

Similar Messages

  • How can I delete all my junk mail or a large number of emails in one go?

    Please can someone tell me if I can delete all the mail in my junk or a large number of mail (100+) in go? I'm so fed up of spending 5-10 mins just selected each mail and deleting it one by one!
    Please help or apple update ASAP. Even old school phones have a delete all button!
    Thanks :)

    Lulu6094 wrote:
    Even old school phones have a delete all button!
    But the iPad mail app does not have one. You must select them one at a time.
    http://www.apple.com/feedback/ipad.html

  • Problems when sending e-mails to a large number of...

    Hello, I've noticed that I have a problem sending e-mails to multiple users, such as when I choose a group to send to instead of single users.
    Also, when I reply to all, I can see all the recipients and the subject (everything is still intact when I check my sent messages after it's sent as well), but when I log onto my Gmail and check, the sent e-mail has no subject and is only sent to a few of the recipients.
    Anyone have any idea what's wrong?

    Bump

  • Mail - how to send to large number of recipients?

    How can I send an email to a large number of recipients that I hold addresses for in a document without a) adding them to my contacts, and b) so that they can't all see each others addresses?

    I thought about using BCC, but it seems a little messy although it would do the job.
    Messy how?  That's exactly what it's for.  In fact, there's no other way to hide addresses from other recipients of the message.  The only other way to do it would be to script automated sending of one message per address, and that would get quite messy!
    What is the maximum number of recipients that Mail can handle?
    There's no limit enforced by Mail, AFAIK.  The limits come from the SMTP server you're using.
    One of the issues I had when using Outlook on Windows for this by copying and pasting from a text document, was that if there was an invalid/non-existent address in the list, it would just return an error and I was never quite sure if the whole thing didn't send, or if it was just to the dodgy address(es).
    In Mail, you'll just get a bounce message for any addresses that don't exist.  The one exception to that is addresses on the same server that you're sending from...  often, the server will simply reject the attempt to send to an address that it knows doesn't exist.  I'm not sure what kind of message the server returns in that case, though, and suspect it depends on the server.  It's been a while since I've seen such a problem.

  • How to add a large number of keywords to the e-mail filter?

    Hello.
    I would like to know how to add a large number of keywords to a filter.
    The thing I want to accomplish, is it to add around 4000 e-mail addresses to a filter list, which checks the body of incoming e-mails, which get forwarded to me.
    I don't want to outright delete them, but I would love it if it detects that the forwarded message contains one of the e-mail addresses, it would add a tag to the message.
    Is it in any way possible to make a filter like this, which doesn't slow Thunderbird down to ass-crawl speed?
    I tried to copy the whole list into the small filter tab, but It had no discernible effect on my messages, since some of the previously received ones, which I was sure contained the keywords, were not tagged. All it did was make the program super slow and I was forced to delete the filter.

    You can look at creating a exclusion crawl rule:
    http://technet.microsoft.com/en-us/library/jj219686(v=office.15).aspx
    You can also modify your content source starting addresses and remove onedrive:
    http://technet.microsoft.com/en-us/library/jj219808(v=office.15).aspx
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • TS3274 Why does the e-mail i-con on my ios 7.0.2 show a large number of e-mails, 3890, when I only have 3. All other e-mails have been deleted.

    Why does the e-mail i-con on my ios 7.0.2how a large number of e-mails (currently 3898), when I only have 5?  All other e-mails have been deleted.

    Hi, Farticus10. 
    Thank you for visiting Apple Support Communities. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue persists, try the remaining steps the attached article. 
    Cheers,
    Jason H.

  • How can I delete a large number of messages from my iCloud mailbox in bulk mode?

    I decided that I have a large number of e-mail messages in my iCloud mailbox that I do not need anymore and I would like to delete these messages in a single - simple move. How can I do it (Gmail offers a nice way to do this but I cannot find anything similar in iCloud...)?

    Archive the contacts you have in Address book, then delete them, they will be removed from iCloud as well. Restore the archive

  • I have saved a large number of cd on an extermal drive via my laptop. I have now moved my external drive to my desk to but I tunes does not find all the CD i have saved on the external drive

    I have saved a large number of cd on an external drive via my laptop. I have now moved my external drive to my desk to but I tunes does not find all the CD i have saved on the external drive

    Depending on which email client software you use
    the files should be in 'your home folder' library, esp.
    if you use Mail application.... ~/Library/Mail
    Since you don't specify what mail application,
    that would most be associated with the file.
    I notice there are some items to the right of your post
    where it says "more like this' so that may be worth a
    look to see if similar issues were answered. Also, the
    Help viewer in your system is a searchable database.
    Seems that google also brings up fair information, too.
    Do you have a complete bootable clone of your entire
    Mac system on an externally enclosed hard disk drive?
    Good luck & happy computing!

  • Sending large number of emails from SharePoint

    Hello,
    I am in a situation where we have to develop a solution using client side/ootb features of SP 2013 to send emails to a large number of users from a SharePoint list. The list will have 10000+ user information logically grouped. The user should be able
    to select anyone or many groups to send emails notification. Each group can contain close to 5000+ user emails. The list can contain email ids of people outside the organization so SP groups cannot be used. Can you suggest a clean solution that will not
    have a serious performance impact? Nintex workflows can also be considered if it will not affect the performance and if it is reliable in this situation. Appreciate any pointers/approach.
    Thanks,
    Aj
    aju

    Hi
    create a powershell script to send these mails.
    http://www.ehow.com/how_8510132_send-email-powershell.html
    If you need more details, let me know
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • Mail: how is the number # of each mail in a mailbox assigned?

    Hi there,
    Today I have finally transfered all my POP3-mailboxes into IMAP mailboxes.
    I did this by setting up new IMAP Accounts in mail and then just draging the old mails from the POP3-accounts into the new IMAP account.
    Now, strangely out of my 3 transfered mailboxes, in one mailbox the mails have a reverse number order and i want to fix it.
    Let me explain: in mail, in my inbox, i see a continuing number under the "#" sign for every mail. that number seems to be assigned according to the order oder which the mails have arrived.
    in the general inbox, everything is thrown together. So the numbers will look like this
    5763
    1
    2
    7382
    3401
    3402
    3
    3404
    4
    5
    That symbolizes different numbers from different accounts - well, i just would like to know, how i could sort of re-sort this particular mailbox, where the neweset mail has the number "1" - with all other mailboxes, the oldest mail has number "1", so i really wonder how that happened.
    Anybody knows what i am talking about? ;-)
    thanks
    btw of course i run lion 10.7

    u see this : http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f2e5446011d189700000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f2e5446011d189700000e8322d00/frameset.htm
    Madhavi

  • Add tcode to large number of roles

    Hi all,
    Is there a way to add a tcode to large number of roles (around 20) using pfcg? It would be great if I can do it once instead of modifying role by role.
    Thanks.

    Yes, You can actually write a ABAP program, but bottom line is that you cant edit more than one role at a time in PFCG.
    The program would also have to edit one role at a time

  • How to handle a large number of query parameters for a Browse screen

    I need to implement an advanced search functionality in a browse screen for a large table.  The table has 80+ columns and therefore will have a large number of possible query parameters.  The screen will be built on a modeled query with all
    of the parameters marked as optional.  Given the large number of parameters, I am thinking that it would be better to use a separate screen to receive the parameter input from the user, rather than a Popup.  Is it possible for example to have a search
    button on the browse screen (screen a) open a new screen (screen b) that contains all of the search parameters, have the user enter the parameters they want, then click a button to send all of the parameters back to screen a where the query is executed and
    the search results are returned to the table control?  This would effectively make screen b an advanced modal window for screen a.  In addition, if the user were to execute the query, then want to change a parameter, they would need to be able to
    re-open screen b and have all of their original parameters still set.  How would you implement this, or otherwise deal with a large number of optional query parameters in the html client?  My initial thinking is to store all of the parameters in
    an object and use beforeShown/afterClosed to pass them between the screens, but I'm not quite sure how to make that work.  TIA

    Wow Josh, thanks.  I have a lot of reading to do.  What I ultimately plan to do with this (my other posts relate to this too), is have a separate screen for advanced filtering that also allows the user to save their queries if desired. 
    There is an excellent way to get at all of the query information in the Query_Executed() method.  I just put an extra Boolean parameter in the query called "SaveQuery" and when true, the Query_Executed event triggers an entry into a table with
    the query name, user name, and parameter value pairs that the user entered.  Upon revisiting the screen, I want the user to be able to select from their saved queries and load all the screen parameters (screen properties) from their selected query. 
    I almost have it working.  It may be as easy as marking all of the screen properties that are query parameters as screen parameters (not required), then passing them in from the saved query data (filtered by username, queryname, and selected
    item).  I'll post an update once I get it.  Probably will have some more questions as I go through it.  Thanks again! 

  • I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

    I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

    Does this involve iPhoto in some way?

  • I am trying to delete a large number of songs from my Itunes library without having to delete them one at a time.  How do I do that?

    I am trying to delete a large number of songs from my itunes library without having to do it one at a time.  How can I do this.  All of my songs have check marks by them.  Help!

    Then I suspect you do not have iTunes Match enabled. Using that "delete all" command in the Settings does not remove the music from the cloud, nor does it disable iTunes Match. With iTunes Match enabled you will still see all the music.
    So go to Settings > iTunes and App Store and make sure iTunes Match is set to ON (green).

  • I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter.  If that is the case then something is wrong with iPhoto or your perhaps your library.
    How large a date change are you putting in?  iPhoto currently has an issue with date changes beyond about 60 years at a time.  If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
    If that is not the case:
    Remove the following to the trash and restart the computer and try again:
    Home > Library > Caches > com.apple.iphoto
    Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
    ---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
    Let me know the results.

Maybe you are looking for