MAIL TO FILE SCENARIO--3 MAILINBOX configured in the same Outlook

Hi All,
I have a below requirement :
A vendor is sending an e-mail with attached an invoice (PDF, TIF, etc) to a common Outlook (But can have several mailboxes: eg abc@xxx. com ; xyz@xxx .com)
When a new email arrives in these inboxes (Note : Same Outlook Server ), XI needs to pick up the attachment of the unread mails and place it in the network folder.
I did go through this SDN Link (Mail to File Scenario ) : http://wiki.sdn.sap.com/wiki/display/XI/StepbyStepMailToFileScenario , but have few queries:
- Mail Sender CC should be configured as IMAP4 to read the unread mail , pick up the attachment and place it in network folder.
-Here , how do we configure for several inboxes of same Outlook..?
-Secondarly i believe , mapping is not required in this case as xi just picks up the attachment and place in File location.
Could you please me any info that meets this requirement .
Thanks,
Vara

Here , how do we configure for several inboxes of same Outlook..?
Configure as many sender mail channels as the number of mailboxes.....each pointing to a different mailbox.

Similar Messages

Problem during mail to file scenario

Hi all,
I ve done all configurations but it is showing an error in the Modules tab....
ModuleProcessorException: Error during processing local bean: localejbs/AF_Modulews/PayloadSwapBean caused by:

Hi Sathish,
Go through the links for ur developments.
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
Mail-XI-file scenario
Email Adapter Throwing Error
Error during configuration of Sender Mail Adapter
regards
sreeni

Receiver Determination Problem In Mail to File Scenario.

Hi All,
I am trying to do Mail to File Scenario. I defined two business systems, one s/w component in SLD and in IR I defined a DataType , MessageType and Two MessageInterfaces. In ID these are mail adapter settings I gave :-
Message Protocol :- POP3
Message Protocol :- XIPAYLOAD
MAIL ATTRIBUTES -- Enabled checkbox for "Use Mail Package"
                                Content Encoding - "base64"
                                Enabled checkbox for "Keep Attachments"
DEFAULT XI PARAMTERS --
                                Default Interface Namespace -- http://mtf
                                Default Interface Name         -- mtf_mi1
And in Modules Tab I also defined the "PayloadSwapBean" module and swap.keyName and swap.keyValue.
Infact I followed all the steps specified in /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
But in SXMB_MONI this is the error I am getting :-
<b><?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error></b>
Please help me out.
Thanks All,
Madhu.

Hi,
Please verify letter by letter if you haven't make a typo here:
Default Interface Namespace -- http://mtf
Default Interface Name -- mtf_mi1
please also make a test of your scenario in integration directory
please also do not use best efort quality of service
/wg
Message was edited by:
        Wojciech Gasiorowski

I own a ipad mini and a iPod touch , both configured on the same apple account, how do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the ipod

I own a ipad mini and a iPod touch both configured on the same id
How do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the iPod touch when the iPod is connected to a wi fi connection

Mail: do not have the same account loaded onto the two devices.
Photos: go into Settings->Photos & Camera->and turn off photo stream.
everything else, sign out of the Apple ID on the device you dont want to be visible.
good luck

TS1702 i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?

i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?

i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?

Can you transfer files between two user accounts on the same macbook pro?

Can you transfer files between two user accounts on the same MacBook Pro?
Specifically, I used the Migration Assistant to move music and photos from my old PC to my new MacBook.
Somehow, I missed the fact that it was creating a new user account when it was doing this. So none of music and photos are in the user account I originally set-up. Instead, all these files are now in a different account.
I'd like to consolidate all my files on the one user account and delete the other one.
Is this possible and, if so, how do I do it?
Thank you.

you can crop files from one account to another using the Public Dropbox which every user account has. Log into the user that has the files you want to move, then drag the folder you want to the new users' dropbox:
I suggest a small scale test on a few files first before moving gigabytes of files.

How do I share files between computers (mac's) on the same wireless network?

How do I share files between computers (mac's) on the same wireless network?

Turn on File Sharing in System Preferences - Sharing, then you should be able to see them in the other Macs' Finder sidebars (under Shared). Click on them, click Connect As, and log in with the user credentials you're sharing from.
Matt

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Is it possible to convert several pdf files (into Excel or Word) at the same time ?

I'd like to convert several pdf files (up to 500) into Excel at the same time. Is it possible ? How many files can Export PDF handle at the same time ?
Thanks a lot for your answers,
Sylvain

Hi, Sylvain.
This is a great idea! Currently, ExportPDF only can export 1 file at a time. (Acrobat can do a batch export using it's Action Wizard feature.)
I added your idea to our idea list: http://forums.adobe.com/ideas/1499. If you'd like to see us add this feature, please go vote or add comment to this Idea on the idea list.
Dave

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone

Make a file extension to open always with the same app

Hello, do you know how can I make a file extension to open always with the same app. So far I have been doing it by double click > open with > other > and then mark open always with this app, BUT
I do not want to do this very time with all the same file extension I have in my hard disk, is there any way, like in windows, to select and preset a determined app to always open all files with the same extensión in my hard disk??
Actually what I´m experiencing and would like to change is to open always .pdf extensión with Acrobat and not with Preview
Thanks very much in advance for your help!!

OK!!!!
Got it!!!
Thanks anyway!!

The files in finder windows all have the same icon

Hi, the files in finder windows all have the same icons. Sometimes the icon will change when I drop a new file in a window. But I have no control over that. Any cue?
Thanks

I also rebuilt the Launch Services Database. It worked for the icons already in folders (and finder windows), but when I put a file from the desktop in one of these folders, the file does not have the correct icon.

Can Group1 and Group2 of the PCI-DIO-32HS 6533 card be configured at the same time?

Can the PClk1 and PClk2 run simultaneously when both groups 1 and 2 are configured?

Tmax,
Yes, both Group 1 and Group 2 of the PCI-DIO-32HS can be configured at the same time. Furthermore, both PCLK1 and PCLK2 can run simultaneously.
Good luck with your application.
Spencer S.

Why are ACR PSD files 10-20 percent larger than the same file resaved in PSD?

Why are ACR > PSD files 10-20 percent larger than the same file resaved in PSD? I posted this many years ago and never found an answer. Now that my drives fill up quicker, I thought I might chase this question a little bit further.
Same .CR2 saved within ACR either with cmd-R or open ACR within PSD, the saved file is 34.5mb. Resave that same file (no edits) within PSD either with or without Max-compatible and the file is now 30.7mb. Another file that is 24.5 becomes 19.5MB.
Why the difference? Is ACR and PSD actually using different compression strategies?
thanks.
Mac 10.8.5 / CC / ACR 8.4.1 - but this has been a consistent behavior over many years and versions, CS6 / CC.
Same .CR2 saved within ACR either with cmd-R or open ACR within PSD, the saved file is 34.5mb. Resave that same file (no edits) within PSD either with or without Max-compatible and the file is now 30.7mb. Another file that is 24.5 becomes 19.5MB.

Hi Jeff
If it is RLE it's not as efficient as LZW:
Saved ACR>PSD = 40.1MB (sample image this AM)
opened in PS and resaved as PSD = 30.8MB
resaved as TIF without LZW = 40.1MB (this adds to your thought that the ACR>PSD doesn't us any compression)
resaved as TIF/LZW = 9.6MB
Jeff Schewe wrote:
I really think your priorities are a bit off. 10-20% is meaningless...you just need to get bigger.... and quit fussing over a few GB's here or there...
??? I hope that the Adobe engineers are fussing over 10-20% efficiencies.
I'm within arms reach to a rack of 40TB of drives (doesn't include off-site drives), and all 2TB drives are being recycled to 4TB drives, as a result the rack is always growing. Actually the ACR>PSD files don't really make a difference in our long term storage, only for the nightly backups. But anyway, how you save, what you save etc. should all be part of the discussion.
.... so in my case, throw in an excess MB here and there and all of a sudden you are talking TB's. Plus advantages in backup times, drive life, and energy use.
Somebody added compression into the PS>PSD format, but it wasn't included in the ACR>PSD format, was it a decision or an oversight? If it's just a matter of making ACR compatible with PS when saving the same PSD format..... then why not?
regards,
j

Is there a way in an unstructered Frame11.0 file to change all anchored frames in the file to a specific size at the same time?

Is there a way in an unstructered Frame11.0 file to change all anchored frames in the file to a specific size at the same time?

Rog,
This is perfect use case for ExtendScript. You could easily iterate over all anchored frames and resize them. You would probably want to resize the contents as well, though, which would add a few extra lines of code.
Russ

MAIL TO FILE SCENARIO--3 MAILINBOX configured in the same Outlook

Similar Messages

Maybe you are looking for