Mail to the current processor

Dear all.
I need to mail to the current processor, when in Change request im choosing SDHF correction and authorize. System creates corresponding SDHF correction. At this moment SDHF correction contain no actions, if i press edit button actions appears. But i need it earler.
Work steps:
SLFN - SDCR (mail to current processor)- SDHF...
tried to:
Transaction SDHF use Action profile SDHF_ACTIONS
Created my own action in this A.P.
Processing Time Immediate processing
Processing Times Not Permitted No restrictions
Sort Order For Display     0  
Schedule Automatically = 'X'    
PartnerFunction   SDCD0004
Description       Current Processor
Determination Technology          Determination Using Conditions that Can Be Transported
Rule Type                          Workflow Conditions
Action Merging                     Max. 1 Action for Each Action Definition
start condition
Only status 'Created':
  &CRM Service Process.User Status&  = E0001SDHFHEAD
then inserted in SDHF_ACTIONS Action stack
Regards Sindry
Edited by: Sindry on Feb 21, 2011 10:01 AM

HI Jansi.
Not exactly. But useful info
I need send mail to the current processor, steps to proceed:
1. Create SLFN notification tcode notif_create
2. Create SDCR change request from actions of SLFN
3. In SDCR setting subject = Urgnt Correction and save.
4. Now i choose action of SDCR Authorize change request!! and when i press save corresponding SDHF correction is created.
My needs: is to send mail to current processor right after creation without entering SDHF.
And also moment to discuss: after SDHF correction created in Transaction Data - Actions is EMPTY, only if i press Edit button actoins appear.
I need action that works before pressing edit button, with SDHF creation.
Help plz
Regads Sindry
Edited by: Sindry on Feb 21, 2011 11:38 AM

Similar Messages

  • Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me out

    Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me ou

    no i called the store owner from whom i bought it. he was like i will check in records and if there is something i will let u know...he was like send an e-mail its better so if it was stolen so the shopkeeper wouldnt let me to e-mail to the owner

  • Create a CR for multiple processing with me as the current processor

    Hi
    How to create a change request for multiple processing with myself as the current processor.
    I have created a change request for multiple processing and the ystem throws me the error that "There are no suitable change requests"
    Display help shows the below
    For the upload you need a change request that has the status Considered
    and Approved or To Be Revised and ideally has a type that does
    not have the property Object List Is Binding. If the
    change request does have this property, all the entities that are uploaded must
    already be assigned to this object list.
    Please can someoen guide me on how to fix this.
    I found few threads related to this but cudint understand on how to assign a status to CR
    Thanks,
    Sharma

    Hi Prateek,
    Please can anyone give any pointers on how to set the status of change request (for multiple processing):-
    For assigning the statuses to the change request:-
    Go to t code:- MDGIMG->General settings>Process Modeling>Change Request>Edit status of change request.
    the path you mentioned is to create and edit the existing Change request statuses, what I am looking for is when I create a CR for Multi record processing and try to upload a file I get the error "There are no suitable change requests". and when I check the Status of the change request I created I see that the status is Changes to be executed (Set automatically).
    how can i set myself as the processor.
    tcode: MDGIMG->General settings>Process Modeling>Change Request>Create Change request type. Ucheck the single object checkbox and assign your userid for that CR step.
    Single object is already Unchecked  and I am using BRF+ so when I am the processor First approver is say X, I am not sure if we have any place where we can set ourselves as the user. Please let me know if I missed sumting
    Thanks
    Hi Shephalika,
    Yes I am trying to upload a file and Single object is Unchecked in the Change request type.
    Thanks,
    Sharma

  • Email when Current Processor Changed : Normal Correction

    Hello Team,
    I have a query,
      In ChaRM ( Normal correction  scenario ), if we change current processor field of change request ( even manually ) , then email should go to the processor. Can this be set up? if Yes , Please let me know the procedure?
    Best Regards,
    Tushar

    Daniel,
    I assume that you followed the steps of this blog: Pep Up Your ChaRM - Part 1: HowTo Create a Smart e-Mail Action
    However, if you want to send an email when a processor is changed, then that would involve some development work. What we did here at our company was we leveraged off of OSS note 865619. We used the BADI that was documented in here to do partner comparison, if the current processor is different from the assigned processor, then a flag would be sent to be used later by the conditions.
    Hope this helps.
    Ryan

  • Send EMail when current processor changes

    Dear all,
    is it possible to automatically send an email, every time the processor of an incident is changed?
    Via Action? What conditions should i choose etc.?
    Any help would be much appreicated
    Best Regards
    Daniel Titze

    Daniel,
    I assume that you followed the steps of this blog: Pep Up Your ChaRM - Part 1: HowTo Create a Smart e-Mail Action
    However, if you want to send an email when a processor is changed, then that would involve some development work. What we did here at our company was we leveraged off of OSS note 865619. We used the BADI that was documented in here to do partner comparison, if the current processor is different from the assigned processor, then a flag would be sent to be used later by the conditions.
    Hope this helps.
    Ryan

  • E-mailing report changes current directory

    When I e-mail report the current directory is changed and when
    there is Image in the report it can't be found.
    And the next time I run the report and DESTYPE=File, the file is saved at
    c:\Program Files\Common Files\System\Mapi\1033\NT

    change your registry key entry which says
    REPORTS60_TMP to which ever dir you want

  • How to stop Current Processor role (ChaRM) from updating to current user

    Hi
    We are utilising the Current Processor role in two transaction types (ZMTM and ZMAD) and using these transactions in CRM Web Client UI.
    However, we do NOT want the Current Processor role to update automatically to the current user.
    Here is Partner Determination for ZMTM. As you can see the Current Processor is blank in the Trigger and Access sequence fields. I have also tried filling this in but it didn't make a difference.
    I have also gone into the Automatic Assignment Settings in SPRO
    The Help Text for this configuration is below.
    I have left the configuration blank so I don't want the Current Processor updating (i.e. whatever Business Partner we type in, we want it to stay this way unless we manually change it. No automatic update).
    Despite this, the Current Processor always updates to the Current User in CRM Web Client UI.  How do I change this???
    Thanks all
    Shaun

    Grrr....as soon as I posted this I found the resolution.
    I had to input this into customizing:

  • Win 8.1 2010 Outlook Error message: "Either there is no default mail client or the current mail client cannot fulfill..."

    When trying to open Outlook in Win 8.1 I get the error message: 
    "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
    It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get 
    "Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
    Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.

    Hi,
    To delete a profile, you may try the steps below:
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
    carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
    1. Press Windows key + R to open the Run command.
    2. Type regedit in the Open field and click OK.
    3. Locate the key then right click on it and choose Rename:
    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
    4. Type OLD at the end of the name.
    5. Try opening Outlook and it may prompt that you need to create a new profile.
    I hope this can help.
    Regards,
    Melon Chen
    TechNet Community Support

  • Either there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010

    I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up.  Now when I do a windows search for email, I'm not able to view
    the email due to this message.
    For the record, I am running W7 Ultimate x64 and connected via Excange Server.  I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
    to that.
    What's up?

    Hi,
    I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
    "Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
    set it as the default mail client."
    You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
    I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
    will try my best to help you.
    Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
    Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
    ===================
    1.      
    Click Start.
    2.      
    Type "default programs" in the
    Search box.
    3.      
    Click Default Programs under
    Programs in the search results.
    4.      
    Now click Set your default programs.
    5.      
    Highlight Microsoft Outlook on the left.
    6.      
    Click Set this program as default.
    7.      
    Click OK.
    Suggestion 2: Start the Outlook program in safe mode
    ==============
    1.      
    Click Start, point to All Programs, and then point to
    Microsoft Office.
    2.      
     Press and hold the CTRL key, and then click the Outlook program you want to start.
    If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
    to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
    Disable add-ins
    Click
    File menu, click Options > 
    Add-in, click Go button in the Manage:
    Com-in Add.
    Check if there are any add-ins,
    clear the checkbox to disable them.
    Close the Office program and
    restart it.
    Add one check back each time to the list of Add-In,
    restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
    Suggestion 3: Test the issue with a new Windows user account
    ==============
    We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
    in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
    For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
    For Windows Vista/Windows 7:
    http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
    http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
    Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
    is anything I can do for you, please feel free to let me know.
    Sally Tang

  • Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run ...

    Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
    seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance.  The computer is upgraded (uninstalled first)
    from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).  
    (Links removed to remediations I've tried)
    Made no difference what so ever and the messages continue. What's next? 
    I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead.  I
    was asked some additional questions ing the other forum regarding the problem: 
    Are you able to send mails from other applications like Word or Excel?
    NO
    Is the PC connected to any Domain/Server? YES
    Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
    2013 forum and now this forum)
    Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
    NO
    Also check if the Lync add-in is enabled in Outlook.
    Start Outlook
    Click the File tab.
    Go to Options.
    Click Add-ins.
    Check if the Lync add-in is enabled. YES
    My last posting in the other forum contained the following additional information regarding our problem: 
    As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference. 
    We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
    Other processes that have Outlook plugins may also be the parent of the message popup (third party applications). 
    Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected. 
    It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
    a follow up error message concerning lack of MAPI enabled e-mail. 

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • Wife and I have separate iOS devices, separate iCloud accounts. But we both want to access mail from the iMac (OSX Mavericks.) Currently only my mail is linked. How to configure so that wife's iCloud mail can be seen  on iMac. Simple and explicit please!

    My wife and I have separate ioS devices (iOS7)  with separate iCloud accounts.
    So we access our mail separately on these devices. But we would both like to be able to access mail at the desk top (iMac, OSX Mavericks). Currently only my mail is linked. How do I set up the Mac to allow it to access my wife's e-mail too, either in the same mail inbox or a separate one. Simple instructions please!

    If Mail in Mavericks is the same as earlier versions you can select accounts in the sidebar, so that you can either display the inboxes for individual accounts, or the contents of all the account inboxes. (If the accounts don't show click the disclosure triangle next to 'INBOX'). The layout may have changed since the version I have - Snow Leopard - but you should be able to do the same thing.

  • Either there is no default mail client or the current mail client cannot .....

    Windows7 Ultimate 64 bits, Office 2013 32 bits.
    My issue is that running Outlook 2013 I get the message
    Either there is no default mail client or the current mail client cannot fulfil the message request. Please run Microsoft Office Outlook and set it as the default mail client.
    OK, so this should be straight forward:
    I set outlook at the default mail client and associate all file with it from Outlook\File\Option.  Nope.  That does not work.
    I go through default programs and set the default mail client as Office 2013 and associate all file with it from Outlook.   Nope.  That does not work.
    I check the registry and it shows that the 64 bit or 32 bit reversion is the default mail client.  So that does not help.
    I install the 64 bit version instead of the 32 bit version. Nope.  That does not work.
    I clean the registry and temp file.  Nope.  That does not work.
    I tried: Uninstalled with the Microsoft
    fix uninstall and reinstall. This does not work.
    Contact the phone technical support. This
    does not work.
    Addin,s does not work. Adobe, iCloud Addin ....  does not work.
    'Send email to'   menu   does not work.
    No application communicates with
    Outlook, no Microsoft  or third  apps.
    I can only send and receive emails
    from within Outlook.
    This program is lousy, any
    possibility that my money back.
    Thanks
    Has anyone got any ideas?   All the suggested fixes on this forum do not fix this issue.

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Either there is no default mail client or the current mail client cannot fulfill the messaging request" error message when you send e-mail from Office 2010 in Outlook

    Hi,
    If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
    there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
    Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
    I have followed the below troubleshooting steps but still getting the same error.
    Method 1:
    Followed the  Microsoft fix
    http://support.microsoft.com/kb/813745
    1. On the Windows taskbar, click
    Start > Run.
    2. In the Open box, type the following text:
    3. regedit
    4. Press Enter.
    5. Go to the following registry key:
    6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
    7. In the right pane, right-click
    the following registry value:
    8. PreFirstRun
    9. Click Delete
    10. Click Start, and then click Run.
    11. In the Open box, type regedit, and then pressENTER.
    12. InRegistry Editor, locate the followingsubkey in the registry:
    13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
    14. Select thesubkey, and then pressDELETE.
    15. Click
    Yes.
    Method 2:
    Repaired Office
    Method 3:
    fixmapi.exe. Mapi32.dll
    Method 4:
    Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
    Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
    Method 5:
    Compared the installed applications
    Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86  - 9.0.21022"
    Please help to solve the issue.
    Regards,
    Boopathi S

    Hi,
    Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
    in Office applications, like Excel or Word?
    Is this an issue that come up recently? Have you ever made any changes to your system?
    If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
    http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
    http://support.microsoft.com/kb/223877
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Office 365 Outlook and Adobe 11.0.3 Error: "Either there is no default mail client or the current.."

    If you are getting this message, Error: "Either there is no default mail client or the current mail client cannot fulfill the messaging request.  Please run MS Outlook and set it as the default mail client etc."
    There is a temporary work around and that is to click the "Tools" button and that will hide that pane.
    I contacted Adobe since I have a subscription and created a ticket. I spoke again with the helpdesk represenative and he raised the issue with the engineering team during a meeting that they had today. This compatibility issue will be examined and proposed for a fix in an upcoming release / update of Adobe Reader.
    MD

    Manually setting a new email account per Outlook settings will resolve the error message as well.

Maybe you are looking for

  • Mod-BIOS 790FX-GD70 (MS-7577)

    Mod-BIOS for 790FX-GD70 (MS-7577) Do at your own risk! based on the Beta-BIOS 1.9b2: - update JMicron Option-ROM to v1.07.14 - remove Realtek PXE-ROM v2.26 - add gPXE-ROM v0.9.9 - change AMD AHCI-ROM to v3.0.1540.59 - replace OEM Logo with Svet{BK}'s

  • Error: There was a problem logging on to SAP BusinessObjects Enterprise

    I am trying to use Crystal Reports Enterprise XI 4.0 with BusinessObjects Enterprise 4.0 using a Bex Query on an SAP NetWeaver 7.01 SPS 9 BW system. I have been using the SAP Press book u201CIntegrating SAP BusinessObjects BI Platform 4.x with SAP Ne

  • How to link Vendor Invoice to Customer Invoice in Third Party Sales Custom Report

    I have a requirement wherein I want the Invoice to have as many line items as MIRO have if partial delivery happens... invoices (one for each MIRO).. We are currently using the Third Party with Shhipping notification... I have tried using VF04 for bi

  • Error in First step of Process Chain

    Hi everybody, i have created a process chain with a start process (direct scheduling) to InfoPackage to load into InfoCube-so delete indexes and generate indexes were automatically inserted becoz of default chain option. i have checked the chain-- th

  • Permission denied to "/dev/sr0" on VT6

    I run several SLiM instances on different VTs (virtual terminals) (this is possible with my patch) so I can log in as different users. Of course, I can log in as some user in all VTs. Mplayer (and other video players) does not play a video DVD on VT6