Mail to MRP controller
How I configure mail to MRP controller for the missing part list in the time of creating production order without work flow
Regards
Amitava
Hi
In CO01 > Click on Go to > Missing Parts > Missing Part list
In Nxt Page Click on List > Send to > Mail recipient
In the Recipient tab enter SAP user id of MRP Controller and Recipient type SAP Log on name and click on Send icon at Top left.
SAP Mail will go to MRP Controller SAP Work place in box.
Regards
Brahmaji
Similar Messages
-
Activate workflow for mail to MRP controller
Hello Experts
I am configuring to activate workflow for mail to MRP controller, I am not able to activate event linking. Does any one know how to activate linking? Any help is appreciated.
Thanks
AnkitHello,
SAP Business Workflow enables the design and execution of business processes within SAP application systems.
Please find the below links for activating workflow:
http://wiki.sdn.sap.com/wiki/display/ABAP/SAPBusinessWorkflow
http://www.scribd.com/doc/10922731/Simple-SAP-Workflow
Regards,
Alok Tiwari -
Workflow for Mail to MRP Controller
Hello Experts
I am configuring to activate workflow for mail to MRP controller, I am not able to activate event linking. Does any one know how to activate linking? Any help is appreciated.
Here is configuration path
SPRO - Materials Management - Consumption Based Planning - Evalution - Activate workflow for mail to MRP controller
Thanks
AnkitHi,
If you follow the steps and click on 'Assign Agents' it list the workflow template that is triggered e.g. WS03100020. If you open the builder (transaction SWDD) and view workflow WS03100020 you can see that there is no triggering event specified so you cannot activate the event linkage.
Also the object used in this workflow is BUS1001and not BUS3020. If you want to trigger this workflow then you should check what event should triggered it and add it to the workflow via SWDD => Basic Data => Triggering events.
What transaction should trigger this workflow? Switch on your event trace and recreate thje scenario. See what events are raised and see if one can be used to trigger the workflow. If no events exist then try to find user Exit or BAdi and trigger your event using function module SAP_WAPI_CREATE_EVENT or use SAP_WAPI_START_WORKFLOW to trigger event directly without events.
Regard,
Eddie -
Automatic sap mail to mrp controller
Hai friends
After MRP run automaticaly mail trigger to mrp controller .
For this requirement ,what are the settings needed ?Hy,
For trigering automatic SAP mail to MRP controller you have to go with User Exit,
User Exit for MRP is
User Exit is M61X0001
Function Module EXIT_SAPLM61C_001 and
Include ZXM61U02
In above Include you have to apply funbction module which triggers the automatic mail
Some of the Function module relevent to sending mail are,
/SPE/TPOP_SMTP_SETTINGS_READ
BAPI_BUPA_SEARCH
BAPI_BUPA_SEARCH_2
BKK_ACCNT_STAT_GET_EMAIL
BUPA_PARTNER_CONTACT_SEARCH
CRM_IC_EMAIL_LINK
EXIT_SAPLBPFC_001
EXIT_SAPLEL35_003
EXIT_SAPLFCIM_280
EXIT_SAPLJGWWW_004
EXIT_SAPLMLSX_010
EXIT_SAPLMLSX_011
EXIT_SAPLVED4_004
EXIT_SAPMJGWWWIU1_016
EXIT_SAPMJGWWWIU1_017
FTR_MIR_EXECUTE_MESSAGEMAIL
HR_EFI_BC_POLL_MAILBOX
HR_EFI_XI_POLL_MAILBOX
HR_FBN_GENERATE_SEND_EMAIL
HRIQ_STUDENT_EMAIL_GET
HRWPC_RQ_MAIL_TO_MANAGER
QFOA_MAIL_REJECTED_RESULTS
QFOA_MAIL_SENDING
QFOA_UD_LONGTEXT_SENDING
WFDBP_GET_GROUPWARE_EMAIL
WFDS_GET_GROUPWARE_EMAIL
I don't know the total function but I am trying my best and share the knowledge upto my best level.
For completing the total function you have to take help of both Abaper and basis person.
We have also set automatic mail function not for MRP but for DMS.
Regards,
Dhaval
Edited by: Dhaval on Jun 24, 2008 11:19 AM -
Trigger mail to MRP controller if Scheduled job for MRP fails
How to configure Triggerring of mail to MRP controller if Scheduled job for MRP fails ?
Dear Feby,
Check this links to create a distribution list and to assign the same during background job scheduling in SM36 for the program
RMMRP000.
Re: Settings to be done for sending mail to external system
Re: problem in background run
Regards
Mangalraj.S -
Email notification to MRP controller for [Missing Parts]
Hi All,
Is it possible can we configure a setting to send a mail to MRP controller at the time of missing parts, while Issuing a goods to production order.
Thanks in AdvanceHi madan
IT is possible to config mail for your MRP controller. This can be done in create User authorization . Please consult your Basis consultant.
Regards
J. Saravan -
HI ALL
We need to configure a missing parts mrp controller who receives a mailgenerated by SAP automatically when ever MISSING GOODS?ITEMS for an order are received in plant.
Thanks in advance
Suryanarayana Tatahi!
u check spromaterial management consumption based planningevalutionActivate workflow for mail to mrp controller.
i hope this will work
regards,
pankaj -
Hello Experts,
I want to change the mrp controller for recieving mail through output type MLFH . .. current mrp controller is no longer with company so can anyone guide me the step by step process
Will award full points
Thank You
JustinHi
for changing the MRP in MLHF go to T-Code NACE then select Application MEthen presscondition record on top. a pop up opens in that select your out out type double click on MLHF. it will ask for missing parts then Give X and execute it will open up a new screen then you can change your existing MRP controller to your new MRP controller.
by doing this you will be able to send mails for missing parts to your new MRP controller.
hope i made it clear
Edited by: vikrama sharma on Dec 21, 2007 1:02 AM -
MC.9 report is showing -ve value when MRP controller selected
Hi Expert,
I'm confuse about the -ve value in MC.9. If i run by using Plant as the selection parameter for month 02.2010, then sorted by valuatted stock value(ascending), it will not show me the -ve value for all materials. But if i run the report by using Plant and MRP controller as the selection parameters,then sorted by valuated stock value(ascending), it shows me the -ve value. why?
Please explain.
Thankshi jurgen,
i still not clear. I try to run the report for material A and mrp controller 001. I got the -ve value. But when i run the material without mrp controller, it shows 0. no -ve value. i check in MM03,changes history for the material. MRP controller has been changed few times but the latest is 160. What am i confusing is, what is the relation between MRP controller with the report? What is the function of the report actually? Isn't it suppose to give the same data either i put the MRP controller or not when running the report?
Thanks -
Report for MRP controller and relevant purchasing document
HI
My requirement :We have MRP controller for different diciplines(mech, electrical, Instrumentation.......ect).
I want to search for a report Where it display me the Purchasing document(PO) number by respective decipline.
I tried all the report in MRP controller such as MC.E, MC.D, COOIS.........ect
Thanks in advance
MujeebHi Mangalraj
Thanks for your answer, but my question is not yet answered.
As you told i did follow accordingly.
When i enter the T.code: ME5A ( i can not find the scope of list ALV but did find the entried as below)
A 3-line + n special
B 2-line + n special
B1 2-line + 2 MRP list
B2 2-line + 2 stock/rq.
B3 2-line + 2 purch.dt.
C 1-line
C1 1-line + stock/rqts.
D
F Collective release
G 3-line loop
H 2-line loop
I 1-line loop
If i select "C" from the list i'm getting 1 line display but as you told i did press the CTRL+F8 but unable to get the cost) it does not work at all like dat.
I'm using the system version 4.6C. Can you please suggest something on the report.
Thanks & regards,
Mujeeb -
Inventory report for the selection of requisitioner and MRP controller
Hello Experts,
Can someone please help me with a standard Inventory report in which we can give input thr requistioner and MRP controller
regards,
YKHi,
You will get the requisition no. from EKKO (provided PO has been created otherwise you won't get any record). Find out PO & item no. for the requisition item. Then you can check EKBE table whether GR has been posted or not. If GR has not been posted then there won't be entry in EKBE for that PO & item.
Regards,
Rakesh -
How can i display the MRP controller in transfer order print?
Dear all:
When i print the transfer order(Tcode: LT31) ,i want to display the MRP controller in the output form.
How can i get that ?
I found the user exit MWMD0001 and add the code in the include like this:
select single dispo from marc
where matnr = ltap-matnr
and werks = ltap-werks.
zdispo = marc-dispo.
But caz the "zdispo" could not been brought to the "print form " of the report RLVSDR40 which control the print LT31.So ,i failed.
Anyone advice?The problem is as zdispo is declared in your user exit it doesn't become available. Had it been declared variable in the include of the program for LT31 you would be able to use it directly in the script.
Try doing this instead in your layout set.
/: PERFORM MRP_CONTROLLER IN PROGRAM ZABCXYZ
/: USING <AP-MATNR&
/: USING <AP-WERKS&
/: CHANGING &ZDISPO&
/: ENDPERFORM
in your program ZABCXYZ.
FORM MRP_CONTROLLER tables in_par structure itcsy
out_par structure itcsy.
tables: marc.
data: matnr like marc-matnr.
data: werks like marc-werks.
READ TABLE IN_PAR WITH KEY LTAP-MATNR.
CHECK SY-SUBRC = 0.
MATNR = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY LTAP-WERKS.
CHECK SY-SUBRC = 0.
WERKS = IN_PAR-VALUE.
select single dispo from marc
where matnr = ltap-matnr
and werks = ltap-werks.
IF SY-SUBRC = 0.
READ TABLE OUT_PAR WITH KEY ZDISPO.
CHECK SY-SUBRC = 0.
OUT_PAR-VALUE = MARC-DISPO.
ELSE.
CLEAR OUT_PAR-VALUE.
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
This should work. -
Hi Experts,
Currently we run Program 'RMMRP000' as a batch job to create Planned orders and requisitions.
The client wants that Planned orders and Requisitions should be created for a particular MRP controller and for all the others only Requisition is to be created.
I implemented Exit 'EXIT_SAPMM61X_001' in the following manner by passing MRP controller to user_key.
IF mt61d-dispo <> user_key.
no_planning = 'X'.
ENDIF.
But as you can see that this will not meet my client requirement.
If any of you has worked on similar requirement / if any one knows that this is achievable or not,
please share your inputs.Moved from SAP ERP Sales and Distribution (SAP SD) to ABAP Development
G. Lakshmipathi -
Hi Guru's,
We are facing one issue for Manual PR - MRP controller
I have material Exam. Aluminum (Material Master MRP controller is AM4), after MRP run it's generated Auto PR correctly, no issue
but, some time we are raise Manual PR on this same material Aluminum, MRP controller it's take from Material Master,
we need to restirct user wise (only manual PR), for example particular user raise maula PR on this material MRP controller is to be take SS4 not AM4, any way to assign user wise?
i understand can't maintain two MRP controller for one Material
how to solve this? pls advise
Regards,
SankaranHi kallam,
I´m facing a similar problem.
could you please share some more information how you did it?
thanks
Alex -
Purchase requisition with MRP controller
Hi everybody, I need support because I have to control during purchase requisition to block users with specific MRP controller.
I mean, user A only have permission to create purchase requisition with MRP controller Z and user B only have permission to create purchase requisition with MRP controller Y.
Thanks for all the ASAP cooperation.
Regards.Hi Mitra,
You will find your answer here.
MRP controller for PR document type
Do let me know if it helped, as I might have to explore this option for an upcoming requirement.
Thanks
Shailesh
Maybe you are looking for
-
Hi, I have the iphone 4 and I manually deleted all the voice memos on my iphone but they still appear on my iphone when I open Itunes on my computer and they still take up space. I am soon running out of space. Any ideas to permanantly get rid of som
-
Hallo We are with BT for most of our lives. We connected internet on our address around 10 years ago and at the tome we ordered 2MB fixed line. It was best possible speed at the time, tut as a time goes by it got worst and worst and the it should be
-
BPM 11g (11.1.1.4) Workspace loading slow
Hi, I have the following configuration on my local machine; Oracle 10g XE DB Weblogic 10.3.4 64-bit Sun Java 6.0 update 24 (64-bit) SOA Suite 11.1.1.4 While working on BPM workspace for considerable amount of time (say 1 hr), the BPM workspace is res
-
Doh! - No composite or HDMI on my TV. Any suggestions?
I looked at the back of the Apple TV before purchasing it, and saw the composite video out & the HDMI connector. Thought I knew I didn't have either of those on my TV, I didn't think about it, and without putting 2 + 2 together, bought an AppleTV. Do
-
TS1702 why won't an app downloaded on computer sync to my iphone
I just downloaded an app from the app store online, but the app is not syncing to my iphone 4 in order to use it. I need help?